ABS pc filaments

SUNLU PC-ABS Filament (White)SUNLU PC-ABS is an advanced engineering filament that combines the best features of polycarbonate (PC) and ABS, offering exceptional strength, impact resistance, and high thermal stability. With a heat deflection temperature of up to 102°C and high mechanical strength (tensile strength 40 MPa, flexural strength 70 MPa), the material is ideal for demanding technical applications. It features low shrinkage, excellent layer adhesion, and a smooth print surface, ideal for further processing. The filament, with a diameter of 1.75 mm ±0.03 mm, a length of approx. 375 m, and zero bubble content, ensures a stable printing process and high-quality final parts.Strength and temperature resistance you can rely onThe combination of PC and ABS results in a material that easily handles harsh conditions—both mechanical and thermal. SUNLU PC-ABS remains stable even at high temperatures, making it an ideal choice for automotive, electronic, and industrial applications. You can confidently use it to manufacture automotive interior parts, device enclosures, or load-bearing components—even in heated environments where other materials fail.Professional finish and wide range of applicationsOne of the greatest advantages of SUNLU PC-ABS is its smooth surface, which is ideal for further processing—painting, coating, or metallization. This allows you to create not only durable but also aesthetically pleasing final parts and prototypes. A wide range of printing parameters (260–280°C, speed up to 230 mm/s, bed temperature 50–70°C with adhesive) and good material flow ensure a reliable printing process. This filament is for those who expect professional results and full control over the quality of their prints. Manufacturer Sunlu Material PC-ABS (polycarbonate and ABS alloy) Color White Filament diameter 1.75 mm (±0.03 mm) Weight 1 kg Filament length approx. 375 m Printing temperature 260–280°C Print speed up to 230 mm/s Curing temperature 70–80°C Density 1.081 g/cm³ Heat deflection temperature 102°C Tensile strength 40 MPa Flexural strength 70 MPa Flexural modulus 2300 MPa Elongation at break 8% Impact strength (X-Y) 70 kJ/m²

SUNLU PC-ABS ir uzlabots inženierijas filaments ar izcilu izturību un augstu siltuma stabilitāti, ideāli piemērots tehniskām lietojumprogrammām.

Sunlu S2 Filament DryerThe SUNLU Filadryer S2 is a state-of-the-art filament dryer that effectively removes moisture and restores the materials’ optimal properties, resulting in significantly better 3D print quality. Thanks to an advanced 360° heating system, a large touchscreen, and the ability to dry and print simultaneously, the device ensures maximum convenience and efficiency. It supports a wide range of materials—from PLA and PETG to more demanding filaments like PA or PC—and its intuitive operation and quiet operation make it ideal for both home workshops and professional environments.Dry filament, perfect print – no more problems, once and for allMoisture is the enemy of every 3D print. The SUNLU S2 effectively removes it from filaments, eliminating issues such as stringing, nozzle clogging, poor adhesion, and layer shifting. The result? Smooth surfaces, strong layer bonds, and greater model precision. You save material, time, and stress—every print has a better chance of succeeding on the first try.Intuitive tablet-style operation—everything under control with a single touchA large, color touchscreen (4.6") offers a whole new level of user convenience. You can easily set the temperature, drying time, filament type, and even switch between °C and °F. The quick-select feature for recommended settings means you don’t have to guess—the device suggests the best parameters for a specific material, so you achieve optimal results without experimentation.360° Even Drying – Maximum Effectiveness in Every SituationAn advanced 360° circulation and heating system ensures even moisture removal from the entire filament spool. Regardless of the material type or moisture level, the filament is thoroughly prepared for printing. This solution significantly improves print quality and allows you to fully utilize your printer’s potential.Versatility and convenience – one device for all filamentsThe SUNLU S2 works with most filaments available on the market and supports all standard diameters: 1.75 mm, 2.85 mm, and 3.00 mm. The ability to dry the filament while printing ensures it remains in perfect condition throughout the entire process. Quiet operation (below 10 dB) and a well-thought-out design make this device an indispensable tool for anyone who wants to print better, faster, and without unnecessary complications.Included: SUNLU S2 Filament Dryer Power adapter User manual Manufacturer Sunlu Model Fila Dryer S2 Drying temperature range 45–70°C Temperature range for materials PLA/PLA+/WOOD: 45–50°CPETG/PVB/ABS/ABS+/HIPS/PVA/ASA/TPU/PMMA: 50–55°CPA/PC: 60–70°C Recommended drying time 3–6 h Heating system 360° circulating heating Display Touchscreen LCD Controls Touch panel, one-click settings Supported filament diameters 1.75 mm / 2.85 mm / 3.00 mm Material compatibility PLA, PLA+, PETG, TPU, ABS, PA, PC, and others Operating function Drying during printing Noise level

Sunlu SP2 filament dryerThe Sunlu SP2 is a modular 2-in-1 filament dryer that combines effective drying with airtight storage for 3D printing materials. The design consists of a heating base and a storage container, allowing the device to be used flexibly depending on your needs. The containers themselves can be stacked on top of each other to better utilize your workspace. This is a practical solution for those who want to improve filament storage conditions while simplifying daily material handling.Drying and storage in a single systemThe SP2 model is designed so that the drying process does not need to be separated from storage. The efficient heating base removes moisture, while the airtight container helps keep the filament in optimal condition even after drying is complete. The top and bottom silicone lids provide excellent sealing and thermal insulation. In storage mode, the device can maintain an internal humidity level of approximately 25% at an average ambient humidity of about 50%.Airtight design and humidity controlThe device is equipped with a carrying handle and a recess in the bottom, making it easy to move and position comfortably. A built-in hygrometer allows for real-time monitoring of internal humidity, while three cable ports on each side enable better adaptation to various printing configurations. The modular design simplifies workspace organization, and the ability to stack containers helps save space in both small workshops and larger studios.Large capacity and wide compatibilityThe Sunlu SP2 supports spools weighing from 0.25 kg to 3 kg and works with filaments of 1.75 mm and 2.85 mm diameter. The chamber can hold two 1 kg spools, one 2 kg spool, or one 3 kg spool, with a maximum spool size of 250 mm in diameter and 153 mm in width. After attaching the guide roller, it is also possible to use a paper spool, and the spool holder allows for the stable mounting of damaged spools as well.Adjustable temperature and improved printing performanceThe SP2 operates within a temperature range of 35°C to 70°C, making it compatible with most popular filaments, such as PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, and PA/PC. Removing moisture from the material helps minimize printing issues such as stringing, nozzle clogging, and poor layer adhesion. The manufacturer provides recommended drying settings for various materials, making it easy to select the appropriate parameters for each filament type.Safe and refined operationThe SP2 model utilizes a 200 W PTC heater supported by a fan, an additional overheat protection switch, and intelligent temperature control via software. This triple safety design enhances the reliability of the heating process and allows for greater peace of mind when using the device. The maximum operating power is 250 W, and power consumption in standby mode does not exceed 1 W, making it highly efficient for everyday use.Included Heating base Storage container Hygrometer Desiccant Desiccant container Power cord Reel Air valves PTFE tubes User manual Specifications Manufacturer Sunlu Model SP2 Product dimensions 278 × 208 × 396 mm Internal dimensions 265 × 193 × 274 mm Net weight 3.6 kg Gross weight 4.1 kg Operating conditions 10°C–35°C Operating relative humidity ≤95% Compatible filament diameters 1.75 mm, 2.85 mm Maximum spool size 250 × 153 mm Supported spool weight 0.25–3 kg Example spool configuration 2 × 1 kg, 1 × 2 kg, 1 × 3 kg Operating temperature range 35°C–70°C Supported materials PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, PA/PC Humidity display range 10%–90% Operating time range 0–99 h Power supply AC 110V / 220V Maximum operating power 250 W Standby power ≤1 W PTC heating power 200 W Hygrometer Yes Stackable Yes Recommended maximum layers 3 Silicone seal Yes

Sunlu S4 Filament DryerThe SUNLU FilaDryer S4 is an advanced filament dryer designed for demanding 3D printing users. It offers a massive capacity—drying up to 4 spools (1 kg each) simultaneously—and the ability to work with multiple printers at once. With a power output of 320–330 W, rapid heating (up to 50°C in just 30 minutes), and a maximum temperature of 70°C, the device ensures effective and uniform drying of even the most demanding materials, such as PA or PC. The built-in humidity control system, touchscreen, 8 filament outputs, and predefined material profiles make using the device not only effective but also extremely convenient.Dry up to 4 filaments simultaneously – maximum productivityThanks to the large chamber (450 × 210 × 211 mm), you can dry up to four spools of filament at the same time. This is the perfect solution for multicolor printing or working with multiple printers simultaneously. You don’t waste time changing materials—everything is ready in one place, which significantly speeds up and streamlines the entire process.Instant heating and high power – efficiency that makes a differencePerformance is ensured by a PTC heater with a power of up to 330 W, which allows it to reach 50°C in about 30 minutes and a maximum of 70°C. This means shorter filament preparation time and greater drying efficiency. Even difficult, hygroscopic materials regain their properties faster than ever before.Ideal temperature balance – perfect drying for every spoolA three-fan system (on the sides and bottom) ensures even air circulation and temperature stability within ±3°C. This ensures that every section of the filament is dried evenly, resulting in better print quality, greater consistency, and no surprises during operation.Smart humidity control – filament always in perfect conditionAn advanced humidity control system automatically starts drying when the humidity level exceeds the set range (30–50%) and stops the process once optimal conditions are reached (approx. 25%). This means full automation and the assurance that the filament is always ready for use—without manual monitoring.Safety and ease of use – technology you can rely onThe SUNLU S4 is equipped with a triple safety system: a PTC heater, a temperature sensor, and software protection. The device monitors temperature in real time and alerts you to any abnormalities, ensuring safe operation. Additionally, the touchscreen and pre-set profiles for PLA, ABS, PETG, TPU, PA, and PC simplify operation and eliminate the guesswork involved in settings.Full compatibility and flexibility – tailor the equipment to your needsSupport for filaments with diameters of 1.75 mm, 2.85 mm, and 3.00 mm, along with compatibility with most 3D printers, ensures the SUNLU S4 performs well in any environment. Eight filament outputs and the ability to connect multiple printers simultaneously allow for flexible workstation configuration. This device truly expands your capabilities and lets you create without limits.Included: SUNLU S4 Filament Dryer Power cord PTFE tubes User manual Manufacturer Sunlu Model Fila Dryer S4 Rated power 320–330 W Power supply AC 100–240 V / 50–60 Hz Maximum temperature 70°C Heating time to 50°C approx. 30 minutes Capacity 4 spools (1 kg each) Internal dimensions 450 × 210 × 211 mm Device dimensions 516 × 278 × 350 mm Net weight 4.8 kg Gross weight 5.5 kg Heating system PTC + 3 fans Temperature stability ±3°C Humidity control Automatic (start 30–50%, stop approx. 25%) Supported materials PLA, ABS, PETG, TPU, PA, PC Supported filament diameters 1.75 mm / 2.85 mm / 3.00 mm Number of filament outlets 8 (can be used with PTFE tubes) Display Touchscreen LCD

Anycubic ACE 2 Pro Multi-Filament System for the Kobra S1The Anycubic ACE 2 Pro is an advanced multi-filament system that opens up new possibilities in 3D printing, allowing you to create models in up to 16 colors. It supports 4 colors as standard, but connecting four units allows you to significantly expand the color palette and tackle more complex projects. The system is compatible with Anycubic printers such as the Kobra 3, Kobra 3 V2, Kobra 3 Max, Kobra S1, Kobra S1 Max, and Kobra X, offering great flexibility in adapting to your existing equipment.Smooth and fast filament feedingThe device uses 4 independent brushless motors that ensure stable, quiet, and precise operation. A new-generation buffering mechanism ensures smooth filament feeding and retraction, eliminating the risk of jams in each channel. Loading speed has been increased to 50 mm/s, a 100% improvement over the previous version, and filament change time has been reduced to approximately 56 seconds, saving up to 47 minutes over 100 changes.Optimal conditions thanks to drying and humidity controlThe ACE 2 Pro system allows for simultaneous filament drying and printing, keeping the material in optimal condition throughout the entire operation. Built-in temperature and humidity sensors monitor conditions in real time, and a solenoid valve actively removes excess moisture. An additional silicone ring seal protects the filament from external factors, resulting in better print quality and a lower risk of errors.Durable construction and quiet operationThe input ports, made of alumina ceramic, are highly wear-resistant, which extends the device’s lifespan and reduces the need for maintenance. Brushless motors offer a lifespan of at least 5,000 operating hours. At the same time, the device operates very quietly—below 48 dB with the door closed, and around 55 dB during active drying—allowing for comfortable use even in enclosed spaces.Easy maintenance and quick jam removalThe use of external feed channels and a quick-release mechanism allows for instant disassembly and removal of any jams. As a result, servicing takes only a few seconds and requires no complicated tools, significantly enhancing user convenience.Smart printing assistanceThe built-in smart assistant system offers features that genuinely simplify daily work. The device estimates the amount of filament remaining on the spool, automatically switches to a new spool when it runs out, and recognizes Anycubic filaments and their parameters (when connected to the internet). This makes the printing process more predictable and maintenance-free. Manufacturer Anycubic Model Ace 2 Pro Product code DS20-IP-O Dimensions 368 × 291.5 × 236.5 mm Weight 3.7 kg Enclosure material ABS/PC Motors 4 × brushless motors Filament compatibility PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dry), BVOH (dry), PP, POM, HIPS, PLA-CF, PETG-CF, PAHT-CF, TPU (for ACE), PVB Filament diameter 1.75 mm Spool compatibility Spool outer diameter: 195–200 mmSpool width: 60–68 mmSpool thickness: 3–6 mm Smart filament identification Supported Filament end detection Supported Automatic print resume Supported Maximum drying temperature 65°C Drying efficiency Suitable for: PLA, PETG, PVB, TPUCompatible but not optimized: ASA, ABS, PET, PA, PC, PP, BVOH, POM, HIPS, fiber-reinforced materials Active humidity control Supported Sealed chamber Supported External PTFE tube Supported Temperature and humidity monitoring Temperature and humidity levels (visible in the app, slicer, and on the printer screen) Rated power 220 V: 330 W (max.)110 V: 235 W (max.) Printer compatibility Kobra 3 / Kobra 3 V2 / Kobra 3 Max / Kobra S1 / Kobra S1 Max / Kobra X

Creality Ender-3 V3 3D PrinterCreality Ender-3 V3 is an advanced 3D printer that combines cutting-edge technology, stable design and intuitive interface to offer professionals and enthusiasts a tool for creating precise prints. With FDM (fused deposition modeling) technology, the printer provides high-quality prints in a variety of materials.Powerful printing functionsThe printer allows modeling in a variety of materials, such as PLA, TPU, PETG, ABS, PLA-CF, PETG-CF and CR-carbon, offering a wide range of design possibilities. It offers filament detection functions, which prevents interruption of the printing process. It takes place at speeds of up to 600 mm/s, and the coordinated movement of the X- and Z-axis is driven by two motors attached to the base, which increases the accuracy of the Z-axis and enables better quality prints. The printer supports the Gcode file format and allows printing from a USB drive, via LAN or from the cloud.Advanced designThe Ender-3 V3 features a new metal construction with die-cast parts for greater stability and durability. The gantry and base are made from a single piece of metal, further improving the accuracy of the Z-axis for better quality prints. The printer is also equipped with full-power direct extrusion, enabling clog-free extrusion for more than 1,000 hours. A 60-watt ceramic heater ensures full melting of filaments at high speed.Advanced coolingThe printer is equipped with a durable copper nozzle with a steel tip and titanium alloy heat shield. In addition, two powerful fans at the front and rear of the print head quickly and evenly cool the freshly printed section, ensuring excellent print quality even at high speeds.Easy operation and setupThe Ender-3 V3 offers automatic level detection and calibration, which prepares the printer for operation without the need for manual leveling. The printer is also equipped with a 4.3-inch HD color touchscreen that allows easy monitoring of the printing process, model previewing and temperature control with moving graphics. In addition, the printer features a Windows and Mac OS-compatible operating system, providing versatility in operation.Performance and precisionThe printer offers a maximum print speed of 600 mm/s and a maximum acceleration of 20000 mm/s^2, enabling fast and precise prints. The direct-driven extruder is reinforced with a helical spring and ball piston, ensuring strong filament gripping without slowing down. Extruder enhancements such as a side spring, ball piston and powder metallurgy lever further increase adhesion and extrusion force for precise printing.State-of-the-art printing featuresThe printer has an excellent software ecosystem that allows control and monitoring with Creality Print slicer and Creality Cloud APP. This system allows easy management and export of models. The spring steel base allows the model to be released with a slight bend, which is useful in the printing process. Manufacturer Creality Model Ender-3 V3 Modeling technology FDM Modeling dimensions 220 x 220 x 250 mm Leveling method automatic level detection Number of nozzles 1 pc. Extruder diameter 0.4 mm Layer thickness 0.1-0.35 mm Precision ±0.2 mm Nozzle temperature ≤ 300 Substrate temperature ≤ 110 Filaments PLA / TPU / PETG / ABS / PLA-CF / PETG-CF / CR-carbon Rated power 350 W Input voltage 100-120 V; 200-240 V; 50/60 Hz Filament detection Yes Lost power recovery Tak Printing method From USB disk / via LAN / from the cloud Print file format Gcode Clipping software Creality Print Operating system Windows / Mac OS Language Chinese, English, Spanish, German, French, Russian, Portuguese, Italian, etc.

AnyCubic Kobra 3 Combo 3D Printer K3CBBK0A-O