Dji Mini 4 Pro

Li-polymer battery for drone DJI Mini 3 Pro. Provides up to 34 minutes of flight time. Technical specification: Capacity: 3850mAh. Battery type: li-polymer. Max charge voltage: 8.5V. Nominal voltage: 7.38V. Operating temperature: 0-40°C. Compatibility: DJI Mini 3. DJI Mini 3 Pro. DJI Mini 4. Warranty: 12 months. Importer: Eurodigital, EU.

SMALLRIG 5524 SLING HANDLE FOR DJI RS 2/ RSC 2/ RS 3/ 3 PRO/ MINI/ RS 4/ PRO/ MINI (BUMBLEBEE) 5524

Storage Bag Sunnylife for DJI Mini 4 Pro AQX-12

DJI Mini 4 Pro inteliģentā lidojuma baterija ar 2590 mAh ietilpību nodrošina līdz 34 minūtēm lidojuma laika ar ātru uzlādi un augstu veiktspēju.

SmallRig Cage for Nikon Z 8 3940 is designed to protect the camera and attach accessories. Locking the camera via one bottom 1/4 "-20 screw, one locating screw, and one side lock adapter on the right, the cage features rubber pads that prevent scratches and gives full access to buttons, card slots, flip screen, and battery door. Among its accessory mounting points, 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole support Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Plate 1280, mini V Mount Battery Plate 2987; side 1/4"-20 locating hole fits Single Rod Clamp 3598 and Magic Arm 3873; and left NATO rail quickly connects Side Handle 3847 & 4017. Besides, there are cold shoe mounts for the microphone and LED video light; strap holes for Hand Strap 3848; and QD mounts for the QD strap buckle. The bottom Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between gimbal, handheld, and tripod modes. A double-ended wrench is also included for easy disassembly and assembly. 1. Full cage protects the camera without blocking buttons. 2. Locks camera via one 1/4"-20 screw at the bottom, one locating screw, and one side lock adapter on the right. 3. 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole, cold shoe mount, NATO rail, QD mount, strap slot. 4. Arca-Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals. Note: Please remove the split ring on the right of the camera before installing this cage. Compatible With Nikon Z 8 Cage x 1 User Manual x 1 Product Dimensions: 159.1 x 56.8 x 131.0mm Package Dimensions: 184.0 x 178.0 x 80.0mm Product Weight: 203.0 ± 5.0g Package Weight: 371.5 ±5.0g Material(s): Aluminum Alloy

SmallRig Camera Cage for Nikon Z f 4261 is designed to protect the camera, attach accessories, and improve grip. It locks Nikon Z f via one 1/4“-20 screw on the bottom and one M2.5 screw on the right, with rubber pads preventing scratches. The cage comes with an ebony handle, ergonomically designed for comfortable grip and texture, and maintains full access to buttons, card slots, a flip screen, and a battery door. On the top, it shares elements and usage experience with Nikon Z f. Just press to control the dial. Among its mounting points, 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole and cold shoe support Side Handle 2093C / 4016 / 3847, Top Handle 3765, Monitor Mount 2903 / 2904, mini V Mount Battery Plate 2987, Single Rod Clamp 3598, Magic Arm 3873, Microphone 3468, LED Video Light 4055, etc. Besides, there are strap holes for Hand Strap 3848 / 3926, Neck Strap 3485, QD mounts for Shoulder Strap 4118, and a bottom Arca Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for quick switch between gimbal, handheld and tripod modes. A double-ended wrench is also included for easy accessory disassembly and assembly.

SmallRig Weight-Reducing Sling Handgrip Kit for DJI RS 3 / RS 3 Pro / RS 2 4383 is specially designed for DJI RS 2 / RS 3 / RS 3 Pro. You just need to attach the baseplate to the bottom of a DJI gimbal via the 1/4-20” screw, sling the shoulder strap over your right shoulder, and then extend the gimbal tripod. When you shoot, simply pick up the gimbal; in static shot, it can release almost all stress on your arms. When you don't shoot, simply let go of the gimbal and sling it against your front or against your side like a shoulder bag, largely reducing the arm's burden. The shoulder strap features QD mounts and sling swivels that enable easy accessory attachment and length adjustment. 1/4-20” and 3/8-16" threaded holes in the baseplate allow attaching tripods or other devices. The sling handgrip quickly secures the left side of a gimbal via the NATO clamp, which comes with an anti-drop design for added safety. Built-in 1/4”-20 holes and ARRI 3/8"-16 locating holes support Magic Arm 2115C, Monitor Mount 2903B; cold shoes on the top and side as well as NATO rail support Monitor Mount 3026B, microphone, image transmitter, etc. Also, the handgrip can tilt 0-180 degrees via a ratchet knob or act as a side handle to meet different needs; it is partly made of non-slip, anti-freeze silicone and aluminum alloy, ergonomically designed to hold comfortably. Overall, the delicate and compact kit works perfectly with gimbals. 1. Specially designed for DJI RS 2 / RS 3 / RS 3 Pro; the shoulder straps together with the sling handgrip makes for easier shooting.2. Reduces burden on your arms in low-angle, high-angle, long-time standing shooting.3. Highly compatible: 1/4-20″ threaded hole, ARRI 3/8"-16 locating hole, cold shoe, and QD quick-release mount.4. Adjustable angle: handgrip tilts 0-180 degrees via a ratchet knob or acts as a side handle.5. Two slide buckles for easy adjustment of strap length.6. 1/4-20” and 3/8-16" threaded holes in the baseplate for tripods or other devices. Note:1. 4118 must work with a sling handgrip.2. 4118 is incompatible with RS 3 mini or RSC 2.3. Sling handgrip load capacity: 6kg. Compatible WithDJI RS 2DJI RS 3DJI RS 3 Pro Shoulder Strap x 1Baseplate x 1Hex Spanner x 1QD Sling Mount x 1Sling Handgrip x 1 Sling Handgrip Dimensions: 199 x 68.3 x 54.5 mmShoulder Strap Dimensions:49 x 16 x 920 mm (Min.)  49 x 16 x 1500 mm (Max.)Package Dimensions: 245 x 164 x 65 mmProduct Weight: 613.0±5.0gPackage Weight: 723.0±5.0gMaterial(s): Aluminum Alloy, Stainless Steel, Polyester

DJI Care Refresh planas DJI Osmo Pocket 4P kamerai (2 metai)DJI Care Refresh – paslaugų planas, leidžiantis sugadintą įrenginį už papildomą mokestį pakeisti kitu. Jis apima ir paties naudotojo sukeltus pažeidimus. Paslaugą galima aktyvuoti ir vėliau, tačiau praėjus 30 dienų nuo įrenginio aktyvavimo DJI reikės pateikti patikros vaizdo įrašą. Bendra paslaugos trukmė su pratęsimais gali siekti 3 metus ir iki 6 keitimų. Daugiau informacijos pateikta toliau.DJI Osmo Pocket 4PDJI Osmo Pocket 4P keitimo mokestis pagal DJI Care Refresh yra 219 PLN. Vienų metų planas suteikia du keitimus, dvejų metų – keturis.**Kreipiantis tiesiogiai į gamintoją keitimo mokestis gali skirtis dėl tuo metu taikomo valiutos kurso.Garantijos pratęsimo galimybėDJI Care Refresh suteikia ir papildomų privalumų. Jei naudojate DJI Mavic 3 Pro, DJI Mavic 3 Pro Cine, DJI Mini 2 SE, DJI RS 3 Mini, DJI Mini 3, DJI Mavic 3 Classic, Osmo Mobile 6, Osmo Mobile SE, Osmo Action 3, DJI Avata, DJI RS 3, DJI RS 3 Pro, DJI Mini 3 Pro, DJI Mavic 3, DJI Mavic 3 Cine arba DJI Action 2 ir per paslaugos galiojimo laiką nė karto nepasinaudojate keitimu, garantija pratęsiama papildomiems metams.Kaip aktyvuoti DJI Care Refresh?1. Apsilankykite svetainėje https://support.dji.com/care/active.2. Aktyvuodami įveskite Care Refresh kodą, įrenginio serijos numerį, nurodytą ant gaminio, ir savo duomenis: vardą, pavardę bei el. pašto adresą.3. Paslauga bus aktyvuota ir automatiškai priskirta atitinkamam regionui. Aktyvavimo patvirtinimą gausite el. paštu.Įvyko nelaimingas atsitikimas – ką daryti?Įvykus nelaimingam atsitikimui praneškite apie pažeidimą ir išsiųskite įrenginį DJI garantinio aptarnavimo centrui, nurodydami, kad turite DJI Care Refresh. Gavę remonto sąmatą galėsite rinktis remontą arba keitimą pagal šią paslaugą. Pasirinkus keitimą reikia sumokėti taikomą mokestį, o pakaitinis įrenginys išsiunčiamas pirmenybės tvarka. Jei esate tame pačiame regione, kuriame įsigijote planą, siuntimo išlaidas padengia gamintojas. 1. Praneškite apie gedimą ir išsiųskite kamerą DJI aptarnavimo centrui Vokietijoje, nurodydami, kad turite DJI Care Refresh.2. Gavę sąmatą nuspręskite, ar rinktis remontą, ar keitimą pagal DJI Care Refresh.3. Pasirinkę DJI Care Refresh sumokėkite keitimo mokestį. Tuomet gausite kitą įrenginį arba naujas keičiamas dalis, pavyzdžiui, stabilizatorių, kamerą ar propelerius.4. Pakaitinis gaminys bus pristatytas pirmenybės tvarka, be siuntimo mokesčio.Ko neapima DJI Care Refresh?1) Pamestos įrangos ar jos dalių.2) Pavogtų arba paliktų gaminių.3) Papildomų priedų.4) Tyčinio gaminio praradimo.5) Korpuso pažeidimų, neturinčių įtakos gaminio veikimui.6) Tiesioginių ar netiesioginių nenugalimos jėgos sukeltų pažeidimų.7) Gedimų, atsiradusių pasibaigus DJI Care Refresh galiojimui.8) Papildomų mokesčių už modelio atnaujinimą ar veikimo patobulinimą.9) Gedimų dėl naudojimo instrukcijos neatitinkančių pakeitimų arba nesuderinamų akumuliatorių ir įkroviklių naudojimo.10) Gedimų dėl nepatvirtintų priedų, akumuliatorių ar programinės įrangos naudojimo.DJI Care Refresh apsaugą galima pratęsti iki 3 metų. Tam įsigykite papildomą vienų metų planą. • Vienų metų DJI Care Refresh planą galima pratęsti du kartus, įsigyjant du iš eilės einančius vienų metų planus: 1 metų + 1 metų + 1 metų planas.• Dvejų metų planą galima pratęsti vieną kartą papildomu vienų metų planu: 2 metų + 1 metų planas.Pastaba: pratęsti įsigyjant dar vieną dvejų metų planą negalima.Norint pratęsti apsaugą reikia atitikti šias sąlygas:• Turi būti įsigytas vienas iš šių variantų: DJI Care Refresh vienų metų planas; dvejų metų planas; vienų metų planas ir DJI Care Refresh+; vienų metų planas ir papildomas metinis pratęsimas. • Įsigytos paslaugos galiojimas dar nepasibaigęs arba nuo jo pabaigos praėjo ne daugiau kaip 15 dienų. *Daugiau informacijos apie DJI Care Refresh rasite šiame dokumente.

SmallRig HawkLock Quick Release Cage for Canon EOS R6 Mark II 4159B is designed to provide protection and attach accessories. It locks the camera via one 1/4"-20 screw at the bottom and one side lock adapter on both sides, with rubber pads preventing scratches. The cage maintains access to the camera button, card clot, screen, and battery door and comes with multiple accessory mounts. They include, among others, a 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole that supports Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Bottom Plate 1280 & 2458, Holder for Portable Power Banks 2336 and mini V Mount Battery Plate 2987. 1/4"-20 locating holes on both sides fit Single Rod Clamp 3598  and Magic Arm 3873, and two 1/4"-20 threaded holes in the horizontal direction on the right side ensure stable vertical shooting. 1. One-piece full cage protects the camera.2. Locks the camera via one 1/4 "-20 screw and two side lock adapters.\3. Accessory mounting points: 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole, HawkLock H18 cold shoe mount, HawkLock H21 NATO rail, QD socket, hand/shoulder strap hole, etc.4. Built-in HawkLock H21 NATO rails for quick attachment of NATO clamp accessories.5. Two 1/4"-20 threaded holes on the right side ensure stable vertical shooting.6. HawkLock H38 Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 / RS 4 / RS 4 Pro stabilizers. SmallRig HawkLock Quick Release Cage for Canon EOS R6 Mark II 4159B is designed to provide protection and attach accessories. It locks the camera via one 1/4"-20 screw at the bottom and one side lock adapter on both sides, with rubber pads preventing scratches. The cage maintains access to the camera button, card clot, screen, and battery door and comes with multiple accessory mounts. They include, among others, a 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole that supports Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Bottom Plate 1280 & 2458, Holder for Portable Power Banks 2336 and mini V Mount Battery Plate 2987. 1/4"-20 locating holes on both sides fit Single Rod Clamp 3598  and Magic Arm 3873, and two 1/4"-20 threaded holes in the horizontal direction on the right side ensure stable vertical shooting. On its top and left side are HawkLock H21 NATO rails for NATO Top Handle 3766, 4438, Monitor Mount 2906B, and Rotating NATO Side Handle 3847, 4485. The cage also features a HawkLock H18 cold shoe mount to attach microphone, LED video light, etc., strap holes for Hand Strap 3848 & 2456, as well as a QD socket, an innovative strap slot for downward hanging for extra lens protection compatible with the Quick Disconnect System for shoulder strap. Another highlight is the HawkLock H38 Arca-Swiss quick-release plate, which supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro stabilizers for a quick switch between stabilizer, handheld, and tripod modes. Besides, there is a double-head wrench for easy disassembly and assembly. Compatible With Canon EOS R6 Mark II 1 x Cage2 x Side Lock Adapter1 x User Manual Product Dimensions: 152.5 x 64 x 116.5mm Package Dimensions: 180 x 129.5 x 75mmProduct Weight: 172g ± 5gPackage Weight: 249.5g ± 5g Material(s): Aluminum Alloy

akumulators DJI Mini 3 / 3 PRO / 4 / 4 PRO dronam 270620 BWX162-2453-7.38 BWX162-3850-7.38 270619 3850mAh 7.4V Li-Polimērs

Designed to reduce arm fatigue during low-angle shooting and offers plentiful accessory mounting options. Equipped with a NATO rail for connection and features a locating pin to ensure safe and quick operation.