Mini Display USB C

ANLAN facial massager 01-ADRY32-02AANLAN 01-ADRY32-02A massager is a device tailored to the needs of your skin. The product allows you to thoroughly cleanse your face and prepare it for further skin care steps. Moreover, it aids the absorption of nutrients, reduces the appearance of wrinkles and dark circles around the eyes. It also helps restore firmness and radiance to the skin.Cleansing facial skinProper facial care begins with cleansing. Clean mode uses heat therapy (38°C ~ 42°C) to open pores. Vibrations of about 10,000 rpm effectively remove impurities and makeup residue, while positive ions facilitate deep pore cleansing.Moisture modeChoose Moist mode, which helps moisturize the skin. The high vibration frequency breaks down macromolecules in skin care products. What's more, negative ions help the absorption of nutrients from cosmetics. Enjoy healthy and moisturized skin with ANLAN 01-ADRY32-02A.Restore skin firmness and get rid of wrinklesGive your skin a youthful appearance. The ANLAN 01-ADRY32-02A massager offers an EMS mode that tightens the skin and provides a lifting effect. Eye mode, on the other hand, uses microcurrents and 3 levels of warm compression to soothe the delicate skin around the eyes and facilitate the absorption of cosmetics. Moreover, it tightens the skin, reduces the appearance of wrinkles and reduces dark circles under the eyes.Light therapyExperience the beneficial power of phototherapy. The massager uses blue light with a wavelength of 463 nm, which fights bacterial conditions and helps treat acne. And red light (623 nm) stimulates collagen production, improves skin elasticity and slows down the aging process.User-friendlyOperating the device will not cause you any problems. You can also use the power button to change modes, and a dedicated button allows you to adjust the temperature and EMS level. What's more, the easy-to-read LCD display informs you about the set mode. In addition, the massager does not take up much space in your bathroom or vanity case, making it easy to transport and store.Included massager holder for a cosmetic pad USB-A to USB-C charging cable instruction manual Manufacturer ANLAN Model 01-ADRY32-02A Color white Material ABS Dimensions 170 × 55 × 56 mm Weight approx. 115 g Vibration frequency approx. 10,000 rpm Temperature approx. 38°C ~ 42°C Light wavelength Red: approx. 623 nm, blue: approx. 463 nm Battery capacity 450 mAh Charging time approx. 2.5 h Automatic shutdown after approx. 5 min of non-use

functions Use the 20W Type-C PD port and Type-C charging cable to charge your iPhone 3x faster The digital display shows the battery level accurately With improved 22.5W output QC3.0 ports, your phone can be charged to 58% in just 30 minutes Fully charge in 6-8 hours via Type-C PD port Technical data Battery: Lithium polymer Capacity: 20,000 mAh / 74 Wh (3.7 V) Micro-USB input: 5V/2A, 9V/2A, 12V/1.5A (18W) Type C input (PD 3.0): 5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A (18 W) Type C output (PD 3.0): 5 V / 3 A, 9 V / 2.22 A, 12 V / 1.66 A (20 W) 1 USB output (QC3.0): 4.5V/5A, 5V/4.5A, 5V/3A, 9V/2A, 12V/1.5A (22.5W) 2 USB output (QC3.0): 4.5V/5A, 5V/4.5A, 5V/3A, 9V/2A, 12V/1.5A (22.5W) Total output power: 22.5W Fast charging time: 6-8 hours. with 18W power charger + Type-C to Type-C cable (not included) Protection functions: short circuit, overload, overload, over current Features: LCD display, fast charging, Huawei SuperCharge (22.5 W), pass-through charging Dimensions: 142.5x68x28mm Weight: 396g Compatibility: universal Compatible PD devices: iPad Pro 12.9'', iPad Pro 10.5'', iPad Pro 11'', iPhone 14/ 14 Plus/ 14 Pro/ 14 Pro Max, iPhone 13/ 13 Pro/ 13 Pro Max/ 13 Mini, iPhone 12 / 12 Pro/ 12 Pro Max/ 12 Mini, iPhone 11/ 11 Pro/ 11 Max/ XR/ X/ XS Max/ XS/ 8 Plus/ 8, Samsung S22 Ultra/ S22+/ S22, Samsung S21+/ S21, Samsung S20 Ultra / S20+ /S20, Samsung S10+/ S10/ S10e, Google Pixel 6 Pr/ 6, Google Pixel 5, Google Pixel 4 XL/ 4/ 3a XL/ 3a/ 3 XL/ 3

MOES WWP-BY-808 Wi-Fi Watering PumpThe MOES WWP-BY-808 is a smart irrigation pump with a single output that allows for automatic watering of plants at home, on the balcony, or in a greenhouse. Thanks to Wi-Fi connectivity and support for the Tuya, Smart Life, and MOES apps, you can remotely manage the watering schedule and adjust it to the needs of your plants. The device allows you to set the watering time and frequency (e.g., every 20 hours), and the built-in display enables quick adjustments without using a phone. USB-C power eliminates the need to replace batteries and ensures stable, uninterrupted operation.Precise Watering SchedulesThe pump allows you to precisely program watering cycles by specifying the duration of watering (e.g., 180 seconds) and the time intervals between cycles. This ensures that plants receive the right amount of water exactly when they need it, promoting healthy growth and eliminating the risk of over- or under-watering.Remote control and access sharingIntegration with mobile apps allows you to control the device from anywhere, check settings, and modify schedules in real time. The sharing feature lets you grant access to other household members, making it easier to care for plants together and providing greater flexibility in daily use.Manual mode and user-friendly operationThe built-in screen allows you to quickly set parameters directly on the device and switch to manual mode at any time. The child lock feature protects settings from accidental changes—simply hold down the button to lock or unlock the device.Flexible watering methodsThe pump allows you to water several plants at once using T-connectors and hoses, which works well for both small and larger gardens. It supports various irrigation methods, such as drip irrigation, which delivers water directly to the roots, and misting, which increases ambient humidity.Self-priming and convenient water sourceThe device is equipped with a suction hose with a filter, which allows water to be drawn from an external container, such as a bucket or bowl. The self-priming function allows for flexible system placement without the need to connect to a permanent water supply, which increases convenience and the range of applications in various spaces.Included Watering pump with handle 6 m water hose USB-C cable Spray nozzles x4 T-connectors x6 Hose clamps x3 Filter End cap Manufacturer Moes Model WWP-BY-808 Material ABS + PC Supply voltage 5.0–6.0 V Pump capacity 550 ml/min Dimensions Φ91.1 × 98.9 mm Weight 224 g Charging method USB Operating temperature -10°C–50°C Frequency band 2.412–2.484 GHz Maximum RF transmission power < +16 dBm

FNIRSI DSO153 portable mini 2-in-1 oscilloscope signal generatorThe FNIRSI DSO153 is a smart and compact 2-in-1 device that combines the function of an oscilloscope and a signal generator, offering exceptional functionality in a format that fits in the palm of your hand. It is designed for convenient operation in any conditions - both in the workshop and in the field. It is distinguished by its light weight, intuitive operation, and is extremely practical. It's an ideal tool for do-it-yourselfers, electronics engineers, teachers, or service technicians.Accurate waveform analysisThe oscilloscope enables advanced signal analysis with functions for stopping, zooming and shifting waveforms. This makes it easier to detect interference and study complex modulation patterns in detail. It supports the measurement of various types of signals - from 220V from the mains, to switching power supplies, to pulsed signals and other types of waveforms.Practical and energy-efficientThe built-in 1,000 mAh lithium battery provides long operation without recharging, making the device indispensable when working in the field. In addition, automatic shutdown after a period of inactivity saves energy and extends the life of the device.Intuitive operation and refined designThe FNIRSI DSO153 was made with attention to every detail. High-quality workmanship, responsive buttons, a 90° folding stand and a convenient mode switch make using the device a pleasure. The USB-C port allows fast charging and software updates, and support for up to 8 languages makes the oscilloscope a versatile tool around the world.Versatile applicationsWith its compact size and wide range of functions, the FNIRSI DSO153 is perfect for home appliance repair, auto service, DIY projects, science and research work. Whether you are working at home, at school or in the workshop, this tool will always be reliable. In addition, the oscilloscope offers automatic parameter adjustment, measurement of 8 different values, 1 kHz calibration signal and intelligent overload protection. The FNIRSI DSO153 is not just a pocket-sized measuring device - it is a versatile partner for special tasks.Included mini oscilloscope probe with crocodile clip charging cable lanyard for carrying adapter P6100 probe user manual Manufacturer FNIRSI Model DSO153 Bandwidth 1 MHz Sampling frequency 5 Ms/s Time base range 500ns - 20s Measuring values 12 types Trigger mode Automatic, single, normal Voltage measurement range 400 V Calibration square wave 1KHz Supported Glow function None Image recording None Trigger level display None Frequency 0-10 KHz Duty cycle 0-100% Amplitude 0.1-3V Waveform 14 types Throughput 1M Supported languages 8 (Chinese, English, Russian, Japanese, Spanish, Portuguese, German, Korean) Signal generator function Supported Automatic shutdown Supported Switching theme colors Supported

DarkFlash C365 computer case (white)The DarkFlash C365 is a functional computer case designed for impressive display of components while maintaining a compact size. The column-free design offers a 270° panoramic view, allowing for a full presentation of the interior – for example, components with backlighting. The option to install up to 7 fans allows you to create an efficient cooling system, and compatibility with various motherboards (E-ATX, ATX, M-ATX, ITX), graphics cards up to 330 mm in length, and CPU coolers up to 170 mm in height provides many expansion options.270° panoramic design without a corner profileThe C365 model uses two tempered glass panels that provide a wide 270° view of the interior. The lack of a vertical corner profile makes all components clearly visible, which works particularly well in configurations with RGB lighting. This design allows you to experiment freely with the design – realize your creative ideas and give your computer a unique character!Three-dimensional airflow systemThe C365 is designed for effective component cooling. Large ventilation grilles with numerous openings create a three-dimensional airflow channel that supports effective heat dissipation from inside the case. This solution improves temperature stability even when using demanding components.Create an efficient cooling systemThe DarkFlash C365 allows you to install up to 7 fans or 240 mm water cooling on the top panel (while maintaining a memory module height limit of 46 mm). This allows you to create an efficient and organized system tailored to your needs. Play, work, and more without worrying about your PC overheating.A configuration tailored to youThe interior of the case offers space for a graphics card up to 330 mm long and CPU cooling up to 170 mm high. The C365 is also compatible with E-ATX, ATX, M-ATX, and ITX motherboards and offers 7 expansion card slots. You can also install an SSD or 2 HDDs. Don't worry about running out of space for your files!Convenient access to buttons and portsThe case is equipped with several useful ports – it offers a USB-A 3.0 connector, two USB-A 2.0 connectors, and an HD audio jack. Power and Reset buttons are also available. So you can comfortably use your computer, connect peripherals, listen to music through headphones, and more. Manufacturer DarkFlash Model C365 Case type Mini tower Side panel Tempered glass Motherboard standard E-ATX / ATX / M-ATX / ITX Power supply standard ATX Internal drive bays SSD x1 / HDD x2 Expansion card slots 7 Max power supply length 160 mm Max graphics card length 330 mm Max CPU cooling height 170 mm Max number of fans 7 Fan mounting options Top: 120 mm x2 / 140 mm x2Side: 120 mm x2Rear 120 mm x1Bottom 120 mm x2 Water cooling mounting options Top: 240 mm (with memory module height limited to 46 mm) Number of fans installed No fans installed Fan type No fans installed Buttons and controls Power, Reset Connectors USB-A 3.0 x1, USB-A 2.0 x2, HD Audio Material 0.55 mm SPCC Color White Height 375 mm Width 220 mm Depth 445 mm Weight Approx. 4.6 kg

DarkFlash C365 computer case (black)The DarkFlash C365 is a functional computer case designed for impressive display of components while maintaining a compact size. The column-free design offers a 270° panoramic view, allowing for a full presentation of the interior – for example, components with backlighting. The option to install up to 7 fans allows you to create an efficient cooling system, and compatibility with various motherboards (E-ATX, ATX, M-ATX, ITX), graphics cards up to 330 mm in length, and CPU coolers up to 170 mm in height provides many expansion options.270° panoramic design without a corner profileThe C365 model uses two tempered glass panels that provide a wide 270° view of the interior. The lack of a vertical corner profile makes all components clearly visible, which works particularly well in configurations with RGB lighting. This design allows you to experiment freely with the design – realize your creative ideas and give your computer a unique character!Three-dimensional airflow systemThe C365 is designed for effective component cooling. Large ventilation grilles with numerous openings create a three-dimensional airflow channel that supports effective heat dissipation from inside the case. This solution improves temperature stability even when using demanding components.Create an efficient cooling systemThe DarkFlash C365 allows you to install up to 7 fans or 240 mm water cooling on the top panel (while maintaining a memory module height limit of 46 mm). This allows you to create an efficient and organized system tailored to your needs. Play, work, and more without worrying about your PC overheating.A configuration tailored to youThe interior of the case offers space for a graphics card up to 330 mm long and CPU cooling up to 170 mm high. The C365 is also compatible with E-ATX, ATX, M-ATX, and ITX motherboards and offers 7 expansion card slots. You can also install an SSD or 2 HDDs. Don't worry about running out of space for your files!Convenient access to buttons and portsThe case is equipped with several useful ports – it offers a USB-A 3.0 connector, two USB-A 2.0 connectors, and an HD audio jack. Power and Reset buttons are also available. So you can comfortably use your computer, connect peripherals, listen to music through headphones, and more. Manufacturer DarkFlash Model C365 Case type Mini tower Side panel Tempered glass Motherboard standard E-ATX / ATX / M-ATX / ITX Power supply standard ATX Internal drive bays SSD x1 / HDD x2 Expansion card slots 7 Max power supply length 160 mm Max graphics card length 330 mm Max CPU cooling height 170 mm Max number of fans 7 Fan mounting options Top: 120 mm x2 / 140 mm x2Side: 120 mm x2Rear 120 mm x1Bottom 120 mm x2 Water cooling mounting options Top: 240 mm (with memory module height limited to 46 mm) Number of fans installed No fans installed Fan type No fans installed Buttons and controls Power, Reset Connectors USB-A 3.0 x1, USB-A 2.0 x2, HD Audio Material 0.55 mm SPCC Color Black Height 375 mm Width 220 mm Depth 445 mm Weight Approx. 4.6 kg

Portable Mini Docking Station USB-C 4 in 1 4K HDMI PD 100W. Portable solution supporting multiple HDMI and USB displays Notebook design has evolved steadily over the years. Always lighter, thinner and more agile. Comfortable to carry, convenient to use. However, most trendsetters no longer offer enough ports to connect all peripherals. The Dicota USB-C module is the solution. Enjoy maximum productivity wherever you are. Expand your computer's USB port with the integrated USB-C connector. The mini docking station is equipped with two HDMI graphics outputs. Connect two monitors simultaneously and enjoy 4K resolution (3840 x 2160 @ 30 Hz). The station also offers USB-C Power Delivery ports up to 100 W and USB-A 3.0 ports. It has a lightweight, compact and durable aluminum housing. The device is compatible with Mac, Windows and other USB-C enabled devices. Thanks to the plug and play specification, you do not need any additional device configuration. Mini USB-C docking station Super compact design Allows you to share/enhance your screen on 2 displays 2x HDMI ports with up to 4K resolution 1x USB-A port, 1x USB-C port Power delivery up to 100W Short USB-C connection cable (fixed) Aluminum housing for optimal heat exchange

FNIRSI LCR-ST2 LCR TesterWorking with electronic components requires a tool that combines accuracy, speed, and ease of use. The FNIRSI LCR-ST2 offers a wide range of measurement capabilities, support for multiple frequencies and test voltage levels, intelligent analysis functions, and two methods for connecting the components under test. A clear color display with automatic image rotation, a compact tweezers-like design, and a rechargeable battery providing up to approximately 3 hours of operation make this device ideal for both service stations and field work. This versatile tester facilitates the diagnosis of individual components and the batch testing of electronic components.Wide measurement range and comprehensive parameter analysisThe tester enables precise measurements of resistance in the range from 10 mΩ to 10 MΩ, capacitance from 1 pF to 22 mF, inductance from 1 μH to 10 H, voltage up to ±30 V, and diodes with a forward voltage up to 0.7 V. In addition to basic values, the device also displays key electrical parameters such as D, Q, Z, X, θ, and ESR, enabling a comprehensive analysis of the tested component’s properties. Automatic recognition of resistors, capacitors, and inductors further speeds up the process by eliminating the need to manually select the measurement type.Flexible settings for various applicationsThe FNIRSI LCR-ST2 allows you to adjust the measurement conditions to the type of component being tested. Five test frequencies (100 Hz, 120 Hz, 1 kHz, 10 kHz, and 100 kHz) are available, enabling professional analysis of many types of electronic components. Additionally, you can select one of four RMS test voltage levels (0.1 V, 0.3 V, 0.6 V, or 1.0 V) to increase measurement stability and accuracy depending on the characteristics of the component under test.Intelligent Features to Speed Up DiagnosticsThe device is equipped with a full-band scanning mode ranging from 100 Hz to 100 kHz, which enables rapid analysis of a component’s frequency response with a single measurement. The tester also offers an intelligent function for sorting components according to specified nominal values and tolerances, automatically classifying them as compliant or non-compliant with requirements during mass production testing. An additional advantage is the simultaneous display of equivalent values in series and parallel configurations, which helps minimize the impact of parasitic parameters and increases the accuracy of the results. The practical HOLD, Max, and Min functions allow you to conveniently record and analyze measurement results. The device also enables the simultaneous display of two measurement parameters, which facilitates the analysis of results.Two Measurement Methods and Ease of UseThe LCR-ST2 model combines a tweezers design with the option to use a Kelvin probe. Straight and curved probe tips make it easy to grip small surface-mounted components, while the Kelvin clamp enables precise four-wire measurements of larger components and through-hole components. User comfort is enhanced by a 1.47-inch HD color display with an auto-rotate feature that adjusts the orientation to match how the device is held, ensuring comfortable operation for both right- and left-handed users. The magnetic mount makes it easy to store the tester and keeps it within easy reach at all times.Mobile, ready-to-use designThe lightweight, tweezers-style housing makes the tester ideal for use in the lab, in service, and in the field. The built-in 300 mAh lithium battery provides up to approximately 3 hours of continuous operation, and the modern USB-C port allows for convenient charging of the device. Additionally, the tester supports voltage measurements up to ±30 V, making it suitable for both everyday diagnostics and more advanced electronic applications.Included LCR tester storage case curved probe shorting plate data cable user manual Manufacturer FNIRSI Model LCR-ST2 Standby time approximately 3 hours Display 1.47" HD Weight approxim

FNIRSI DSO510 portable mini 2-in-1 oscilloscope signal generatorThe FNIRSI DSO510 is a portable 2-in-1 oscilloscope and signal generator with a 10 MHz bandwidth that combines compact size with advanced functionality. The device offers intelligent functions such as automatic adjustment, surge protection, trigger level display and image recording capability. With its adjustable glow, it enables efficient tracking of transients, and supports stopping, zooming and panning of waveforms for precise analysis. The built-in generator offers 13 waveforms, supporting learning and testing. The compact size and foldable stand provide convenience in any environment. The device works well in measuring line voltage, pulse signals and other waveforms. Long operating time is guaranteed by a 1000 mAh battery, charged via a USB-C port. It is an excellent choice for both professionals and electronics enthusiasts.Smart features for maximum precisionThe DSO510 oscilloscope offers a number of smart features that support efficient signal detection - from auto-adjustment to trigger level display to a 1 kHz rectangular waveform calibration function. With image storage, burn-in protection and a software update option via the USB-C port, the device guarantees reliable performance and readiness for future enhancements. With an adjustable afterglow function (Afterglow: off, 500 ms, 1 s, ∞), the device enables smooth tracking of dynamic signals. This is an ideal tool for analyzing transient phenomena and capturing even the smallest changes in waveforms.Advanced waveform analysisThe DSO510 supports stopping, zooming and shifting waveforms, allowing in-depth analysis of even the most complex signals. The device is perfect for detecting hidden interference and analyzing complex modulations.Signal generator with 13 waveformsThe built-in signal generator offers 13 adjustable waveforms, making it an extremely useful tool for learning how to use oscilloscopes and experiments. It is an excellent support for beginners and a practical addition for professionals.Thoughtful designThe DSO510 fits easily in the palm of your hand - its ultra-thin, lightweight design frees you from the problem of bulky equipment. The folding stand that can be adjusted to a 90° angle allows convenient hands-free operation. Thanks to its robust design and high-sensitivity buttons, operation is simple and intuitive. In addition, powered by a built-in 1,000 mAh lithium-ion battery, the DSO510 provides long runtime with an automatic shut-off function when not using the tool. Charging and software updates are conveniently done via the USB-C connector.Included mini oscilloscope probe with crocodile clip charging cable lanyard for carrying adapter P6100 probe user manual Manufacturer FNIRSI Model DSO510 Bandwidth 10 MHz Sampling frequency 48 Ms/s Time base range 50ns - 20s Measuring values 12 types Trigger mode Automatic, single, normal Voltage measurement range 400 V Calibration square wave 1KHz Supported Glow function Supported Image recording Supported Trigger level display Supported Frequency 0-50 KHz Duty cycle 0-100% Amplitude 0.1-3V Waveform 13 types

Digital Display Laser Inclinometer   Features:  High precision angle measuring tool. The inclinometer has become an indispensable and important measuring tool in the fields of bridge, railway paving, civil engineer, construction, decoration, industrial automation, intelligent platform, machining and so on. Bidirectional laser scanning. The bright (Class 2) laser point of the meter will be easily noticeable in both light and dark hours of the day, making it easy to measure the required data. Magnetic pressure seat: five sides of the device are magnetic. Clear illuminated display with battery level indicator. Rechargeable lithium-ion battery, convenient charging via USB Type-C interface. Charging cable is included. Compact shape, easy to use, durable body. Warning: laser radiation - avoid direct eye exposure.  Functions:  Zero point measurement based on horizontal plane. Angle locking function. Relative/absolute angle measurement. Battery level indicator. With data storage function.  Technical data:  Measurement range: 4x 90°. Measurement accuracy +/- 2°. Measurement resolution: 0.02. Sensor type: 6 axis sensor. Laser class: II, 630-670nm. Laser color: red. Power supply: rechargeable lithium-ion battery 3.7V 390mAh. Operating temperature: 0°C ~ +50°C. Automatic device switch-off: 30 min. Material: ABS, magnet. Size: 60x60x30mm. Weight: 118 g.  Warranty: 24 months.  The set includes: inclinometer, built-in battery, charging cable USB Type-A to USB Type-C, user manual.  

Habotest HT625B anemometerHT625B is a functional and compact anemometer with high sensitivity. It is equipped with an 8-blade rotor and HD color display. It requires 3 AAA 1.5V batteries to power it. It allows you to take measurements in different units. You can also connect it to a computer via a USB cable for real-time data management.Precise measurement of various parametersThis multifunctional anemometer accurately measures not only air velocity, air volume (CFM, SMM, CMS) and humidity, but also air temperature, wet thermometer and dew point. It also allows you to take average measurements. You gain access to individual functions and settings by pressing specific buttons. Habotest meets the expectations of users around the world. The ability to change the unit of measurement will allow you to adapt the device's operation to your needs and habits. Available options include m/s, km/h, miles/h, ft/s and even knots. The device is distinguished by its high sensitivity and responsiveness of 0.5 seconds.Ease of useOperation of the HT625B is surprisingly simple. The device features practical buttons such as an on/off switch and a function toggle key, as well as buttons that allow you to select the parameter unit and the value you want the device to calculate (minimum / maximum / average) and a button that allows you to store data. The anemometer also has an 8-blade rotor with a bearing sensor, a high-resolution color screen and a USB port.Convenient access to informationThe anemometer is equipped with an easy-to-read HD color display that can display units with a maximum value of 9999. It provides convenient access to the most important information related to the operation of the device. It allows you to quickly check not only the measurement results, but also the battery status, for example. You can also gain more convenient access to data and manage it in real time - the HT625B can be connected to a laptop or computer via USB. Take advantage of this opportunity to work even more comfortably, yet efficiently.Practical, portable, convenient to useHT625B is not only functional, but also lightweight and handy. Using it is extremely comfortable. It fits perfectly in the hand and does not cause discomfort. Its transportation will not cause you any problems either - it measures only 197 x 60 x 33 mm, so you can easily fit it into your bag and take it wherever you need it. The product will be great for meteorology, industry, hydrology and urban environments, among others. It will also be useful for those involved in environmental protection.Included: Digital anemometer x1 AAA 1.5V battery x3 User manual x1 Manufacturer Habotest Model HT625B Air velocity measurement range, resolution and accuracy 0.4-30 m/s: 0.01, ±(2%+0.5 m/s); 1.40-108 km/h: 0.01-0.1, ±(2%+1.8 km/h); 1.30-98.50 ft/s: 0.01, ±(2%+1.6 ft/s); 0.80-58.30 knots: 0.01, ±(2%+1.0 knots); 0.90-67.10 mph: 0.01, ±(2%+1.1 mph); 78.00-5900 ft/m: 0.01-0.1, ±(2%+10 ft/m) Air volume measurement range, resolution 0-9999 CFM (CMM, CMS), 0.01-0.1 Display 9999 counts Temperature, resolution, accuracy -20°C-60°C (-14°F-140°F), 0.1, ±1.5°C Dew point temperature, resolution, accuracy -20°C-60°C (-4°F-140°F), 0.1, ±1.5°C Wet thermometer temperature, resolution, accuracy -50°C-60°C (-58°F-140°F), 0.1, ±1.5°C Humidity, resolution, accuracy 0-99%, 0.1, ±4°C USB Yes Air channel area settings Yes Data storage Yes MAX/MIN/AVG Yes Automatic shutdown Yes Low battery indicator Yes Power supply 3x AAA 1.5V battery (included) Weight Approximately 180 g Dimensions 197x60x33 mm , Anemometr Habotest HT625BHT625B to funkcjonalny i kompaktowy anemometr o wysokiej czułości. Został wyposażony w 8-łopatowy wirnik oraz kolorowy wyświetlacz HD. Do jego zasilania potrzebne są 3 baterie AAA 1,5 V. Umożliwia dokonywanie pomiarów w różnych jednostkach. Możesz też podłączyć go do komputera za pomocą kabla USB, aby w czasie rzeczywistym zarządzać danymi.Precyzyjny pomiar różnych parametrówTen wielofunkcyjny anemometr pr

FNIRSI LCR-ST2Plus LCR TesterThe FNIRSI LCR-ST2Plus enables the measurement of electrical parameters of components and offers a wide range of applications for both equipment maintenance and the design of new circuits. It offers measurements at multiple frequencies and test voltage levels, intelligent component recognition, and features that streamline the testing of individual components and entire production batches. Its compact, tweezers-like design, easy-to-read color display, and up to 3 hours of operation on a single charge make the device ideal for both laboratory settings and field work.Wide Measurement Range and Comprehensive Parameter AnalysisThe FNIRSI LCR-ST2Plus allows for precise measurement of resistance in the range from 10 mΩ to 10 MΩ, capacitance from 1 pF to 22 mF, inductance from 1 μH to 10 H, voltage up to ±30 V, and diodes with a forward voltage up to 0.7 V. In addition to the basic values, the device also displays a range of parameters describing the behavior of the tested component, such as D, Q, Z, X, θ, and ESR. This allows for a much more accurate assessment of component properties and their suitability for specific applications, without the need to use several different measuring instruments.Flexible settings for even greater accuracyThe tester offers five measurement frequencies (100 Hz, 120 Hz, 1 kHz, 10 kHz, and 100 kHz), allowing you to select the optimal test conditions for the type of component being tested. Four RMS test voltage levels (0.1 V, 0.3 V, 0.6 V, and 1.0 V) are also available, allowing you to increase the stability and precision of measurements for various components. An additional advantage is the simultaneous display of equivalent values for series and parallel connections, which minimizes the impact of parasitic parameters and improves measurement accuracy when testing resistors, inductors, and capacitors.Smart features to streamline daily workThe LCR-ST2Plus is equipped with a full frequency sweep mode ranging from 100 Hz to 100 kHz, which allows you to analyze the frequency response of the component under test with a single command. The smart sorting feature automatically compares results with predefined nominal values and tolerances, instantly classifying components as pass or fail. This solution significantly speeds up testing of larger batches of components and reduces the risk of errors.Convenient Component TestingThe device is designed to accommodate various types of components. The kit includes straight and curved tweezers-style test probes that facilitate the handling of small SMD components. For larger components and through-hole components, a lead terminated with a Kelvin clamp is provided, utilizing a four-wire measurement method that ensures high accuracy. The tester automatically recognizes resistors, capacitors, and inductors, and simultaneously displays the two most important parameters of the tested component on the screen. You also have access to the HOLD, Max, and Min functions, as well as the ability to customize system settings to your preferences.Easy-to-read screen and ergonomic designThe 1.47-inch HD color display provides a clear presentation of measurement results, making it easy to read data both in the workshop and in the field. Automatic screen rotation adapts to how you hold the device, ensuring comfortable use for both right- and left-handed users. The device is equipped with a magnetic attachment for easy storage and quick access while working.Mobility, Safety, and Readiness for UseThe compact, tweezers-style housing means the tester fits easily in a pocket or tool bag, so you always have it on hand. The built-in 300 mAh lithium battery provides up to approximately 3 hours of continuous operation, and the modern USB-C port allows for convenient charging. The device also supports voltage measurement up to ±30 V and is equipped with safety features that enhance the safety of the tests performed, allowing for comfortable work with a wide range of elec

The multi-port USB-C 5Gbps AXAGON HMC-6GLN GLASS 6in1 hub expands your laptop, computer or phone with six ports. You connect your laptop to the hub via a 20 cm long USB-C cable. You immediately have a connection for a monitor, three USB devices and an RJ-45 connector for a Gigabit Ethernet network. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will provide you with a simple and compact 6in1 docking station for modern laptops. The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate is up to 5Gb/s thanks to USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD or 1080p/240Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. The compact aluminum body not only looks great, but also provides mechanical durability and passive cooling. The glossy upper part with a decent backlit logo underlines the premium look of the hub. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running.  For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3, 4 and above) and Power Delivery powered. The hub can easily connect to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (computer, tablet or phone connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 10Gbps, USB4, Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (tablet, phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD.  Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. To achieve maximum resolution and frequency values on video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) s