One Connect kabelis

Compact AXAGON ADSA-FP2A SLIM adapter with USB-A 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-A cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer.  The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-A 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type A male connector. Device support:  SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 20 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-A - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Internal 2.5" box AXAGON RSS-M2SD with SATA interface is designed for SATA M.2 SSDs. The SATA 6G interface will allow the user to enjoy modern M.2 SSDs with a bit rate of up to 6Gb/s. In addition, the internal M.2 box supports other modern functionalities, e.g. TRIM. In the box, SATA M.2 SSDs with a size up to 22x80 mm can be mounted. The box does not limit SSD capacity, and inserted M.2 SSD cards may be of both one-sided and double-sided types. In the operating system, in BIOS (UEFI) and during booting,  the internal box with inserted M.2 card behaves like a standard hard disk. This reduction features both appearance and dimensions of a standard SDD. By inserting the M.2 SSD in the reduction you will easily create a very fast internal 2.5" disk. Input: SATA 6G (SATA III) interface, compatible with SATA 3G (SATA II) and SATA 1.5G (SATA I). 22-pin (7+15) SATA data and power supply male connector to connect the box with the motherboard. To achieve the best possible bit rates, the use of a SATA 6G controller is recommended. Device support: SATA M.2 SSDs. designed for B+M-key and B-key card formats, NGFF 75-pin B-key slot for SATA M.2 drives. Other features: Support of B+M-key or B-key SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support of M.2 drives with a size of 2230, 2242, 2260, and 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with Serial ATA 3.1 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transfer rates as high as 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), bit rates of up to 1.5 Gb/s (150 MB/s). Support of TRIM functionality to limit gradual degradation of the SSD performance over time. SSD/HDD boot support in internal box. Full Plug and Play support. The adapter is supplied from a standard 15-pin SATA power supply connector.   The aluminium body helps to cool  the M.2 SSD. Other data: Internal box dimensions 100 x 70 x 7 mm. Internal box weight 48 g (without M.2 SSD). Supported operating systems: MS Windows 7 / 8 / 8.1 / 10 and later, Windows Server 2008 R2 / 2012 / 2016 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Note: This is solely a hardware reduction, no drivers are installed. Package contains: internal 2.5" SATA box for SATA M.2 SSD, mounting material and a screwdriver, printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with clearly indicated parameters.

Compact AXAGON ADSA-FP2C SLIM adapter with USB-C 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-C cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer.  The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type C male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD,  max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 18 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-C - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Ideal for use with computers, laptops, and Android mobile devices featuring USB Type-C ports and with iPad Pro 2018, Transcend's HUB2C transforms a single USB Type-C port into four Type-A ones, instantly expanding the number of devices you can connect to your Type-C gadget at the same time. Connect accessories such as USB flash drives, keyboards, or mice to your tablet, or USB flash drives to your Android smartphone, and enjoy instant plug-and-play fun!

This cable enables high-quality video and audio conversion from USB-C to HDMI connector for monitor/TV/projector. It works as an external video card with HDMI output.Allows you to expand your existing desktop to two monitors or mirror it to another monitor. It also allows you to work on two different screens simultaneously. Make your working day more fun and comfortable, work on two screens simultaneously. PremiumCord USB-C to HDMI cable 1.8m 4K*2K@60Hz quality aluminum connectorsThis cable enables high quality video and audio conversion from USB-C to HDMI connector for monitor/TV/projector. It works as an external video card with HDMI output.Allows you to expand your existing desktop to two monitors or mirror it to another monitor. It also allows you to work on two different screens simultaneously. Make your working day more fun and comfortable, work on two screens simultaneously.- Video resolution is up to 4K*2K@60Hz, FULL HD 1080p- Enables display mode: Mirror + Extend + Duplicate ( display the same or another screen or one image across two screens )- Support both audio and video output.- Can work on new Macbooks, Chromebooks, Asus Zen AIO and other 2015 Type-C equipped devices.- Compatible for Mac, Windows, tablets, mobile devices (Samsung S8, Note 8, LG G5, etc.)- A separate HDMI cable is required to connect a TV or monitor.- Type C reversible connectors.- 1 x USB Type-C™ male > 1 x HDMI-A 19-pin male- Signal direction: USB Type-C™ input > HDMI output- Resolution up to 4K @ 60 Hz (depending on system and connected hardware), down compatible to 4K 30 Hz.- Supports 3D display, HDCP 1.4 and 2.2- USB bus power, no external power supply required- Plug & Play, support replacement during operation- Metal housing, nickel plated connectors- Black color- Length: 1800 mm.- Works with new devices with USB-C supporting DisplayPort Alternate modesMacbookChromebookAsus Zen AIOMac,Windows,Tablets,Mobile(Samsung S8/S8 plus, Note 8, LG G5, Mate10, LG V300, HTC U Ultra )etc....

Blitzwolf BW-NEW TH8 10-in-1 HUB adapterThe BlitzWolf BW-NEW TH8 is a 10-in-1 adapter that turns one USB-C port into a wide set of capabilities. It is equipped with three USB-A 3.0 ports, two USB-C 3.0 ports, one USB-C PD 100 W charging port, an HDMI 4K@60Hz port, an SD 3.0 card slot, a TF 3.0 card slot and an RJ45 1000 Mbps port. As a result, it offers full flexibility and allows you to greatly increase the functionality of your computer or laptop!Fast Internet connectionThe BW-NEW TH8 adapter enables you to connect to the Internet quickly thanks to its RJ45 port, which offers transmission speeds of up to 1000 Mbps. This means you can enjoy smooth web browsing, efficient downloading of large files, convenient viewing of movies on streaming platforms and even dynamic online gameplay!Streaming video in 4K qualityThe BlitzWolf BW-NEW TH8 is equipped with an HDMI port that supports 4K resolution at 60 Hz, allowing you to display high-quality video on external monitors, projectors or TVs. It's perfect for those who need an expanded workstation or want to enjoy a cinematic experience while watching movies.Fast charging for your devicesThe BlitzWolf BW-NEW TH8 adapter offers support for PD3.0 fast charging technology, allowing connected laptops to renew energy efficiently. So you can comfortably use your devices while powering them up without worrying about power drops.Instant data transferWith USB-C and USB-A 3.0 ports, the BW-NEW TH8 adapter allows you to transfer files at speeds of up to 5 Gbps. This allows you to transfer large videos, documents or photos quickly and efficiently, saving you time and increasing productivity.Simultaneous reading and writing from two cardsThe BW-NEW TH8 offers convenient memory card support, allowing simultaneous use of two media - SD and TF. In addition, read speeds of up to 90 MB/s and write speeds of up to 80 MB/s mean you can quickly transfer large files, photos and documents. This is an ideal option for photographers and web developers!Wide compatibility, plug & play systemThe BlitzWolf BW-NEW TH8 adapter is designed to work right out of the box - no additional drivers to install. What's more, it's compatible with macOS, Windows and Chrome OS, allowing you to quickly and seamlessly extend the capabilities of most popular laptop and computer models. Manufacturer BlitzWolf Model BW-NEW TH8 Color Silver Available ports 3x USB-A 3.0, 2x USB-C 3.0, 1x USB-C PD 100 W for charging, 1x HDMI 4K@60Hz, 1x SD card slot 3.0, 1x TF card slot 3.0, 1x RJ45 1000 Mbps Starting voltage and current 5 V / 330 mA Charging Support for PD3.0 fast charging standard, power up to 100 watts Read speed for TF / SD (3.0) cards Up to 90 MB/s Write speed for TF / SD cards (3.0) Up to 80 MB/s Operating temperature From -10°C to 40°C Connector USB-C Material Aluminum alloy Dimensions 14.5 x 5.3 x 1.5 cm Cable length Approximately 22 cm

One port is all you needThere's no need to switch between charging or streaming audio. You can listen to music without draining your battery or charge while you take calls, all from one USB-C port. Impressive powerPass-through power of up to 60W means your device gets a charge while in use. It supports fast charging for compatible devices, so they get a high-speed power boost. Liste while you chargeA compact solution for charge and audio, this USB-C adapter is perfect when you're on the go. Plus, each port will work for either charging or listening, so there's no need to check which one to use. Just connect and you're all set.

The multi-port USB-C 5Gbps hub AXAGON HMC-5HL expands your laptop with five ports. You can easily and quickly connect a monitor, two USB devices and a Gigabit Ethernet network to the computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology. The USB-C hub will provide you with a universal and powerful 5in1 docking station for modern laptops. The USB hub offers two USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc.  The USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI video output provides high-quality images up to 4K/60Hz Ultra HD resolution.  High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3/4 port is necessary for the proper function of video output. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card.  The aluminum cover ensures mechanical durability and cooling of the USB hub. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running.  Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 2x USB 5Gbps port, USB-A female connector.  1x Power Delivery port (power only), USB-C female connector.  USB-C hub can handle the connection up to two external drives simultaneously.  Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video output: 1x HDMI A port, HDMI A female connector.  4K resolution 4096 x 2160 at up to 60Hz.  2K / WQHD resolution 2560 x 1440 at up to 120Hz.  FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4.  For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details.HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Wake-on-LAN support. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply pow

The multi-port USB-C 5Gbps AXAGON HMC-5H hub 5in1 expands your laptop, computer or phone with five ports. Via the double-sided USB-C connector, you can quickly and easily connect a monitor and three USB devices to the computer at the same time. You also get the possibility to supply laptop using Power Delivery technology. Thanks to the 1 m long cable, you can conveniently arrange the devices you need for work according to your needs. The port replicator thus fulfils the function of a universal 5in1 docking station for modern laptops. The USB hub offers three 5Gbps USB outputs with standard USB-A connectors. The hub can also handle the permanent connection of multiple external drives at the same time. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub can also charge mobile phones and tablets connected to the hub's USB ports with a current of up to 1.5A/5V. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The USB-C connector is reserved only for charging of phone or laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This will also free up one USB-C port on your laptop. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port, Thunderbolt 4 and above. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (laptop connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W (only for charging), USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 3x USB 5Gbps port, USB-A female connector. USB-C hub can handle connecting multiple external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 30Hz.  2K / WQHD resolution 2560 x 1440 at up to 60Hz.  FHD resolution 1920 x 1080 at up to 120Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4.  For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. Other features:  Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. High quality shielded cable ensures fast communication speed and minimal unwanted interference.  Dimensions 121 x 35 x 10 mm. Weig

The multi-port USB-C 5Gbps AXAGON HMC-5H60 5in1 hub expands your laptop, computer or phone with five ports. Via the double-sided USB-C connector, you can quickly and easily connect a monitor and three USB devices to the computer at the same time. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 5in1 docking station for modern laptops. The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C (PD) connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/120Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3, 4 port and above. The compact and slim aluminium body not only looks great, but also provides mechanical durability and passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (connection to laptop): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W port, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz.  2K / WQHD resolution 2560 x 1440 at up to 120Hz.  FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). Support for up to 2-channel LPCM audio. Support fo

The multi-port USB-C 5Gbps hub AXAGON HMC-5H8K expands your laptop, computer or phone with five ports. Via the double-sided USB-C connector, you can quickly and easily connect a monitor and three USB devices to the computer at the same time. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 5in1 docking station for modern notebooks.The USB hub offers three USB 5Gbps outputs. Two with standard USB-A and one with USB-C data connector. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The second of the USB-C connectors is dedicated only to power up a mobile phone or laptop using Power Delivery 3.0 technology by power up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI output provides high quality image up to 8K/30Hz and 4K/120Hz Ultra HD resolution supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/240Hz or FullHD/240Hz or FullHD/240Hz and 144HZ are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3/4 port is necessary for the proper function of video output. The elegant aluminum body ensures mechanical resistance and cooling of the USB hub. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector.   USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. 1x Power Delivery port (power only), USB-C female connector.  USB-C hub can handle the connection up to two external drives simultaneously.  Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports.   Video output: 1x HDMI A port, HDMI A female connector.  8K resolution 7680×4320 at up to 30Hz. 4K resolution 4096 x 2160 at up to 120Hz.  2K / WQHD resolution 2560 x 1440 at up to 240Hz.  FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4.  For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver.   Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, ph

Increase your potentialThe USB-C multiport hub is the perfect partner for the latest super-thin laptops and MacBooks. Additional accessories require more ports that are missing in these laptops. This multiport hub provides a USB-C port for charging the device during use, an HDMI port connected to an HDMI compliant display, two USB 3.0 ports for connecting all additional accessories, and a Gigabit Ethernet port for a wired network connection. Do you also need a card reader? This hub also has an SD / microSD card reader slot! Connect a hub to your laptop's USB-C port to instantly increase your working capacity. Ultra HD resolutionThe HDMI port of the multi-port concentrator allows you to transfer the image to a TV or monitor. The hub provides a super-sharp Ultra HD 4K image ** with a wealth of details and a great viewing experience. Even with high image dynamics, the hub guarantees smooth frame change without any loss or delay. Ethernet connectionThe multiport hub also has a Gigabit Ethernet port. It works perfectly when the wireless connection is insecure or unstable; you can connect your laptop to a wired network with a Gigabit Ethernet cable. ChargingThe USB-C port guarantees uninterrupted loop-through charging. Some laptops are equipped with only one USB-C port, so using a hub means that there is no charging port in the laptop. The hub's USB-C port allows through-charging from a power source, so your laptop can be charged while using all other hub ports. Space for accessoriesDo you need to use more accessories? With three USB 3.0 ports you can connect a mouse, USB stick, hard disk or external DVD burner. With speeds up to 5 Gbps *, USB 3.0 ports allow you to create your own workspace anywhere. You don't need to use one of the USB 3.0 ports to connect a memory card reader, because the multi-port hub is also equipped with an SD / microSD memory card reader! Portable convenienceThanks to the ultra-compact design and brushed metal finish, this concentrator is ideal for BYOD (Bring Your Own Device) applications in the office and on the go. * Based on internal test results. Performance may vary depending on the speed of the source drive. Product Details USB-C multi-port hub change your notebook or smartphone into a workstation It provides the ability to charge from a USB-C port, you can easily charge a USB-C compatible device while using other ports Three USB 3.0 ports allow you to connect additional accessories The HDMI interface supports video output from a computer up to 4K ** on a 4K monitor The Gigabit Ethernet port enables a wired network connection Memory card reader slot for SD / microSD cards The sleek, compact design makes this portable device ideal for travel ** Provided that the computer supports 4K. The HDMI port requires a direct HDMI to HDMI connection

IB-HUB1717-U3 17-port HUB with USB 3.2 Gen 1 Type-A port Unlimited connections: with the docking station, you can expand your computer, tablet or smartphone with 17 high-performance USB 3.2 Gen 1 ports via a USB Type-C port and seamlessly access all your data at the same time Durable casing: the all-aluminium casing provides exceptional durability and shock resistance to ensure long-lasting and reliable use even in the most demanding conditions Data transfer with the highest performance: transfer data at up to 5 Gbit/s on each of the 17 USB 3.2 Gen 1 ports and connect multiple data-intensive systems and storage to a single host Maximum connectivity with 17 USB ports so you can connect all your devices. Connect your devices at the same time High data transfer rates with USB 3.2 Gen 1 is one for each port Data transfer rates of up to 5 Gbit/s are available Stylish and functional design Made of high-quality aluminium Two mounting brackets ensure secure operation anywhere High-performance 96 W power supply - devices are sufficiently powered Universal USB type A charging port for quick and easy charging of smartphones, tablets and other USB-compatible devices Plug & Play, the USB hub is quick and easy to set up simply plug it in and go High compatibility The USB hub is compatible with Windows and macOS and Chrome operating system

IB-HUB1717-U3 17-port HUB with USB 3.2 Gen 1 Type-A port Unlimited connections: with the docking station, you can expand your computer, tablet or smartphone with 17 high-performance USB 3.2 Gen 1 ports via a USB Type-C port and seamlessly access all your data at the same time Durable casing: the all-aluminium casing provides exceptional durability and shock resistance to ensure long-lasting and reliable use even in the most demanding conditions Data transfer with the highest performance: transfer data at up to 5 Gbit/s on each of the 17 USB 3.2 Gen 1 ports and connect multiple data-intensive systems and storage to a single host Maximum connectivity with 17 USB ports so you can connect all your devices. Connect your devices at the same time High data transfer rates with USB 3.2 Gen 1 is one for each port Data transfer rates of up to 5 Gbit/s are available Stylish and functional design Made of high-quality aluminium Two mounting brackets ensure secure operation anywhere High-performance 96 W power supply - devices are sufficiently powered Universal USB type A charging port for quick and easy charging of smartphones, tablets and other USB-compatible devices Plug & Play, the USB hub is quick and easy to set up simply plug it in and go High compatibility The USB hub is compatible with Windows and macOS and Chrome operating system

Neo QLED televizoram piemērotais Samsung One Connect kabelis radīs sakārtotāku vidi mājās – lai savienotu televizoru, piemēram, ar barošanas kabeli, nepieciešams tikai viens vads. Lielas iespējas, ko sniedz viens mazs savienojuma kabelis.