Adapter Power Supply

The BLAUPUNKT OS6010 multifunctional sander delivers precision and efficiency with its 300W power. Its adjustable speed (7,000-12,000 rpm) adapts to different tasks, while interchangeable sanding feet-delta (140 x 140 x 100 mm), round (125 mm), rectangular (187 x 90 mm), and precision (30 x 90 mm)-offer versatility. A 1.8mm orbital movement ensures smooth sanding, and the Velcro sandpaper attachment allows quick changes. The dust extraction system, with a container and hoover adapter, keeps the workspace clean. A 2m power cable enhances convenience. Combining orbital and eccentric motion, it achieves both fast material removal and a fine finish. Technical data Power supply: 230 V ~ 50 Hz Rated power: 220 W, max power: 300 W Speed control, no-load speed: 7000-12000 rpm Replaceable sander base: Delta shape base: 140 x 140 x 100 mm Round base: 125 mm Rectangular base: 187 x 90 mm Finger sanding attachment: 30 x 90 mm Diameter of oscillating motion 1.8 mm Velcro sandpaper attachment function Dust extraction function Power cord 2 m Included: 1 x plastic dust container 1 x vacuum cleaner adapter Sandpaper grit of each shape: P60, P80, P120 Owner’s manual Dimensions: 20 x 13.5 x 10 cm Weight: 1.4 kg

6 data ports + 1 charge port AC power supply included Connect to PC by either USB-A or USB-C   Technical data Interface standard: USB 3.0 USB 3.0, USB 2.0 and USB 1.1 compliant Supports SuperSpeed (5 Gbit/sec), high-speed (480 Mbit/s), full-speed (12 Mbit/s) transfer rates USB 3.0 connectors: 6 x USB 3.0 A-female for data, 1 x USB A-female for charging 2.4A max, 1 x USB A-female for PC connection Supplying USB 3.0 ports with up to 900mA (with power adapter) Built-in overload protection (with power adapter) Power adapter for EU+UK type 230V AC, output DC 12V / 3.0A Can work without the AC power supply for low power consumption items   In the set: 1 Sandberg USB 3.0 Hub 7 ports 1 Quick guide 1 230V AC power supply for EU + UK 1 USB 3.0 connection cable USB-A to USB-A, 80 cm 1 USB 3.0 connection cable USB-A to USB-C, 80 cm

The multi-port USB-C 5Gbps AXAGON HMC-8HLSA hub 9in1 expands your laptop, computer or phone with nine ports. You can easily and quickly connect a monitor, three USB devices, Gigabit Ethernet network, headphones with microphone and an SD card reader to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 9-in-1 docking station not only for Windows laptops but also for Apple laptops such as MacBook Air or MacBook Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two of them with 5Gbps speed and one with 480Mbps speed for mouse or keyboard connection. The hub can also handle the permanent connection of multiple external drives at the same time. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface.  The USB-C connector is reserved only for charging of phone or laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This will also free up one USB-C port on your laptop. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported.  Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port, Thunderbolt 4 and above. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The audio output is connected to a 3.5 mm jack and allows the connection of stereo headphones with a microphone.  The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, monitor TV or projector to the phone. Input (laptop connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W (only for charging), USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 480Mbps port, USB-A female connector. USB-C hub can handle connecting multiple external drives at the same time. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz.  2K / WQHD resolution 2560 x 1440 at up to 120Hz.  FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4.  For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Dete

The multi-port USB-C 10Gbps AXAGON HMC-6G2L hub 6in1 expands your laptop, computer or phone with six ports. You can easily and quickly connect a monitor, three USB devices and a Gigabit Ethernet network to the computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 6-in-1 docking station not only for Windows laptops but also for Apple laptops such as MacBook Air or MacBook Pro. The USB hub offers three USB 10Gbps outputs. Two with standard USB-A and third with USB-C data connector. With the advanced USB 3.2 Gen 2 standard, you can connect high-speed devices such as NVMe M.2 external drives to all outputs at up to 2x the speed of 10 Gb/s compared to standard Gen 1 hubs with only 5 Gbps. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C (PD) connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/120Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3, 4 port and above. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. The compact and slim aluminium body not only looks great, but also provides mechanical durability and passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (connection to laptop): USB 10Gbps (USB 3.2 Gen 2), connector USB-C male. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 2x USB 10Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz.  2K / WQHD resolution 2560 x 1440 at up to 120Hz.  FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4.  For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10-