Mini Display USB C

UNI-T UT658DUAL USB socket tester UNI-T UT658DUAL is a second-generation USB tester that allows you to comprehensively analyze chargers, cables and devices powered by USB Type A and Type C ports. With it you can not only check voltage and current parameters, but also measure actual power consumption, capacity of charged devices and circuit resistance. This is an indispensable tool for engineers, electronics engineers, equipment testers and home users who want to have full control over the quality and performance of their equipment. Full picture of charging parameters The UT658DUAL displays all key information on an easy-to-read screen: voltage, current, power, capacity, energy consumption and circuit resistance value. It supports voltages from 4 to 24 V DC and current up to 3 A for USB-A port and up to 5 A for USB-C, allowing it to test even the most demanding chargers and powerbanks. The device also recognizes QC 3.0 (for USB-A) and QC 4.0 (for USB-C) fast charging protocols, making it a universal tester for modern mobile devices. Precision and measurement memory The tester can store up to 10 sets of data, making it easy to compare measurement results under different conditions and with different devices. Battery capacity measurement is possible with a resolution of 1 mAh (up to 99999 mAh), and energy is recorded up to 1000 Wh. The maximum recording time is as long as 99 hours 59 minutes 59 seconds - ideal for long-term load and comparison tests. Easy to use, ready for action The UT658DUAL is powered directly from a USB port and requires no additional batteries. Its compact size and lightweight design (65.8 g) make it extremely portable and easy to transport. Thanks to its single-screen display system and intuitive operation, it will work well in laboratory conditions as well as during service or home tests. Included UNI-T UT658DUAL USB tester User manual (English) Manufacturer UNI-T Manufacturer code UT658DUAL Certifications CE, UKCA Supported connectors USB Type-A, USB Type-C Voltage range 4-24 VDC, resolution: 0.01 V Current range (USB-A) 0.05-3 A DC, resolution: 0.01 A Current range (USB-C) 0.05-5 A DC, resolution: 0.01 A Capacity 0-99999 mAh, resolution: 1 mAh Energy Up to 1000 Wh Circuit resistance 1-480 Ω Voltage measurement on D+/D- lines 0-3,3 V Fast charging protocol QC 3.0 (USB-A), QC 4.0 (USB-C) Recording time Up to 99 h 59 min 59 s, resolution: 1 s Data recording 10 sets Power supply from USB port Case color white Net weight 65,8 g Dimensions 93 × 55 × 13 mm

Trimo Pro – multifunctional hair clipper An elegant, functional grooming tool that combines precision and modern design. With the highest quality blades and accessories, it ensures professional results - precise cutting and easy styling. Easy-to-read LED display The white LED display shows basic information such as battery level and operating time. 6 versatile accessories Micro-shaving – precision for sensitive areas. Precision trimming – ideal for beards, eyebrows and fine details. Ear/nose trimming is a safe and effective hair removal. Body/Intimate – gentle trimming for large or sensitive areas. Style – creatively style your beard or hair. Full-length haircut – Fast and precise haircut. 4 trimmer attachments 3 mm – for precise, short trimming. 6 mm – medium length, natural looking. 9 mm – suitable for longer, voluminous styles. 12 mm – free styling for long hair. Magnetic accessories Magnetic attachments allow for quick and secure attachment for easy replacement and accurate results. Precision knives Sharp, precise blades guarantee an even cut without stretching, making styling quick and convenient. IPX7 Water resistance Fully waterproof for safe use in the shower and easy cleaning under running water. USB-C charging Modern USB-C charging ensures fast, universal power-up, and the trimmer is ready when you need it. Manufacturer Manta Type Hair and beard trimmer Mains operation No Battery operation Yes Number of bits 6 Battery charging time (min.) 90 Battery life without mains power (min.) 90 Precision trimmer Yes Washable blades Yes Waterproof Yes Cleaning brush Yes Styling comb Yes Mower width (mm) - Number of length settings 4 Accuracy (step size) mm - Length setting range 3mm - 12mm Special notes Includes USB-C charging, magnetic tips, several accessories, and a device stand.

functions Made of ECO materials: 35% wheat straw fiber and 65% ABS Two QC 3.0 USB and Type-C PD 3.0 ports help you charge 3 devices quickly The digital display shows the battery level accurately Fast charges a compatible iPhone from 0% to 50% in 30 minutes - when used with MFi Type-C to Lightning cable (not included) Technical data Battery: Lithium polymer Capacity: 10000mAh Micro-USB input: 5V/2A, 9V/2A, 12V/1.5A Type C input (PD 3.0): 5 V / 3 A , 9 V / 2 A , 12 V / 1.5 A (18 W) Type C output (PD 3.0): 5 V / 3 A , 9 V / 2 A , 12 V / 1.5 A (18 W) USB A output 1/2 (QC3.0): 5V/3A, 9V/2A, 12V/1.5A Total output: 3A Total output power: 18W Fast charging time: 3-4 hours with 18W power charger + Type-C to Type-C cable (not included) Protection functions: short circuit, overload, overload, over current Material: ABS + wheat straw Dimensions: 135 x 68 x 18 mm Weight: 230g Color: cream Compatibility: Universal Compatible PD devices: iPad Pro 12.9'', iPad Pro 10.5'', iPad Pro 11'', iPhone 13 mini/ 13/ 13 Pro/ 13 Pro Max/ iPhone 12 mini/ 12/ 12 Pro/ 12 Pro Max/ SE/ iPhone 11/ 11 Pro/ 11 Max/ XR/ X/ XS Max/ XS/ 8 Plus/ 8, Samsung S21 Ultra/ S21+/ S21/ Samsung S20 Ultra/ S20+ /S20, Samsung S10+/ S10/ S10e, Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3

Shavio – hair and beard shaver An elegant and efficient tool for precise grooming. With premium blades, convenient accessories and a stylish look, it ensures professional results for both hair and beard. LED screen The white LED display shows basic information, including battery level and runtime. 5 tips for versatility Includes 5 specialized tips: The tip of the head is for a precise shave. Nose tip – for safe removal of nose hair. 2 Facial Tips – for cleansing the face. All-in-one mower for versatility. 3 trimmer attachments 3 mm – for short styles. 5mm – for medium length hair. 7mm – for longer cuts and volumes. Precision knives Sharp, precise blades ensure a smooth, drag-free cut for quick and convenient styling. IPX7 Water resistance Completely waterproof, designed for use in the shower and easy to clean under running water. USB-C charging Fast and convenient USB-C charging ensures flexibility and quick power-up. Easy to clean The blades are removable for easy cleaning under water, ensuring hygiene and long-lasting performance. Manufacturer Manta Type Hair and beard trimmer Mains operation No Battery operation Yes Number of bits 5 Battery charging time (min.) 90 Battery life without mains power (min.) 90 Precision trimmer Yes Washable blades Yes Waterproof Yes Cleaning brush Yes Styling comb Yes Mower width (mm) - Number of length settings 3 Accuracy (step size) mm - Length setting range 3/5/7mm Special notes Includes USB-C charging, LED display, and multiple accessories (head, nose, two face tips)

FNIRSI FDM01 noise decibel meterThe FNIRSI FDM01 is a compact decibel meter that combines the function of measuring noise in the range of 30-130 dB with simultaneous monitoring of temperature and humidity. The device features a sensitive condenser microphone, a 2.3″ VA color display with backlight, and a rechargeable lithium battery (600 mAh) charged via USB-C. With its fast response time, MIN/AVG/MAX measurement modes, light alarm, and two detection modes (FAST/SLOW), the FDM01 FNIRSI will prove useful in the office, construction site, transportation, production rooms, and public spaces.Precision measurement microphoneThe 6mm condenser microphone used is characterized by high sensitivity and fast response time. The use of nickel-plated steel, a three-layer conductive structure and silicone seals effectively isolates interference and ensures reliable results even with sudden volume spikes. The FNIRSI FDM01 decibel meter allows you to choose between fast (1 sec) and slow (1.25 sec) measurement modes. This allows you to choose how to record data for dynamically changing conditions or to get a more stable result for fixed noise sources.Measurement in A-weighting modeThe device uses the A-weighting characteristic, which corresponds to the human ear's sensitivity to different frequencies. The measurement is made in the range of 31.5 Hz - 8.5 kHz, making it possible to reliably assess environmental noise levels according to standards.Light alarm and value lockThe FDM01 indicates when the set sound threshold is exceeded via a red alarm light. It is also possible to display only the minimum, average or maximum value, making it easier to document the results. The "HOLD" function allows you to keep the current reading on the screen.Easy-to-read screen and durable housingThe 2.3-inch VA display clearly presents all data even in bright environments. ABS plastic housing and silicone buttons enhance the device's durability in field and industrial conditions. The soft wind shield design reduces the impact of ambient noise on the measurement. A 600 mAh lithium battery eliminates the need for batteries. The device is charged via a USB-C port, simplifying operation and reducing cost of ownership.Included: FNIRSI FDM01 decibel meter Charging cable Manufacturer FNIRSI Model FDM01 Accuracy ±1.5 dB (based on NV sound source 94 dB @ 1 kHz) Frequency range 31.5 Hz - 8.5 kHz Dynamic range 3.50 dB Measurement range 30-130 dB Frequency weighting characteristics A curve Digital display 4 digits, resolution 0.1 dB, reading frequency 2 times/sec. Dynamic scale (display) 1 division = 2 dB, reading frequency 2 times/sec. Dynamic scale range 30-130 dB Overload indication "OVER" or "UNDER" symbol Dynamic characteristics FAST (fast), SLOW (slow) Microphone 6 mm condenser microphone Retention of maximum value MAX Rechargeable battery 600 mAh / 3.7 V (rechargeable lithium battery) Operating temperature and humidity 0°C - 40°C, 10% - 80% RH Storage temperature and humidity -10°C - 60°C, 10% - 70% RH

Trimo – hair clipper A stylish, functional tool that combines precision and modern design. With premium blades and convenient accessories, it delivers professional results for everyday grooming. Ideal for precise trimming and easy styling. Easy-to-read LED display The white LED display shows basic information, including battery level, charging status, and blade oil reminder. 8 Accessories The set includes 8 interchangeable combs for cutting lengths: 0.5 mm, 1 mm, 1.5 mm, 2 mm, 3 mm, 5 mm, 7 mm and 9 mm. Adjust the cutting length to your desired style, whether it's short or a little longer. Precision knives Sharp, precise blades ensure an even cut with minimal effort, making styling quick and convenient without pulling hair. IPX7 Water resistance Fully waterproof, the trimmer can be used in the shower and cleaned under running water for added convenience. USB-C charging Equipped with USB-C for fast and easy charging, allowing you to power the device from a variety of sources. Manufacturer Manta Type Mains operation No Battery operation Yes Number of bits 8 Battery charging time (min.) 120 Battery life without mains power (min.) 120 Precision trimmer Yes Washable blades Yes Waterproof Yes Cleaning brush Yes Styling comb Yes Mower width (mm) - Number of length settings 9 Accuracy (step size) mm 0.5 Length setting range 0.5mm - 9mm Special notes USB-C charging, LCD display, universal (body, face, head), precision trimmer, shaver and body trimmer

FNIRSI LCR-ST1 mini smart digital tweezer testerThe FNIRSI LCR-ST1 is a multi-function tweezers meter for testing surface-mount electronic components. It supports resistance, capacitance, inductance, ESR, diode test and circuit continuity measurement. It offers 3 test frequencies (100 Hz, 1 kHz, 10 kHz), test levels of 0.3 V and 0.6 V RMS, and display of additional parameters such as Q, D, Z and X. With its compact design, interchangeable terminals and USB-C interface, the device is ideal for laboratory, service and production applications.Automatic measurement modeThe device automatically recognizes the type of component under test and displays both the main and auxiliary parameters. This solution makes working with multiple components easier and eliminates the need to switch modes manually. The meter supports English and Chinese.Detailed analysisThe FNIRSI LCR-ST1 meter measures not only basic values (R, L, C), but also loss factor (D), impedance (Z), quality factor (Q), reactance (X) and equivalent series resistance (ESR). Such functionality allows for comprehensive component diagnostics. Measurement ranges include capacitance from 1 pF to 22 mF, inductance from 1 µH to 10 H, and resistance from 10 mΩ to 10 MΩ.Screen and operating ergonomicsThe 1.14" HD display presents data in an easy-to-read manner. Intuitive menus, buttons with silicone overlays and a side dial improve operation. In addition, the data storage function allows you to export measurements to an Excel file via USB. The display shows 2 measurement parameters simultaneously, speeding up analysis. The gold-plated tips of the tweezers are interchangeable - the set includes both a classic straight tip and a curved "hook" type. This makes the tool suitable for a variety of applications - including in hard-to-reach places. The built-in magnet allows you to temporarily stick the meter to metal surfaces.Performance and mobilityA 250 mAh rechargeable lithium-ion battery provides long runtime, and charging is via a USB-C port. An automatic shut-off function saves power when there is no activity. The whole device weighs only 41 g, so it is convenient to carry around.Included: FNIRSI LCR-ST1 multi-functional tweezer meter Curved tips (1 pair) Magnetic stand USB cable for charging User manual Manufacturer FNIRSI Model LCR-ST1 Display Color screen 1.14" Charging interface USB Type-C, 5V/1A Power supply 250 mAh rechargeable lithium battery Dimensions 28 × 19 × 150 mm Weight 41 g Capacitance measurement range 1 mF - 22 mF (100 Hz, 1 kHz ±5%)1 µF - 1 mF (100 Hz, 1 kHz, 10 kHz ±2%)1 nF - 1 µF (100 Hz ±2%, 1 kHz and 10 kHz ±0.5%)1 pF - 1 nF (1 kHz and 10 kHz ±2%) Inductance measurement range 1 H - 10 H (100 Hz, 1 kHz ±5%)1 mH - 1 H (all frequencies ±2%)10 µH - 1 mH (100 Hz ±2%, 1 kHz and 10 kHz ±0.5%)1 µH - 10 µH (10 kHz ±2%) Resistance measurement range 1 MΩ - 10 MΩ (100 Hz, 1 kHz ±5%)1 kΩ - 1 MΩ (100 Hz, 10 kHz ±1%, 1 kHz ±0.5%)1 Ω - 1 kΩ (all frequencies ±0.5-1%)10 mΩ - 1 Ω (all frequencies ±2%) Diode test Conduction voltage: 0.7 V

FNIRSI DSO152 portable mini oscilloscopeThe FNIRSI DSO152 is a compact oscilloscope designed for mobile service and educational work. Despite its pocket size (99 × 68.3 × 19.5 mm), it offers a full set of features, including 2.5MS/s sampling, 200kHz bandwidth, measurement up to ±400V, and automatic parameter setting. A built-in 1,000mAh battery, 2.8" display, measurements of 8 types of parameters and a software update function will make the FNIRSI DSO152 a versatile tool for field, workshop and laboratory use. The device is used in household appliance service, car repair, teaching and DIY projects.High precision measurementsThe FNIRSI DSO152 oscilloscope offers a true sampling rate of 2.5MS/s and a bandwidth of 200kHz, enabling precise recording of voltage signals up to ±400V. Such a solution works well for measurements in 220V installations, as well as for pulse or power circuit analysis. One-button measurement settings can be automatically selected, eliminating the need for manual calibration. This makes it easier for beginners and reduces setup time for quick diagnoses.Signal calibration and testThe built-in 1kHz rectangular signal source allows quick testing and calibration of the measurement probe, which guarantees repeatability and correctness of measurements without the need for additional equipment.Convenient operationIntuitive operation with responsive buttons and a slider for quick scrolling and changing settings. Navigation through the functions is done efficiently and without the need to reach for the manual. The device fits in the palm of your hand and weighs just 100 grams, making it easy to transport and allow use in hard-to-reach places. The integrated leg allows you to position the oscilloscope at a 90° angle and work hands-free. The oscilloscope features a USB-C port that supports both 5V/1A charging and software updates. This allows you to use universal cables and chargers.Included: FNIRSI DSO152 portable mini oscilloscope Probe with crocodile clamps Charging cable User manual Manufacturer FNIRSI Model DSO152 Sampling frequency 2.5MS/s Bandwidth 200kHz Vertical sensitivity 10mV/Div-20V/Div (stepped according to the 1-2-5 circuit) Voltage range X1: ±400V (Vpp: 800V)X10: ±40V (Vpp: 800V) Trigger method Auto/Normal/Single Coupling type AC/DC Display 2.8 inches / PPI: 320×240 USB charging 5V/1A Lithium battery capacity 1000 mAh Frequency 1kHz Filling factor 50% Dimensions 99×68.3×19.5 mm Weight 100 g

Cycplus A2 electric pump Be prepared for any circumstance. The Cycplus A2 is a multifunctional device that can act as a pump, powerbank and LED flashlight. It is equipped with a powerful rechargeable battery and offers a maximum pressure of 150 psi. It also comes with a ball pump nozzle, a bike mounting bracket and a carrying bag. Practical pump The A2 inflator provides a maximum pressure of 150 psi and an air flow of 12 l/min. This allows you to inflate a bicycle tire (700x25C) in just about 90 seconds! The kit also includes a nozzle for inflating balls. You can also set the target pressure and monitor its value in real time on the built-in display. Powerful battery The A2 is equipped with a high-performance dual-cell battery (2x 2600 mAh). This makes it stand out for its long operating time on a single charge. Now you can easily inflate a car tire about 3-4 times, a mountain bike tire about 12-18 times, and a basketball about 35-40 times. Your inflator won't discharge too quickly! What's more, the charging time of the product is only about 2 hours - you don't have to wait long. Additional capabilities The built-in rechargeable battery makes the A2 pump can act as a powerbank. Now you can easily charge your phone in almost any situation! The device is also equipped with LED lighting, so you can successfully use it as a flashlight. Now you can easily carry out a minor repair on the side of the road or light your way after dark! Lightweight, compact, portable The pump weighs only 380 g, and its dimensions are 180 x 55 x 53 mm. Thanks to this, its transportation will not cause you any problem - you can always have it with you. In addition, the included handle allows you to conveniently attach the device to the bicycle frame. Take advantage of this opportunity to have it at your fingertips during your next trips! Included Pump Air hose Valve converter Ball pump nozzle Bike mounting bracket Carrying bag Screwdriver Screw x2 USB-C charging cable