Usb-A To Usb-B

Meross MSG200 smart garage door switch (HomeKit).Get the ability to open and close your garage door remotely. The Meross MSG200 smart switch will allow you to do just that! The product works with Apple HomeKit, Amazon Alexa, Google Home and Samsung SmartThings, so you can add it to the ecosystem you use every day. The device allows you to control up to 3 garage doors at the same time (after purchasing additional sensors) and stands out for its wide compatibility.Better signal, reliable operationThe Meross MSG200 switch is equipped with an external antenna, which receives the Wi-Fi signal better and ensures reliable operation - don't worry about delays or interference. You also don't have to worry about the safety of your children or pets. When the garage door is about to close, the switch will beep so that everyone has time to move away. A high-sensitivity built-in sensor is also responsible for the reliable operation of the product.Wide compatibility, easy installationDon't be afraid of compatibility problems. The switch works perfectly with about 1600 models of garage doors from more than 200 brands. It will work well with both older and newer units. Its installation will also not cause you any trouble - just follow a few simple steps.Convenient operationTurn your ordinary garage door into a smart door. The Meross MSG200 switch will allow you to open and close it remotely - just a few clicks on your phone! The device is compatible with Apple HomeKit, Google Assistant, Amazon Alexa and Samsung SmartThings. So you can manage it from the platform you use most often - no need to switch between apps. Not sure if you closed the garage door before leaving for work? Now you can do it with your smartphone!Included Smart garage door switch USB adapter Garage door sensor with cable Clamp Test cable Double-sided adhesive tape Screw x4 User manual Manufacturer Meross Model MSG200 Input 5 V / 1 A DC or higher Button 1x Reset button LED 1x LED status indicator Dimensions 9.3 x 7.8 x 2.2 cm Power cable length 1,5 m Sensor cable length 5 m Wireless communication standard IEEE 802.11 b/g/n, 2.4 GHz, 1T1R Security Support for 64/128 bit WEP, WPA-PSK, WPA2-PSK (product does not support Enterprise Wi-Fi) Compatibility Apple HomeKit, Google Assistant, Amazon Alexa, Samsung SmartThings Supported systems iOS 13 and later, Android 6.0 and later Operating temperature 0°C to 40°C Storage temperature From -40°C to 70°C Operating ambient humidity 10-90% (non-condensing) Storage ambient humidity 5-90% (without condensation)

EcoFlow RAPID magnetic powerbank, 5000mAh (black).The EcoFlow RAPID magnetic powerbank offers a capacity of 5000mAh. With its help you will charge your equipment both wired (30W) and wireless (15W). At your disposal will be a USB-C port and an integrated USB-C cable. The device supports popular charging protocols, such as PD, QC and PPS, allowing you to renew energy quickly and safely.Fast wired chargingThe EcoFlow RAPID features a USB-C port and an integrated USB-C cable, allowing for 30W of fast charging. The charging time is impressively short - 12 minutes is enough for the battery level to reach 30%, 29 minutes ensures 70%, and a full charge takes only 55 minutes. Support for charging protocols such as PD, QC, PPS, FCP, SCP and UFCS ensures great compatibility with a variety of devices.Wireless convenienceThere is also wireless charging capability with 15W of power. The EcoFlow RAPID powerbank supports Qi1.0 (5W) technology and the newer Qi2.0 (15W) version, suitable for iPhone models from the 13 series upwards. This makes charging Apple devices even more efficient - in just 44 minutes the charge level of the iPhone 15 reaches 50%.Always at handThe dimensions of the EcoFlow RAPID powerbank are 108 x 70 x 13.9 mm, and it weighs less than 165 g. So you can conveniently stow it in your bag or pocket without worrying about extra weight. The capacity of 5,000 mAh provides reliable support even when traveling. Manufacturer EcoFlow Model RAPID Color black Battery type lithium-cobalt Battery capacity 5000 mAh Ports C1: built-in USB-C cable (input/output) / C2: USB-C port (input/output). Input power for wired charging 30W Charging time 12 min - 30% / 29 min - 70% / 55 min - 100% Wired charging output power 30W Supported protocols for wired charging PD, QC, PPS, FCP, SCP, UFCS Wireless charging output power 15W Supported wireless charging protocols Qi1.0 (5W, Android) / Qi2.0 (15W, iPhone 13 and above) Wireless charging time 44 min to charge an iPhone 15 to 50% EMC Class B Dimensions 108 x 70 x 13.9 mm Weight 165 g

EcoFlow RAPID magnetic powerbank, 5000mAh (blue).The EcoFlow RAPID magnetic powerbank offers a capacity of 5000mAh. With its help you will charge your equipment both wired (30W) and wireless (15W). At your disposal will be a USB-C port and an integrated USB-C cable. The device supports popular charging protocols, such as PD, QC and PPS, allowing you to renew energy quickly and safely.Fast wired chargingThe EcoFlow RAPID features a USB-C port and an integrated USB-C cable, allowing for 30W of fast charging. The charging time is impressively short - 12 minutes is enough for the battery level to reach 30%, 29 minutes ensures 70%, and a full charge takes only 55 minutes. Support for charging protocols such as PD, QC, PPS, FCP, SCP and UFCS ensures great compatibility with a variety of devices.Wireless convenienceThere is also wireless charging capability with 15W of power. The EcoFlow RAPID powerbank supports Qi1.0 (5W) technology and the newer Qi2.0 (15W) version, suitable for iPhone models from the 13 series upwards. This makes charging Apple devices even more efficient - in just 44 minutes the charge level of the iPhone 15 reaches 50%.Always at handThe dimensions of the EcoFlow RAPID powerbank are 108 x 70 x 13.9 mm, and it weighs less than 165 g. So you can conveniently stow it in your bag or pocket without worrying about extra weight. The capacity of 5,000 mAh provides reliable support even when traveling Manufacturer EcoFlow Model RAPID Color blue Battery type lithium-cobalt Battery capacity 5000 mAh Ports C1: built-in USB-C cable (input/output) / C2: USB-C port (input/output). Input power for wired charging 30W Charging time 12 min - 30% / 29 min - 70% / 55 min - 100% Wired charging output power 30W Supported protocols for wired charging PD, QC, PPS, FCP, SCP, UFCS Wireless charging output power 15W Supported wireless charging protocols Qi1.0 (5W, Android) / Qi2.0 (15W, iPhone 13 and above) Wireless charging time 44 min to charge an iPhone 15 to 50% EMC Class B Dimensions 108 x 70 x 13.9 mm Weight 165 g

EcoFlow RAPID magnetic powerbank, 5000mAh (silver).The EcoFlow RAPID magnetic powerbank offers a capacity of 5000mAh. With its help you will charge your equipment both wired (30W) and wireless (15W). At your disposal will be a USB-C port and an integrated USB-C cable. The device supports popular charging protocols such as PD, QC and PPS, allowing you to charge quickly and safely.Fast wired chargingThe EcoFlow RAPID features a USB-C port and an integrated USB-C cable, allowing for 30W of fast charging. The charging time is impressively short - 12 minutes is enough for the battery level to reach 30%, 29 minutes ensures 70%, and a full charge takes only 55 minutes. Support for charging protocols such as PD, QC, PPS, FCP, SCP and UFCS ensures great compatibility with a variety of devices.Wireless convenienceThere is also wireless charging capability with 15W of power. The EcoFlow RAPID powerbank supports Qi1.0 (5W) technology and the newer Qi2.0 (15W) version, suitable for iPhone models from the 13 series upwards. This makes charging Apple devices even more efficient - in just 44 minutes the charge level of the iPhone 15 reaches 50%.Always at handThe dimensions of the EcoFlow RAPID powerbank are 108 x 70 x 13.9 mm, and it weighs less than 165 g. So you can conveniently stow it in your bag or pocket without worrying about extra weight. The capacity of 5,000 mAh provides reliable support even when traveling Manufacturer EcoFlow Model RAPID Color silver Battery type lithium-cobalt Battery capacity 5000 mAh Ports C1: built-in USB-C cable (input/output) / C2: USB-C port (input/output). Input power for wired charging 30W Charging time 12 min - 30% / 29 min - 70% / 55 min - 100% Wired charging output power 30W Supported protocols for wired charging PD, QC, PPS, FCP, SCP, UFCS Wireless charging output power 15W Supported wireless charging protocols Qi1.0 (5W, Android) / Qi2.0 (15W, iPhone 13 and above) Wireless charging time 44 min to charge an iPhone 15 to 50% EMC Class B Dimensions 108 x 70 x 13.9 mm Weight 165 g

ZigBee IMOU KIT-TRV1-EU-2 thermostatic head kit with 6 adapters and gatewayZigBee IMOU KIT-TRV1-EU-2 thermostatic head kit with 6 adapters and gatewayIMOU KIT-TRV1-EU-2 ZigBee thermostatic head kit is a modern solution for smart home temperature management. With advanced technology, precise control and rich features, it provides convenience, energy savings and thermal comfort. Included in the kit you will find a TRV1 thermostatic head, ZigBee gateway and 6 adapters that allow installation in different types of radiators.Universal fit with 6 adaptersThe IMOU TRV1 is compatible with many radiator models thanks to the 6 included adapters: RA, RAV, RAVL, CAL, M28 and GIA. Regardless of the type of valve in your home, you can easily install a thermostatic head, eliminating worries about mismatched components.Precise temperature controlThe IMOU TRV1 thermostatic head allows accurate temperature control with a precision of up to 0.5°C and an error of no more than ±0.3°C. Guaranteeing greater control over thermal comfort and more efficient energy management compared to traditional valves.Intelligent window opening detectionWhen you open a window, TRV1 automatically senses a rapid temperature drop of 1.5°C and closes the valve to avoid unnecessary energy consumption. This practical solution helps save heat and lower heating bills.Automatic startup based on locationWith the geolocation function, the TRV1 will automatically adjust the temperature or start when you are within a certain distance from home. You don't have to remember to manually turn on the heating - the system will do it for you.Advanced ZG2 gatewayThe ZigBee ZG2 gateway acts as a control center for your heating system. It allows you to connect up to 32 devices and provides remote control via the IMOU Life app. Thanks to the local alarm function, the system works even if there is no internet connection. The ZG2 gateway supports the ZigBee 3.0 protocol and connects to a 2.4 GHz home Wi-Fi network, offering a fast and stable connection.Convenient operation via app and voiceControlling the IMOU TRV1 head is simple and intuitive. You can manage settings remotely using the IMOU Life app or with voice commands. Popular voice assistants are supported, making temperature management even more convenient.Anti-freeze function for safetyThe TRV1 automatically starts heating if it detects a low room temperature, preventing pipes from freezing. This ensures that your heating system is protected even when you are away for a long time.Energy-efficient and long-lasting operationThe head is powered by 2 AA batteries and uses the energy-efficient ZigBee 3.0 protocol, ensuring long battery life. In addition, the IMOU Life app will notify you when the battery is low to prevent unexpected interruptions.The perfect solution for the modern homeThe IMOU KIT-TRV1-EU-2 combines modern technology, convenience and economy. With the ability to connect up to 32 devices, parental lock function and smart scheduling, managing the temperature in your home will become simpler and more efficient than ever before.Included TRV1 smart head x1 Adapter x6 AA battery x2 Quick start guide x1 Manufacturer information x1 RF radio frequency information x1 Battery safety note x1 ZG2 smart gateway x1 USB cable x1 Power supply x1 Manufacturer IMOU Model KIT-TRV1-EU-2 TRV1 smart head Power source 2 x AA battery Voltage 3V Communication mode Zigbee Wireless transmission 100m Imou app iOS, Android Set temperature range 5~35℃ Temperature setting accuracy 0.5℃ Operating temperature range 0~55℃ Operating humidity range 0 ~ 95% relative humidity (non-condensing) Shipping and storage temperature -10~60℃ Certification CE, RoHS Battery life 7 months ZG2 smart gateway Operating voltage DC 5V Operating temperature -10~55°C Operating humidity 0~95% relative humidity, non-condensing Installation method Mounting on the desk Appearance Size φ74.8x24mm Weight 60g Wireless protocol Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Zigbee3.0

Carlinkit Tbox Basic (2+16G) Carplay/Android Wireless Adapter (black).The Carlinkit Tbox Basic Wireless Adapter (2+16G) is a compact and powerful device that allows you to easily use CarPlay and Android Auto features in your car. Equipped with Android 11.0 and Qualcomm QCM2290 ARM Cortex-A53 Quad-core processor - it ensures smooth and stable operation of essential applications.Performance and memoryThe adapter offers 2 GB of RAM and 16 GB of internal memory, allowing you to store and run various applications without lag. The Adreno 702 GPU provides high-quality graphics, ideal for displaying multimedia content, and thanks to adaptive resolution, the image is always optimally adjusted to the car's screen.Easy installation and connectivityInstallation of the device is extremely easy - just plug the adapter into the car's USB port. The product also supports 2.4G + 5G Wi-Fi and Bluetooth 4.2 BLE + 5.0 BLE, which ensures a fast and stable wireless connection. So you can easily pair it with your mobile device of choice!Compatibility and Additional FeaturesThe Carlinkit Tbox Basic is compatible with a wide range of smartphones - from iPhones 6 and above (systems from iOS 10.0) to phones running Android 11.0 and up. In addition, built-in apps such as Play Store, YouTube, Netflix, Disney+ and TikTok allow you to conveniently enjoy your favorite media content right from your car screen.Ports and extensionsThe adapter is equipped with a USB-C port and a TF card slot that allows you to expand your storage up to 256GB. This allows you to store more data and enjoy greater flexibility. What's more, the device is made of durable ABS material for long-lasting durability.Included Adapter Cable x2 User manual Manufacturer Carlinkit Model Tbox Basic (2+16G) System Android 11.0 CPU Qualcomm QCM2290 ARM Crotex-A53 Quad-core 64-bit CPU, up to 2.0 GHz 11 nm GPU Adreno 702 Memory 2 GB (RAM) + 16 GB (ROM) Wi-Fi module WCN3950E Input current 5 V ± 0.2 V 1 A Power consumption 5 W Wi-Fi frequency 802.11 a/b/g/n/ac 2.4G + 5G Bluetooth version 4.2 BLE + 5.0 BLE Built-in applications Play Store, YouTube, Netflix, Disney+, TikTok Material ABS Compatible smartphones iPhone 6 and later (iOS 10.0 and later), smartphones running Android 11.0 and later Resolution Adaptive Ports LED, USB-C, TF card slot (up to 256 GB) Dimensions 78 x 78 x 16 mm Weight 0.155 kg

Functions: Camera for children Suitable for photos and videos With selfie mode and photo filters With built-in speakers Screen: 6.1 cm / 2.4 inch LCD Max. video resolution: 32 MP Max. video resolution: 1920x1080 Power supply: 600 mAh lithium battery The memory can be expanded up to 32 GB using a microSD card USB Micro-B 2.0 port Water resistant up to 10 meters Including an 8GB microSD card

SwitchBot Blind Tilt SystemThe SwitchBot Blind Tilt is an innovative blinds management system known for its easy installation without the need for tools. Intelligent light regulation based on external conditions allows for maintaining optimal lighting comfort in every room, while its compatibility with other SwitchBot products simplifies creating a smart home. Additionally, versatile control options ensure user convenience. The included solar panel ensures long-lasting operation without the need for recharging.Convenience with the AppThe dedicated mobile app provides easy and intuitive control of blind positions from your home. From the app, you can also customize settings, such as scheduling blinds to open at a specific time, like in the morning when you wake up. You can also manually manage the blinds, and Blind Tilt will automatically synchronize the settings. With Bluetooth 5.0 support, you'll always enjoy a stable connection.Additional Control OptionsWhen connected to the SwitchBot Hub Mini, you gain additional control options, including remote control from anywhere and compatibility with voice assistants. The system is compatible with Alexa, Google Assistant, Siri Shortcuts, IFTTT, and SmartThings. You can also equip yourself with the SwitchBot Remote to control blinds with a simple click. The choice is yours!Blind GroupingDon't waste valuable time individually controlling blinds in each room. With the SwitchBot Blind Tilt, you can configure up to 4 blinds into groups and control them simultaneously with a single command. It is also possible to create multiple groups. This allows you to conveniently manage your smart home! Note: SwitchBot Hub is required for groups consisting of more than 4 blinds.Well-Thought-Out DesignThe SwitchBot Blind Tilt system is equipped with a motor that allows precise adjustment of blinds with an accuracy of up to 2°, providing better control over natural light in rooms. Additionally, the noise generated during operation does not exceed 40 dB, ensuring it does not disrupt your peace and quiet. The product is also widely compatible – you can successfully use it with blinds up to 3 meters wide.Intelligent AutomationThanks to the built-in light sensor, the SwitchBot Blind Tilt allows you to maintain a constant brightness level in the room by automatically adjusting the blind angle based on external light intensity. When natural lighting isn't sufficient, you can equip yourself with the SwitchBot Color Bulb, which works in harmony with the system, ensuring a smooth maintenance of the optimal lighting environment in your home.Reliable Power SourceThe included solar panel is equipped with a 2000 mAh battery, ensuring continuous power supply to the system, eliminating the need for regular recharging. This is an environmentally friendly solution that also saves energy.Included in the Package: Main Unit Solar Panel Open Flex Connector Base A Base B Base Cover Cable Holder Adhesive Adapter (S/M/L/XL) x4 Paper Measuring Tape Mounting Card Self-Adhesive Stickers x2 Wet Wipes USB-C Power Cable Retractable Pin Spare Double-Sided Tape (for Base A) User Manual Manufacturer SwitchBot Model W2701600 Color White Material ABS+PC (UV-resistant coating) Dimensions 48.8 x 29.2 x 210 mm Weight 30 g Power Source USB-C, DC 5 V 1 A; 2000 mAh lithium battery Battery Life Approximately 10 months or nearly unlimited with solar panel Operating Temperature From -10°C to 45°C Operating Humidity From 10% to 95% RH Torque Force ≤ 1 kgf.cm Network Connectivity Bluetooth 5.0 System Requirements iOS 11.0+, Android OS 5.0+ , System do żaluzji SwitchBot Blind TiltSwitchBot Blind Tilt to innowacyjny system zarządzania żaluzjami, który charakteryzuje się łatwością instalacji bez użycia narzędzi. Inteligentna regulacja oświetlenia w zależności od warunków zewnętrznych pozwala na utrzymanie komfortu świetlnego w każdym pomieszczeniu, a współpraca z innymi produktami SwitchBot ułatwia stworzenie inteligentnego domu. Ponadto wszechstronne

Functions: Camera for children Suitable for photos and videos With selfie mode and photo filters With built-in speakers Screen: 6.1 cm / 2.4 inch LCD Max. video resolution: 32 MP Max. video resolution: 1920x1080 Power supply: 600 mAh lithium battery The memory can be expanded up to 32 GB using a microSD card USB Micro-B 2.0 port Water resistant up to 10 meters Including an 8GB microSD card

Ottocast wireless car adapter for mirroringOttocast Mirror Touch is an innovative car adapter that offers two-way control when mirroring. It transfers your smartphone's screen directly to the car display, and you can operate apps by touch, just as conveniently as on your phone. It's a solution that makes daily commuting or traveling more comfortable and safer.Two-way control without restrictionsUnlike standard solutions, Ottocast Mirror Touch provides full compatibility with all applications - without locks or restrictions. Use maps, instant messaging or your favorite tools - exactly as you would on a smartphone screen. You also don't have to worry about your privacy - your messages or login data will remain exclusively on your phone. What's more, the low-latency technology of 80 ms makes using apps on the car screen completely natural. Scrolling, text entry or multimedia controls are all done in real time - without stuttering or lag.Integrated audio and safe drivingAll sounds from your phone are transferred to the car's factory audio system, so you can enjoy music, podcasts or phone calls in top quality. What's more, transferring the controls to the car's big screen noticeably increases comfort and safety while driving.CarPlay and Android Mirroring in oneThe device allows you to use wireless Apple CarPlay and full Android mirroring. The adapter automatically switches between modes, providing simple operation and seamless connectivity every time you start your vehicle.Compact design, fast charging, wide compatibilityThe Ottocast Mirror Touch is a slim device with a durable damage-resistant cable. It supports fast charging with up to 27 watts of power, so your smartphone will always be ready to go, even on long trips.The adapter works with most car models on the market - from sedans and SUVs (Sport Utility Vehicle) to luxury limousines and campers.Included Ottocast Mirror Touch adapter USB-A (Universal Serial Bus type A, a standard connector for data and power transfer) to USB-C (Universal Serial Bus type C, a symmetrical connector for high-speed data and power transfer) adapter User manual Manufacturer Ottocast Model CA450 Processor Single-core ARM Cortex A7 900 MHz Bluetooth (short-range wireless communication technology) 5.2 BLE (Bluetooth Low Energy, an energy-efficient version of Bluetooth) Bluetooth name CAR-XXXX Wi-Fi (Wireless Fidelity, a wireless data transmission technology) 802.11 a/b/g/n 2.4 GHz + 5 GHz Operating temperature From -20°C to 70°C Power supply 5V = 2A Dimensions 94.5 × 31.2 × 15 mm Available ports USB-C

Niimbot K2 portable label printer (white)The Niimbot K2 label printer is an advanced yet compact device that allows you to print labels and wristbands quickly and conveniently - both at home and in professional environments. Thanks to its modern design and intuitive operation, it will be ideal foramong others. in catering, medical care, retail, jewelry industry or home space organization, among others.Wide range of applications and formatsThe device supports labels from 20 to 60 mm wide, so you can easily adapt it to your needs - from hospital wristbands and warehouse markings to clothing tags and food labels. The Niimbot K2 provides the flexibility and multifunctionality you need every day.Impressive paper capacityThe K2 features a spacious chamber tray for rolls up to 110 mm in diameter, making it 4 times more efficient than typical portable printers. One load can accommodate up to 1,300 labels, allowing for long operation without frequent replenishment of consumables.Easy operation and modern appWith mobile and PC app support, the printer offers more than 8,700 ready-to-use templates, a label editor with QR and barcode support, dynamic date and time, and three methods for quick data entry: text, image, scan. All this in a clear and intuitive interface, also supported in real time.Compact design and mobilityThe sleek, minimalist casing in white color blends well with any interior and workstation. With its compact size and built-in USB Type B charging function, the Niimbot K2 is an ideal choice for those who value mobility and convenience - both in the office and in the field.Included Niimbot K2 label printer (white) USB type B cable power adapter user's manual Manufacturer Niimbot Model K2 Color white Width of labels from 20 mm to 60 mm Roll diameter up to 110 mm Roll capacity up to 1300 labels Connectivity USB-B

EcoFlow RAPID magnetic powerbank, 10000mAh (silver).The EcoFlow RAPID is a 10,000mAh magnetic powerbank that provides fast and safe charging for mobile devices. With a wired charging power of up to 65W and a wireless charging capability of 15W, it guarantees reliable power for modern smartphones, tablets or laptops. An integrated USB-C cable and USB-C port will be at your disposal. Compatibility with popular protocols, including PD, QC, PPS, FCP, SCP and UFCS, ensures wide compatibility.Wired charging with 65W of powerThe EcoFlow RAPID Powerbank offers a wired charging power of 65W, allowing you to charge your devices efficiently. With an integrated USB-C cable and USB-C port, you can enjoy maximum performance and save time. It only takes 11 minutes for the charge level to reach 30%, 27 minutes for 70%, and a full charge takes only 52 minutes. Support for the most popular charging protocols, such as PD, QC, PPS, FCP, SCP and UFCS, guarantees compatibility with a variety of devices and ensures stable and safe energy renewal.Wireless freedomThe EcoFlow product also supports wireless charging at 15W, enabling fast charging without the need for cables. With compatibility with the Qi1.0 (5W) and Qi2.0 (15W) standards, the powerbank is tailored to wirelessly renew the energy of Android devices and iPhones from model 13 and up. To charge an iPhone 15 to 50%, 44 minutes is enough.Lightweight, compact designDespite its large capacity, the EcoFlow RAPID powerbank maintains compact dimensions (108 x 70 x 22.9 mm) and weighs only 258 g, so you can conveniently place it even in your pocket. Opt for a portable power source that is perfect for both travel and everyday use without adding unnecessary weight to your bag! Manufacturer EcoFlow Model RAPID Color silver Battery type lithium-cobalt Battery capacity 10,000 mAh Ports C1: built-in USB-C cable (input/output) / C2: USB-C port (input/output). Input power for wired charging 65W Charging time 11 min - 30% / 27 min - 70% / 52 min - 100% Output power of wired charging 65W Supported protocols for wired charging PD, QC, PPS, FCP, SCP, UFCS Wireless charging output power 15W Supported wireless charging protocols Qi1.0 (5W, Android) / Qi2.0 (15W, iPhone 13 and above) Wireless charging time 44 min to charge an iPhone 15 to 50% Bluetooth yes Digital display yes Built-in beeper yes Application compatibility yes EMC class B Dimensions 108 x 70 x 22.9 mm Weight 258 g

Ottocast Play2Video Ultra Carplay/Android Auto Wireless AdapterThe Ottocast Play2Video Ultra is a versatile adapter that combines CarPlay and Android Auto features with the multimedia capabilities of a smart TV. It allows you to wirelessly use your phone in the car, as well as play video from popular platforms such as Netflix, YouTube, Prime Video and IPTV. With a fast quad-core processor, Bluetooth technology, dual-band Wi-Fi and Android 12, it provides smooth operation, a stable connection and intuitive operation. It's the perfect solution for drivers who want convenience and entertainment at the highest level!Wireless use of CarPlay and Android AutoThe device enables wireless use of Apple CarPlay and Android Auto, eliminating the need for cables. It works with iPhones from iOS 10.0 and above, as well as smartphones with Android 11.0 and above, guaranteeing the full functionality of multimedia systems. So you can conveniently use navigation, make calls, listen to music and operate apps by voice - without touching your phone and without taking your attention off the road.Full integration with your car's control systemsOttocast Play2Video Ultra is designed to work with your vehicle's factory controls. The device supports commands from the steering wheel, and dials, and is also compatible with voice assistants such as Siri. So you can manage music, calls and apps safely, conveniently and intuitively - without having to reach for your phone.Performance and smooth operation with a quad-core processorThe adapter features the H618 processor with four cores for lightning-fast response and smooth operation. Combined with 4+32 GB of memory, it offers fast startup, efficient application handling and smooth playback of multimedia content. The device runs on Android 12, which allows for stable and responsive operation.Entertainment at your fingertips - built-in streaming applicationsOttocast Play2Video Ultra is more than an adapter - it's a full-fledged entertainment center in your car. The device has built-in Netflix, YouTube, Prime Video and IPTV apps, so you can enjoy your favorite movies, series and shows without having to plug in your phone. It's perfect for rest stops, long trips or family outings!Simple installation and quick setupInstallation of the adapter is extremely simple and requires no technical knowledge. Simply plug the device into a USB port and connect to a Wi-Fi network or hotspot to enjoy access to all features. It's a convenient plug-and-play solution that saves time and eliminates unnecessary setup.Dual connectivity and maximum stabilityThe adapter uses Bluetooth technology and dual-band Wi-Fi to provide a fast, stable connection to your phone and media system. As a result, both audio and video transmission is smooth, without interference or delays. This is a guarantee of reliable performance in all conditions.Offline playback and entertainment without rangeThanks to its large memory capacity (4+32 GB), the adapter allows you to save content and play it offline. This is ideal for traveling to places out of network coverage - you can listen to music or watch movies without interruption or buffering, regardless of your location.Compact, elegant and durable designThe adapter is distinguished by its refined design and solid workmanship. The IML-finished housing guarantees durability, scratch resistance and a modern look that blends seamlessly with the interior of any car. Thanks to its well-thought-out design and compact dimensions, the device fits perfectly into the cockpit space, while the flexible USB cable facilitates installation and prevents excessive strain on the connector, ensuring a long life of the equipment. Manufacturer Ottocast Name Ottocast Play2Video Ultra (CP515-M/M2) Model CA515-T Processor H618 RAM+ROM 4 GB + 32 GB / 2 GB + 16 GB Operating system Android 12 Bluetooth 4.2 Wi-Fi Dual-band 802.11 a/b/g/n/ac Connector USB-A Dimensions 80.3 × 40 × 15 mm Weight 39,5 g Compatible operating systems iOS 10.0

Easypix My Studio Podcast 62021 set with microphone and headphones Microphone features: Condenser microphone Cardioid High sensitivity Noise reduction Take control Frequency range 20Hz-20kHz Sensitivity 25 mV/Pa (-36 dB ± 2 dB) Sampling frequency 192 kHz / 24 bits Input volume 104 dB Dynamic range 117 dB (1 khz.

UNI FAN SL Wireless The UNI FAN SL Wireless series has made another revolutionary breakthrough in making cable management easier and unifying controllers across different devices. The UNI FAN SL Wireless utilizes a 2.4 GHz wireless signal to control its lighting effects and fan speed to further improve your PC building experience. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only. WIRELESS CONTROL, EASY INSTALLATION The revolutionary 2.4GHz L-wireless controller greatly simplifies the installation experience of UNI FAN SL Wireless Series. L-WIRELESS CONTROLLER Included in these models:12SLLCD1W3B, 12SLLCD1W3W, 12RSLLCD1W3B, 12RSLLCD1W3W, 12SL1W3B, 12SL1W3W, 12RSL1W3B, 12RSL1W3W, PW24-1W-T, RF-T-B, RF-T-W Based on user experience and continuous research, we newly designed a L-Wireless controller. The L-Wireless controller connects to the motherboard, and transmits a 2.4GHz signal to the fan, enabling the wireless control of the LED lighting effects and fan speed for the UNI FAN SL Wireless Series. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only. Connect to USB Type A port   Connect to 9-pin port on motherboard Note: To synchronize the fan speed with the motherboard, please use the second connection method and ensure that the PWM cable from the controller is connected to the motherboard for proper functionality. Switch to PWM fan and full speed mode in the Bios. Power each group of fans by connecting the PWM cable on the receiver to the motherboard (the LCD version also requires a separate USB connection for signal transmission). The cable length can be shorten by winding it around the organizer on the receiver. Note: The LED and LCD version use a different receiver, for the mix cluster, please use the LCD version receiver. Note: If the motherboard 4-pin PWM ports' power is insufficient (below 1A) and the fan shows a flickering white light upon startup, this indicates unstable power from the motherboard. In this case, please connect the cable to a different 4-pin PWM port on the motherboard or use the included 12V to SATA adapter from the triple-pack. Adopting a wireless solution minimizes the number of cables, and simplifies cable management while avoiding occupying the few available USB 2.0 ports on the motherboard. This allows users to connect more devices without restriction. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only.   The transmission logic between the USB port and the LCD has been optimized, enabling the use of an additional USB splitter cable to the USB 2.0 or 3.0 port on the motherboard: - USB splitter cable without SATA for additional power (e.g., LIAN LI USB 2.0 1-to-3 HUB): Supports up to 6 SL LCD wireless fans.- USB splitter cable with SATA for additional power (e.g., LIAN LI Edge PSU hub): Supports up to 9 SL LCD wireless fans. Furthermore, a single motherboard can support up to 20 UNI FAN SL LCD wireless fans. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only. SIMULTANEOUS CONTROL This powerful controller supports the transmission of 10 channels simultaneously. Note: The controller supports the Strimer Wireless Series as well. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only.   Each group of fans occupies one channel, ensuring stable control for multiple groups of fans, all within the installation limits of your standard PC. Plus, it's fully compatible with the latest Strimer Wireless, allowing you to use the extra channels for other devices. In the future, the L-Wireless Controller will also be compatible with all LIAN LI wireless devices. With this controller, you can create a stunning and streamlined LIAN LI ecosystem that combines beauty and simplicity! Note: This listing is for the LED model, not the LCD Model. Images shown below are for

PXN-H BS Handbrake Precise control and a realistic driving experience at your fingertips. The PXN-H BS handbrake is equipped with a high-precision 16-bit sensor that ensures accurate and smooth reproduction of every movement. The sturdy aluminum construction and compact dimensions (approx. 313 × 178 × 46 mm) make the device durable yet easy to install. Furthermore, USB power delivery ensures stable, lag-free performance, and the plug-and-play system speeds up the connection process. Aluminum Construction and Durability The mouse features a reinforced construction, allowing it to withstand heavy use and long gaming sessions. The use of an aluminum alloy ensures high resistance to pressure and wear. Additionally, this material offers low susceptibility to corrosion, contributing to the device’s long lifespan and helping it maintain its aesthetic appearance over time. Precision sensor The built-in 16-bit magnetic encoder ensures accurate and stable signal transmission. The contactless design enhances smooth operation and reduces mechanical wear, resulting in greater durability and repeatability of every movement. This gives you full control over braking in dynamic track situations! Adjustability The replaceable spring and damping system allows you to adjust the resistance and response speed. This solution makes the device better mimic natural hand movement and increases comfort of use. Thanks to this, you can easily adjust the brake’s performance to your own preferences! Two operating modes – vertical and horizontal The PXN-HB S offers the option to operate in vertical or horizontal mode. The vertical setting provides an experience similar to that of rally cars, while the horizontal setting resembles classic solutions used in road cars. Adjust the configuration to your favorite driving style and game type! Simple installation and wide compatibility The brake uses a USB interface and operates in plug-and-play mode, meaning quick connection without the need to install drivers. It is compatible with Windows 7, 8, 10, and 11, and works seamlessly with popular games such as Assetto Corsa, Need for Speed, Euro Truck Simulator 2, and Forza Horizon 5. Additionally, the dedicated PXN software allows you to configure functions and assign buttons according to your needs. Included Handbrake x1 Mounting bracket x1 Spring x1 Silencer x1 USB-B cable x1 Flathead screwdriver x2 M3 Allen key x1 M5 Allen screws x4 M5 Allen wrench x1

EcoFlow RAPID Power Bank 25000 mAh, 170WThe EcoFlow RAPID Powerbank features a 25,000 mAh capacity, which, combined with its compact design, makes it great for work, travel and everyday use. It supports fast charging with up to 140 watts on a single port and 170 watts combined when using multiple outlets simultaneously. Whether you're charging a laptop, phone or tablet, the RAPID delivers full performance without compromise.Fast charging for up to three devicesWith two USB-C (Universal Serial Bus Type-C, a universal connector for data and power), one USB-A (Universal Serial Bus Type-A, a standard connector for data and charging) ports and a combined power of up to 170 watts, you can charge several devices simultaneously without losing speed. The maximum power of 140 watts on a single USB-C port is even enough to power modern laptops and camera equipment. It's ideal for people who value their time and don't want to wait for a free outlet!Capacity that gives you freedomThe 25,000 mAh battery allows you to charge your smartphone, tablet or camera multiple times. That's enough energy to power a laptop on the road, for example. Importantly, the device meets airline safety standards, so you can easily take it on a plane with you.Smart TFT displayThe built-in TFT (Thin-Film Transistor) screen offers access to the most important information related to the operation of the powerbank. With its help you can quickly check, for example, the charge level, temperature or current power on each port. The display provides a clear, readable image from any angle and in any lighting conditions - even in bright sunlight!Advanced protectionThe powerbank is equipped with an advanced power management system, used in electric vehicles, among others. The device constantly monitors the charging process, protecting the battery from overheating, overcharging, over-discharging and short-circuiting. This allows you to use it in almost any conditions - without worrying about safety. General Manufacturer EcoFlow Model EFRAPID25K140WB-EU Total cell capacity 25000 mAh Battery capacity 14500 mAh (5 V / 3 A) Dimensions 157 x 53.8 x 48.8 mm Weight Approximately 565 g Color Black Battery Cell chemistry Three-component lithium Lifetime Approximately 300 charge cycles (up to 80% capacity) Battery type Changhong Sanjie, INR21700-5000, 5*5000mAh Number of cells 5 5000mAh 21700 batteries connected in series Outputs Available output ports USB-C1 140 watts, USB-C2 140 watts, USB-A 33 watts, max total output power 170 watts. USB-A output 33 W USB-C output 140 W Inputs Input power 140 W Charging via USB-C Charging via multiple ports is not supported. The maximum input power per port (USB-C1 / USB-C2)is 140 watts. Other Management by application No Screen TFT Drop resistance Up to 1m Fire resistance V0 class housing Certification EMC Class B Temperature Optimum operating temperature From 20°C to 30°C Charging temperature From 0°C to 45°C Discharge temperature From -10°C to 45°C

GlocalMe Roamplug adapter with 4G/LTE Wi-Fi hotspotGlocalMe Roamplug with 4G Wi-Fi hotspot is an innovative solution that combines the functionality of a portable router with a universal travel adapter. With support for global 4G LTE and Wi-Fi 6 bands, it provides stable internet access almost anywhere in the world. And CloudSIM technology, provides internet access without the need for local SIM cards. Just plug it in and it will automatically connect to the best available network in more than 150 countries. The device also supports various fast charging standards, with a total maximum power output of up to 70 watts. So you can charge your phone or wireless headphones in no time!Internet at your fingertips - CloudSIM technologyWith built-in eSIM and CloudSIM technology, Roamplug eliminates the need for physical SIM cards. The device automatically detects and connects to the best network in your country, allowing you to use the Internet in more than 150 locations around the world. Meanwhile, it supports numerous FDD-LTE and TDD-LTE bands, providing broad compatibility with networks, while supporting standards such as WCDMA and GSM.Wi-Fi 6 advantageThe device operates in the 2.4 GHz band and supports Wi-Fi 6 (802.11 b/g/n/ax), allowing for better connection speed and performance compared to older standards. In addition, you can simultaneously connect up to 10 devices, making it ideal for travel, family outings, as well as work in the field. Guaranteeing smooth network performance, even under heavy load.Universal travel adapterRoamplug is not just a hotspot - it's also a reliable adapter compatible with international electrical outlet standards (EU, UK, JP, CN, US, AUS). Thanks to its clever design with retractable plugs, you can easily adjust it to your current needs! Forget about the need for additional adapters. The device supports input voltage from 110 V to 250 V, allowing you to use it in many countries around the world without worry. It also stands out with a weight of only about 240 g and dimensions of 50 x 90.3 x 53.3 mm - so it's very convenient to carry.High power and support for fast chargingThe Roamplug adapter provides a maximum output power of 70 watts, and with four available ports (3x USB-C, 1x USB-A), it allows you to power several devices simultaneously. It also supports multiple fast charging standards, such as PD3.0, QC4.0, FCP, AFC and PPS. So you can get your tablet, phone or laptop ready to go in no time!Reliability on any tripGlocalMe Roamplug stands out for its innovative approach to mobile internet and the versatility of a travel adapter. It's the perfect solution for people who value convenience, speed and independence - without worrying about local SIM cards or lack of network access. Compact size, modern technology and wide compatibility make this device an indispensable companion for any trip. Manufacturer GlocalMe Model Roamplug white Dimensions 50 × 90.3 × 53.3 mm Housing material Plastic Color White Weight Approximately 240 g LED color WiFi: blue; Power: blue; CPU UNISOC8310 FDD-LTE B1/2/3/4/5/7/8/12/13/17/18/20/25/26/28/66 TDD-LTE B34/38/39/40/41(194M) WCDMA B1/2/4/5/8 GSM 850/900/1800/1900 WLAN 2.4 GHz 802.11 b/g/n/ax 1T1R Max. number of Wi-Fi accesses 10 Bluetooth No GPS No Power button No WPS button No Reset button Yes Max power 70 W Fuse 2 × 10 A AC input EU/UK/JP/CN/US/AUS, input/output 110 V ~ 250 V DC output USB-C1+C2 max: 15 W + 45 W = 60 W; USB-C1/C2 + C3 max: 45 W + 10 W = 55 W; USB-C1 + C2 + C3 max: 15 W + 45 W + 10 W = 70 W; USB-C1 + C2 + C3 + A1 max: 15 W (C1 + A1) + 45 W + 10 W = 70 W; Single output USB-C1 max: 45W; USB-C2 max: 65W; USB-C3 max: 10 W; USB-A max: 18 W; Supported fast charging standards 1. USB-C1/C2: PD3.0, PD 2.0, QC4.0, QC3.0, QC2.0, FCP, AFC, Apple, PPS, BC1.2; 2. USB-A: QC3.0, QC2.0, FCP, AFC, BC1.2, Apple; 3. USB-C3: BC1.2; External SIM card No Operating system RTOS

Carlinkit CPC200-Tbox S Carplay&Android Auto wireless adapterThe Carlinkit CPC200-Tbox S is a wireless adapter that will change your driving experience. It allows you to wirelessly use CarPlay or Android Auto without having to connect your phone with a cable. The device runs on Android 13.0 and is equipped with a powerful Qualcomm SM6115 processor for smooth operation. With its compact design and easy installation, it is ideal for drivers who appreciate convenience and versatility while traveling.Performance and smooth operationThe adapter features a quad-core Qualcomm SM6115 processor, which combines Kryo Gold and Kryo Silver cores clocked at up to 2.0 GHz. This, along with 4GB or 8GB of RAM and Adreno 610 graphics, makes the device run extremely smoothly, even when using more demanding applications. In addition, the device offers 64 GB or 128 GB of internal memory, which can be expanded by an additional 512 GB thanks to a TF card slot. The ability to download apps directly from the store allows you to customize the device for everything from navigation to entertainment.CompatibilityThe Carlinkit CPC200-Tbox S provides seamless operation for both iOS and Android users. The device is compatible with wireless CarPlay, which supports iPhones from model 6 and up, and Android Auto, which works with devices from Android 11 and above. This means you no longer need to connect your phone with a wire to your car - just make sure your vehicle supports the factory's wired CarPlay or Android Auto, and the adapter will allow for a quick wireless connection. The adapter offers auto-switching between systems to ensure smooth and seamless operation.Multimedia featuresThe Carlinkit CPC200-Tbox S adapter is not only a convenient integration of the phone with the car system, but also a powerful multimedia platform. It allows you to play movies, listen to music and access a variety of applications directly on the car screen. You can enjoy popular streaming services such as Netflix, YouTube, Spotify and HBO Max, as well as social media applications such as Facebook and TikTok. What's more, the device supports a wide range of Bluetooth wireless accessories, up to tire pressure monitoring and OBD systems. This allows you to further expand the functionality of your vehicle, customizing it to your needs and preferences.Connectivity and navigationThe device supports dual-band Wi-Fi (2.4 GHz and 5.8 GHz), as well as Bluetooth 4.2 and 5.0, allowing a stable connection to your phone and other devices. In addition, WiFi hotspot support allows you to access the Internet on the go. The adapter has a SIM card slot, so you can use the 4G network directly from your device. In addition, the built-in navigation system with support for GPS, Glonass and Beidou provides precise positioning so you can easily reach your destination.Modern solutions and convenienceThe Carlinkit CPC200-Tbox S has a USB-C port and a SIM and TF card slot, allowing you to expand your memory and use online features. Thanks to its adaptive resolution, the device maintains image quality in line with the car's original settings for a clear and easy-to-read display. In addition, the adapter is very easy to use - just plug it into the car's USB socket to start using its functions right away. With this adapter, you can enjoy the full functionality of your smartphone on your car's screen, without the need for cables.Included wireless adapter USB-A to USB-C cable USB-C to USB-C cable user manual Manufacturer Carlinkit Model CPC200-Tbox S System Android 13.0 CPU Qualcomm® SM6115 Quad-core ARM CortexTMA73, Kryo Gold @2.0GHz+ Quad-core ARM CortexTM- A53, Kryo Silver @1.8GHz) 11nm N6 processor GPU AdrenoTM 610 Memory 4GB LPDDR4 RAM+64GB eMMC, 8GB LPDDR4 RAM+128GB eMMC Input voltage 5V±0.2V 2.0A Power 5 W Wi-Fi frequency 802.11 a/b/g/n/ac, 2.4GHz+5.8GHz Bluetooth version 4.2 BLE/5.0 LE Material ABS, PC Compatibility Wireless CarPlay: iPhone 6 and later / iOS 10.0 and later; wireless Android Auto: phone