Adapter Power Supply

Techninės specifikacijos: Kamera 1/2.8” 3MP Progressive CMOS sensorius 3MP (2304 x 1296) Naktinis matymas: 30m atstumu 2.8mm fiksuotas objektyvas Matymo kampas: 104°(H), 55°(V),124°(D) Tinklas 1 x 100Mbps Ethernet Port Wi-Fi 6: IEEE802.11 ax/b/g/n, Dual Antenna Imou programėlė pritaikyta: iOS, Android ONVIF Video -amp;amp; Audio Vaizdo komresija : H.265/H.264 iki 25/30 fps kadrų per sek. 8x skaitmeninis priartinimas Integruotas mikrofonas ir garsiakalbis, 110dB sirena Dvipusis garsas Pagalbinės jungtys Micro SD kortelės lizdas (iki 256GB) Gamyklinio atstatymo mygtukas Pranešimų valdymas Judesio aptikimas Žmogaus aptikimas Konfigūruojamas regionas Automobilio aptikimas Bendri parametrai DC 12V1A Power Supply Galios sunaudojimas: -amp;lt; 12W Darbinė temperatūra: -30℃~+60℃, drėgmė iki 95%RH Medžiagiškumas: plastikas ir metalas  Kameros matmenys:  147.7 × 74.2 × 75.6mm Kameros svoris: 290g  CE IP67 Komplektacija: 1x kamera 1x maitinimo adapteris 1x šablonas gręžimui 1x tvirtinimo detalių komplektas 1x instrukcija 1x atsparus drėgmei kronšteinas

Notebook power supply HP 220V, 120W: 18.5V, 6.5A.   Adapter dimension (mm): 4.8*1.7mm  Replaces the original: PPP009L PA1650-02HC 384019-001 391172-001 239427-003 239704-001 HP-OK065B13 PPP009H PPP009S 239427-001 239427-003 239427-004 380467-004 402018-001 409843-001 371790-001  Compatible with:>/b> HP: HP Pavilion DV6000 Series  HP Pavilion DV8000 Series:  DV8000  DV8005  DV8010  DV8013  DV8026EA  DV8040  DV8080  DV8100  DV8110  DV8120  DV8130  DV8200  DV8210  DV8230  DV8230CA  DV8240  DV8240US  DV8290  DV8290EA  DV8310  DV8320  DV8370  DV8400  DV8408  HP Pavilion DV9000 Series:  DV9000  DV9000EA  DV9000T  DV9000Z  DV9010  DV9010CA  DV9010EA  DV9010TX  DV9010US  DV9020  DV9020TX  DV9020XX  DV9030  DV9040  DV9050  DV9050EA  DV9060EA  DV9060US  DV9070  DV9080  DV9085  DV9090  DV9095  HP Compaq 6820s  HP Compaq 6520s  HP Compaq NC8230 NC8430 ________________________ Power supply: 220V Warranty: 24 months Manufacturer: Extra Digital, EU

The multi-port USB-C 5Gbps AXAGON HMC-5H60 5in1 hub expands your laptop, computer or phone with five ports. Via the double-sided USB-C connector, you can quickly and easily connect a monitor and three USB devices to the computer at the same time. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 5in1 docking station for modern laptops. The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C (PD) connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/120Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3, 4 port and above. The compact and slim aluminium body not only looks great, but also provides mechanical durability and passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (connection to laptop): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W port, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz.  2K / WQHD resolution 2560 x 1440 at up to 120Hz.  FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). Support for up to 2-channel LPCM audio. Support fo

Delivers a continuous power supply, saving you the trouble of changing batteries in between recordings

Cycplus AL1 Electric InflatorThe Cycplus A2 Plus is a portable electric tire and ball inflator designed for fast and precise inflation. It offers a maximum pressure of 150 PSI, an automatic shut-off function, and a measurement accuracy of ±0.1 bar to safely set the target pressure. The compact design houses an easy-to-read, anti-glare LED screen and control buttons, all complemented by a convenient retractable hose.Fast pumping thanks to a powerful motorA specially designed high-power motor provides up to a 100% increase in pumping speed compared to standard solutions. In practice, this means you can inflate a 195/65R15 car tire from 2.0 to 2.5 bar in about 1 minute, and a full inflation from zero will take about 6 minutes. That's not the end of the possibilities, however. A motorcycle tire reaches 50 PSI in about 2-3 minutes, and a 700×25C road tire even reaches 120 PSI in about 1 minute. So you can get ready for the road ahead in no time!Precision and full pressure controlThe pump allows you to set a target pressure value, once it reaches it, it automatically shuts off. With an accuracy of up to ±0.1 bar, you can be sure that your tires are inflated exactly as needed. The anti-glare LED screen presents the current parameters in an easy-to-read manner, making it easy to operate even in more difficult lighting conditions.Powerful battery and powerbank functionThe Cycplus A2 Plus is equipped with a high-capacity battery of 3 × 2600 mAh, giving a total of 7800 mAh at 3.7 volts. Such a solution allows you to pump repeatedly without the need for frequent charging, and additionally allows you to use the device as an emergency powerbank. This is a practical support on the go when you need to recharge your phone or other mobile equipment.Two ways to power up and be ready for any situationThe device can operate in two ways: wirelessly, with USB-C charging and QC 3.0 support, and wired, with power via a DC outlet. This combination makes the pump ready to work both at home and on the road, regardless of access to standard power sources.Safe operation and effective coolingThe pump is designed for efficient heat dissipation. Mesh vents, a metal core to accelerate heat transfer and a built-in spiral fan take care of rapid cooling, allowing stable operation even under heavy use and reducing the risk of overheating.VersatilityThe A2 Plus is compatible with Presta and Schrader valves, making it suitable for inflating car, motorcycle and bicycle tires and balls. What's more, an additional LED emergency lighting function increases safety during nighttime stops and makes it easier to operate the unit after dark.Included Cycplus A2 Plus electric pump x1 Carrying case x1 USB-A to USB-C cable x1 DC power cable for car outlet x1 Valve extensions and adapters x3 Ball pump needle x1 User manual x1 Manufacturer Cycplus Name Cycplus A2 Plus Model AL1 Maximum pressure 150 PSI Measurement accuracy ±0.1 bar Battery capacity 3 × 2600 mAh (7800 mAh) Battery voltage 3,7 V Power supply Rechargeable (with USB-C QC 3.0 charging) / DC Compatible valves Presta, Schrader Dimensions Approx. 19.6 × 6.4 × 7.4 cm Additional features Powerbank, LED lighting

Caruba BMPCC 4K power supply cable

Hub USB 3.0 with 10 ports.  Features: The USB 3.0 port supports 5Gb/s data transfer rate, allowing you to transfer HD movies in seconds.Suitable for most devices with a USB 2.0 / 3.0 interface.All ports can operate simultaneously and independently of each other.Each port has a status LED indicator and an individual power switch.The adapter is compatible with Windows, Mac OS, Linux and Android operating systems.Supports surge protection.Aluminum housing.  Specifications: Input type: USB Type-A (M)Output type: USB Type-A x10.Output: 5V/ 2.4A.USB standard: 3.0.Transfer rate: up to 5 GB / s.Power supply: 12V / 4A.Dimensions: 228x56x23.4 mm.Housing material: aluminum.Color: dark gray.  Set includes: Adapter.Power cable.USB Type-B (M) - USB Type-A (M) cable.  Warranty: 12 months.

GODOX X1R-S Remote Trigger for SonyThe Godox X1R-S is a 2.4 GHz radio system receiver designed for Sony cameras with a Multi Interface Shoe (MIS). It allows for convenient, wireless triggering of flashes from a distance of up to 100 meters, providing greater freedom when working in the studio and on location. It supports TTL and High-Speed Sync (HSS) with shutter speeds up to 1/8000 s, allowing it to work seamlessly with modern strobes that support this feature. You have 32 channels and 5 groups at your disposal, which makes it easier to manage complex lighting setups and minimizes the risk of interference.Intuitive operation and broad compatibilityThe trigger is equipped with a clear LCD display that allows you to quickly check and change the most important settings. The device works with cameras equipped with a standard ISO hot shoe and a PC sync socket, offering great flexibility when working with various photography setups. Powered by two AA batteries for convenient use, the included C1 and C2 cables, sync cable, and 3.5 mm / 6.3 mm adapter make it easy to adapt the receiver to various equipment setups. Manufacturer Godox Model X1R-S Compatibility Sony MIS cameras Dimensions 7 x 6.5 x 4.7 cm Weight 0.07 kg Power Supply 2 AA batteries (R6) Groups/Channels 5/32 Display LCD Frequency 2.4 GHz Range up to 100 m

Yongnuo FJ-SW202719006000D is efficient power supply with a compact construction, designed for devices requiring a DC voltage 19 V and the intensity of 6 A. Powers Yongnuo lamp from the mains voltage of 100-240 V. The three-pin power plug is provided with a lock which prevents the accidental unplugging of the lamp socket.

This ultra-slim 7-port USB-C hub from LogiLink provides an instant expansion for your USB-C or Thunderbolt 3/4 laptop, tablet, or smartphone by adding seven USB 3.0 ports. The premium aluminum housing is exceptionally compact with a height of only 1 cm, making it perfect for professional use and travel. Featuring data transfer rates of up to 5 Gbps and an included 20 W USB-C power adapter, this hub ensures both fast connectivity and a reliable power supply for all your connected peripherals.

IB-HUB1700-U3 7-portowy HUBMain features USB 3.0 to a further 7 USB 3.0 Type-A ports Connection to the host computer: USB 3.0 Type-A with up to 5 Gbit / s Including 5 V / 3 A power supply unit Made from high quality aluminum Supports Windows and MacOS