Mac OS 1

The multi-port USB-C 5Gbps AXAGON HMC-H3A STARTER 4in1 hub expands your laptop, computer or phone with four ports. Connect your laptop to the hub via a 15 cm long USB-C cable. You immediately have connectors to connect a monitor and three USB devices at the same time. The USB hub offers three USB outputs, two with USB-A 480Mbps and the third with USB-A 5Gbps. Transfer rate is up to 5Gb/s thanks to USB 3.2 Gen 1 interface. The hub can also handle permanent connection of several external drives simultaneously. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/30Hz Ultra HD, 2K/60Hz Quad HD or 1080p/120Hz Full HD and the transmission of multi-channel audio. The compact and slim aluminium body not only looks great, but also provides mechanical durability and passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running.  For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3, 4 and above). The hub can easily connect to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (computer, tablet or phone connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 10Gbps, USB4, Thunderbolt 3/4. USB outputs: 2x USB 480Mbps port, USB-A female connector. 1x USB 5Gbps port, USB-A female connector. USB-C hub can handle the connection of several external drives at the same time. Video outputs: 1x HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/30Hz Ultra HD, 2K/60Hz Quad HD, 1080p/120Hz Full HD.  Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. A suitable updated OS and up-to-date graphics drivers are also required. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support.  Standby mode support. Power supply via USB bus (USB bus power). The blue LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 11 x 95 x 26 mm (H x W x D). Weight 34 g (incl. cable). USB-C cable 15 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android.  Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 15 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG

The DA-71120-1 M.2 NVMe SSD enclosure offers a powerful and versatile storage solution. It supports M.2 modules in 2230, 2242, 2260, and 2280 form factors and is compatible with a wide range of SSDs. Up to 8TB capacity provides enough space for all your files and data. With a fast 10Gbps data transfer rate and a USB 3.1 Gen 2 interface that is backward compatible with USB 3.1, 3.0, 2.0, and 1.1, you can enjoy fast file transfers and smooth performance. The plug-and-play design allows for easy installation without complicated settings. The robust JMS583 chipset ensures reliable and efficient NVMe operation, while the integrated LED indicator allows you to easily monitor the status of your SSD. The durable and stylish aluminum housing in Pantone 430C provides excellent passive heat dissipation. With compact dimensions of 101x32x10 mm and a weight of only 97 g, the case is ideal for mobile use and compatible with Windows, macOS, Linux, Google Chrome OS, Android and iOS. Wide Compatibility: Supports M.2 modules in 2230, 2242, 2260, and 2280 formats, compatible with a wide range of SSDs Large Capacity: Offers up to 8TB of storage space for all your files and data Fast Data Transfer: 10Gbps data transfer speed ensures fast file transfers and smooth operation USB 3.1 Gen 2 Interface: Latest USB technology with backward compatibility to USB 3.1, 3.0, 2.0, and 1.1 Plug and Play: Simply connect via USB and start working straight away Multi-platform support: Compatible with Windows, macOS, Linux, Google Chrome OS, Android, and iOS Robust Chipset: JMS583 chipset for reliable and efficient NVMe operation LED Activity Indicator: Integrated LED indicator to monitor SSD status Durable and Stylish: Aluminum casing with excellent passive heat dissipation Portable Design: compact and lightweight with dimensions of 101x32x10 mm and weight of only 97 g

Įvestis: 5V/3A, 15V/3A, 20V/5A USB-C USB prievadai: 1 x USB-C PD3.0 + 3 x USB 3.0 USB-C išvestis: 20V / 5A PD3.0 100W, 2.0 duomenų perdavimo sparta USB 3.0 išvestis: 5V / 0,9A, duomenų perdavimo sparta iki 5Gbps HDMI prievadas: iki 4K 30 Hz raiška Suderinamumas: Microsoft Windows, Mac OS, Linux, Android, Chrome OS Diegimas: Plug & Play, nereikia tvarkyklių Kabelio ilgis: 17cm, integruotas Medžiaga: aliuminio lydinys Gaminio matmenys: 42 x 112,5 x 16,5 mm Produkto svoris: 60g Pakuotėje yra: 1 x USB-C kelių prievadų HUB, 1 x vartotojo vadovas Prievadų skaičius 5 Prievadų tipas USB 3.0 USB standartas USB Type-C Greitas įkrovimas Power Delivery Maitinimas USB Type-C Matmenys (cm) 10 x 5 x 1.5 Svoris (kg) 0.10 Spalva Pilka

The DA-71156 USB HDD Enclosure offers a versatile and efficient storage solution for NVMe and SATA SSDs. Supporting M.2 modules in 2230, 2242, 2260, and 2280 form factors and a maximum capacity of up to 8TB, it is compatible with a wide range of SSDs. Data transfer speeds are up to 10Gbps for NVMe and 6Gbps for SATA, and the USB 3.1 Gen2 interface is backward compatible with USB 3.1, 3.0, 2.0, and 1.1. The tool-free design enables easy installation, and the robust JMS581DL chipset ensures reliable and efficient operation. An integrated LED indicator makes it easy to monitor the status of the SSD, and the durable Pantone 430C aluminum housing provides excellent passive heat dissipation. With its compact dimensions of 101x32x10 mm and a weight of only 97 g, the case is ideal for mobile use. It supports plug-and-play and is powered directly by USB. The case is compatible with Windows (11, 10, 8, 7, XP, 2000), macOS, Linux (2.4.x or later), Google Chrome OS (9.x or later), Android and iOS and offers comprehensive support for USB-C products. Wide Compatibility: Supports M.2 modules in 2230, 2242, 2260, and 2280 formats, compatible with a wide range of SSDs Large Capacity: Offers up to 8TB of storage space for all your files and data Fast Data Transfer: 10Gbps data transfer speed (6Gbps for SATA) ensures fast file transfers and smooth operation USB 3.1 Gen 2 Interface: Latest USB technology with backward compatibility to USB 3.1, 3.0, 2.0, and 1.1 Plug and Play: Simply connect via USB and start working straight away Multi-platform support: Compatible with Windows, macOS, Linux, Google Chrome OS, Android, and iOS Robust Chipset: JMS581DL chipset for reliable and efficient operation LED Activity Indicator: Integrated LED indicator to monitor the status of the SSD Durable and Stylish: Pantone-colored aluminum housing 430C with excellent passive heat dissipation Portable design: Compact and lightweight with dimensions of 101x32x10 mm and weight of only 97 g

Metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-CR3A connects up to three USB devices to laptop or computer and also adds SD / microSD card reader. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface is transfer speed up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The USB multi-port hub is the ideal accessory for ultrabooks with a small number of USB-A ports and missing card reader. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard, mouse and card reader to your phone or tablet. Input:   1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector.     Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. Output: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0 / 1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Support for SD 3.01 and SD Jukebox applications (CPRM functions). Ultra High Speed UHS-I support (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - in file managers, the reader is indicated as two disk drives. FAT 12 / 16 / 32, NTFS, exFAT (FAT 64) file formats support. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 84 x 24 x 18 mm. Weight 42 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux

Internetinė kamera „EMEET SmartCam Nova“„EMEET SmartCam Nova“ skirta 1080p „Full HD“ pokalbiams su automatiniu fokusavimu ir apšvietimo korekcija. Du triukšmą mažinantys mikrofonai papildo vaizdą. Lengva reguliuojama kamera veikia „Plug and Play“ režimu.Automatinė apšvietimo korekcija1080p jutiklis perteikia spalvas bei detales, o automatinė silpno apšvietimo korekcija pritaiko vaizdą prie kambario sąlygų.Automatinis fokusavimasAutomatinio fokusavimo objektyvas koreguoja ryškumą pasikeitus naudotojo padėčiai ar rodant objektus. Veikimo greitis priklauso nuo apšvietimo bei atstumo.Du mikrofonaiDu mikrofonai ir triukšmo mažinimas padeda išryškinti kalbą bei riboti aplinkos garsų patekimą į pokalbį.73° matymo laukas73° objektyvas aprėpia naudotoją ir dalį darbo vietos. Jis tinka individualiems pokalbiams bei nedidelės grupės kadrui, priklausomai nuo atstumo.Paprastas USB prijungimasUSB „Plug and Play“ nereikalauja atskiros tvarkyklės palaikomoje sistemoje. Kamerą galima naudoti su suderinamomis susitikimų programomis.Pasukama konstrukcija360° sukamas objektyvo mazgas ir 180° reguliuojamas pagrindas leidžia pasirinkti kampą ant stalo ar kitoje darbo vietoje. Nedidelį korpusą patogu pernešti.Vaizdo nustatymai„EMEETLINK“ leidžia pritaikyti palaikomus vaizdo parametrus kambario apšvietimui ir asmeniniam skoniui.Komplekte Internetinė kamera Privatumo dangtelis Naudojimo instrukcija Gamintojas EMEET Modelis Nova Didžiausia raiška 1080p, 30 kadr./s Matymo kampas (FoV) 73° Fokusavimo tipas Automatinis fokusavimas Fokusavimo diapazonas 20–300 cm Vaizdo kodekas YUY2 / MJPEG Vaizdo jutiklis 1/2,7 colio CMOS, 2,07 mln. vaizdo taškų Židinio nuotolis 2.95 mm Ekspozicijos režimas Automatinis Baltos spalvos balansas Automatinis BLC (foninio apšvietimo kompensavimas) Automatinis Mikrofonas 2 visakrypčiai mikrofonai Rekomenduojamas atstumas iki mikrofono 1 m Jungtys USB 2.0, USB-A UVC ryšio protokolas UVC 1.0–1.5 Privatumo dangtelis Taip Stovo sriegis Taip Matmenys (plotis × aukštis × gylis) 403 mm × 348 mm × 295 mm Svoris 154 g Paskirtis Vaizdo konferencijos, naudojimas darbe Maitinimas 5 V, 500 mA Vidutinės energijos sąnaudos 1 W Suderinamumas Zoom, Microsoft Teams, Skype for Business, Slack, Webex ir kt. Operacinė sistema Windows 10, 11; Mac OS 10.14 arba naujesnė

3 × USB-A  3.1 Gen 1 ports The SAVIO AK-57 hub is a practical, compact accessory. It allows you to increase the number of available USB ports. You can connect an additional 3 peripheral devices such as external drives, keyboards, and mice. The AK-57 model guarantees quick and easy connection of accessories. We recommend it for laptops and PCs with a small number of USB-A inputs. 1000 Mbps SAVIO AK-57 is not only a hub but also an adapter, which is an ideal solution for laptops and PCs. The device has a female RJ-45 Gigabit Ethernet socket. This function provides a stable and fast connection to the Internet at speeds of up to 1000 Mbps. 5 Gbps data transfer The AK-57 USB hub works with Windows 11, 10, 8.1, 8, 7, XP, MAC OS, and Linux operating systems. The USB Gen 3.1 standard provides lightning-fast data transfer. It speeds of up to 5 Gbps. The hub is backward compatible with previous USB standards.  Plug & Play Connecting the AK-57 is extremely simple. Plug it into the USB-C port on the output device. The hub works in Plug & Play mode, so no driver installation or additional configuration is required. Portable The modern SAVIO AK-57 Hub has been retained in a dark grey matte colour scheme and is made of durable aluminium. Its compact dimensions and light weight make it ideal for people who use their laptops on the move. The handy device looks extremely elegant and increases the comfort of using multimedia devices.

B-HUB1439-LAN 4 Port hub wiht USB 3.2 Gen 1 Type-A or Type-C interface 4-in-1 Adapter - USB 3.2 Gen 1 zu Gigabit LAN und 3x USB 3.2 Gen 1 2x USB Type-A, 1x USB Type-C, 1 x RJ45 Gigabit Ethernet LAN Unterstützt USB-A und USB-C Hostanschluss über beigefügten Adapter Datentransferraten von bis zu 5 Gbit/s (USB) und 1 Gbit/s (LAN) Unterstützt Wake-on-LAN und Wake-on-WAN Funktion Unterstützt IEEE 802.3x, 802.3u, 802.3ab, 802.3, 802.1P, 802.1Q, 802.3az-2010 (EEE) Hochwertiges Aluminiumgehäuse Unterstützt Windows, Chrome OS und macOS mit Plug & Play

SSD external drive enclosure for connection via USB Type-A interface. Suitable for M.2 NGFF and NVMe up to 1.8" SSD. Features: Fast data transfer (up to 5Gbps). Power via USB port directly. Plug&Play, no driver required. Case body is made of aluminum. Greater heat dissipation. Screws can protect the hard drive from falling down. Technical specifications: Dimensions: 102x31x9 mm. SSD drive: NGFF, NVMe. Compatible interface: M.2 NGFF, NVMe. Input: USB 3.1. Disc size: 2230, 2242, 2260, 2280. Connection type: USB Type-C - USB Type-A. Maximum capacity: 4TB. Data transfer speed: up to 5Gbps. Compatible with the following operating systems: Windows SE / ME / 2000 / XP / Vista / Windows 8 / Windows 10 / Mac OS 8.6 and later. Case material: aluminum alloy. Color: black, silver. Weight: 55g. Set includes Case USB Cable.

Apjoms: 256 GB, USB versija: USB 3.2, Lasīšanas ātrums: Nav zināms, Rakstīšanas ātrums: Nav zināms, OS savietojamība: Windows/Mac/Linux, Garantija: 2 gadi

DoubleButton is a wireless hold-up device with advanced protection against accidental presses. The device communicates with a hub via the encrypted Jeweller radio protocol and compatible only with Ajax security systems. The line-of-sight communication range is up to 1300 meters. DoubleButton operates from the pre-installed battery up to 5 years.  DoubleButton is connected and configured via Ajax apps on iOS, Android, macOS, and Windows. Push notifications, SMS, and calls can notify about alarms and events.  Operating principle DoubleButton is a wireless hold-up device, featuring two tight buttons and a plastic divider to protect against accidental presses. When pressed, it raises an alarm (hold-up event), transmitted to users and to the security company's monitoring station.  An alarm can be raised by pressing both buttons: one-time short or long press (more than 2 seconds). If only one of the buttons is pressed, the alarm signal is not transmitted. All DoubleButton alarms are recorded in the Ajax app's notification feed. The short and long presses have different icons, but the event code sent to the monitoring station, SMS, and push notifications do not depend on the pressing manner. DoubleButton can only operate as a hold-up device. Setting the type of alarm is not supported. Keep in mind that the device is active 24/7, so pressing the DoubleButton will raise an alarm regardless of the security mode.  How to carry DoubleButton The button is easy to carry around thanks to a special hole on its body. It can be worn on the wrist or neck, or be hanged on a keyring. DoubleButton has an IP55 protection index. Which means that the device body is protected from dust and splashes. And a special protective divider, tight buttons, and the need to press two buttons at once eliminate false alarms.  Specifications: Classification: Addressed Radio Panic Button. Compatibility: Operates with Hub, Hub Plus, Hub 2, Hub 2 Plus, ReX featuring OS Malevich 2.10 and later. False alarm prevention: Yes. Number of buttons: 2. Operating temperature range: from -10C to +40C. Permissible humidity: up to 75%. Protection class: IP55. Size: 47 x 35 x 16 mm.  Weight: 17 g. Power supply: Battery: 1 CR2032. Power supply voltage: 3V. Battery life - up to 5 years. Alarm transmission: active when push both buttons.  Complete set:  Panic button. Pre-installed CR2032 battery. Double-sided tape. Quick Start Guide.  Warranty: 24 months from the date of sale. Batteries are not covered under warranty.

Adapter USB Type-C to 1x RJ-45, 3x USB Type-A Features: LAN adapter and USB hub 4-in-1, with RJ-45 output and three USB Type-A 3.0 connections.Gigabit Ethernet port provides access to superfast network speeds up to 1Gbps, stable and fast. It requires no software or complicated installation process. Backward compatible with 10/100/1000 Mbps Ethernet.USB 3.0 connectors allow you to connect mouse, keyboard, video camera, external drive or flash device, etc. Compatible with MacBook Pro, Chromebook and more.USB 3.0 port supports 5Gb/s data transfer rate.Notes:The adapter is designed for PC only, it is not suitable for USB Type-C tablets and smartphones.To transfer data at super-fast speeds, your computer, peripherals, cables, and software must all support USB 3.0.This hub is compatible with Thunderbolt 3 and USB3.1 standards.  Technical data: Input: USB Type-C plug (M).Output: 1x RJ-45 socket (F), 3x USB 3.0 Type-A sockets (F).USB standard: 3.0.Data transfer rate: up to 5Gbps.Ethernet network speed: 10/100/1000Mbps.Supported network protocols: IEEE 802.3, IEEE 802.3u, 802.3ab, IEEE 802.3az; IPv4/IPv6.Supported OS: Windows, Mac OS10.10+, Chrome OS, Linux.Certificates: FCC part15, CE, RoHS.Cable length: about 140mm.Dimensions: 93x23x16mm.Color: black.  Warranty: 24 months.   

5 in 1 USB-C Hub: UH5020C turns a single USB-C port into 5 ports with a 4K@60Hz HDMI, 100W Power Delivery, 1× USB-C Data Port, 2× USB-A Data Ports. Ultra High-Definition Media Display: Connect to an external monitor via the 4K@60Hz HDMI port for a stunning ultra high-definition experience. Powerful 100W Fast Charging: Plug the charging cable into UH5020C and continuously deliver up to 100W of power to your PC while transferring files or streaming media. 5 Gbps SuperSpeed Data Transfer: UH5020C adds three USB 3.0 ports to your device, enabling simultaneous use of multiple USB devices. Easy to Use with Plug & Play: Simply plug in and start using in seconds, thanks to driver-free install with Mac OS, Windows 11/10/8.1/8/7, Linux OS, iPadOS, iOS, Android, Chrome OS, and Nintendo OS.

Platums- 12.6 mm. Augstums- 4.89 mm. Korpusa materiāls- Alumīnijs. Atmiņas ietilpība- 128 GB. Savienojums- USB 3.2. Saderīgs ar operētājsistēmām- Chrome OS. Windows 8.1. Linux. Windows 8. Windows 10. Mac OS X. Garantija- 24 mēn. Papildu informācija- Kompakts dizains.

Blitzwolf BW-NEW TH8 10-in-1 HUB adapterThe BlitzWolf BW-NEW TH8 is a 10-in-1 adapter that turns one USB-C port into a wide set of capabilities. It is equipped with three USB-A 3.0 ports, two USB-C 3.0 ports, one USB-C PD 100 W charging port, an HDMI 4K@60Hz port, an SD 3.0 card slot, a TF 3.0 card slot and an RJ45 1000 Mbps port. As a result, it offers full flexibility and allows you to greatly increase the functionality of your computer or laptop!Fast Internet connectionThe BW-NEW TH8 adapter enables you to connect to the Internet quickly thanks to its RJ45 port, which offers transmission speeds of up to 1000 Mbps. This means you can enjoy smooth web browsing, efficient downloading of large files, convenient viewing of movies on streaming platforms and even dynamic online gameplay!Streaming video in 4K qualityThe BlitzWolf BW-NEW TH8 is equipped with an HDMI port that supports 4K resolution at 60 Hz, allowing you to display high-quality video on external monitors, projectors or TVs. It's perfect for those who need an expanded workstation or want to enjoy a cinematic experience while watching movies.Fast charging for your devicesThe BlitzWolf BW-NEW TH8 adapter offers support for PD3.0 fast charging technology, allowing connected laptops to renew energy efficiently. So you can comfortably use your devices while powering them up without worrying about power drops.Instant data transferWith USB-C and USB-A 3.0 ports, the BW-NEW TH8 adapter allows you to transfer files at speeds of up to 5 Gbps. This allows you to transfer large videos, documents or photos quickly and efficiently, saving you time and increasing productivity.Simultaneous reading and writing from two cardsThe BW-NEW TH8 offers convenient memory card support, allowing simultaneous use of two media - SD and TF. In addition, read speeds of up to 90 MB/s and write speeds of up to 80 MB/s mean you can quickly transfer large files, photos and documents. This is an ideal option for photographers and web developers!Wide compatibility, plug & play systemThe BlitzWolf BW-NEW TH8 adapter is designed to work right out of the box - no additional drivers to install. What's more, it's compatible with macOS, Windows and Chrome OS, allowing you to quickly and seamlessly extend the capabilities of most popular laptop and computer models. Manufacturer BlitzWolf Model BW-NEW TH8 Color Silver Available ports 3x USB-A 3.0, 2x USB-C 3.0, 1x USB-C PD 100 W for charging, 1x HDMI 4K@60Hz, 1x SD card slot 3.0, 1x TF card slot 3.0, 1x RJ45 1000 Mbps Starting voltage and current 5 V / 330 mA Charging Support for PD3.0 fast charging standard, power up to 100 watts Read speed for TF / SD (3.0) cards Up to 90 MB/s Write speed for TF / SD cards (3.0) Up to 80 MB/s Operating temperature From -10°C to 40°C Connector USB-C Material Aluminum alloy Dimensions 14.5 x 5.3 x 1.5 cm Cable length Approximately 22 cm

Technical data Number of keys: 106/107 Key layout: Full layout Switch type: membrane Service life: 5 M presses Lighting: No Color: gray Material: Aluminum Interface: 2.4GHZ (USB A receiver) / Type C for charging only Additional rising legs: No Cable length (m): 1 Braided cable: no Location: USA Compatible with Windows 7/8/10/11, Mac OS Dimensions (mm): 430x125x8 Weight (g): 520

Input: 5V/3A, 15V/3A, 20V/5A USB-C USB ports: 1x USB-C PD3.0 + 3 x USB 3.0 Output USB-C: 20V / 5A PD3.0 100W, 2.0 data transfer rate Output USB 3.0: 5V / 0.9A, up to 5Gbps data transfer rate HDMI port: Up to 4K at 30Hz resolution Compatibility: Microsoft Windows, Mac OS, Linux, Android, Chrome OS Installation: Plug & Play, no drivers required Cable length: 17cm, integrated Material: Aluminum alloy Product dimensions: 42 x 112.5 x 16.5mm Product weight: 60g   Package includes: 1 x USB-C Multi-port HUB, 1 x User manual