Adapteris Microsoft Surface

Adapter USB-C (M) to DisplayPort (F), 4K/60Hz, with gold-plated connectors.  Features:  The USB Type-C (M) to DisplayPort (F) adapter is designed to transfer digital data from a smart device to an external display expanding workspace and increasing productivity. This adapter allows you to transmit digital audio and 4K video from a tablet, laptop, smartphone or PC to a DisplayPort-enabled monitor, TV or projector. This adapter is an ideal solution for video presentations at trade shows and conferences, playing online games, editing multiple documents on a big screen or transmitting high-definition digital video in 4K, UHD video resolution up to 4096x2160 pixels. The adapter is backwards compatible with 4K@30hz or 1080p displays, and the Type C to DP adapter provides multi-stream (MST) support to daisy chain multiple displays. Hass-free connection plug and play, no additional software is required, just connect a device with USB Type-C or Thunderbolt 3 port to the monitor. Attention: a USB-C port that supports DisplayPort Alternate Mode or a Thunderbolt 3 port is required. The converter is equipped with an advanced active chip ITE IT6563FN to guarantee stable signal output. Durable and reliable: 24-carat gold-plated connectors prevent corrosion and increase connectivity.Braided Jacket pass 6000+ bending test. The adapter is light, portable, compact.  Technical specifications:  Signal type: digital video and audio. Connector 1: USB Type-C (M). Connector 2: DisplayPort (F). Transmission rate: 21.6 Gb/s. Resolution: 4K@60Hz, 1080P@120Hz. Material: aluminum shell + 24K gold plated wire + nylon braided wire. Conductors: (AWG32x2C+EAM)x4P + AWG32x1P + AWG32x4C + AWG28x1C + AWG26x1C + AB. Cable OD: 4.5 mm. Cable color: black.  Warranty: 12 months.  Compatible computers:  Apple MacBook Air/ Pro 13” M1. Apple 2021 MacBook Pro 14”. Apple M1 Pro/ Max 16”. Apple MacBook Pro 2020/ 2019/ 2018/ 2017/ 2016. Apple MacBook Air 2020/ 2019/ 2018. Apple Mac mini M1. Apple iMac M1. Apple iMac 2019/ 2018/ 2017. Apple iMac Pro. Apple MacBook 2015/ 2016/ 2017. Dell XPS 15/13. Dell Inspiron 5000/ 7000. Dell Inspiron Gaming 7000. Dell AlienWare 13/15 Microsoft Surface Laptop 3. Microsoft Surface Pro 7/ Go Google PixelBook Go. Google ChromeBook. Lenovo Yoga 920/ 910/ 900S/ 700. Lenovo ThinkPad X1/ S2/ X270/ X390/ T490. Huawei MateBook X Pro. Huawei MateBook D. Huawei MateBook 13. Huawei MateBook E HP Spectre Notebook. HP Envy 13. HP Elite X2. HP EliteBook Folio G1. HP Notebook PC. Compatible tablets:  Apple iPad Pro 2021/ 2020/ 2019/ 2018.  Compatible smartphones:  Google Pixel 4 XL. Google Pixel 3A XL. Google Pixel 3. Google Pixel 3 XL. Google Pixel 2. Google Pixel 2 XL. Samsung Galaxy S20 5G. Samsung Galaxy S20 Ultra 5G. Samsung Galaxy S20+. Samsung Galaxy Note 10. Samsung Galaxy Note 10 Plus. Samsung Galaxy Note 9. Samsung Galaxy Note8. Samsung Galaxy S10. Samsung Galaxy S10 Plus. LG G5/G6/G7/G8 ThinQ. LG V20/V30/V40/V50 Thin. LG Nexus 5X.

Slim metal USB-C 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMC-GL3A connects up to three USB devices to laptop or computer and also adds Gigabit network card which connects your computer to high speed network. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface is transfer speed up to 5 Gb/s. The Gigabit network adapter expands the computer with a fast and stable network connection, adds the missing RJ-45 network connector or adds another network card. The LAN adapter is compatible with 10/100/1000 Mbit/s speed and also offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load by checksums, the crossover detection and auto-correction, TCP large send offload, support for various modes of the Wake-on-LAN feature, the work with virtual LAN (VLAN) and advanced Power Management features. In modern operating systems from Windows 8.1 above, the adapter allows easy automatic installation without the need for an Internet connection The port replicator is the ideal accessory for ultrabooks with a small number of USB-A ports and without network card. The hub does not even frighten to connect with phones with UCB-C connector. You can connect a flash drive, keyboard and mouse to your phone or tablet. Some phones and tablets with the Android operating system, such as the Samsung S9 +, can be connected to the Internet with a network Ethernet cable thanks to this hub. Input:   1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type C male connector on a fixed 20 cm long cable. Output: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s).  USB hub handle the permanent connection of several external drives. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration

Slim metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-GL3A connects up to three USB devices to laptop or computer and also adds Gigabit network card which connects your computer to high speed network. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface is transfer speed up to 5Gb/s. The Gigabit network adapter expands the computer with a fast and stable network connection, adds the missing RJ-45 network connector or adds another network card. The LAN adapter is compatible with 10/100/1000 Mbit/s speed and also offers a wide range of features, such as IPv4/IPv6 checksum to reduce CPU load by checksums, the crossover detection and auto-correction, support for various modes of the Wake-on-LAN feature, the work with virtual LAN (VLAN) and advanced Power Management features. In modern operating systems from Windows 8.1 above, the adapter allows easy automatic installation without the need for an Internet connection. The port replicator is the ideal accessory for ultrabooks with a small number of USB-A ports and without network card. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Some phones and tablets with the Android operating system, such as the Samsung S9+, can be connected to the Internet with a network Ethernet cable with suitable adapter* thanks to this hub. Input:   1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector.     Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. USB Outputs: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. RJ-45 Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN feature support in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and Link Change Wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. RealWoW! technology support allows remote wake up over the Internet. Advanced Power Management features:The adapter supports advanced power management to reduce losses during standby or light traffic on the network. It further supports advanced power saving when the Ethernet cable has been disconnected.