PetSafe Mikroshēmas kaķu durtiņas

PetSafe Microchip Cat Flap is a cat door that provides your pet with freedom and independence. The flap can be installed in doors, walls, or windows, allowing your pet to come and go at any time. You don't have to interrupt your activities to let your pet out and then wait for their return to let them back in. Additionally, this model features an access lock for unwanted animals. The flap can operate in automatic or manual mode. In automatic mode, it allows entry into the house only for cats that have a microchip registered in the flap's memory. When a cat approaches the entrance, the built-in microchip reader scans the number from the microchip located in your pet's body or on their collar (available separately). If it successfully identifies the number, it releases the access lock. Other animals outside the house cannot move the flap or pass through the opening. You can register up to 40 cats in the system. The flap is compatible with the most common type of chips implanted by veterinarians, namely the 15-digit FDX-B microchip. The manual mode has 4 opening/closing options that you can easily change using a dial: the flap is completely closed (lock symbol on the dial), the cat can enter the house but cannot exit (arrow symbol pointing inward), the cat can exit but cannot enter (arrow symbol pointing outward), the flap opens both ways (bidirectional arrow). At the bottom of the flap and the opening in the frame, there are magnets that keep the flap in place, preventing excess air from entering the house and accidental opening of the flap, for example, during strong winds. Additionally, the edges of the flap are surrounded by a soft strip that increases protection against drafts and muffles the flap's operation. The transparent material resembles a window and makes it easier for the pet to push the flap in the right spot. The Microchip Cat Flap is powered by AA batteries. It can be installed in brick walls as well as wooden, metal, PVC, and UPVC doors, as well as in glass doors and windows. Installation is straightforward, and a special template and screws are included in the set. If you plan to install the flap on a thicker wall or door, this model is ideal as it has a built-in tunnel with a length of 7cm. Both the frame and the flap are made of durable plastic, making the product long-lasting and resistant to weather conditions. The flap is available in universal colors - white and brown - which fit many interiors. Key features of the PetSafe Microchip Cat Flap: - For cats, to be installed in doors, walls, and windows - Access lock for unwanted animals - Automatic and manual modes - In automatic mode, opening requires a microchip - Chip can be implanted or attached to a collar (pendant available separately) - In manual mode, 4 settings: entry and exit, entry only, exit only, or completely closed - Soft soundproofing strip around the edges of the flap - Reduced air intake from outside - Powered by AA batteries - Can be installed in glass, brick, wood, metal, PVC, and UPVC - Easy installation, template and screws included - Built-in tunnel - Available colors: white, brown Dimensions: - Internal opening (width x height): 15.2cm x 13cm - Frame (width x height): 22cm x 23.8cm - Frame thickness (internal / external): 4cm / 1.5cm - Cat weight: up to 8kg - Maximum width of the cat's shoulders: 15cm Tip: Program your cat's microchip before installing the flap to ensure the reader detects the chip and to avoid having to hold the cat at the flap. After successfully reading the cat's identifier, you should hear the flap unlock. To help your pet pass through the flap, install it so that the pet does not have to climb to get through. How to teach your pet to use the flap? After installing the flap, leave it open for a while (you can secure it with a piece of string and tape to the surface above. Ensure that the flap does not fall accidentally, as this may scare your pet). Encourage your pet to pass through the opening using their favorit

PetSafe Microchip Cat Flap is a cat door that provides your pet with freedom and independence. The flap can be installed in doors, walls, or windows, allowing your pet to come and go at any time. You don't have to interrupt your activities to let your pet out and then wait for their return to let them back in. Additionally, this model features an access lock for unwanted animals. The flap can operate in automatic or manual mode. In automatic mode, it allows entry into the house only for cats that have a microchip registered in the flap's memory. When a cat approaches the entrance, the built-in microchip reader scans the number from the microchip located in your pet's body or on their collar (available separately). If it successfully identifies the number, it releases the access lock. Other animals outside the house cannot move the flap or pass through the opening. You can register up to 40 cats in the system. The flap is compatible with the most common type of chips implanted by veterinarians, namely the 15-digit FDX-B microchip. The manual mode has 4 opening/closing options that you can easily change using a dial: the flap is completely closed (lock symbol on the dial), the cat can enter the house but cannot exit (arrow symbol pointing inward), the cat can exit but cannot enter (arrow symbol pointing outward), the flap opens both ways (bidirectional arrow). At the bottom of the flap and the opening in the frame, there are magnets that keep the flap in place, preventing excess air from entering the house and accidental opening of the flap, for example, during strong winds. Additionally, the edges of the flap are surrounded by a soft strip that increases protection against drafts and muffles the flap's operation. The transparent material resembles a window and makes it easier for the pet to push the flap in the right spot. The Microchip Cat Flap is powered by AA batteries. It can be installed in brick walls as well as wooden, metal, PVC, and UPVC doors, as well as in glass doors and windows. Installation is straightforward, and a special template and screws are included in the set. If you plan to install the flap on a thicker wall or door, this model is ideal as it has a built-in tunnel with a length of 7cm. Both the frame and the flap are made of durable plastic, making the product long-lasting and resistant to weather conditions. The flap is available in universal colors - white and brown - which fit many interiors. Key features of the PetSafe Microchip Cat Flap: - For cats, to be installed in doors, walls, and windows - Access lock for unwanted animals - Automatic and manual modes - In automatic mode, opening requires a microchip - Chip can be implanted or attached to a collar (pendant available separately) - In manual mode, 4 settings: entry and exit, entry only, exit only, or completely closed - Soft soundproofing strip around the edges of the flap - Reduced air intake from outside - Powered by AA batteries - Can be installed in glass, brick, wood, metal, PVC, and UPVC - Easy installation, template and screws included - Built-in tunnel - Available colors: white, brown Dimensions: - Internal opening (width x height): 15.2cm x 13cm - Frame (width x height): 22cm x 23.8cm - Frame thickness (internal / external): 4cm / 1.5cm - Cat weight: up to 8kg - Maximum width of the cat's shoulders: 15cm Tip: Program your cat's microchip before installing the flap to ensure the reader detects the chip and to avoid having to hold the cat at the flap. After successfully reading the cat's identifier, you should hear the flap unlock. To help your pet pass through the flap, install it so that the pet does not have to climb to get through. How to teach your pet to use the flap? After installing the flap, leave it open for a while (you can secure it with a piece of string and tape to the surface above. Ensure that the flap does not fall accidentally, as this may scare your pet). Encourage your pet to pass through the opening using their favorit