Heat Pump Water

Organic oil for men for quick and long-lasting tan. Made of pure, natural organic oils, enriched with natural vitamin E. Intensively nourishes, tightens and moisturizes the skin, leaving a silky smooth feeling. Suitable for beach and everyday use. It is a mixture of natural oils that hardens when exposed to lower temperatures, so we do not recommend choosing the delivery method through postal machines in cold weather. Tanning oil for men helps to quickly achieve a strong, chocolate tan while tanning on the beach, outside in the sun or in the solarium. Also, suitable for daily skin care or aromatic face and body massages - intensively nourishes and moisturizes the skin, leaving a silky smooth feeling, softness and firmness of the skin. Formulated with 100% natural ingredients such as coconut, jojoba, sweet almond oils and cocoa butter. Enriched with natural vitamin E. Suitable for sensitive skin.   Deep aroma of black coconut with light notes of wood and vanilla. Made in: Bulgaria Capacity: 110 ML Recommendations:   If the oil has thickened or solidified, place it in a warm place, such as one of the following ways:   p place it close to the heater ; l keep it under warm running water ; wrap the bottle in a plastic bag and briefly immerse it in a water bath   * Please note that it is not advisable to overheat the oil, as it may lose its properties and reduce the effectiveness of the ingredients.   When heating the bottle, remove the oil from the heat source as soon as it liquefies. Cocos Nucifera Oil* ( coconut oil ), Coconut Alkanes, Prunus Amygdalus Dulcis Oil* ( sweet almond oil ), Simmondsia Chinensis Seed Oil* ( jojoba oil ), Theobroma Cacao Seed Butter* ( cocoa butter ), Tocopherol ( vitamin E ), Aroma, Alpha Isomethyl Ionone**, Cinnamaldehyde**, Coumarine**, Eugenol**, Linalool**, Alpha-hexylcinnamaldehyde**. *Certified organic ingredients **Fragrance ingredients To open the bottle, you must first turn the head to the right or left to unlock the pump. Attempting to use the product without doing so will likely damage the bottle pump. Spread the oil on the skin and massage gently. You can use it immediately after bathing, then the resulting water and oil emulsion is easily absorbed into the skin and preserves its moisture.

Organic oil for quick and long-lasting tanning. Made of pure, natural organic oils, enriched with natural vitamin E. Intensively nourishes, tightens and moisturizes the skin, leaving a silky smooth feeling. Suitable for beach and everyday use. It is a mixture of natural oils that hardens when exposed to lower temperatures, so we do not recommend choosing the delivery method through postal machines in cold weather. Helps to quickly achieve a strong, chocolate tan when tanning on the beach, outside in the sun or in a solarium. Also, suitable for daily skin care or aromatic face and body massages - intensively nourishes and moisturizes the skin, leaving a silky smooth feeling, softness and firmness of the skin. Formulated with 100% natural ingredients such as coconut, jojoba, sweet almond oils and cocoa butter. Enriched with natural vitamin E. Suitable for sensitive skin. Pleasant smell of pineapple and sweet vanilla. Made in: Bulgaria Capacity: 110 ML Recommendations:   If the oil has thickened or solidified, place it in a warm place, such as one of the following ways:   p place it close to the heater ; l keep it under warm running water ; wrap the bottle in a plastic bag and briefly immerse it in a water bath   * Please note that it is not advisable to overheat the oil, as it may lose its properties and reduce the effectiveness of the ingredients.   When heating the bottle, remove the oil from the heat source as soon as it liquefies. Cocos Nucifera Oil* ( coconut oil ), Coconut Alkanes, Prunus Amygdalus Dulcis Oil* ( sweet almond oil ), Simmondsia Chinensis Seed Oil* ( jojoba oil ), Theobroma Cacao Seed Butter* ( cocoa butter ), Tocopherol ( vitamin E ), Aroma. *Certified organic ingredients. To open the bottle, you must first turn the head to the right or left to unlock the pump. Attempting to use the product without doing so will likely damage the bottle pump. Spread the oil on the skin and massage gently. You can use it immediately after bathing, then the resulting water and oil emulsion is easily absorbed into the skin and preserves its moisture.

The Endorfy Navis F360 is a piece of hardware that will chill the components of your computer. On top of that, it will handle the demands of even high-powered processors at chill (literally!). This is taken care of by a silent block pump with ceramic bearing and PWM control. Combined with three Fluctus fans and a cooler, it's a combo with which you can forget about a muddling overheated CPU. It is compatible with all popular sockets, so it will fit perfectly with almost every CPU available on the market. And thanks to its simple mounting system and pre-installed fans, you'll connect it to your PC quickly and without any help. So quiet that you can hear your thoughts The Navis F360 water cooler is one of the quietest we know of. You can even hear your virtual enemy lurking in the bushes. And your thoughts (in future versions we will try to provide you with the option to read your opponents' heads) ;) The award-winning Fluctus 120 PWM fans are responsible for the airflow through the coolers. Their blades have been profiled in such a way as to sweep the dense fins of the heatsink as accurately as possible. We have a theory that if they were enlarged sufficiently, another ice age would be unleashed on the world they are doing an exemplary job of lowering temperatures. On top of this, each is finished with a wavy edge to reduce the audibility of annoying noise (psychoacoustic optimisation of Fluctus fans is patent pending). Welcome to the dark silent side of power. A breath of fresh air (from the fans) Running advanced programmes requires a reliable cooling system. After long hours of testing and tweaking, we can say one thing Navis F360 is such a piece of hardware. You can easily play a few (several) hours of MMO on the highest settings and the temperature of your CPU remains at a safe level. This is thanks to a specially designed asymmetrical water block that collects heat energy from the CPU. We have combined it with a ceramic-bearing pump whose speed can be controlled by a PWM signal (from 1600 to 2600 rpm). In practice, this means that the pump will adapt its speed to the fans and you can finally work in silence. On top of this, the liquid in the Navis F360 is cooled by a 360-mm radiator. We have designed it especially for our proudest fan, the Fluctus. Your friends will not pass by such a combo without a squeeze of envy. More performance for a bigger case We have spent half of our lives on cooling systems and know that a bigger cooler = more performance. That's why the Navis F360 is almost 40 cm long. It's a size that will cool even the largest case. Its installation is a piece of cake. Thanks to the flexible hoses, you can easily position the cooler inside your PC. Each hose is about 42 cm long, which makes it easy to install in a large case. We tested it ;) Not exactly creepy paste Included with the Navis F360 you get a tube of efficient and easy-to-apply Pactum PT-3 thermal paste, which will easily last you several installations. You have nothing to fear, we have tested it ourselves.

DarkFlash CB360 CPU Cooler (White)The DarkFlash CB360 is a high-performance all-in-one liquid cooler that combines excellent heat dissipation with striking ARGB lighting and a modern, panoramic water block design. It features an aluminum heatsink, three pre-installed 120mm fans, and a copper base with a large contact surface, allowing it to effectively cool even the most demanding processors with a TDP of up to 300 W. In addition, the integrated ARGB lighting with synchronization support ensures the kit blends perfectly with modern gaming PCs and workstations.Panoramic water block with ARGB lightingThe cooling system features a transparent, panoramic water block with built-in ARGB lighting that creates unique lighting effects. This gives the computer a modern look and looks great in cases with glass side panels. Support for ARGB synchronization (including ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion 2.0, and ASRock Polychrome RGB) allows you to easily match the lighting to the rest of your PC components and create a cohesive visual setup.Effective CPU coolingThe CB360 model is equipped with an aluminum heatsink and a large copper base, which increases the contact surface with the CPU and improves heat conduction. The system is supported by a three-phase pump that operates at approximately 2850 RPM and runs exceptionally quietly—its noise level is only about 29 dBA. All of this creates the ideal conditions for gaming, rendering, or working with demanding applications.Quiet operation and efficient PWM fansThree integrated 120 mm fans use fluid dynamic bearings and support automatic PWM control, allowing the rotational speed to be dynamically adjusted to the CPU temperature. The range from 800 to 1,800 RPM maintains a balance between performance and quiet operation. Airflow reaches 69.81 CFM, pressure is 2.2 mmH₂O, and the maximum noise level is only 28.5 dBA. This allows you to comfortably use your computer even during long gaming sessions—without your hardware overheating and without annoying noise.Durable construction and easy installationThe model uses 12.5 mm braided tubing, which reduces liquid evaporation and increases the durability of the entire system. Pre-installed fans simplify installation and allow you to get your computer up and running faster. The cooler supports 5V 3-pin and PWM 4-pin connectors, allowing for easy connection to compatible motherboards.Wide compatibility with Intel and AMD platformsThe DarkFlash CB360 works with popular Intel and AMD processors, making it suitable for both new and upgraded computers. The cooling system supports Intel LGA 1200, 1700, and 18xx sockets, as well as AMD AM5, AM4, and AM3 sockets. You’ll have no trouble adapting it to your setup!Included Heatsink and water block x1 120 mm fan x3 User manual x1 Mounting screw set x1 Accessory kit x1 Thermal paste x1 Manufacturer DarkFlash Model CB360 Color White Cooling type Integrated AIO water cooling TDP 300 W Water block dimensions 66 × 66 × 67.7 mm Water block material Block – copper, housing – plastic Pump speed 2850 ±10% RPM Pump voltage DC 12V Pump noise level 29 ±10 dBA Heat sink material High-density aluminum Water reservoir dimensions 396 × 120 × 27 mm Hose type Braided hose Hose length 450 mm Fan dimensions 120 × 120 × 25 mm Bearing type Hydraulic Fan control PWM Fan speed 800-1800 ±10% RPM Maximum fan noise level 28.5 dBA Maximum airflow 69.81 CFM Maximum air pressure 2.2 mmH2O Fan lifespan (MTTF) Up to 30,000 hours Intel compatibility LGA 1200 / 1700 / 18xx AMD compatibility AM5 / AM4 / AM3

DarkFlash CB360 CPU Water Cooler (Black)The DarkFlash CB360 is a high-performance all-in-one water cooler that combines excellent heat dissipation with striking ARGB lighting and a modern, panoramic water block design. It features an aluminum heatsink, three pre-installed 120mm fans, and a copper base with a large contact surface, allowing it to effectively cool even the most demanding processors with a TDP of up to 300 W. In addition, the integrated ARGB lighting with synchronization support ensures the kit blends perfectly with modern gaming PCs and workstations.Panoramic water block with ARGB lightingThe cooling system features a transparent, panoramic water block with built-in ARGB lighting that creates unique lighting effects. This gives the computer a modern look and looks great in cases with glass side panels. Support for ARGB synchronization (including ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion 2.0, and ASRock Polychrome RGB) allows you to easily match the lighting to the rest of your PC components and create a cohesive visual setup.Effective CPU coolingThe CB360 model is equipped with an aluminum heatsink and a large copper base, which increases the contact surface with the CPU and improves heat conduction. The system is supported by a three-phase pump that operates at approximately 2850 RPM and runs exceptionally quietly—its noise level is only about 29 dBA. All of this creates the ideal conditions for gaming, rendering, or working with demanding applications.Quiet operation and efficient PWM fansThree integrated 120 mm fans use fluid dynamic bearings and support automatic PWM control, allowing the rotational speed to be dynamically adjusted to the CPU temperature. The range from 800 to 1,800 RPM maintains a balance between performance and quiet operation. Airflow reaches 69.81 CFM, pressure is 2.2 mmH₂O, and the maximum noise level is only 28.5 dBA. This allows you to comfortably use your computer even during long gaming sessions—without your hardware overheating and without annoying noise.Durable construction and easy installationThe model uses 12.5 mm braided tubing, which reduces fluid evaporation and increases the durability of the entire system. Pre-installed fans simplify installation and allow you to get your computer up and running faster. The cooler supports 5V 3-pin and PWM 4-pin connectors, allowing for easy connection to compatible motherboards.Wide compatibility with Intel and AMD platformsThe DarkFlash CB360 works with popular Intel and AMD processors, making it suitable for both new and upgraded computers. The cooling system supports Intel LGA 1200, 1700, and 18xx sockets, as well as AMD AM5, AM4, and AM3 sockets. You’ll have no trouble adapting it to your setup!Included Heatsink and water block x1 120 mm fan x3 User manual x1 Mounting screw set x1 Accessory set x1 Thermal paste x1 Manufacturer DarkFlash Model CB360 Color Black Cooling type Integrated AIO water cooling TDP 300 W Water block dimensions 66 × 66 × 67.7 mm Water block material Block – copper, housing – plastic Pump speed 2850 ±10% RPM Pump voltage DC 12V Pump noise level 29 ±10 dBA Heat sink material High-density aluminum Water reservoir dimensions 396 × 120 × 27 mm Cable type Braided cable Cable length 450 mm Fan size 120 × 120 × 25 mm Bearing type Hydraulic Fan control PWM Fan speed 800-1800 ±10% RPM Maximum fan noise level 28.5 dBA Maximum airflow 69.81 CFM Maximum air pressure 2.2 mmH2O Fan lifespan (MTTF) Up to 30,000 hours Intel compatibility LGA 1200 / 1700 / 18xx AMD compatibility AM5 / AM4 / AM3

Navis F240 Cool, cooler, Navis F240 ARGB Meet the illuminated air-conditioning illuminated cooling system with which you will deal with enemies, defeat dragons and win races without hitting the heat in the proc. Thank the silent block-pump with ceramic bearing and PWM control. Together with two Fluctus 120 PWM ARGB fans and a cooler, it's a package with which you can forget about blue screens on an overheated PC. When someone asks us for an efficient AIO CPU cooling system, we answer in three words: Navis F240 ARGB. It's a proven piece of hardware with cosmic ARGB backlighting that provides great cooling efficiency without the annoying whizz of fans. At its heart is a silent block-pump with ceramic bearing and PWM control. We have paired it with a 240 mm radiator with two Fluctus 120 PWM ARGB fans pre-installed. This compact kit is compatible with popular AMD and Intel sockets to fit into most standard cases, so you don't have to worry about your components being squeezed together like cosplayers queuing to enter a convention ;)

CPU liquid cooler NOX 240 MM NOX 240 mm is a high-performance CPU liquid cooler designed for gamers, PC enthusiasts, and demanding users. It ensures stable operation even under heavy CPU load, efficiently dissipates heat, and keeps your system quiet. An ideal choice if you expect both strong performance and modern design. High cooling performance Thanks to an aluminum radiator (a heat-dissipating element) and a copper water-block base, the NOX 240 mm effectively lowers CPU temperatures during gaming, rendering, or streaming. The built-in pump runs at 2550 rotations per minute (RPM), providing optimal coolant flow. 240 mm cooling standard The NOX system uses the 240 mm standard. The increased surface area enables faster heat transfer, improving CPU stability and the overall acoustic comfort of the build. The coolant tubes are 400 mm long, giving you flexible installation inside the case. 2 × 120 mm fan optimal airflow The kit includes two 120 mm fans with a speed range of 6001800 RPM (rotations per minute). This lets you match fan speed to current needsfrom quiet idle operation to maximum cooling under full load. The fan design ensures efficient airflow at a low noise level. PWM connector The NOX fans feature 4-pin PWM (Pulse Width Modulation) connectors, allowing the motherboard to control their speed automatically. As a result, the cooling system works only as hard as the CPU temperature requires, reducing noise and power consumption. The pump uses a classic 3-pin connector for easy installation and stable power. Broad compatibility fits most CPUs The NOX 240 mm liquid cooler is compatible with a wide range of Intel and AMD sockets.Supported Intel platforms: LGA 775 / 1200 / 1151 / 1150 / 1155 / 1156 / 1366 / 1700 / 1851 / 2011 / 2066Supported AMD platforms: AM3(+) / AM2(+) / FM2(+) / FM1 / AM4 / AM5This ensures easy installation in most popular configurations. TDP rating ready for demanding workloads The NOX 240 mm supports CPUs with TDP (Thermal Design Power the amount of heat the cooling system must dissipate) up to 250 W, making it a great solution for high-performance processors.Whether youre playing demanding titles, editing video, or doing creative work, NOX will keep your CPU temperatures under control.

Endorfy Navis F240 is a high-performance AIO CPU cooling system that we designed together with Synergy Cooling. At its heart is a silent block-pump with ceramic bearing and PWM control. We've paired it with a 240mm sized radiator with two Fluctus 120 PWM fans pre-installed. It's a compact kit that will fit into most standard cases. It is also compatible with popular AMD and Intel sockets. Simply put, if you like proven solutions that provide top cooling efficiency without annoying fan noise then you'll like the Navis F240 Endorphs. With this hardware you will deal with enemies, defeat dragons and win races. On the cool side. The Dark Silent Side of Power The Navis F240 cooling system is the result of a collaboration between Endorfa and Synergy Cooling and it's a combo that never disappoints. It's so quiet, you're sure to hear even a rogue creeping up behind your back when doing your next quest. The award-winning Fluctus 120 PWM fans are responsible for the airflow through the coolers. Their blades have been profiled to sweep the densely stacked heatsink fins as precisely as possible. We fondly call them Huginn and Muninn, because they glide with the speed of Odin's ravens and lower the computer's temperature. To top it all off, each is finished with a wavy edge to reduce annoying noise (a psychoacoustic optimisation of the Fluctus fans is patent-pending). Welcome to the dark quiet side of power. One of the best in its class We won't beat around the bush the cooling efficiency of the Navis F240 is one of the best in its class. You can play, talk and work for hours and your PC will respond to your every command without any fuzz or unexpected resets. That's thanks to a specially designed asymmetrical water block that collects heat energy from the processor. We have combined it with a ceramic-bearing pump whose speed can be controlled by a PWM signal (from 1600 to 2600 rpm). In practice, this means that the pump will adapt its speed to the fans and you can finally work in silence. To top it off, the liquid in the Navis F240 is cooled by a compact (240-millimetre) radiator. We have designed it especially for our proudest fan, the Fluctus. Your friends will not pass by such a combo without a squeeze of envy. Welcome to the tidy jungle! Navis F240 is a water cooler that you can mount in any position inside your PC as you like. This powerful little guy is compatible with most cases. Welcome to the tidy jungle! This is thanks to the flexible hoses. Each one is about 39 centimetres long, so you can easily mount the cooler the way you want. Not exactly creepy paste In the package with the Navis F240 you get the efficient and easy-to-apply Pactum PT-3 thermal paste, which will easily last you for several installations. You have nothing to fear, we have tested it ourselves.

Darkflash DG360 CPU Cooler (Black)The DarkFlash DG360 is an all-in-one liquid cooler that combines performance with easy installation and tidy cable management. The design features a water block with a copper base, an aluminum radiator, 400 mm IIR + EPDM tubing, and three 120 mm fans integrated into a single module. The system supports select Intel and AMD processors, and the pump, operating at approximately 600–3000 RPM, helps maintain a stable temperature even under heavy load. The whole setup is complemented by striking ARGB lighting.Water block with a copper base and lightingThe water block stands out with its striking, colorful lighting, which fits well with modern computers. The ability to rotate the head ensures that the visual effect remains consistent regardless of the component layout inside the case. The copper base effectively dissipates heat from the processor, while the plastic housing helps maintain a lightweight and aesthetically pleasing design.Stable cooling even under heavy loadThe DG360 is designed to work with high-performance Intel and AMD processors, making it ideal for gaming PCs and systems handling demanding workloads. The pump, operating at 600–3000 RPM, ensures efficient fluid circulation, and its noise level is only about 15 dBA, helping to maintain a quiet operating environment. Additionally, the high-density aluminum heatsink increases the heat dissipation surface area, helping maintain stable temperatures during long gaming sessions, rendering, or multitasking.Integrated 3-in-1 fan moduleThree fans have been integrated into a single module and factory-attached to the heatsink, simplifying installation and improving the appearance of the computer’s interior. They offer airflow of up to 81.5 CFM and static pressure of up to 2.3 mmH₂O, and feature durable hydraulic bearings with a lifespan of up to 40,000 hours. An additional advantage is their quiet operation—the maximum noise level is only about 36 dBA. Added to this is the PWM function, which automatically adjusts fan speed to CPU temperature within a range of 600 to 1800 RPM.ARGB Synchronization and Single CableThe cooler enables ARGB synchronization with the latest motherboards—it supports, among others, ASUS Aura Sync, ASRock Polychrome Sync, and RGB Fusion 2.0. Connection is via a 5V 3-pin ARGB connector. Additionally, a single cable with a 5V 3-pin ARGB and 4-pin PWM connector simplifies installation, reduces cable clutter inside the case, and helps prevent mistakes.Durable tubing and refined designThe tubing, made of IIR + EPDM, ensures good wear resistance and supports long-term, stable system operation. It is also distinguished by its distinctive braiding, which improves aesthetics and durability. The kit also includes thermal paste and mounting accessories, making it easy to prepare the cooling system for installation and achieve a clean, professional finish.Included Radiator and pump 3 x 120 mm fans User manual Set of mounting screws Accessory kit Thermal paste Manufacturer DarkFlash Model DG360 Color Black Water block dimensions 84.5 × 70 × 47.2 mm Water block material Block – copper, housing – plastic TDP 320 W Pump speed 600–3000 ±10% RPM Pump voltage DC 12 V Pump noise level 15 dBA Heat sink material High-density aluminum Water reservoir dimensions 394 × 120 × 27 mm Hoses Weaving slide hoses Cable length 400 mm Fan dimensions 120 × 120 × 25.4 mm (3 pcs.) Bearing Hydraulic Speed control PWM Fan speed 600–1800 ±10% RPM Maximum fan noise level 36 dBA Maximum airflow 81.5 CFM Maximum static pressure 2.3 mmH₂O Fan lifespan Up to 40,000 hours Intel compatibility LGA 1200 / 115x / 1700 / 18xx AMD compatibility AM5 / AM4

Endorfy Navis F280 high-performance AIO liquid cooling kit that can handle the demands of even high-powered CPUs. Get ready for top-shelf cooling efficiency without fan noise. The focal point of the Endorfa Navis F280 is a block-pump with ceramic bearing and PWM control. For this we give you two Fluctus fans in the set. Thanks to their size (each is 140 mm), they can run at lower speeds while maintaining a performance that satisfies you and your PC. On top of this, the Endorfy Navis F280 is compatible with all popular stands, giving you the possibility to install it on almost any CPU. Thanks to the simple mounting system and pre-installed fans, you will do it in minutes. Quiet, please! The Navis F280 cooling system is so quiet that you'll probably forget about it after a few minutes in front of your PC. We've designed it in such a way that you can play at thousands of FPS without getting tense that the annoying fan noise is about to come on.... Well, unless you keep a fan on your desk, but that's out of our control ;) The award-winning Fluctus 140 PWM fans are responsible for the airflow through the coolers. Their blades have been profiled in such a way as to sweep the densely stacked fins of the heatsink as precisely as possible. We have a theory that if they were enlarged sufficiently, another ice age would be unleashed on the world they are doing an exemplary job of lowering temperatures. On top of this, each is finished with a wavy edge that reduces the audibility of annoying noise (psychoacoustic optimisation of the Fluctus fans is pending patent). Cool, cooler, Navis F280 If we had to sum up the cooling efficiency of the Navis F280 in one sentence, we would say that it is one of the best in its class. After a day of putting out fires at work, you can fire up your favourite shooter and your PC will still run quietly and flawlessly. That's thanks to a specially designed asymmetrical water block that collects heat energy from the CPU. We have combined it with a ceramic-bearing pump whose speed can be controlled by a PWM signal (from 1600 to 2600 rpm). In practice, this means that the pump will adapt its speed to the fans and you can finally work in silence. On top of this, the liquid in the Navis F280 is cooled by a 280-mm radiator. We have designed it especially for our proudest fan, the Fluctus. Your friends will not pass by such a combo without a squeeze of envy. Welcome to the tidy jungle! Navis F280 is a water cooler that can be installed in any position inside your PC. Welcome to the tidy jungle! This is thanks to the flexible hoses. Each hose is about 39 cm long, so you can easily mount the cooler the way you want. Not exactly creepy paste Included with the Navis F280 you get a tube of efficient and easy-to-apply Pactum PT-3 thermal paste, which will easily last you several installations. You have nothing to fear, we have tested it ourselves.

Darkflash DN 360 computer water cooler (white)Keep your computer's CPU at the right temperature with the Darkflash DN 360 water cooler. With 3 fans of 120 mm each and a copper base, it efficiently dissipates heat while operating extremely quietly. In addition, the colorful ARGB backlighting will add an original touch to your computer, creating stunning visual effects. The product is compatible with both Intel and AMD processors.3 fans of 120 mm eachThe 3 120mm fans and quality hydraulic bearing ensure efficient CPU cooling (up to 1.6 l/min). Thanks to special anti-vibration pads, the noise level is low, only about 30 dBA. In addition, the fans support PWM function, automatically adjusting their speed (800-1800 RPM) according to the CPU temperature.Optimal coolingCopper cooling base, hydraulic bearing, efficient pump and durable tubes ensure efficient heat dissipation and extended unit life of up to 40,000 h. The heatsink's heavy-duty aluminum design ensures optimal airflow and eliminates the risk of leaks.Hassle-free installationThe cooling unit is compatible with various Intel and AMD processor models, and its installation is simple. Synchronization with the motherboard via a 3 pin 5 V connector is possible. In addition, ARGB backlighting gives the computer a modern touch - up to 16.8 million colors are available.Included water cooling Intel and AMD mounting kit set of screws DP5 thermal conductive paste Manufacturer Darkflash Model NEBULA DN360 Cooling type water Color white Number of fans 3 Fan dimensions 120 × 120 × 25 mm Bearing type hydraulic bearing Fan speed 800 ~ 1800 ± 10% rpm max. Air flow rate 61.7 CFM max. Fan noise level max. 30 dBA Air pressure 1.26 mm H2O max. Dimensions of the heat sink 397 × 120 × 27 mm Tube dimensions 12 × 450 mm Heat sink material aluminum Dimensions of water block 86 × 72 × 59 mm Pump speed 2400 ± 10% rpm Maximum noise level of the pump 30 dBA Supply voltage 12 V Service life 40 000 h Connector 3 pin Backlighting ARGB Compatibility Intel: 115X/1200/1700; AMD: AM5/AM4/AM3/AM3+/AM2/AM2+/FM2/FM1 , Darkflash DN 360 computer water cooler (white)Keep your computer's CPU at the right temperature with the Darkflash DN 360 water cooler. With 3 fans of 120 mm each and a copper base, it efficiently dissipates heat while operating extremely quietly. In addition, the colorful ARGB backlighting will add an original touch to your computer, creating stunning visual effects. The product is compatible with both Intel and AMD processors.3 fans of 120 mm eachThe 3 120mm fans and quality hydraulic bearing ensure efficient CPU cooling (up to 1.6 l/min). Thanks to special anti-vibration pads, the noise level is low, only about 30 dBA. In addition, the fans support PWM function, automatically adjusting their speed (800-1800 RPM) according to the CPU temperature.Optimal coolingCopper cooling base, hydraulic bearing, efficient pump and durable tubes ensure efficient heat dissipation and extended unit life of up to 40,000 h. The heatsink's heavy-duty aluminum design ensures optimal airflow and eliminates the risk of leaks.Hassle-free installationThe cooling unit is compatible with various Intel and AMD processor models, and its installation is simple. Synchronization with the motherboard via a 3 pin 5 V connector is possible. In addition, ARGB backlighting gives the computer a modern touch - up to 16.8 million colors are available.Included water cooling Intel and AMD mounting kit set of screws DP5 thermal conductive paste Manufacturer Darkflash Model NEBULA DN360 Cooling type water Color white Number of fans 3 Fan dimensions 120 × 120 × 25 mm Bearing type hydraulic bearing Fan speed 800 ~ 1800 ± 10% rpm max. Air flow rate 61.7 CFM max. Fan noise level max. 30 dBA Air pressure 1.26 mm H2O max. Dimensions of the heat sink 397 × 120 × 27 mm Tube dimensions 12 × 450 mm Heat sink material aluminum Dimensions of water block 86 × 72 × 59 mm Pump speed 2400 ± 10% rpm Maximum noise level of the pump 30 dBA Supply voltage 12

Darkflash DG360 CPU Cooler (White)The DarkFlash DG360 is an all-in-one liquid cooler that combines performance with easy installation and tidy cable management. The design features a water block with a copper base, an aluminum radiator, 400 mm IIR + EPDM tubing, and three 120 mm fans integrated into a single module. The system supports select Intel and AMD processors, and the pump, operating at approximately 600–3000 RPM, helps maintain a stable temperature even under heavy load. The whole setup is complemented by striking ARGB lighting.Water block with a copper base and lightingThe water block stands out with its striking, colorful lighting, which fits well with modern computers. The ability to rotate the head ensures that the visual effect remains consistent regardless of the component layout inside the case. The copper base effectively dissipates heat from the CPU, while the plastic housing helps maintain a lightweight and aesthetically pleasing design.Stable cooling even under heavy loadThe DG360 is designed to work with high-performance Intel and AMD processors, making it ideal for gaming PCs and systems handling demanding tasks. The pump, operating at 600–3000 RPM, ensures efficient fluid circulation, and its noise level is only about 15 dBA, helping to maintain a quiet system. Additionally, the high-density aluminum heatsink increases the heat dissipation surface area, helping maintain stable temperatures during long gaming sessions, rendering, or multitasking.Integrated 3-in-1 fan moduleThree fans have been integrated into a single module and factory-attached to the heatsink, simplifying installation and improving the appearance of the computer’s interior. They offer airflow of up to 81.5 CFM and static pressure of up to 2.3 mmH₂O, and they also feature durable hydraulic bearings and boast a lifespan of up to 40,000 hours. An additional advantage is their quiet operation—the maximum noise level is only about 36 dBA. Added to this is the PWM function, which automatically adjusts fan speed to CPU temperature within a range of 600 to 1800 RPM.ARGB Synchronization and Single CableThe cooler enables ARGB synchronization with the latest motherboards—it supports, among others, ASUS Aura Sync, ASRock Polychrome Sync, and RGB Fusion 2.0. Connection is via a 5V 3-pin ARGB connector. Additionally, a single cable with a 5V 3-pin ARGB and 4-pin PWM connector simplifies installation, reduces cable clutter inside the case, and helps prevent mistakes.Durable tubing and refined designThe tubing, made of IIR + EPDM, ensures good wear resistance and supports long-term, stable system operation. It is also distinguished by its distinctive braiding, which improves aesthetics and durability. The kit also includes thermal paste and mounting accessories, making it easy to prepare the cooling system for installation and achieve a clean, professional finish.Included Radiator and pump 3 x 120 mm fans User manual Set of mounting screws Accessory kit Thermal paste Manufacturer DarkFlash Model DG360 Color White Water block dimensions 84.5 × 70 × 47.2 mm Water block material Block – copper, housing – plastic TDP 320 W Pump speed 600–3000 ±10% RPM Pump voltage DC 12 V Pump noise level 15 dBA Heat sink material High-density aluminum Water reservoir dimensions 394 × 120 × 27 mm Hoses Weaving slide hoses Cable length 400 mm Fan dimensions 120 × 120 × 25.4 mm (3 pcs.) Bearing Hydraulic Speed control PWM Fan speed 600–1800 ±10% RPM Maximum fan noise level 36 dBA Maximum airflow 81.5 CFM Maximum static pressure 2.3 mmH₂O Fan lifespan Up to 40,000 hours Intel compatibility LGA 1200 / 115x / 1700 / 18xx AMD compatibility AM5 / AM4

Darkflash DV240S CPU water cooling (white)Darkflash DV240S cooling is a combination of advanced technology, outstanding performance and striking style, created for the most demanding users. Compatibility with Intel and AMD platforms and the ability to install stylish ARGB backlighting make it an ideal choice for any gamer. Equipped with an easy-to-read square IPS LCD screen, it provides realistic images and easy access to key information. Thanks to its robust aluminum radiator and powerful PWM fans, it offers excellent thermal efficiency, even during intense gameplay. Discover the comfort of quiet operation and impressive durability with Darkflash DV240S water cooling!Clear LCD displayThe cooler is equipped with an impressive IPS LCD screen with a resolution of 320 x 320 pixels, distinguished by its square form factor. Unlike traditional round screens, this model offers a more natural, aesthetically pleasing presentation of data, blending harmoniously with the modernistic look of gaming PCs. The IPS panel guarantees realistic color reproduction and excellent readability from any angle. With the Darkflash DV240S you gain clear and convenient access to the most important information about your hardware.Copper block - performance at the highest levelThe key element of the DV240S is a water block made of pure copper, providing excellent thermal conductivity. Thanks to it, heat is effectively removed from the surface of the processor, resulting in significantly lower operating temperatures and greater system stability even during intense gaming sessions. This is a reliable solution for every gamer!Powerful heatsink for better performanceThe large 240-millimeter heatsink made of high-quality aluminum ensures efficient heat dissipation, which is crucial especially when overclocking (overclocking) the CPU. Its robust design and large heat dissipation area effectively supports the entire system in maintaining optimal operating temperature, giving you more space for comfortable overclocking.High performance and quiet operationDarkflash DV240S cooling combines outstanding performance with extremely quiet operation. A set of two 120 × 120 × 25 mm fans provides efficient airflow with minimal noise. The fans generate a pressure of 1.85 mm-H2O and an airflow of 70.62 CFM with minimal noise, allowing you to focus on work or entertainment without unnecessary distractions.Perfect design for demanding gamersThe DV240S cooling system features a 2,700 RPM (±10%) pump with high operating culture and low power consumption (maximum 7.20 watts). The well-thought-out design, based on a 240 mm aluminum heatsink, guarantees comfortable use, durability and reliability. In addition, an integrated voltage start system (from 6V) ensures instant readiness for operation.Compatibility with leading platformsThanks to its wide compatibility, the DV240S supports many motherboard models, additionally working with RGB LED Sync technology. This makes installation of the cooler extremely simple, and the user gains the ability to personalize the lighting effects as desired. In addition, the cooling is fully compatible with popular Intel and AMD processor platforms, guaranteeing versatility and wide application in various hardware configurations.Included ARGB PWM 120mm fan x2 fan mounting screws x8 heatsink mounting screws x8 USB-C to USB 2.0 cable PWM hub fiber board user manual Manufacturer Darkflash Model DV 240S Dimensions of water block 73.1 × 73.1 × 72.4 mm Dimensions of the heatsink 292 × 120 × 27 mm Cable length 440 mm Rated voltage of the pump DC 12 V Pump starting voltage ≥6 V Current consumption of the pump 0,6 A Power consumption of the pump 7.20 W (max.) Dimensions of the fans 120 × 120 × 25 mm Rated voltage of the fans 12 V Starting voltage of the fans: ≥6 V Fan speed 800-1800 RPM ±10% Rated current of fans 0,65 A Noise level of fans 30 dBa ±10% Air flow rate 64.05 CFM ±10% Air pressure 1.85 ±10% mm-H₂O Power consumption 7.20 W (maximum) Color White

Darkflash Computer Radiator DN-D240 WHITEDarkflash DN-D240 is a high-performance 240mm water cooler that ensures stable CPU operation at low temperatures. It features a copper water block and an aluminum heatsink to efficiently dissipate heat, which is essential when the system is heavily loaded. Dual 120mm fans with hydraulic bearings, PWM control and ARGB backlighting guarantee optimal airflow and quiet operation. The LCD display allows you to monitor CPU and RAM temperatures, and IIR+EPDM tubes ensure high temperature resistance and design durability.Compatibility with Intel and AMD processorsThe DN-D240 provides broad compatibility with Intel (115x, 1200, 1700) and AMD (AM3, AM4, AM5) processor sockets, making it suitable for both older and latest configurations. The cooling's versatility makes it an investment for many years, regardless of future computer upgrades.LCD displayThe water block features a 2.1-inch LCD display, offering 480x480 px resolution and 16.7 million colors. It provides information about the temperature of the processor (CPU), RAM and pump speed, allowing you to monitor the parameters directly on the cooler. This makes it easy for you to adjust the system to your needs.Efficient and quiet operationEquipped with a three-stage motor, the pump achieves a coolant flow rate of 1.6 l/min, ensuring efficient heat dissipation with minimal noise. As a result, you can enjoy top cooling performance without unnecessary noise.Efficient heat dissipationThe water block is made of copper, which guarantees excellent thermal conductivity and speeds up the process of cooling the processor. Precise copper processing not only ensures cooling efficiency, but also greater durability and stable operation, resulting in longer component life.Dual fans with ARGBThe Darkflash DN-D240 cooling features two high-performance 120 mm fans with PWM function, which automatically adjust their speed from 800 to 1,800 RPM depending on the CPU load. The fans use hydraulic bearings, extending their life span to 40,000 hours and providing quiet operation with a maximum airflow of 61.7 CFM. ARGB backlighting allows you to synchronize colors and visual effects with other components.Robust designThe heatsink is made of high-quality aluminum, which ensures efficient heat dissipation and is also resistant to damage. IIR+EPDM tubes are characterized by high flexibility and resistance to high temperatures and pressure, which contributes to the long life and reliability of the cooling even under heavy use.Control softwareThe Darkflash product works with dedicated software that allows you to fully control cooling settings and monitor system performance. Thanks to the intuitive interface, you can adjust fan speeds and monitor the temperature of the CPU and other components.Included: Darkflash DN-D240 water cooling (includes heatsink, water block and pump) 120mm fan with ARGB x2 Mounting plate Intel bracket AMD bracket Screws for heatsink x8 AMD spacers x4 Mounting screws x4 Intel spacers 17xx x4 Intel spacers 115x/1200 x4 DP5 thermal paste Thermal paste applicator Manufacturer Darkflash Model DN-D240 Cooling type Water Compatibility with AMD processors AM5 / AM4 / AM3 Compatibility with Intel processors 115x / 1200 / 1700 Heatsink size 275 x 120 x 27 mm Heat sink material Aluminum Number of fans 2 RPM control PWM Speed 800 - 1800 RPM ±10% Bearing type Hydraulic Fan size 120 x 120 x 25 mm Fan diameter 120 mm Total number of fans 2 Pump connector 4-pin PWM Backlighting ARGB Backlight connector 3-pin ARGB Supply voltage 12V Fan backlighting ARGB MTBF lifetime 40 000 h Additional information LCD display with 480x480 px resolution, 3-stage pump motor, IIR+EPDM tubes Height 59 mm Width 80.3 mm Depth 72 mm Included accessories Mounting plate, Intel bracket, AMD bracket, 8x heatsink screw, 4c AMD spacers, 4x mounting screw, 4x Intel 17xx spacers, 4x Intel 115x/1200 spacers, DP5 thermal paste, thermal paste applicator

Darkflash Computer Radiator DN-D240 BLACKDarkflash DN-D240 is a high-performance 240mm water cooler that ensures stable CPU operation at low temperatures. It features a copper water block and an aluminum heatsink to efficiently dissipate heat, which is essential when the system is heavily loaded. Dual 120mm fans with hydraulic bearings, PWM control and ARGB backlighting guarantee optimal airflow and quiet operation. The LCD display allows you to monitor CPU and RAM temperatures, and IIR+EPDM tubes ensure high temperature resistance and design durability.Compatibility with Intel and AMD processorsThe DN-D240 provides broad compatibility with Intel (115x, 1200, 1700) and AMD (AM3, AM4, AM5) processor sockets, making it suitable for both older and latest configurations. The cooling's versatility makes it an investment for many years, regardless of future computer upgrades.LCD displayThe water block features a 2.1-inch LCD display, offering 480x480 px resolution and 16.7 million colors. It provides information about the temperature of the processor (CPU), RAM and pump speed, allowing you to monitor the parameters directly on the cooler. This makes it easy for you to adjust the system to your needs.Efficient and quiet operationEquipped with a three-stage motor, the pump achieves a coolant flow rate of 1.6 l/min, ensuring efficient heat dissipation with minimal noise. As a result, you can enjoy top cooling performance without unnecessary noise.Efficient heat dissipationThe water block is made of copper, which guarantees excellent thermal conductivity and speeds up the process of cooling the processor. Precise copper processing not only ensures cooling efficiency, but also greater durability and stable operation, resulting in longer component life.Dual fans with ARGBThe Darkflash DN-D240 cooling features two high-performance 120 mm fans with PWM function, which automatically adjust their speed from 800 to 1,800 RPM depending on the CPU load. The fans use hydraulic bearings, extending their life span to 40,000 hours and providing quiet operation with a maximum airflow of 61.7 CFM. ARGB backlighting allows you to synchronize colors and visual effects with other components.Robust designThe heatsink is made of high-quality aluminum, which ensures efficient heat dissipation and is also resistant to damage. IIR+EPDM tubes are characterized by high flexibility and resistance to high temperatures and pressure, which contributes to the long life and reliability of the cooling even under heavy use.Control softwareThe Darkflash product works with dedicated software that allows you to fully control cooling settings and monitor system performance. Thanks to the intuitive interface, you can adjust fan speeds and monitor the temperature of the CPU and other components.Included: Darkflash DN-D240 water cooling (includes heatsink, water block and pump) 120mm fan with ARGB x2 Mounting plate Intel bracket AMD bracket Screws for heatsink x8 AMD spacers x4 Mounting screws x4 Intel spacers 17xx x4 Intel spacers 115x/1200 x4 DP5 thermal paste Thermal paste applicator Manufacturer Darkflash Model DN-D240 Cooling type Water Compatibility with AMD processors AM5 / AM4 / AM3 Compatibility with Intel processors 115x / 1200 / 1700 Heatsink size 275 x 120 x 27 mm Heat sink material Aluminum Number of fans 2 RPM control PWM Speed 800 - 1800 RPM ±10% Bearing type Hydraulic Fan size 120 x 120 x 25 mm Fan diameter 120 mm Total number of fans 2 Pump connector 4-pin PWM Backlighting ARGB Backlight connector 3-pin ARGB Supply voltage 12V Fan backlighting ARGB MTBF lifetime 40 000 h Additional information LCD display with 480x480 px resolution, 3-stage pump motor, IIR+EPDM tubes Height 59 mm Width 80.3 mm Depth 72 mm Included accessories Mounting plate, Intel bracket, AMD bracket, 8x heatsink screw, 4c AMD spacers, 4x mounting screw, 4x Intel 17xx spacers, 4x Intel 115x/1200 spacers, DP5 thermal paste, thermal paste applicator

Arctic Liquid Freezer III Pro 240 with A-RGB is a wide compatibility CPU cooler. Compatible with Intel Alder Lake and Raptor Lake LGA1700 processors and the new socket LGA1851 of Arrow Lake, as well as AMD AM5 and AM4.  Features:  The Pro version uses the new P12 Pro fans with a 7-blade design, which provide higher airflow and static pressure for improved cooling efficiency, especially at high loads.  The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.  The Liquid Freezer III Pro is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.  Two connection cables provide two control options: this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting. Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.  ARCTIC's new A-RGB fans allow for perfectly matched, multi-color lighting effects. With the help of the advanced A-RGB technology and customizable LEDs, you can design your system with your very own look.  Note: Some motherboards are incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. You can check compatibility here: https://support.arctic.de/lf3-compatibility.  Arctic relies on the P12 Pro fans for better results: Higher static pressure increases cooling efficiency. Extended RPM range. More performance at any speed. Longer service life. PWM for synchronous fan control. High quality bearing. A-RGB lighting effects.  Specifications:  Pump speed: 800 - 2800 RPM. Pump voltage/ current: 12V DC/ 0.35A. Plate material: copper. Tube length: 450mm. Tube diameter: outer 12.4 mm, inner 6.0 mm. VRM fan speed: 400-2500 RPM. VRM voltage/ current: 12V DC/ 0.05A. Thermal paste: MX-6 (0.8g). Fan: 2x P12 Pro. Fan speed: 600-3000 RPM. Air flow: 77 CFM / 131 m³/h. Static pressure: 6.9 mm H2O. Connector: 4-Pin PWM. Bearing: Fluid dynamic bearing. Fan voltage/ current: 12V DC/ 0.33A. Dimensions: 277x120x38mm. Weight: 1675g. LED: 12x A-RGB Gen2 Leds. RGB voltage/ current: 5V DC/ 0.40A. Color: white body, optional lighting.  Compatibility:  AMD AM4. AMD AM5. Intel LGA1851. Intel LGA1700. Intel 1700.  Warranty: 6 years. 

Arctic Liquid Freezer III Pro 240 with A-RGB is a wide compatibility CPU cooler. Compatible with Intel Alder Lake and Raptor Lake LGA1700 processors and the new socket LGA1851 of Arrow Lake, as well as AMD AM5 and AM4.  Features: The Pro version uses the new P12 Pro fans with a 7-blade design, which provide higher airflow and static pressure for improved cooling efficiency, especially at high loads.The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.The Liquid Freezer III Pro is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.Two connection cables provide two control options: this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting. Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.ARCTIC's new A-RGB fans allow for perfectly matched, multi-color lighting effects. With the help of the advanced A-RGB technology and customizable LEDs, you can design your system with your very own look. Note: Some motherboards are incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. You can check compatibility here: https://support.arctic.de/lf3-compatibility. Arctic relies on the P12 Pro fans for better results:Higher static pressure increases cooling efficiency.Extended RPM range.More performance at any speed.Longer service life.PWM for synchronous fan control.High quality bearing.A-RGB lighting effects.  Specifications: Pump speed: 800 - 2800 RPM.Pump voltage/ current: 12V DC/ 0.35A.Plate material: copper.Tube length: 450mm.Tube diameter: outer 12.4 mm, inner 6.0 mm.VRM fan speed: 400-2500 RPM.VRM voltage/ current: 12V DC/ 0.05A.Thermal paste: MX-6 (0.8g).Fan: 2x P12 Pro.Fan speed: 600-3000 RPM.Air flow: 77 CFM / 131 m³/h.Static pressure: 6.9 mm H2O.Connector: 4-Pin PWM.Bearing: Fluid dynamic bearing.Fan voltage/ current: 12V DC/ 0.33A.Dimensions: 277x120x38mm.Weight: 1675g.LED: 12x A-RGB Gen2 Leds.RGB voltage/ current: 5V DC/ 0.40A.Color: black body, optional lighting.  Compatibility: AMD AM4.AMD AM5.Intel LGA1851.Intel LGA1700.Intel 1700.  Warranty: 6 years.

Darkflash Computer Radiator DN-D360 WHITEThe Darkflash DN-D360 is a powerful 360mm water cooler that ensures stable CPU operation at low temperatures. It features a copper water block and an aluminum heatsink to efficiently dissipate heat, which is essential when the system is heavily loaded. Three 120mm fans with hydraulic bearings, PWM control and ARGB backlighting guarantee optimal airflow and quiet operation. An LCD display allows you to monitor CPU and RAM temperatures, while IIR+EPDM tubes ensure high temperature resistance and design durability.Compatibility with Intel and AMD processorsThe DN-D360 provides broad compatibility with Intel (115x, 1200, 1700) and AMD (AM3, AM4, AM5) processor sockets, making it suitable for both older and latest configurations. The cooling's versatility makes it an investment for many years, regardless of future computer upgrades.LCD display and control softwareThe water block features a 2.1-inch LCD display, offering 480x480 px resolution and 16.7 million colors. It provides information about the temperature of the processor (CPU), RAM and pump speed, allowing you to monitor the parameters directly on the cooling. This makes it easy for you to adjust the system to your needs. The Darkflash product also works with dedicated software, which allows you to fully control cooling settings and monitor system performance. Thanks to the intuitive interface, you can adjust the speed of the fans and monitor the temperature of the CPU and other components.Efficient and quiet operationEquipped with a three-stage motor, the pump achieves a cooling liquid flow rate of 1.6 l/min, ensuring efficient heat dissipation with minimal noise. As a result, you can enjoy top cooling performance without unnecessary noise.Efficient heat dissipationThe water block is made of copper, which guarantees excellent thermal conductivity and speeds up the process of cooling the processor. Precise copper processing not only ensures cooling efficiency, but also greater durability and stable operation, resulting in longer component life.Three fans with ARGBThe Darkflash DN-D360 cooling features three high-performance 120mm fans with PWM function, which automatically adjust their speed from 800 to 1,800 RPM depending on the CPU load. The fans use hydraulic bearings, extending their lifespan to 40,000 hours and providing quiet operation with a maximum airflow of 61.7 CFM. ARGB backlighting allows you to synchronize colors and visual effects with other components.Robust designThe heatsink is made of high-quality aluminum, which ensures efficient heat dissipation and is also resistant to damage. IIR+EPDM tubes are characterized by high flexibility and resistance to high temperatures and pressure, which contributes to the long life and reliability of the cooling even under heavy use.Included: Darkflash DN-D360 water cooling (includes heatsink, water block and pump) 120mm fan with ARGB x3 Mounting plate Intel bracket AMD bracket Screws for heatsink x12 AMD spacers x4 Mounting screws x4 Intel spacers 17xx x4 Intel spacers 115x/1200 x4 DP5 thermal paste Thermal paste applicator Manufacturer Darkflash Model DN-D360 Cooling type Water Compatibility with AMD processors AM5 / AM4 / AM3 Compatibility with Intel processors 115x / 1200 / 1700 Heatsink size 397 x 120 x 27 mm Heat sink material Aluminum Number of fans 3 RPM control PWM Speed 800 - 1800 RPM ±10% Bearing type Hydraulic Fan size 120 x 120 x 25 mm Fan diameter 120 mm Total number of fans 3 Pump connector 4-pin PWM Backlighting ARGB Backlight connector 3-pin ARGB Supply voltage 12V Fan backlighting ARGB MTBF lifetime 40 000 h Additional information LCD display with 480x480 px resolution, 3-stage pump motor, IIR+EPDM tubes Height 59 mm Width 86 mm Depth 72 mm Included accessories Mounting plate, Intel bracket, AMD bracket, 12x heatsink screw, 4c AMD spacers, 4x mounting screw, 4x Intel 17xx spacers, 4x Intel 115x/1200 spacers, DP5 thermal paste, thermal paste applicator

Darkflash Computer Radiator DN-D360 BLACKThe Darkflash DN-D360 is a powerful 360mm water cooler that ensures stable CPU operation at low temperatures. It features a copper water block and an aluminum heatsink to efficiently dissipate heat, which is essential when the system is heavily loaded. Three 120mm fans with hydraulic bearings, PWM control and ARGB backlighting guarantee optimal airflow and quiet operation. An LCD display allows you to monitor CPU and RAM temperatures, while IIR+EPDM tubes ensure high temperature resistance and design durability.Compatibility with Intel and AMD processorsThe DN-D360 provides broad compatibility with Intel (115x, 1200, 1700) and AMD (AM3, AM4, AM5) processor sockets, making it suitable for both older and latest configurations. The cooling's versatility makes it an investment for many years, regardless of future computer upgrades.LCD display and control softwareThe water block features a 2.1-inch LCD display, offering 480x480 px resolution and 16.7 million colors. It provides information about the temperature of the processor (CPU), RAM and pump speed, allowing you to monitor the parameters directly on the cooling. This makes it easy for you to adjust the system to your needs. The Darkflash product also works with dedicated software, which allows you to fully control cooling settings and monitor system performance. Thanks to the intuitive interface, you can adjust the speed of the fans and monitor the temperature of the CPU and other components.Efficient and quiet operationEquipped with a three-stage motor, the pump achieves a cooling liquid flow rate of 1.6 l/min, ensuring efficient heat dissipation with minimal noise. As a result, you can enjoy top cooling performance without unnecessary noise.Efficient heat dissipationThe water block is made of copper, which guarantees excellent thermal conductivity and speeds up the process of cooling the processor. Precise copper processing not only ensures cooling efficiency, but also greater durability and stable operation, resulting in longer component life.Three fans with ARGBThe Darkflash DN-D360 cooling features three high-performance 120mm fans with PWM function, which automatically adjust their speed from 800 to 1,800 RPM depending on the CPU load. The fans use hydraulic bearings, extending their lifespan to 40,000 hours and providing quiet operation with a maximum airflow of 61.7 CFM. ARGB backlighting allows you to synchronize colors and visual effects with other components.Robust designThe heatsink is made of high-quality aluminum, which ensures efficient heat dissipation and is also resistant to damage. IIR+EPDM tubes are characterized by high flexibility and resistance to high temperatures and pressure, which contributes to the long life and reliability of the cooling even under heavy use.Included: Darkflash DN-D360 water cooling (includes heatsink, water block and pump) 120mm fan with ARGB x3 Mounting plate Intel bracket AMD bracket Screws for heatsink x12 AMD spacers x4 Mounting screws x4 Intel spacers 17xx x4 Intel spacers 115x/1200 x4 DP5 thermal paste Thermal paste applicator Manufacturer Darkflash Model DN-D360 Cooling type Water Compatibility with AMD processors AM5 / AM4 / AM3 Compatibility with Intel processors 115x / 1200 / 1700 Heatsink size 397 x 120 x 27 mm Heat sink material Aluminum Number of fans 3 RPM control PWM Speed 800 - 1800 RPM ±10% Bearing type Hydraulic Fan size 120 x 120 x 25 mm Fan diameter 120 mm Total number of fans 3 Pump connector 4-pin PWM Backlighting ARGB Backlight connector 3-pin ARGB Supply voltage 12V Fan backlighting ARGB MTBF lifetime 40 000 h Additional information LCD display with 480x480 px resolution, 3-stage pump motor, IIR+EPDM tubes Height 59 mm Width 86 mm Depth 72 mm Included accessories Mounting plate, Intel bracket, AMD bracket, 12x heatsink screw, 4c AMD spacers, 4x mounting screw, 4x Intel 17xx spacers, 4x Intel 115x/1200 spacers, DP5 thermal paste, thermal paste applicator