Pla 10 kg

QiDi Polar Cooler for the Q2/Max4 Series3D printing requires maintaining proper operating conditions, especially when working on larger and more demanding projects. The QiDi Polar Cooler was designed for the Q2 and Max4 series printers to provide even better temperature control and increase the stability of the entire process. The use of an active cooling system helps reduce the risk of extruder clogs, improve print quality, and ensure more predictable results. The device utilizes an efficient direct-blow system and a built-in condensate filter, and its installation is quick and hassle-free. It’s a practical solution for users who expect high precision and greater comfort while working.Effective Protection Against ClogsOne of the most common problems encountered during 3D printing is extruder clogging, which can lead to interruptions in operation and a decline in print quality. The QiDi Polar Cooler uses a direct cool-air blowing system that effectively lowers the temperature in the work area and supports the proper functioning of the extruder and filament. This solution reduces the frequency of clogs by up to 90%, resulting in smoother operation and greater reliability of the entire process.Cooler Air, Better Print QualityThe cooling system is designed to deliver air at temperatures as low as 10°C. As a result, the device helps maintain optimal operating conditions when printing models that require exceptional precision. The properly selected temperature affects the quality of the surface finish, improves the accuracy of detail reproduction, and supports the stable formation of successive layers of material.Intelligent Chamber Temperature ControlThe cooler works in conjunction with an active airflow control system and a work chamber heating function. This combination helps maintain more stable operating conditions, which is particularly important when creating large models from PLA filament. Limiting sudden temperature changes reduces the risk of warping and print edge lifting, helping to maintain the integrity and aesthetic appearance of the finished parts.Dry and clean air throughout operationA built-in condensate filter removes moisture from the airflow, ensuring that only dry and clean air enters the cooling system. This solution helps maintain stable printing parameters and minimizes the impact of external factors on the quality of the printed models. An additional advantage is the simple installation of the cooler, which allows you to quickly set up the device and start printing almost immediately.Included in the set extruder cooler power supply power cable air intake tube from the Q2 M2.5*6 self-tapping screw T-shaped cable tie user manual Manufacturer QiDi Model PCM4-Q2 Dimensions 234 x 92 x 214 mm³ Weight 1.6 kg Materials housing: ABS, hose: silicone (5x7) Control mode closed-loop Temperature control range 5–10 ℃ (air outlet) Operating ambient temperature 0–65 ℃ (the chamber temperature must not exceed the material’s softening temperature. For PLA, maximum 45 °C) Noise level 54 dB (at a distance of 1 meter in the horizontal plane) Airflow 2.8–3.2 mph Heat sink material Aluminum Heat sink dimensions 100 × 95 × 25 mm³ Cooling fan power 4 W Quiet air pump power 8.4 W Rated voltage 12 V Rated power 60 W

Longer LK10 3D PrinterThe Longer LK10 is a 3D printer designed for fast and convenient project completion. It offers a build volume of 225 × 225 × 265 mm, print speeds of up to 500 mm/s, and a Direct Drive extruder with a flow rate of up to 25 mm³/s. A nozzle reaching 300°C and a heated bed up to 110°C allow for the use of PLA, PETG, ABS, ASA, and TPU filaments. Automatic leveling, Auto Z-Offset, filament end detection, and resume-on-power-loss features make operation more convenient. Wi-Fi, LAN, and USB connectivity, along with compatibility with Windows and Mac, allow for convenient print management.Fast Direct Drive ExtruderThe printer is equipped with a Direct Drive extruder featuring a precision gear mechanism that ensures smooth material feed even during high-speed printing. The High-Flow Hotend system achieves a volumetric flow rate of up to 25 mm³/s, allowing for high-quality models even with more demanding projects. A maximum print speed of up to 500 mm/s results in shorter print times without sacrificing detail.Less vibration and ghostingThe Klipper software, featuring the Vibration Calibration function, ensures smooth operation of the device. Input Shaping technology reduces ghosting and wall waviness, ensuring models maintain high accuracy even at high speeds. This solution results in a more aesthetically pleasing appearance of prints and greater detail consistency.Wide range of supported materialsA nozzle temperature of up to 300°C and a heated build plate reaching 110°C allow for printing with many popular 1.75 mm filaments. The printer supports PLA, PETG, ABS, ASA, and TPU, making it suitable for both simple decorative models and more durable functional parts. The adjustable layer height from 0.1 to 0.4 mm allows you to tailor print quality and speed to a specific project.Automatic CalibrationThe LK10 features automatic leveling of the heated build plate and an Auto Z-Offset function that automatically sets the correct distance between the nozzle and the build surface. This solution reduces the need for manual configuration and allows you to start printing faster. The “load filament, click print, and walk away” operation system makes the device convenient even for less advanced users.Sensorless HomingThe printer uses a Sensorless Homing system that performs X and Y axis homing without the use of traditional mechanical limit switches. Stepper motors detect resistance and automatically determine the axis position, which simplifies the device’s design and reduces the number of wear-prone components. This solution also contributes to more stable operation of the entire system.Safe PrintingThe power-outage resume feature allows printing to continue from the last saved layer, reducing the risk of losing hours of work. The filament end sensor monitors material flow in real time and stops printing when an empty spool is detected. The Object Exclusion feature allows you to cancel the printing of a single defective model without interrupting work on the remaining items on the build plate.Easy operation and connectivityAn intuitive, multilingual touchscreen simplifies daily operation and provides quick access to settings. The printer supports Wi-Fi, LAN, and USB flash drive connectivity, allowing you to conveniently transfer files and manage prints in various ways. Compatibility with Windows and Mac systems, along with support for STL, OBJ, and STEP formats, enables convenient model preparation in popular software and the OrcaSlicer slicer.Metal constructionThe metal frame increases structural rigidity and reduces vibrations during high-speed printing, which positively impacts print quality. The printer measures 423 × 437 × 492 mm and weighs 8.3 kg, offering a large workspace while maintaining a compact form factor for placement on a desk, in a studio, or in a workshop.Dual Z-axisA dual Z-axis system with two independent motors and trapezoidal screws ensures smooth head movement. This solution improves print precision, enh

QIDI Max 4 3D printerThe QIDI Max 4 is an advanced 3D printer designed for large projects and working with demanding materials. The large workspace, high head temperature, and active chamber heating allow you to print both standard filaments and engineering materials. The CoreXY design, fast closed-loop motors, and extensive cooling system ensure that the device works quickly, stably, and precisely.Large workspaceThe QIDI Max 4 offers a working area of 390 × 390 × 340 mm. Such a large print volume allows you to create large models in one piece without having to divide the project into smaller parts. This saves you time on assembly and maintains the strength of the finished model.High print head temperature for technical materialsThe print head reaches a temperature of up to 370°C, which allows you to work with a wide range of filaments – from PLA and PETG to more demanding materials such as PC or carbon fiber composites. The ceramic throat and improved heat dissipation module reduce the risk of nozzle clogging, keeping printing stable even at high temperatures.Active chamber heatingThe third generation of active chamber heating reaches temperatures of up to 65°C. Combined with the air circulation system, this creates a stable environment for printing materials that are prone to deformation. As a result, even large models made of PLA or ABS retain their geometry and do not curl at the edges.Very fast and precise printingThe use of FOC stepper motors in a closed loop increases drive efficiency by up to 65%. The maximum printing speed reaches 800 mm/s, and the acceleration reaches 30,000 mm/s². This configuration significantly reduces project completion time while maintaining high accuracy.Stable CoreXY designThe CoreXY motion system with 10 mm wide 1.5GT belts ensures high rigidity and accuracy of the head guidance. The X-axis uses a high-hardness linear guide, the Y-axis uses 12 mm steel shafts, and the Z-axis uses four guides and two independent motors with trapezoidal screws. This allows the printer to remain stable even with large and heavy models.Automatic leveling and print controlThe printer is equipped with automatic table leveling with a load cell sensor integrated into the hot end. The monitoring system includes a filament end sensor, an AI camera, and a print resume function after a power failure. This makes the printing process safer and requires less manual control.Air filtration and convenient operationThe QIDI Max 4 has a 3-stage air filtration system consisting of a G3 pre-filter, HEPA H12 filter, and activated coconut carbon. The printer is also equipped with a 5-inch touch screen, Wi-Fi and Ethernet connectivity, and a 1080p camera for viewing and recording timelapse footage of the printing process.Included Filament holder with pneumatic head Filament spool holder Holder cover Case door handle Spare parts kit Mechanism maintenance oil 7 mm wrench Power cord Ethernet cable USB flash drive with software and files Flat screwdriver Adhesive for the work surface to improve print adhesion Set of Allen keys (H1.27, H1.5, H2, H2.5, H3) Scraper for removing prints from the table Manufacturer QiDi Model Max 4 Working area 390 × 390 × 340 mm Printer dimensions 558 × 578 × 612 mm Weight 40 kg Maximum head temperature up to 370°C Maximum table temperature up to 120°C Chamber temperature up to 65°C (active heating – 3rd generation) Maximum print speed 800 mm/s Maximum acceleration 30,000 mm/s² Extruder Direct Drive, hardened steel double gears Supported filaments PLA, ABS, ASA, PETG, TPU, PA, PC, carbon fiber and glass fiber composites Filament diameter 1.75 mm Material flow 40 mm³/s Automatic leveling yes (load cell sensor in hotend) Filament sensor Yes – filament end detection Air filter 3-in-1: G3 + HEPA H12 + activated carbon Camera 1080p with timelapse support Connectivity Wi-Fi 2.4/5 GHz, Ethernet, USB Memory 32 GB eMMC + USB 2.0 Screen 5" touchscreen 800 × 480 Supported file formats STL, OBJ, 3MF, STEP, STP Software Q

QIDI Max 4 Combo 3D printerQIDI Max 4 is an advanced 3D printer designed for large projects and working with demanding materials. Its large workspace, high head temperature, and active chamber heating allow you to print both standard filaments and engineering materials. The CoreXY design, fast closed-loop motors, and extensive cooling system ensure that the device works quickly, stably, and precisely.Large workspaceThe QIDI Max 4 offers a working area of 390 × 390 × 340 mm. Such a large print volume allows you to create large models in one piece without having to divide the project into smaller parts. This saves you time on assembly and maintains the strength of the finished model.High print head temperature for technical materialsThe print head reaches a temperature of up to 370°C, which allows you to work with a wide range of filaments – from PLA and PETG to more demanding materials such as PC or carbon fiber composites. The ceramic throat and improved heat dissipation module reduce the risk of nozzle clogging, keeping printing stable even at high temperatures.Active chamber heatingThe third generation of active chamber heating reaches temperatures of up to 65°C. Combined with the air circulation system, this creates a stable environment for printing materials that are prone to deformation. As a result, even large models made of PLA or ABS retain their geometry and do not curl at the edges.Very fast and precise printingThe use of FOC stepper motors in a closed loop increases drive efficiency by up to 65%. The maximum printing speed reaches 800 mm/s, and the acceleration reaches 30,000 mm/s². This configuration significantly reduces project completion time while maintaining high accuracy.Stable CoreXY designThe CoreXY motion system with 10 mm wide 1.5GT belts ensures high rigidity and accuracy of the head guidance. The X-axis uses a high-hardness linear guide, the Y-axis uses 12 mm steel shafts, and the Z-axis uses four guides and two independent motors with trapezoidal screws. This allows the printer to remain stable even with large and heavy models.Automatic leveling and print controlThe printer is equipped with automatic table leveling with a load cell sensor integrated into the hot end. The monitoring system includes a filament end sensor, an AI camera, and a print resume function after a power failure. This makes the printing process safer and requires less manual control.Air filtration and convenient operationThe QIDI Max 4 has a 3-stage air filtration system consisting of a G3 pre-filter, HEPA H12 filter, and activated coconut carbon. The printer is also equipped with a 5-inch touch screen, Wi-Fi and Ethernet connectivity, and a 1080p camera for viewing and recording timelapse footage of the printing process.Included Filament holder with pneumatic head Filament spool holder Holder cover Case door handle Spare parts kit Mechanism maintenance oil 7 mm wrench Power cord Ethernet cable USB flash drive with software and files Flat screwdriver Adhesive for the work surface to improve print adhesion Set of Allen keys (H1.27, H1.5, H2, H2.5, H3) Scraper for removing prints from the table Manufacturer QiDi Model Max 4 Working area 390 × 390 × 340 mm Printer dimensions 558 × 578 × 612 mm Weight 40 kg Maximum head temperature up to 370°C Maximum table temperature up to 120°C Chamber temperature up to 65°C (active heating – 3rd generation) Maximum print speed 800 mm/s Maximum acceleration 30,000 mm/s² Extruder Direct Drive, hardened steel double gears Supported filaments PLA, ABS, ASA, PETG, TPU, PA, PC, carbon fiber and glass fiber composites Filament diameter 1.75 mm Material flow 40 mm³/s Automatic leveling yes (load cell sensor in the hotend) Filament sensor yes – filament end detection Air filter 3-in-1: G3 + HEPA H12 + activated carbon Camera 1080p with timelapse support Connectivity Wi-Fi 2.4/5 GHz, Ethernet, USB Memory 32 GB eMMC + USB 2.0 Screen 5" touchscreen 800 × 480 Supported file formats STL, OBJ, 3MF, STEP, STP Soft