Mac OS 1

The slim aluminium USB-C 5Gbps AXAGON HUE-STC ALU STRIP hub easily and quickly connects up to four USB devices simultaneously to a laptop, computer, or phone. You connect your laptop to the hub via a 12 cm long USB-C cable. The USB hub offers four USB outputs  one USB-A 5Gbps, ideal for fast connection of external drives or flash drives. Two standard USB-A 480Mbps outputs are sufficient for reliable connection of a mouse, keyboard, or printer. The fourth USB-C 480Mbps data connector allows the connection of most mobile phones and other devices with a common transfer rate. The slim aluminum body not only looks great, but also provides mechanical durability and passive cooling. The USB-C hub is an ideal accessory for laptops with a limited number of USB-A connectors, allowing you to continue using your existing peripherals without need to purchase new ones. Plug & Play and Hot Plug features ensure easy connection without complicated installation and allow convenient connecting and disconnecting of devices while the computer is running. The hub can also handle permanent connection of several external drives. The hub can easily handle connection to phones and tablets with a USB-C connector. For example, you can connect a flash drive, external drive, keyboard, or mouse to your phone. Input (connection to computer, tablet or phone): USB 5Gbps (USB 3.2 Gen 1), connector USB-C male. Compatible with USB 480Mbps, USB 10Gbps, USB 20Gbps, USB 40Gbps, Thunderbolt 3/4/5. USB outputs: 1× USB 5Gbps port, USB-A female connector. 2× USB 480Mbps port, USB-A female connector. 1× USB 480Mbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) from the hub's USB-A and USB-C ports. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. Power supply via USB bus - USB bus power. The high-quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions: 88 × 17 × 9 mm (W × D × H). Weight: 22 g (incl. cable). USB-C cable 12 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10/11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: USB-C hub with fixed 12 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.

The slim aluminium USB-C 5Gbps AXAGON HUE-STA ALU STRIP hub easily and quickly connects up to four USB devices simultaneously to a laptop or computer. You connect your laptop to the hub via a 12 cm long USB-A cable. The USB hub offers four USB outputs  one USB-A 5Gbps, ideal for fast connection of external drives or flash drives. Two standard USB-A 480Mbps outputs are sufficient for reliable connection of a mouse, keyboard, or printer. The fourth USB-C 480Mbps data connector allows the connection of most mobile phones and other devices with a common transfer rate. The slim aluminum body not only looks great, but also provides mechanical durability and passive cooling. The USB-A hub is an ideal accessory for laptops with a limited number of USB-A connectors, allowing you to continue using your existing peripherals without needing to purchase new ones. Plug & Play and Hot Plug features ensure easy connection without complicated installation and allow convenient connecting and disconnecting of devices while the computer is running. The hub can also handle permanent connection of several external drives. Input (connection to computer or tablet): USB 5Gbps (USB 3.2 Gen 1), connector USB-A male. Compatible with USB 480Mbps, USB 10Gbps, USB 20Gbps, USB 40Gbps, Thunderbolt 3/4/5. USB outputs: 1× USB 5Gbps port, USB-A female connector. 2× USB 480Mbps port, USB-A female connector. 1× USB 480Mbps port, USB-C female connector. USB-A hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) from the hub's USB-A and USB-C ports. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. Power supply via USB bus - USB bus power. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions: 88 × 17 × 9 mm (W × D × H). Weight: 25 g (incl. cable). USB-A cable 12 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10/11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: USB-A hub with fixed 12 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.

DataTraveler Exodia M, 128 GB High-quality Kingston USB 3.2 Gen 1 flash drive Sliding cap protects the connector when not in use Convenient keyring loop for easy attachment Five-year warranty Kingston DataTraveler Exodia M is a USB 3.2 Gen 1 compliant storage solution for laptops, desktop PCs, monitors, and other digital devices. DT Exodia M enables fast transfers and convenient storage for documents, music, videos, and more. Multiple stylish colour options correspond to different capacities of up to 256GB. Its practical and durable design makes it an excellent choice for on-the-go use — at work, home, or school. Capacity: 128 GB Standard: USB 3.2 Gen 1 Operating temperature: 0 – 60 °C Storage temperature: -20 – 85 °C Dimensions: 67.4 x 21.8 x 11.6 mm Weight: 10 g Warranty: Five years Compatibility: Windows 11/10 macOS (v. 12.7.6 or later) Linux (v. 4.4.x or later) Chrome OS

Compact AXAGON ADSA-FP2C SLIM adapter with USB-C 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-C cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer.  The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type C male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD,  max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 18 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-C - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Sandberg USB 3.0 Gigabit Network Adapter gives you an easy and flexible network connection socket on any USB-enabled computer. Design Colour of product: White Īpašības Full duplex: Y Informācija par iepakojumu Quantity per pack: 1 pc(s) Package width: 89 mm Package depth: 19 mm Package height: 193 mm Package weight: 590 g Package type: Box Other features Compatible operating systems: Windows 10/8/7/Vista/XP, Mac OS 10.x Networking standards: IEEE 802.3x

Miniature metal USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-M1AL with 1.2 m long USB cable fast and easy connects up to four USB devices to computer. The metal hub body is made of aluminum and provides perfect mechanical protection. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 120 cm long USB cable is suitable for use with a desktop computer. This compact hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc.  Input:   1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 120 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s).  USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 60 g (incl. cable). USB cable length 120 cm. Power / Charging:  USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports.  The USB hub can also handle the permanent connection of several external drives simultaneously.  Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Miniature metal USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-M1A fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input:   1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector.     Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 35 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Miniature metal USB-C 3.2 Gen 1 hub AXAGON HUE-M1C fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones USB-C connector. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input:   1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector.     Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Compatible with Thunderbolt 3 interface. Connecting USB type C male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 33 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB-C hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Switching to a Mac usually means running into that one Windows-only program or game you still need every so often, and buying a full Windows license just to run it feels like overkill. CrossOver for Mac solves exactly that problem. Built by CodeWeavers on top of the open-source Wine project, it acts as a translator between Windows software and macOS, letting Windows applications and games run directly on your Mac without installing Windows itself. There's no virtual machine, no dual-boot setup, and no reboot required – Windows apps show up in your Dock and run right alongside your regular Mac software. CrossOver Mac supports a wide range of productivity tools, utilities, and PC games, including many DirectX titles, and it runs on both Intel and Apple Silicon machines. For students, professionals, and gamers who just need one or two Windows programs working without overhauling their whole setup, CrossOver keeps things simple and considerably lighter than a full virtualization tool. What can I do with CrossOver Mac? Use your CrossOver Mac for: Running Windows productivity software. Open business and utility apps that only ship for Windows, without needing a separate license for the OS itself. Playing Windows games. Run a broad range of PC titles, including many DirectX games, translated through CrossOver's built-in graphics layer. One-click installs. Use CrossTie technology to automatically install supported Windows software straight from the compatibility database. Native macOS integration. Access Windows apps from your Dock just like any Mac program, with shared clipboard and file support. Bottle-based app management. Keep individual Windows applications isolated in their own environment for cleaner, more reliable performance. Apple Silicon compatibility. Run CrossOver on M-series Macs with ongoing performance optimizations from CodeWeavers. Regular compatibility updates. Benefit from continuous updates that expand support for new Windows software and games as they release. Skipping the Windows license entirely. Run supported software without buying, installing, or maintaining a separate copy of Windows. Run Windows Software on Your Mac Without the Extra Cost A CrossOver Mac subscription is the practical middle ground between rebooting into Boot Camp and paying for a full virtual machine setup just to run one program. It skips the Windows license entirely, which alone can save a meaningful amount of money over buying and maintaining a separate OS. Performance holds up well too, since CrossOver isn't emulating a whole machine – it's translating Windows calls directly into something macOS can run natively. Gamers get a particularly strong use case here, with regular updates aimed at keeping popular Windows titles playable on Mac hardware. Whether it's one stubborn Windows-only app or a handful of PC games you miss, CrossOver Mac gets them running without disrupting the rest of your setup. Subscribe to CrossOver and get your Windows software working on macOS the easy way.

4 × USB 3.1 Gen 1 ports The SAVIO AK-53 USB-A hub is a practical, compact device that allows you to increase the number of available USB ports. Thanks to it, you can connect up to 4 additional peripheral devices to the computer, such as external drives, keyboards, and mice. The AK-53 model guarantees quick and easy connection of accessories. We reccomend it for laptops and PCs with a small number of USB-A inputs. 5 Gbps data transfer The AK-53 USB hub works with Windows 11, 10, 8.1, 8, 7, XP, MAC OS, and Linux operating systems. The USB Gen 3.1 standard provides fast data transfer with the speed up to 5 Gbps. The hub is backward compatible with previous USB standards. Plug & Play Connecting the AK-53 is extremely simple. You only need to plug it into the USB-A port to the output device. The hub works in Plug & Play mode, so no driver installation or additional configuration is required. Portable The modern SAVIO AK-53 Hub has grey matte colour scheme and is made of durable aluminium. Its compact size and light weight make it ideal for people who use their laptops on the move. The handy device looks extremely elegant and increases the comfort of using multimedia devices.

Kompaktiškas dizainas: 60 % išdėstymas su 61 klavišu leidžia sutaupyti vietos ant stalo ir išlaikyti funkcionalumą. Idealiai tinka vartotojams, ieškantiems efektyvumo ir elegancijos. Patobulintos multimedijos funkcijos: 6 daugialypės terpės spartieji klavišai, pasiekiami FN klavišu. Pagerina produktyvumą ir patogumą. Pritaikomas apšvietimas: 19 spalvingų apšvietimo režimų, kad suasmenintumėte žaidimų patirtį. Reguliuojamas pagal jūsų stilių ir nuotaiką. Žaidimų tikslumas: 25 klavišų anti-ghosting užtikrina tikslų, be klaidų žaidimą. Siūlo tikslią konkurencinio pranašumo valdymą. Ergonomiškas dizainas: Trys reguliuojami kampai rankoms palaikyti. Padidina komfortą ilgų žaidimų seansų metu. Patikimas ryšys: USB-C prievadas stabiliam ir greitam ryšiui palaikyti. 160 cm laidas lankstumui ir stalo organizavimui. Platus suderinamumas: Veikia su Windows (8, 10, 11) ir Mac OS. Užtikrina sklandų veikimą visose platformose. Tipas Mechaninis Raktų skaičius 61 Skaitmeninė klaviatūra Ne Vielos ilgis (m) 1.6 Apšvietimas Taip Integruoti USB prievadai 1 Matmenys (cm) 29 x 10.2 x 4 Svoris (kg) 0,5 Spalva Juoda

The advanced AXAGON ADS-1PQN active USB converter easily extends your computer with a RS 232 standard serial port. The highest level of compatibility between USB - serial RS232 adapters thanks to the use of an original valued chip by the Scottish Company FTDI. The fixed 1.5 m long USB-A cable is suitable for use with both a desktop computer and a laptop. The cable is equipped with gold-plated connectors and contacts, the very durable body of the adapter is also suitable for industrial applications. Double shielding protects transmitted signals from adverse interference. The converter is the ideal accessory for your computer to connect barcode readers, cash register printers, scanners, microcontroller programmers, CNC machines, modems, and to upgrade or configure set-top boxes, security devices, switches, transmitters and other devices.  Input:   USB 480Mbps interface (USB 2.0), backward compatible with USB 1.1. Connecting USB type A male connector located on a fixed 1.5 m cable. Output: 1x serial RS-232 port with a DB9 male connector integrated in the adapters body. Transmission rate adjustable in range 300 bit/s - 250 kbit/s. Compatible with 16C950 UART, backward compatible with 16C550, 16C650, 16C750 and 16C850. Other features: Plug and Play support. FIFO buffer sending 256B and receiving 128B. Adjustable flow control Xon/Xoff, hardware or none. Adjustable word length 7 or 8 bits. Adjustable parity (even, odd, none, mark, space), 1 or 2 stop bits. Adjustable usage of the FIFO Buffer: receiving (64-4096b) and sending (64-4096b). Adjustable latency 1 - 255 ms. Adjustable interrupt 0 10.000 ms (read) / 0 10.000 ms (write). Adjustable idle pause 1 - 3600 seconds. Option to activate other functions: Serial Enumerator, Serial Printer, Cancel If Power Off, Event On Surprise Removal, Set RTS On Close, Disable Modem Ctrl At Startup, Enable Selective Suspend. Adjustable number of the port COM1 to COM256. Adapter power supply via USB (bus power) - no auxiliary power supply required. Gold-plated connectors and contacts ensure reliable connection and prevent oxidation, thus ensuring a long life of the converter. Cable outer diameter 5 mm, double shielded. Use original FTDI FT232RL chip and TI TRS213l serial line driver. Adapter body dimensions 35 x 56 x 17 mm, cable length 1.5 m.  Adapter weight 83 g (including cable). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically.  Package contains: USB - serial adapter with a 1.5 m long permanently attached USB cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

SSD external drive enclosure for connection via USB 3.1 Type-C interface. Suitable for M.2 NVMe M key port SSD. Features: Fast data transfer (up to 10Gbps). Power via USB port directly. Plug&Play, no driver required. Case body is made of aluminum. Greater heat dissipation. Screws can protect the hard drive from falling down. Technical specifications: Dimensions: 106x32x9 mm. SSD drive: SATA. Compatible interface: M.2 NVME PCLE M key / M.2 NVME PCLE B+M key. Input: USB Type-C 3.1. Disc size: 2230, 2242, 2260, 2280. Connection type: USB Type-C - USB Type-C. Maximum capacity: 2TB. Data transfer speed: up to 10Gpbs. Compatible with the following operating systems: Windows SE / ME / 2000 / XP / Vista / Windows 8 / Windows 10 / Mac OS 8.6 and later, Android with OTG. Case material: aluminum. Color: black. Weight: 50g. Set includes Case USB Cable Fixing screws Screwdriver.

3 × USB-A  3.1 Gen 1 ports The SAVIO AK-58 hub is a practical, compact accessory. It allows you to increase the number of available USB ports. You can connect an additional 3 peripheral devices such as external drives, keyboards, and mice. The AK-58 model guarantees quick and easy connection of accessories. We recommend it for laptops and PCs with a small number of USB-A inputs. 1000 Mbps SAVIO AK-58 is not only a hub but also an adapter, which is an ideal solution for laptops and PCs. The device has a female RJ-45 Gigabit Ethernet socket. This function provides a stable and fast connection to the Internet at speeds of up to 1000 Mbps. 5 Gbps data transfer The AK-58 USB hub works with Windows 11, 10, 8.1, 8, 7, XP, MAC OS, and Linux operating systems. The USB Gen 3.1 standard provides lightning-fast data transfer. It speeds of up to 5 Gbps. The hub is backward compatible with previous USB standards.   Plug & Play Connecting the AK-58 is extremely simple. Plug it into the USB-A port on the output device. The hub works in Plug & Play mode, so no river installation or additional configuration is required. Portable The modern SAVIO AK-58 Hub has been retained in a dark grey matte colour scheme and is made of durable aluminium. Its compact dimensions and light weight make it ideal for people who use their laptops on the move. The handy device looks extremely elegant and increases the comfort of using multimedia devices.

Internetinė kamera „EMEET SmartCam C960 HD“„EMEET SmartCam C960“ sujungia 1080p „Full HD“ raišką, automatinę šviesos korekciją ir du triukšmą mažinančius mikrofonus. Platus matymo laukas, USB „Plug and Play“, privatumo dangtelis ir reguliuojama konstrukcija pritaikyti darbui bei mokymuisi.1080p vaizdas ir korekcija1080p jutiklis ir keturių sluoksnių objektyvas su antirefleksine danga padeda išlaikyti vaizdo detales. Automatinis apšvietimo pritaikymas koreguoja ryškumą ir mažina mirgėjimo poveikį pagal aplinką.Du mikrofonaiDu visakrypčiai mikrofonai nurodomomis sąlygomis priima balsą iki 2,4 m atstumu. Triukšmo ir aido slopinimas padeda aiškiau perduoti kalbą.USB „Plug and Play“Prijungus USB kabelį prie palaikomo kompiuterio kamera paruošiama „Plug and Play“ būdu. Atskiros tvarkyklės įprastai nereikia.Privatumo dangtelisPasukamas fizinis objektyvo dangtelis leidžia uždengti kamerą, kai vaizdo perdavimas nereikalingas.Reguliuojamas tvirtinimasReguliuojamas pagrindas su 180° pasukimu ir 90° padėties keitimu padeda pasirinkti kampą. Kamera statoma ant stalo, tvirtinama ant monitoriaus arba prie stovo 1/4 colio sriegiu. 90° matymo laukas aprėpia ir nedidelę žmonių grupę.Programėlė ir suderinamumas„EMEETLINK“ suteikia vaizdo nustatymus. Palaikomos „Windows“, „macOS“ ir suderinamos „Zoom“, „Teams“, „Webex“, „Google Meet“, „GoToMeeting“, „FaceTime“ bei kitos konferencijų programos.Komplekte Kamera Privatumo dangtelis Naudojimo instrukcija Gamintojas EMEET Modelis C960 Didžiausia raiška 1080p, 30 kadr./s Matymo kampas (FoV) 90° Fokusavimo tipas Fiksuotas fokusas Fokusavimo diapazonas 30–300 cm Vaizdo kodekas YUY2 / MJPEG Vaizdo jutiklis 1/2,7 colio CMOS, 2,07 mln. vaizdo taškų Optinis židinio nuotolis 2.88 mm Ekspozicijos režimas Automatinis Baltos spalvos balansas Automatinis BLC (foninio apšvietimo kompensavimas) Automatinis Mikrofonas 2 visakrypčiai mikrofonai Rekomenduojamas atstumas iki mikrofono 2.4 m Jungtis USB 2.0, USB-A UVC ryšio protokolas UVC 1.0–1.5 Privatumo dangtelis Taip Stovo sriegis Taip Matmenys (plotis × aukštis × gylis) 125 mm × 68 mm × 52 mm Svoris 125 g Paskirtis Vaizdo konferencijos, naudojimas darbe Maitinimas 5 V, 500 mA Vidutinės energijos sąnaudos 750 mW Suderinamumas Zoom, Microsoft Teams, Skype for Business, Slack, Webex ir kitos programos Operacinė sistema Windows 7, 10, 11 arba naujesnė; Mac OS 10.10 arba naujesnė