Mac Air 15

Maono PD300X microphoneThe Maono PD300X is a dynamic microphone designed for streamers, creators and gamers who want studio quality with ease of use. It offers dual USB-C and XLR outputs, allowing you to switch freely between your computer, audio interface and smartphone. With 192 kHz / 24 bit sampling, the unit captures sound at the highest resolution - as much as 5 times better than standard CD quality. A broadcast-grade dynamic capsule and built-in DACs guarantee natural sound and deep, clear tone. A metal chassis adds to the robustness of the design, and the whole is complemented by dedicated Maono Link software, which allows you to control the sound on the fly.Two ports and lag-free monitoringThe Maono PD300X microphone features a USB-C and XLR port for flexibility in configuration - the device works seamlessly with both computers and professional equipment. In addition, a 3.5mm headphone output with 0-delay monitoring allows you to control your voice live without audio shifts.5-layer noise protectionThe 5-layer noise cancellation system effectively reduces the impact of ambient sounds. Side-noise isolation, foam flocked filter, EMI shielding, metal anti-shock mount and Maono Link software noise gate all work together to provide a clear and crisp signal. The software achieves noise reduction of up to 30 dB, minimizing as much as 99% of constant sounds such as keyboard clicks, mouse clicks and air conditioning noise.Full control with Maono LinkMaono Link software allows precise control of microphone settings in real time. Features such as parametric EQ, compression, limiter, monitoring mixing, and microphone and headphone volume control are available. You can also choose from 4 modes - Podcast, Gaming, Recording and Streaming. With these, you can tailor the microphone's performance to your specific application with just one click. The 3-in-1 dial and mute button further simplify operation without having to reach for the computer.Convenience of use and versatility of applicationsThe body of the microphone is made of metal, which increases its resistance to damage. The built-in anti-shock mount suppresses desk vibrations from 5 to 50 Hz, and the flocked wind shield effectively eliminates explosive voices, ensuring the clarity of the recording. The Maono PD300X will adapt to your needs and allow you to focus solely on your content, whether you're working on a podcast, recording singing, playing online games or hosting a live broadcast.Included: Microphone 5/8" to 3/8" adapter 2-in-1 USB-A and USB-C to USB-C cable User manual Manufacturer Maono Model PD300X Type Dynamic Directional characteristic Cardioid Connectivity XLR AND USB-C Bit depth/sampling frequency 192kHz/24bit Frequency response 40Hz-16kHz Adjustable gain range 0 to +42dB Sensitivity XLR: -52dBV/Pa; USB: -10.5dBFS/Pa (max). Max SPL >130dB SPL Compatible operating system Windows 10, Mac OS 10.15, iOS 15 or later

Creality Falcon A1 10W Laser Engraving MachineCreality Falcon A1 is an advanced 10W laser engraving machine that guarantees high quality cutting. Thanks to its integrated camera and intelligent material recognition, using it will not be a problem for you. The Falcon A1 offers a workspace of 305 × 381 mm and a maximum working speed of up to 600 mm/s . What's more, it works with a wide range of materials - from wood and acrylic, to glass and leather, to metal or jewelry.Ready to work without complicated setupThe Creality Falcon A1 comes pre-assembled and calibrated, saving up to 95% of the time needed to get the device ready for use. This is a huge convenience, especially for novice users or those who want to start working immediately after unpacking. Everything works on a plug & play basis - just plug in the power, insert the material and start engraving.Precision camera and intelligent material recognitionThe device is equipped with a full-range HD camera that gives an accurate view of the entire work area. The camera is calibrated at the factory, making material positioning and project preparation extremely easy. In addition, it automatically recognizes materials using a QR code system and independently selects the optimal laser operation settings, eliminating the need for manual configuration.10W power and one-step cuttingThanks to its dual laser beam technology, the Falcon A1 can cut as much as 9.6 mm of acrylic or 6 mm of wood in one go. This not only saves time, but also guarantees precise cutting without the need for repetition. The laser's precise spot (0.06×0.08 mm) makes it possible to make highly detailed engravings - ideal for both personalizing items and creating artistic designs.Fast and smooth operation thanks to the CoreXY systemThe high speed of operation (up to 600 mm/s) is made possible by the CoreXY motion mechanism. This system is based on two motors that ensure smooth and stable head movement, which translates into speed without sacrificing precision.Various application possibilitiesFalcon A1 can handle a variety of materials: wood, acrylic, glass, leather, metal, fabric, plastic or jewelry. As a result, it can be used for personalizing objects, creating decorations, engraving on cylindrical surfaces (with the help of an additional rotary kit), as well as for precision cutting.Additional accessories for even more convenienceYou can upgrade the Falcon A1 with a rotary kit that allows you to engrave cylindrical objects - such as glasses, bottles or cups. There's also a HEPA-filtered air purifier that removes 99.97% of pollutants, improving the comfort of working in closed rooms. Creality also offers a wide range of proprietary materials, tailored for compatibility and engraving quality.Full compatibility and intuitive operationFalcon A1 works with the popular LightBurn, LaserGRBL and Falcon Design Space software and runs under both Windows and macOS. It supports files in jpg, png, bmp, svg, dxf and many other formats, allowing you to work seamlessly with a variety of graphic designs.Included Laser engraving machine Tube Clamp Air Assist module Silicone tube Power supply Lime plywood (300×300×3 mm) + QR card for materials Test calibration card Cable for connecting the rotating set Multi-level focusing block USB-A to USB-C cable Anti-static brush Allen wrench User manual Mounting tools (M1.5 / M2 / M2.5 / M3 allen keys, tweezers, dust-free cloth, protective lens, adapter from USB-A to USB-C, safety keys x2) Manufacturer Creality Model Falcon A1 Laser spot 0.06 × 0.08 mm Power max. 120 W Laser wavelength 455 ±15 nm Optical power 10 W Laser class Class 1 (FDA) Device dimensions 567 × 468 × 196 mm Engraving software LightBurn, LaserGRBL, Falcon Design Space Weight of the device 15.5 kg Operating system Windows / macOS Input voltage 100-240 V, 50-60 Hz Supported file formats jpeg, jpg, png, bmp, svg, dxf, etc. Output voltage DC 24V/5.0A Supported materials Cardboard, wood, bamboo, rubber, leather, fabric, acrylic,