Boom Arm Stand

The Manfrotto 061 Joining Stud is a 20 g aluminum hex stud that links two Super Clamp 035 units with six fixed 60° rotation steps, enabling precise angled double-clamp rigs for lights, arms, or accessories—measuring 5 cm tall with 5/8" ends. The Manfrotto 061 Joining Stud transforms two Super Clamp 035s into a versatile articulated mount. The precision-machined aluminum hex body features 5/8" (16 mm) baby studs on both ends and six indexed flats for 60° incremental locking—perfect for creating offset booms, sidearms, or dual-grip setups. At just 5 cm tall and 20 g, it adds negligible weight while ensuring rock-solid alignment. Ideal for mounting a backlight off a C-stand, rigging a monitor beside a camera, or building compact grip chains in tight spaces—pair with 035 clamps for endless studio or location configurations. Key features Dual 5/8" baby studs (16 mm) 6-step 60° indexed rotation Connects two Super Clamp 035 units Aluminum construction Compact 5 cm height Ultra-light 20 g Manfrotto 061 Joining Stud for Super Clamp Model: Manfrotto 061 Joining Stud Material: Aluminum Attachment: 5/8" (16 mm) baby male (both ends) Rotation: 6 positions (60° steps) Height: 50 mm Weight: 0.02 kg Compatibility: Super Clamp 035 (and compatible)

For most gamers’ list of waiting-for-upgrade peripheral, there is always a crucial item left behind, a boom arm stand. A good microphone does not necessarily mean good audio quality, but do not look in the wrong direction to try to get the best out of it in the first place. Without some knowledge base, it is tricky to use plugins for improving sound quality. So it is better not to get yourself entangled but to go for the most straightforward way: Set the level for the mic right and keep the mic as close as possible to the sound source with a proper angle. The top priority of an arm stand is to help with the talking range and angle. It also has a huge edge of convenience for setup and cable management over the desktop stand that comes with microphones.                 For those in the heavyweight range with an average of a 1.5-pound metal body, it is not every arm stand job to hold them up securely for a long time. Given the average weight an arm stand should carry in most cases, It is crazy that the FIFINE BM63 can handle around 4.4 pounds of weight, which is more than two of the heaviest desktop mics. No one will actually have two mics on one stand, but since it can hold up such mass weights while you do not need it to do that all the time, the durability will be crazy too. Mind you: the BM63 does hold up a wide range of weight of microphones, but because it uses a universal 5/8” thread, there will not be any problem of using any microphone with a standard thread with it.   It is wrong to assume that the BM63 arm stand can only be found in some expensive setup and holding a heavy-duty microphone. You do not have to have a quite heavy mic to get the best out of it and to keep the arms staying in place and not bumping up and down. One of the crucial jobs that it does is to be distraction-free. Even if you are using a lightweight mic, the arm will not bounce around or fall over even just a little bit after you put it in place. It literally sits still. The built-in stiff springs make it possible. And because of such a mechanism, the convenience keeps on coming. You do not have to lose and tighten back again the joint connection every time to set a proper angle. More importantly, the point of an arm stand is about sound improvement. The last thing you want to do is to generate noises on the stand to let the microphone pick up. Thus, the noise-free movement of the arm is the convenience that you mostly need. The FIFINE BM63 does it and will do it well in a long term!   It handles either a heavy or lightweight mic well, it also fits in a large or a small desk without any trouble. And with a 2 inches gap, the C-clamp is able to clip on most desks with a flat surface. Once you have the arm stand installed on your table, the microphone and the cable will always be connected so that you do not have to set up everything every single time. Whenever you need the microphone, you just pull it in front of your face. But that also brings us to the crucial question of whether the arms are long enough to cover the length from one side of the desk to the other side or from the back to the front. There is no better way to put this, but the BM63 has one of the longest arms, up to 15.5 inches each, for the price. That is a big positive if you have a big desk. And you do not have to worry about leaning to the side to record vocals or shout at your teammate in-game. As for the range of the angle for adjustment, the arm can be as down low as 45 degrees off the table if you are slouching in your chair, or can be overhead as well if you like it to be in that position. The redeeming feature is that it comes with three Velcro strips for cable management. Even without a cable slot on the arms, everything will still look nice and tidy. You do not have to worry about running over or getting stuck the cable on the floor.

RAZER SEIREN V3 MINI CLARITY MADE COMPACT Meet the Razer Seiren V3 Mini—an ultra-compact USB microphone that now packs even more. Featuring a new tap-to-mute function and advanced audio customization, enjoy studio-quality voice capture with the perfect pint-sized companion for gaming, streaming, and chatting. AVAILABLE IN Quartz | Black | White CONDENSER MIC Crystal-clear Voice Capture Fitted with a custom condenser capsule, the mic's impressive sensitivity can capture more detail especially at higher frequencies, ensuring it broadcasts your voice with stellar clarity and quality. Hear for yourself. SUPERCARDIOID PICKUP PATTERN Greater Voice Isolation A tighter pickup pattern allows the mic to focus on your voice while suppressing room noise, so you’ll never have to worry about sounds like typing or mouse clicks getting in the way. TAP-TO-MUTE SENSOR WITH LED INDICATOR Instant Control Whether you’re gaming, chatting, or streaming, instantly prevent audio mishaps by simply tapping the top of the mic, and tell at a glance if the mic is active or not with an LED status indicator. BUILT-IN SHOCK ABSORBER Dampens Noise Find your sweet spot with a tiltable mic stand that also features a built-in shock absorber to dampen noise caused by accidental knocks and bumps. Can be detached for a boom arm setup. PLUG-AND-PLAY DESIGN Fuss-free Setup Be ready to game, stream, or chat in seconds. Simply plug the USB mic to your PC and you’re good to go—no software or drivers required. Works with Discord, OBS Studio, and XSplit. Advanced Customization Via Razer Synapse One-stop Control Create the perfect setting from one powerful platform. Personalize the mic’s lighting, set studio-level sample and bit rates, manage your stream mix to set separate volume mixes for playback and your stream, and more.

Fifine BM66 Flexible Arm Mic Stand Sturdy Low Profile Suspension Arm Adjustable Microphone Arm Stand With Durable Clamp Product Name BM66 Mic Boom Arm Stand Color Black Logo FIFINE Usage Microphone Holder Weight 1.3kg Applicable Microphone Weight ＜1.5kg Clamp Clipping Thickness 20-60mm Horizontal Extension Length 360° Horizontal Rotation Angle 330G Vertical Rotation Angle Up 160° /Down 35°