Pla 2.85

Sunlu S2 Filament DryerThe SUNLU Filadryer S2 is a state-of-the-art filament dryer that effectively removes moisture and restores the materials’ optimal properties, resulting in significantly better 3D print quality. Thanks to an advanced 360° heating system, a large touchscreen, and the ability to dry and print simultaneously, the device ensures maximum convenience and efficiency. It supports a wide range of materials—from PLA and PETG to more demanding filaments like PA or PC—and its intuitive operation and quiet operation make it ideal for both home workshops and professional environments.Dry filament, perfect print – no more problems, once and for allMoisture is the enemy of every 3D print. The SUNLU S2 effectively removes it from filaments, eliminating issues such as stringing, nozzle clogging, poor adhesion, and layer shifting. The result? Smooth surfaces, strong layer bonds, and greater model precision. You save material, time, and stress—every print has a better chance of succeeding on the first try.Intuitive tablet-style operation—everything under control with a single touchA large, color touchscreen (4.6") offers a whole new level of user convenience. You can easily set the temperature, drying time, filament type, and even switch between °C and °F. The quick-select feature for recommended settings means you don’t have to guess—the device suggests the best parameters for a specific material, so you achieve optimal results without experimentation.360° Even Drying – Maximum Effectiveness in Every SituationAn advanced 360° circulation and heating system ensures even moisture removal from the entire filament spool. Regardless of the material type or moisture level, the filament is thoroughly prepared for printing. This solution significantly improves print quality and allows you to fully utilize your printer’s potential.Versatility and convenience – one device for all filamentsThe SUNLU S2 works with most filaments available on the market and supports all standard diameters: 1.75 mm, 2.85 mm, and 3.00 mm. The ability to dry the filament while printing ensures it remains in perfect condition throughout the entire process. Quiet operation (below 10 dB) and a well-thought-out design make this device an indispensable tool for anyone who wants to print better, faster, and without unnecessary complications.Included: SUNLU S2 Filament Dryer Power adapter User manual Manufacturer Sunlu Model Fila Dryer S2 Drying temperature range 45–70°C Temperature range for materials PLA/PLA+/WOOD: 45–50°CPETG/PVB/ABS/ABS+/HIPS/PVA/ASA/TPU/PMMA: 50–55°CPA/PC: 60–70°C Recommended drying time 3–6 h Heating system 360° circulating heating Display Touchscreen LCD Controls Touch panel, one-click settings Supported filament diameters 1.75 mm / 2.85 mm / 3.00 mm Material compatibility PLA, PLA+, PETG, TPU, ABS, PA, PC, and others Operating function Drying during printing Noise level

Sunlu S4 Filament DryerThe SUNLU FilaDryer S4 is an advanced filament dryer designed for demanding 3D printing users. It offers a massive capacity—drying up to 4 spools (1 kg each) simultaneously—and the ability to work with multiple printers at once. With a power output of 320–330 W, rapid heating (up to 50°C in just 30 minutes), and a maximum temperature of 70°C, the device ensures effective and uniform drying of even the most demanding materials, such as PA or PC. The built-in humidity control system, touchscreen, 8 filament outputs, and predefined material profiles make using the device not only effective but also extremely convenient.Dry up to 4 filaments simultaneously – maximum productivityThanks to the large chamber (450 × 210 × 211 mm), you can dry up to four spools of filament at the same time. This is the perfect solution for multicolor printing or working with multiple printers simultaneously. You don’t waste time changing materials—everything is ready in one place, which significantly speeds up and streamlines the entire process.Instant heating and high power – efficiency that makes a differencePerformance is ensured by a PTC heater with a power of up to 330 W, which allows it to reach 50°C in about 30 minutes and a maximum of 70°C. This means shorter filament preparation time and greater drying efficiency. Even difficult, hygroscopic materials regain their properties faster than ever before.Ideal temperature balance – perfect drying for every spoolA three-fan system (on the sides and bottom) ensures even air circulation and temperature stability within ±3°C. This ensures that every section of the filament is dried evenly, resulting in better print quality, greater consistency, and no surprises during operation.Smart humidity control – filament always in perfect conditionAn advanced humidity control system automatically starts drying when the humidity level exceeds the set range (30–50%) and stops the process once optimal conditions are reached (approx. 25%). This means full automation and the assurance that the filament is always ready for use—without manual monitoring.Safety and ease of use – technology you can rely onThe SUNLU S4 is equipped with a triple safety system: a PTC heater, a temperature sensor, and software protection. The device monitors temperature in real time and alerts you to any abnormalities, ensuring safe operation. Additionally, the touchscreen and pre-set profiles for PLA, ABS, PETG, TPU, PA, and PC simplify operation and eliminate the guesswork involved in settings.Full compatibility and flexibility – tailor the equipment to your needsSupport for filaments with diameters of 1.75 mm, 2.85 mm, and 3.00 mm, along with compatibility with most 3D printers, ensures the SUNLU S4 performs well in any environment. Eight filament outputs and the ability to connect multiple printers simultaneously allow for flexible workstation configuration. This device truly expands your capabilities and lets you create without limits.Included: SUNLU S4 Filament Dryer Power cord PTFE tubes User manual Manufacturer Sunlu Model Fila Dryer S4 Rated power 320–330 W Power supply AC 100–240 V / 50–60 Hz Maximum temperature 70°C Heating time to 50°C approx. 30 minutes Capacity 4 spools (1 kg each) Internal dimensions 450 × 210 × 211 mm Device dimensions 516 × 278 × 350 mm Net weight 4.8 kg Gross weight 5.5 kg Heating system PTC + 3 fans Temperature stability ±3°C Humidity control Automatic (start 30–50%, stop approx. 25%) Supported materials PLA, ABS, PETG, TPU, PA, PC Supported filament diameters 1.75 mm / 2.85 mm / 3.00 mm Number of filament outlets 8 (can be used with PTFE tubes) Display Touchscreen LCD

Creality SpacePi X4 Filament DryerCreality SpacePi X4 is a powerful dual-chamber filament dryer, allowing you to dry as many as 4 spools simultaneously with full temperature control from 45 to 85°C. Thanks to the active drying technology, fast heating and quiet operation, you will prepare PLA, PETG, TPU, ABS or PA-CF filaments for printing in a reproducible and stable way, eliminating the problem of moisture, bubbles and shagging during printing.Dry a variety of filamentsThe device features two independently controlled heating chambers, allowing you to set different temperatures for different filaments (e.g. 50°C for PLA and 85°C for PA-CF). You can use one or both chambers as needed, which saves time and energy in a small workshop or when working with different materials at the same time.Speed and uniformityWith 200W + 200W PTC heaters, SpacePi X4 heats up to 85°C in about 20 minutes. The 360° air circulation ensures even heat distribution, and the SpaceDry 4.0 technology with active dehumidification and desiccant regeneration guarantees effective moisture removal without changing cartridges.Quiet, cheap, efficientThe Active Silent system keeps noise levels to just 43-46 dB, allowing you to work comfortably at home and in the workshop. The Creality SpacePi X4 offers energy-efficient operation with an energy consumption of 0.124 kWh in single-chamber mode and 0.208 kWh in dual-chamber mode, reducing the cost of preparing filaments for printing.Wide compatibilityThe Creality SpacePi X4 filament dryer supports spools up to 200 mm in diameter and 150 mm in width with 1.75 mm and 2.85 mm diameter filaments. So you can dry both standard 1 kg spools and larger spools weighing 2 kg.Safe operationThe Creality SpacePi X4's triple protection system includes fan control, heater temperature protection and sensors that monitor the temperature in the chambers. This allows you to use the device without worrying about overheating or damaging the filaments.Everyday convenienceThe dryer is equipped with a chamber backlight, a sliding lock, anti-burn rollers and a moisture-proof seal to ensure comfort. In addition, the device signals the end of drying with a sound, making it easy to use.You control as you pleaseThe EDry UI panel allows you to precisely control drying parameters, including temperature, drying time (1-48 hours) and threshold humidity. You can use automatic modes or custom settings to tailor the drying process to the requirements of your specific filament.Included: Filament dryer Power cord User manual Manufacturer Creality Model SpacePi X4 Manufacturer code 4005010100 Rated power 360W Temperature range 45~85°C Drying time 1-48 h Input voltage 220-240V50/60Hz Supported filament Spool diameter: ≤200 mmWidth: ≤150 mmFilament diameter: 1.75 / 2.85 mm Dimensions 382 × 290 × 270 mm Weight 5 kg