Computer Power Supply

DarkFlash PMT1050 computer power supply (black) The DarkFlash PMT1050 power supply is a modern 1050 W unit designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases. ATX 3.1 and full PCIe 5.1 readiness The power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power output of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1050 model perfect for gaming computers and more! High efficiency and 80 PLUS Gold certification 80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, reduces component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours. Single +12 V rail and DC-to-DC conversion The use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card. Active PFC and power stability The power supply uses an active PFC power factor correction circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently and the power supply provides stable and clean power to all components. High-quality components and Japanese capacitors The power supply design uses Japanese electrolytic capacitors rated for operation at temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and there are also EMI filters inside to reduce electrical interference from the mains. In addition, heat sinks are used to minimize heat generation inside the power supply. Quiet and intelligent cooling The device is cooled by a 120 mm fan with a hydro bearing, which combines durability with quiet operation. An intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1050's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load. Advanced system protection DarkFlash PMT1050 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting your equipment from lightning strikes, among other things. Modular cabling and compatibility The power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize t

DarkFlash PMT1050 computer power supply (white) The DarkFlash PMT1050 power supply is a modern 1050 W unit designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases. ATX 3.1 and full PCIe 5.1 readiness The power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power output of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1050 model perfect for gaming computers and more! High efficiency and 80 PLUS Gold certification 80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, reduces component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours. Single +12 V rail and DC-to-DC conversion The use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card. Active PFC and power stability The power supply uses an active PFC power factor correction circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently and the power supply provides stable and clean power to all components. High-quality components and Japanese capacitors The power supply design uses Japanese electrolytic capacitors rated for operation at temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and there are also EMI filters inside to reduce electrical interference from the mains. In addition, heat sinks are used to minimize heat generation inside the power supply. Quiet and intelligent cooling The device is cooled by a 120 mm fan with a hydro bearing, which combines durability with quiet operation. An intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1050's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load. Advanced system protection DarkFlash PMT1050 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting your equipment from lightning strikes, among other things. Modular cabling and compatibility The power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize t

Uni-T UT612 LCR MeterThe Uni-T UT612 LCR Meter is an advanced measurement tool designed for accurate testing of inductance, capacitance, and resistance over a wide range—from 20 µH to 2000 H, 200 pF to 20 mF, and 20 Ω to 200 MΩ. The device operates at five test frequencies (100 Hz, 120 Hz, 1 kHz, 10 kHz, and 100 kHz), offering series and parallel measurement modes and support for parameters such as L, C, R, DCR, Q, D, θ, and ESR. Thanks to its high accuracy, automatic LCR component recognition, and a USB interface capable of storing up to 60,000 results, the UT612 is ideal for use on production lines, in component inspection, and in electronics repair.Extensive measurement functionsThe meter offers not only basic LCR measurements but also more advanced options, such as measuring the quality factor, loss, or phase angle. The comparison function and deviation measurement help quickly assess whether a given component falls within the specified tolerances, which speeds up quality control and diagnostics. Thanks to the USB interface, the meter can be connected to a computer and up to 60,000 measurement results can be saved. This solution is particularly useful where long-term data documentation and analysis are important. The automatic shut-off feature helps conserve battery life, and the low-battery indicator (≤6.8 V) prevents unexpected interruptions. The device can be powered by either a 9V battery or via USB, offering greater flexibility. The kit includes, among other things, an SMD probe, a USB cable, and software, so the meter is ready to use right out of the box.Included Battery SMD probe USB cable Multifunction socket User manual Manufacturer Uni-T Model UT612 Inductance 20 µH ~ 2000 H (±0.5% + 5) Capacitance 200 pF ~ 20 mF (±0.5% + 5) Resistance 20 Ω ~ 200 MΩ (±0.3% + 5) Supported parameters L, C, R, DCR, Q, D, θ, ESR Test frequencies 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz Test voltage 0.6 Vrms Display LCD (40 × 63 mm) Counts 20,000 D/Q counts 2,000 D/Q resolution 0.001 Power supply 9V battery (6F22) or USB power Dimensions 96 × 193 × 47 mm Weight 374 g

SkyRC T1000 Maestro chargerSkyRC T1000 Maestro is a new, incredibly powerful RC model charger that stands out with up to 450W (AC) or even 1000W (DC). It uses an advanced Arm Cortex-M4 core and is equipped with a color display that will provide you with the most important information regarding its operation. It allows you to use 2 ports at the same time, and you will have no problem transporting it. Special Charger Master software is also available, which provides even more capabilities.Reliable performancePush the limits with the SkyRC T1000 charger and get more options for your next RC race. The product supports advanced DSP technology and has a state-of-the-art Arm Cortex-M4 core, which also uses a coprocessor (FPU). As a result, it can deliver incredible speed, performance and reliability! Bet on proven solutions and choose a charger that works in almost every situation.Even faster chargingEnjoy even faster charging. The charger is equipped with 2 ports that will allow you to charge 2 batteries simultaneously in a short time. You can also choose between AC and DC input. In AC mode, the charging power reaches 450W, and in DC mode it is up to 1000W! This will charge your batteries up to 9 times faster (in AC mode) or up to 20 times faster (in DC mode) than with standard chargers.Intelligent power distributionWhen you use only one port, the charger will direct all its power to that port and provide up to 20A. When you use both ports, the charging current parameters will be dynamically and intelligently divided between each of them. So you can enjoy optimal performance in most situations! What's more, when one port finishes working, the other will start charging at full capacity. When using 2 outlets simultaneously, the total current is up to 35A.Digital power supplyThe T1000 will not only perform well as a charger, but can also act as a digital power supply. All it takes is a few clicks on its menu! The product offers a voltage of 5-27V with 0.1V increments and an adjustable current of 1-15A. It is also equipped with short circuit, overload and reverse polarity protection. Thus, it provides unparalleled performance and safety!Additional capabilitiesDo you care about additional capabilities? Try the separately available devices that work with the charger! For example, the BD350 discharger provides a maximum of 40A. In combination with the T1000 Maestro, it also allows you to check the condition of the battery using Charger Master software. There is also a charging hub that can handle up to 150W and offers up to 4 ports (3x USB-C, 1x USB-A).User-friendly interfaceThe charger features an easy-to-read 2.8″ TN LCD screen with a clear ColorX interface. It provides a resolution of 240x320 and displays the image in 262,144 colors. Also noteworthy is the 250:1 contrast ratio. Responsive Web2.0 menus and specially designed icons make operating the device much simpler and more pleasant! What's more, the interface offers 4 languages to choose from - English, Dutch, Chinese and Japanese.Will prove itself while travelingTake the charger to your next RC event and don't sacrifice the ability to quickly charge your batteries while you're away. The T1000 Maestro is compatible with 100-240V, which means you can use it in many countries around the world without any problems. The product is also equipped with a special handle, which makes it much easier to carry.Try out the Charger Master softwareGet convenient access to the most important information - just use the Charger Master software. Simply connect the T1000 charger to your computer with a USB-C cable! Once you do, for example, you can download OTA updates and sync the latest software version to the cloud in real time. You can also view a graph of charging/discharging data.In the box T1000 charger AC power cable User manual Brand SkyRC Model T1000 Input voltage AC: 100-240V (50 / 60Hz);DC: 10-30V; Input current 35A max. Charging power AC: 450W max;DC: 1000W max; Discharge power Main port:

DarkFlash PMT1250 computer power supply (black) The DarkFlash PMT1250 power supply is a modern 1250 W unit, designed in accordance with the ATX 3.1 and PCIe 5.1 standards, intended for high-performance gaming computers and professional workstations. The single +12 V line design provides stable power to the most demanding components, and power consumption of less than 0.5 W in standby mode ensures greater energy efficiency. In addition, the 80 PLUS Gold certification confirms high energy efficiency of up to 93%, and the compact dimensions of 140 × 150 × 86 mm ensure compatibility with most computer cases. ATX 3.1 and full PCIe 5.1 readiness The power supply has been fully adapted to the ATX 3.1 specification, offering support for a new generation of components. The integrated 12V-2x6 cable with a power of up to 600 W allows direct power supply to modern PCIe 5.1 graphics cards. This design allows for up to twice the rated power to be used momentarily, ensuring stable system operation under heavy load. All this makes the PMT1250 model perfect for gaming computers and more! High efficiency and 80 PLUS Gold certification 80 PLUS Gold certification confirms the high energy efficiency of the power supply across a wide load range. Efficiency of up to 93% reduces energy losses, minimizes component heating, and supports stable, long-term system operation. These parameters make the power supply a suitable solution for computers that work intensively for many hours. Single +12 V rail and DC-to-DC conversion The use of a single high-efficiency +12 V rail allows almost all of the power supply's power to be delivered to the most important components of the system. The DC-to-DC conversion circuit converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and minimal fluctuations even with dynamic load changes. This solution increases the reliability of the processor and graphics card. Active PFC and high-quality components The device uses an active PFC circuit with up to 99% efficiency. This solution improves energy efficiency, reduces power loss, and reduces electromagnetic interference. As a result, electricity is used more efficiently, and the power supply provides stable and clean power to all components. What's more, the design uses Japanese electrolytic capacitors rated for temperatures up to 105°C. The system is based on pulse transformers responsible for transferring power from the input to the output, and inside there are also EMI filters, whose task is to reduce electrical interference from the mains. Also noteworthy are the heat sinks, which minimize heat generation inside the power supply. Quiet and intelligent cooling A 120 mm fan with a hydro bearing, which combines durability with quiet operation, is responsible for cooling the device. The intelligent temperature control system automatically adjusts the speed to the current load on the power supply. All this translates into comfortable computer operation. What's more, the PMT1250's housing has been designed for efficient airflow. The top panel uses a regular square ventilation pattern, while the rear panel is based on a honeycomb structure. This solution enables rapid heat dissipation and allows for stable operation even under high load. Advanced system protection DarkFlash PMT1250 offers an extensive set of seven protections that protect both the power supply and computer components. The mechanisms used include protection against overvoltage, overcurrent, overload, short circuit, overheating, undervoltage, and no-load operation. In addition, the design includes a Surge 4K surge protection system, which provides greater peace of mind during storms – protecting equipment from lightning strikes, among other things. Modular cabling and compatibility The power supply features a fully modular design with flat cables, allowing you to connect only the necessary cables and making it easier to organize the interior of the case. It is also compatible with th

FNIRSI IPS3608 Intelligent Digital AC-DC Power SupplyThe FNIRSI IPS3608 is an intelligent, programmable digital power supply designed for precise and stable operation with electronics. It offers high power, clean power with low interference, and automatic voltage and current control modes. The robust aluminum housing with active cooling ensures reliability, while the easy-to-read color display with angle adjustment and light and dark themes enhances user comfort. The device supports presets, advanced software functions, and computer connectivity, while built-in USB ports with fast charging expand its applications. The whole is complemented by an extensive security system that protects both the power supply and the connected equipment.Precision in an advanced formThe FNIRSI IPS3608 is designed for demanding laboratory, service, and research applications. It offers 285 W of power and ultra-low ripple of 10 mV, which translates into exceptionally clean and stable power. The use of high-quality MOSFET transistors in combination with an LC filter increases energy efficiency and effectively reduces interference, ensuring low noise levels even when working with sensitive electronics.Stable conditions and repeatable resultsThe power supply allows for precise control of constant voltage and constant current modes, automatically switching between Auto CV and Auto CC depending on operating conditions. Such parameter control guarantees uniform processes, including precise experiments requiring stable conditions, and ensures reliable, repeatable measurement results. In addition, thanks to its refined power supply design, the FNIRSI IPS3608 delivers power with very low interference.Durability and stability of operationThe full CNC-machined aluminum housing ensures a professional appearance, as well as high mechanical resistance and effective heat dissipation. The intelligent cooling system with an active fan automatically maintains the optimum operating temperature, which translates into stable operation and long service life of the device, even with intensive use.Comfortable operation at every workstationThe power supply is equipped with a 2.8-inch TFT color display that presents real-time data in a clear and transparent manner. Adjustable brightness allows you to adapt the screen to lighting conditions, and the ability to change the angle of inclination facilitates comfortable work in various workstation configurations. The interface offers three view modes and two color themes—light and dark—allowing you to quickly customize the appearance to your preferences. An additional safety feature is the rear power switch, which reduces the risk of accidental startup.Effective work without unnecessary interruptionsThe FNIRSI IPS3608 allows you to save up to six sets of presets covering voltage, current, and protection limits. The quick start and stop function with a single button significantly improves work, especially in situations requiring frequent parameter switching or repetitive tests. The device works with computer software that allows you to view parameters in real time, record voltage and current curves, and conveniently manage presets. For more advanced users, features such as sequential output and voltage and current scanning are available, paving the way for comprehensive analysis and automated testing.A single power source for the entire workstationThe power supply is equipped with USB-A and USB-C ports that support fast charging standards, including PD, QC, FCP, SCP, and AFC. This allows it to serve as a reliable power source not only for the systems under test, but also for smartphones and mobile devices used in everyday work. Importantly, the equipment offers a full set of eight protections, including protection against overvoltage, overcurrent, overload, undervoltage, overheating, reverse polarity, reverse current, and short circuit.Included digital power supply power cable alligator clips USB data cable user manual Manufacturer

Longer Ray5 miniS laser engraver (2.5 W)Do you create small items, markings, decorations, or your first handmade products at home? The Longer Ray5 miniS laser engraver allows you to engrave materials without direct exposure to the laser beam. The 2.5 W device is pre-assembled and ready to use right out of the box, so instead of wasting time on assembly, you can start your project right away. The 130 × 140 mm working area and speed of up to 12,000 mm/min allow you to work comfortably on your desk, workbench, or in a small studio.Details that look like they came from a professional workshopA 0.04 × 0.04 mm laser spot and 0.04 mm engraving accuracy allow you to reproduce fine lines, small letters, and subtle patterns without blurring the edges. Thanks to the 2 mm spacer block, focusing is mechanical and repeatable – you lower the module to contact the block and you can be sure of the correct focus. In practice, this means a clean engraving contour on wood, leather, or acrylic without trial and error for each material. Even small jewelry items, key chains, or nameplates retain the sharpness of detail that is often lost with weaker lasers. This precision allows you to sell or give away the finished product without corrections.Projects you can finish in one sessionA speed of up to 12,000 mm/min combined with a 130 × 140 mm field allows you to complete most small DIY projects in a short time. You can engrave a series of key rings, coasters, or product labels in a single work session instead of spreading the work over several days. This scale is well suited to handmade creators and micro-sellers who operate in small quantities. The compact work area also promotes optimal use of material. With the Longer Ray5 miniS, the creation process remains fast and predictable.Personalization on hundreds of materials – from idea to productThe 2.5 W 450 nm diode laser allows you to engrave over 300 materials and, depending on their thickness, also cut them, from wood and leather to acrylic, metal, and ceramics. You can mark products, create decorations, personalize gifts, or prepare elements for further assembly. The Longer Ray5 miniS is suitable for a variety of applications, so you don't have to invest in multiple tools for different materials. This is especially important when you are creating at home and your workspace is limited.Freedom of engravingUSB and Wi-Fi connectivity and support for mobile apps and LaserGRBL or LightBurn software on Windows, macOS, Linux, Android, and iOS allow you to prepare your project on your computer or directly on your smartphone. Once the file is uploaded, the device can work offline, so you don't need to maintain a constant connection or occupy your computer while engraving. You can prepare your project at your desk and start the job later in your workshop or another room. Stable data transmission minimizes the risk of interrupting the task in progress.Stress-free workThe enclosure with a cover, door sensor, axis limit switches, and emergency stop button form a safety system characteristic of Class I devices. If the cover is opened, the work is interrupted and the mechanics stop in a controlled manner. An exhaust fan removes fumes from the working chamber, improving comfort when working in a closed room. This design allows you to engrave at home or in a small studio without direct exposure to the beam or moving parts.Quick start to creationThe aluminum alloy body, weighing 2.89 kg and measuring 307 × 320 × 197 mm, makes the device easy to place on a desk or move between workstations. Pre-assembly means that once you connect the power supply and data cable, you can get started on your first project right away. The kit includes safety glasses, a focus block, tools, and accessories needed to get started, so you don't have to buy equipment separately. This is especially convenient when you're just starting out with lasers.Included: Machine frame Laser module Power supply Data cable Safety glasses Focusing block Wre

Uni-T UT512 High-Voltage Insulation Resistance TesterThe Uni-T UT512 High-Voltage Insulation Resistance Tester is an advanced measuring device designed for diagnosing electrical installations and large machinery, such as transformers, generators, and high-voltage motors. It offers a wide range of test voltages up to 2500 V, insulation resistance measurement up to 100 GΩ, as well as PI and DAR functions that help assess the condition of insulation over time. Thanks to the built-in memory, it is possible to save up to 18 sets of results, which can then be transferred to a computer via USB. The included software enables data analysis, which is particularly useful for regular inspections and documenting the condition of the installation. A large, high-resolution screen with a 30-segment bar graph allows you to quickly assess the result without having to analyze the numbers in detail. The backlight facilitates work in low-light conditions, and the intuitive operation makes the device suitable for use both in the field and in the workshop.Included in the set Uni-T UT512 Insulation Resistance Tester Red test lead (two-pin) with alligator clip Test leads (single-pin) with alligator clips (2 pieces) AC adapter USB cable CD with PC software Battery set (8 × 1.5V LR14) Manufacturer Uni-T Model UT512 Test voltages 500 V, 1000 V, 2500 V Insulation resistance measurement range up to 100 GΩ Measurement accuracy up to ±(3%+5) (depending on range) Data memory 18 sets Display 9999 with analog bar graph (30 segments) Features Continuous measurement mode, auto power off, LCD backlight, automatic current discharge Power supply 8 × 1.5V battery (LR14) Dimensions 202 × 155 × 94 mm Weight approx. 1.8 kg Certifications CE, UKCA