Monitor 200 Hz

SONOFF MINI-ZBDIM-E ZigBee smart wall switch/dimmerSONOFF MINI-ZBDIM-E is a smart switch operating in the ZigBee 3.0 standard, designed for smooth lighting control in the range of 0–100%. It allows you to create scenes, schedules, and monitor energy consumption. Thanks to the ZigBee router function, it not only controls the light, but also amplifies the signal throughout the smart home network, improving its stability.Stable ZigBee 3.0 communication and router roleThe device operates in the IEEE 802.15.4 (ZigBee 3.0) standard and acts as a router in the network. This means that it transmits the signal further, increasing the range and reliability of communication between devices. This is especially important in larger apartments and houses, where the signal has to pass through several rooms. The switch works with eWeLink gateways such as ZBBridge-P, ZBBridge-U, NSPanel Pro, and iHost. It can also be integrated with Home Assistant via ZHA or Zigbee2MQTT using SONOFF series dongles.Smooth dimming and comfort of useMINI-ZBDIM-E allows you to adjust the brightness in the full range from 0 to 100%, allowing you to precisely adjust the light to the situation. In addition, the trailing-edge dimming increases compatibility with modern light sources and reduces flickering. The device also supports automatic calibration, making it easier to adjust to a specific load.Wide lighting compatibilityThe dimmer works with various types of light sources. It supports dimmable LEDs up to 200 VA, traditional and halogen bulbs up to 400 W, and dimmable electronic transformers up to 200 W. This makes it suitable for use in most home lighting installations. Note: the product is not intended for fluorescent lamps, LED strips, or inductive loads such as fans.Energy consumption monitoringThe built-in power measurement function allows you to control the current energy consumption of the connected lighting. In the app, you can check the current operating parameters, which facilitates conscious energy management and adjustment of the brightness level to real needs.Scenes, schedules, and voice controlThe device allows you to create smart scenes and schedules that automatically adjust lighting to the time of day or other events in the system. You can set the lights to dim automatically in the evening or turn on at a specific time. Voice control is also possible using Amazon Alexa or Google Assistant, as well as remote management from the eWeLink app.Safety and durabilityThe device is equipped with protection against overheating, overload, and overcurrent. The housing is made of flame-retardant PC material, and the entire device complies with CE and RoHS standards. The relay used is designed for long and stable operation, which translates into greater reliability in everyday use.Standard installation and compact dimensionsThe dimmer is designed for use in 220-240 V ~ 50 Hz installations and requires a neutral wire. It fits 86-type boxes and European round boxes with a diameter of 60 mm. The compact design facilitates installation in both new installations and when upgrading existing equipment.Included in the set smart switch 4 screws user manual Manufacturer Sonoff Product name Orb-ZBDIM Model MINI-ZBDIM-E Housing material PC Wi-Fi Wi-Fi IEEE 802.15.4 Operating temperature -10°C~40°C Rated voltage 220–240 V ~ 50 Hz Rated power max. 400 W MCU EFR32MG21 LED 200VA Dimensions 86 x 86 mm ,

functions Built-in speaker Built-in microphone Heart rate measurement Blood pressure measurement Blood oxygen measurement Step counter Calorie counter Sleep monitoring Full touch screen Music management Remote lock Incoming call notifications Phone app notifications "Find Phone" feature. Chronometer Timer There are several dials to choose from Hydration message Notice of suspension Do not disturb mode Signaling Weather information Technical data Connectivity: Bluetooth Connections: magnetic System compatibility: iOS 9.0+ / Android 4.4+ GPS: Yes Water resistance class: IP67 Strap material: silicone Body material: plastic Case width: 4.5 cm Body height: 4.5 cm Case thickness: 1 cm Wrist circumference: 12.5-19.5 cm Dimensions: 7.2 x 3 x 28 cm Screen size: 1.32 inches Screen resolution: 360x360 px RAM: 64KB Integrated memory: 64 MB Processor clock frequency: 80000 Hz Battery type: Li-Poly Battery capacity: 200 mAh Sensors: Accelerometer Pedometer Heart rate monitor Gyroscope Operating system: proprietary Wireless charging: Yes Data transfer: no Menu language: PL, EN, DE, RU, ES, IT, FR, RO, PT, GR, TR, CN, NL, TH

Shelly 1L Gen3 WiFi 1-channel lighting controller without neutralThe Shelly 1L Gen3 is an advanced 1-channel lighting controller that works without a neutral wire, so it fits almost any electrical installation - even older ones. With Wi-Fi and Bluetooth connectivity, scheduling features, support for automation and overheating protection, it's the perfect solution for remote lighting control. The Shelly 1L Gen3 is an ideal choice for those upgrading their installation, owners of older homes, as well as for those who want to intelligently manage their lighting without costly modifications. With Shelly 1L Gen3, you gain full control of your light - conveniently, securely and wirelessly.Full compatibility with any installationShelly 1L Gen3 is the perfect solution for upgrading older electrical systems. The device works without the need to connect a neutral wire, allowing it to be installed in almost any flush-mounted box, including those with limited space. This is especially useful when upgrading an existing installation without costly renovation.No hub, no restrictionsConnect the Shelly 1L Gen3 to your home Wi-Fi network and gain instant access to lighting control from the Shelly Smart Control app, all without the need for an additional hub. Bluetooth makes it possible to pair the device quickly, and the controller itself can also act as a Bluetooth gateway, extending the range for other devices. It's a convenience that any user will appreciate. You'll also find a dedicated Bypass Shelly included, which eliminates blinking LED flashes.Create schedules and scenesSchedule the lights to turn on and off according to your daily routine or day and night rhythm - the device allows you to create schedules based on sunrise and sunset times. You can also configure your own scenarios and local actions, such as turning on lights when you open the door or come home.Support for automation and securityThe Shelly 1L Gen3 supports advanced automation protocols, including HTTPS, MQTTS, Web Sockets and the ability to write custom scripts. A built-in temperature sensor protects the device from overheating, ensuring safe use. All this without investing in additional control panels.Multiple ways to integrateThe device integrates with many home automation systems, including Alexa, Home Assistant and others. This allows you to control the light by voice or from your favorite app, regardless of the platform you choose. No matter which method you prefer - Shelly will adapt to you and your preferences.Wi-Fi controller and amplifier in oneThe 1L Gen3 also acts as a Wi-Fi repeater, boosting the signal in your home, as well as a Bluetooth gateway, improving connectivity with other smart devices. It's more than just a controller - it's a hub for smart lighting management.Additional solutions and free appShelly Smart Control is a free app available on Android, iOS and in your browser that allows you to manage your space, monitor energy consumption and create schedules. You can also upgrade to the premium version and get even more features.Included 1-channel controller Bypass Shelly user manual Manufacturer Shelly Model 1LGen3 Dimensions 37 x 42 x 16 ± 0.5 mm Weight 24 g Maximum tightening torque of screw terminals 0.4 Nm Cable cross section 0.2 to 2.5 mm² Length of stripped wire 6 to 7 mm Mounting method In the wall Housing material Plastic Housing color Cyan Clamp color Black Operating temperature -20 °C to 40 °C Storage temperature 10 °C to 40 °C Humidity 30 % to 70 % RH Maximum altitude 2000 m Power supply 220-240 V~ 50 Hz (Shelly Bypass required) Shelly bypass Included Power consumption < 1.2 W Min. load without neutral wire and without Shelly Bypass No (Shelly Bypass is required for load at O), for all LED lights. Bypass not required for incandescent lamps External protection 10 A, trip characteristics B or C, rated interrupting value 6 kA, energy limit class 3 Max. switching voltage 240 V~ 50 Hz Max. switching power 200 W Temperature sensor Built-in Wi-

functions Built-in speaker Built-in microphone Heart rate measurement Blood pressure measurement Blood oxygen measurement Step counter Calorie counter Sleep monitoring Full touch screen Music management Remote lock Incoming call notifications Phone app notifications "Find Phone" feature. Chronometer Timer There are several dials to choose from Hydration message Notice of suspension Do not disturb mode Signaling Weather information Technical data Connectivity: Bluetooth Connections: magnetic System compatibility: iOS 9.0+ / Android 4.4+ GPS: Yes Water resistance class: IP67 Strap material: silicone Body material: plastic Case width: 4.5 cm Body height: 4.5 cm Case thickness: 1 cm Wrist circumference: 12.5-19.5 cm Dimensions: 7.2 x 3 x 28 cm Screen size: 1.32 inches Screen resolution: 360x360 px RAM: 64KB Integrated memory: 64 MB Processor clock frequency: 80000 Hz Battery type: Li-Poly Battery capacity: 200 mAh Sensors: Accelerometer Pedometer Heart rate monitor Gyroscope Operating system: proprietary Wireless charging: Yes Data transfer: no Menu language: PL, EN, DE, RU, ES, IT, FR, RO, PT, GR, TR, CN, NL, TH

Shelly 2L Gen3 WiFi 2-channel lighting controller without neutralThe Shelly 2L Gen3 is an advanced 2-channel lighting controller that works without a neutral wire, so it fits almost any electrical installation - even older ones. With Wi-Fi and Bluetooth connectivity, scheduling features, support for automation and overheating protection, it's the perfect solution for remote lighting control. The Shelly 2L Gen3 is an ideal choice for those upgrading their installation, owners of older homes, as well as for those who want to intelligently manage their lighting without costly modifications. With Shelly 2L Gen3, you gain full control of your light - conveniently, securely and wirelessly.Full compatibility with any installationThe Shelly 2L Gen3 supports devices up to 200 watts at output terminal 1 and up to 700 watts at output terminal 2. It's the perfect solution for upgrading older electrical systems. The device operates without the need for a neutral wire, allowing it to be installed in almost any flush-mounted box, including those with limited space. This is especially useful when upgrading an existing installation without costly renovation.No hub, no restrictionsConnect the Shelly 2L Gen3 to your home Wi-Fi network and gain instant access to lighting control from the Shelly Smart Control app, all without the need for an additional hub. Bluetooth makes it possible to pair the device quickly, and the controller itself can also act as a Bluetooth gateway, extending the range for other devices. It's a convenience that any user will appreciate. You'll also find a dedicated Bypass Shelly included, which eliminates blinking LED flashes.Create schedules and scenesSchedule the lights to turn on and off according to your daily routine or day and night rhythm - the device allows you to create schedules based on sunrise and sunset times. You can also configure your own scenarios and local actions, such as turning on lights when you open the door or come home.Support for automation and securityThe Shelly 2L Gen3 supports advanced automation protocols, including HTTPS, MQTTS, Web Sockets and the ability to write custom scripts. A built-in temperature sensor protects the device from overheating, ensuring safe use. All this without investing in additional control panels.Multiple ways to integrateThe device integrates with many home automation systems, including Alexa, Home Assistant and others. This allows you to control the light by voice or from your favorite app, regardless of the platform you choose. No matter which method you prefer - Shelly will adapt to you and your preferences.Wi-Fi controller and amplifier in oneThe 2L Gen3 also acts as a Wi-Fi repeater, boosting the signal in your home, as well as a Bluetooth gateway, improving connectivity with other smart devices. It's more than just a controller - it's a hub for smart lighting management.Additional solutions and free appShelly Smart Control is a free app available on Android, iOS and in your browser that allows you to manage your space, monitor energy consumption and create schedules. You can also upgrade to the premium version and get even more features.Included 2-channel controller Bypass Shelly user manual Manufacturer Shelly Model 2LGen3 Dimensions 37 x 42 x 16 ± 0.5 mm Weight 28 g Maximum tightening torque of screw terminals 0.4 Nm Cable cross section 0.2 to 2.5 mm² Length of stripped wire 6 to 7 mm Mounting method In the wall Housing material Plastic Housing color Cyan Clamp color Black Operating temperature -20 °C to 40 °C Storage temperature 10 °C to 40 °C Humidity 30 % to 70 % RH Maximum altitude 2000 m Power supply 220-240 V~ 50 Hz (Shelly Bypass required) Shelly bypass Included Power consumption < 1.2 W Min. load without neutral wire and without Bypass No (Shelly Bypass for 1L/2L is required for load in O1), for all LED lights. Bypass is not required for incandescent lamps External protection 10 A, trip characteristics B or C, rated interrupting value 6 kA, energy lim

Meross MSG100HK Smart Garage Door Switch (HomeKit)Use this smart garage door switch to keep your vehicles safe and yourself more comfortable. You can successfully install it on almost any garage door operator system - from older models to the latest ones. Pair it with an app to receive practical notifications. The device is also compatible with smart assistants - including Apple HomeKit and Google Assistant.Meross app - enjoy remote controlUpgrade your regular garage door operator system with this practical switch. When paired with the Meross app, it will provide you with a wealth of useful capabilities. With the remote control function, you can open, close and monitor your garage remotely. You will also receive notifications when the garage door is opened or closed. Do you happen to forget to close the garage? No worries! If it stays open for too long or at bedtime, Meross will let you know.Works with multiple devicesWorried that your garage door operator system is already outdated and MSG100HK won't handle it? Don't be! The device stands out for its huge compatibility - it works with equipment from more than 200 manufacturers and fits as many as 1600 models. It supports both the latest systems and older ones, manufactured as early as the 1990s!Compatible with your smart assistantDo you want additional remote control capabilities for your switch? Or maybe you want to integrate the MSG100HK into your smart home? All of this is possible! The device is compatible with Amazon Alexa and Google Assistant - so you can control it by voice. You can also connect the switch to IFTTT. Want more? Meross MSG100HK also works with Apple HomeKit.Included Smart garage door switch USB adapter or power cable with plug Door sensor with cable Screws x4 Test cable Double-sided adhesive tape User manual Manufacturer Meross Model MSG100HK Input Version 2: 90-240 V~, 50/60 Hz; Version 3/4: 5V ⎓ 1.0A DC. Buttons 1x Reset button LED 1x LED status indicator Dimensions 9.4x4x2.3 cm Power cable length 1,5 m Sensor cable length 7 m Wireless standard IEEE 802.11 b/g/n, 2.4GHz, 1T1R Wireless security Supports 64/128 bit WEP, WPA-PSK/WPA2-PSK (does not support Wi-Fi Enterprise) Certifications EU: CE, RoHS, WEEE; US/CA: FCC, IC, ETL System requirements iOS 13.0 or later, Android 4.1 or later, existing Wi-Fi network Operating temperature 0°C~40°C Storage temperature -40°C~70°C Working environment humidity 10%~90%, non-condensing Humidity of storage environment 5%-90%, non-condensing Application Meross Compatibility Apple HomeKit, Amazon Alexa, Google Assistant, Samsung SmartThings