Dji Osmo Action 4

The DJI Care Refresh 2-Year Plan for Osmo Action 4 (EU) provides extended protection for your action camera, covering accidental damage, including water and crash incidents, with up to two replacement units over two years. The DJI Care Refresh 2-Year Plan (Osmo Action 4) EU offers comprehensive protection for your DJI Osmo Action 4 action camera. This two-year service plan ensures peace of mind by covering accidental damage, such as crashes or water exposure, and includes up to two replacement devices for a small additional fee. Ideal for adventure enthusiasts, vloggers, and content creators, it guarantees fast and reliable service with free two-way shipping and access to VIP technical support. DJI Care Refresh can also be added to a previously purchased device if it is brand new and unactivated, activated within the last 48 hours, or recently repaired at an official DJI service center within 72 hours. Key Features: Covers accidental damage: water and crash incidents Up to 2 replacement units within 2 years VIP phone and technical support Free two-way shipping for replacements Can be added to new or recently activated/repaired devices Peace of mind for adventure and filming DJI Care Refresh 2-Year Plan (Osmo Action 4) EU Digital activation code Coverage period: 24 months (2 years) Maximum replacements: 2 Device: DJI Osmo Action 4 Damage coverage: Accidental water damage, crashes Replacement type: New or equivalent-to-new Activation: Digital code provided via email

DJI Care Refresh 2-Gadu Plāns nodrošina aizsardzību pret nejaušiem bojājumiem Osmo Action 4 kamerai ar līdz 4 nomaiņām divu gadu laikā.

Freewell set of 4 ND/PL filters for DJI Osmo Action 5 Pro FW-OA5-BRG

Neewer CA013 1/4-inch suction cup mount for sports cameras (DJI Action, GoPro, Insta360)Neewer CA013 is a mount with a 6-inch vacuum pump and articulated arm, designed to work with sports cameras, mirrorless cameras and smartphones. You will successfully use it with models such as GoPro Hero 12 Black / 11 Black / 10 Black / 9 Black / 8 Black / 7 Black, GoPro Max, Insta360 X4 / X3 / Go 3 / Ace Pro, DJI Osmo Action 4 / 3 / 2, AKASO Brave 4, as well as Sony, Canon and Nikon brand devices (including DSLRs). Thanks to the vacuum system, mounting on smooth surfaces is fast and safe, and the full angle adjustment allows you to position the device accurately.High holding powerThe Neewer CA013 mount offers a load capacity of up to 5 kg when traveling (up to 80 km/h), and on a stationary surface it holds up to 40 kg horizontally and 50 kg vertically. This range allows safe use with heavier equipment even in off-road conditions and during dynamic shots from a car.Mounting on various surfacesThe suction cup works effectively on glass, metal, ceramic surfaces and smooth wooden plates. Thanks to the silicone construction of the mounting cup and the aluminum handles, the device ensures a lasting grip even in adverse weather conditions.Universal attachment points1/4" and 3/8" threads allow mounting of a variety of accessories - from sports camera mounts to ARRI adapters to boom arms or smartphones. Suitable screw adapters are also included, increasing compatibility with a variety of equipment.Free position adjustmentDual ball heads in the articulating arm allow for smooth 360° rotation and precise angle adjustment. Non-slip rubber pads stabilize the unit once it is attached, and a clamping screw allows quick locking of settings.Durability and easy cleaningConstruction made of aluminum and silicone rubber guarantees resistance to scratches, corrosion and changing weather conditions. The materials are easy to clean with water and can withstand heavy use in the field.Included: Vacuum mount with pump Articulated arm L-shaped allen wrench x2 1/4" adapter 3/8" adapter Manufacturer Neewer Model CA013 Material Aluminum alloy, silicone rubber Vertical load capacity (in motion) 5 kg Vertical load capacity (static) 50 kg Horizontal load capacity (static) 40 kg Suction cup diameter 6" / 153 mm Height 2.6" / 66 mm Weight 546 g

Set of 4 Freewell ND filters for DJI Osmo Action 5 ProThe ND8/16/32/64 Freewell filters for the DJI Osmo Action 5 are ideal for anyone who wants to achieve professional video quality even in bright conditions. Thanks to their high-quality optics, these filters reduce flare, ensure accurate colors and allow you to control shutter speed for cinematic shots. Weighing only 1.1g, the filters do not affect the balance or aerodynamics of the drone, allowing smooth flights. Installation is simple - just remove the protective layer from the magnetic ring, fit it to the lens and attach the filter, which can be easily changed without removing the ring.Included ND8 filter ND16 filter ND32 filter ND64 filter Manufacturer Freewell Model FW-OA5-STD Compatible with DJI Osmo Action 5

Augstas kvalitātes 4-pakā optisko filtru komplekts DJI Osmo Action kamerām ar neitrālo blīvumu un polarizējošām funkcijām.

About the serviceDJI Care Refresh is a service package that allows you - for a fee - to replace a damaged product with a new one. It covers damage caused even through the fault of the user. The service can be activated at any time - after 30 days from the activation of the device, it will be necessary to send DJI averification video.The total service time, taking into account extensions is 3 years,and that's as many as 6 replacements!For more information, see below.Replacement cost 1For DJI RS 4 Mini, the cost of each replacement under DJI Care Refresh is: PLN 199DJI Care Refresh (annual plan) provides two replacements.DJI Care Refresh (2-year package) provides four replacements. 1If you apply directly to the manufacturer, the replacement amount is subject to change depending on the current exchange rate.Possibility to extend the manufacturer's warranty 2If you do not use the replacement option once during the service period, as part of your reward, DJI will extend your manufacturer's warranty for an additional year. 2Applies to the following models: DJI Action 2, DJI Osmo Action 3, DJI Osmo Action 4,DJI Osmo Mobile SE, DJI Osmo Mobile 6, DJI RS 3, DJI RS 3 Pro, DJI RS 3 MiniHow to activate DJI Care Refresh?1 Go to the following website:Activate DJI Care Refresh2. during the activation process, enter the Care Refresh code, the serial number of the device and your information.2a. When the activation time has passed, you will need to send toDJI a verification video. After approval, the service should be activated within 72 hours.3.The service will be activated and automatically assigned to your device. You will receive confirmation of DJI Care Refresh activation via email.How to use the service?1. report the repair to our service:DJI-ARS Service Alternatively, you can report the defect on the website of theDJI manufacturerand send the product with a note that you have DJI Care Refresh.2.When you receive a repair quote, decide whether you want to use it or prefer a replacement under DJI Care Refresh.3. once you select DJI Care Refresh, pay for the replacement - you will then receive a new unit.4. the replacement product will be delivered to you with priority and free shipping.DJI Care Refresh service renewalThe maximum duration of the DJI Care Refresh service, including renewal, is 3 years. If you wish to do so, purchase an additional one-year plan. Renewal can only be done with the annual plan during the current plan or within 15 days of the service expiration date. We would like to inform you that based onregulations §5 points 5.6-5.7it is not possible to return or exchange electronic codes and physical cards with the security coating or seal removed.

Freewell set of 4 ND filters for DJI Osmo Action 5 Pro FW-OA5-STD