PLA Magenta

PLA Anycubic Filament 1 KG (White)Discover PLA Anycubic filament - the perfect combination of precision and environmental care. The carefully wound spool eliminates tangles, and the stable ± 0.02 mm diameter guarantees extremely accurate prints. The biodegradable material, created from lactic acid, is nature-friendly, while the separately available Color Engine Pro intelligent system with RFID (Radio-frequency Identification, a technology for wireless identification of objects using radio waves) will automatically select the optimal print settings, simplifying the entire process and minimizing waste. In addition, semi-transparent CMYK (Cyan, Magenta, Yellow, Black - a set of four primary colors) technology allows you to create full-color, striking 3D models. Give your prints new life and choose Anycubic today!Precision you can count onAnycubic filament features an extremely durable diameter with a tolerance of ± 0.02 mm, which means that every print will be reproduced with the highest accuracy. Details are sharp, surfaces are smooth, and combined with ultra-high color consistency, you'll get excellent aesthetic and mechanical results. Each roll of Anycubic filament has been wound with special care, so you avoid the frustration of tangled filament. Even winding eliminates the risk of jams and print breaks, and the absence of air bubbles guarantees a smooth, uninterrupted 3D printing process.With the environment in mindAnycubic filament is made from lactic acid, obtained during the fermentation of corn starch (or other plants) by wet milling. It is a biodegradable material that is fully nature-friendly.Smart printingThanks to RFID technology, the Anycubic Color Engine Pro system (available outside the kit) automatically recognizes the type of filament and optimizes printer settings. Forget about tedious calibrations, simply load the filament and the printer will adjust the temperature, speed and retraction on its own, minimizing material waste and guaranteeing perfect results on every job. Remember to heat the print head above 230°C before installing or replacing the filament. This will avoid the risk of nozzle clogging and ensure continuous operation. Compatibility with all FDM (Fused Deposition Modeling, belongs to the group of incremental techniques whose characteristic is extrusion of material from print heads) printers available on the market makes PLA Anycubic a versatile and reliable solution for any 3D printing enthusiast.Experiments with translucent CMYKTranslucent CMYK filament uses four primary colors (cyan, magenta, yellow, black) to create as many as one million vibrant hues under light. Overlapping the colors in different ratios produces full-color 3D embossing on printers such as the Kobra 3 Combo, ideal for creating striking transparent models. Manufacturer Anycubic Model IPHPLWH-106 Color White Weight 1 kg Hardness 81D Nozzle temperature 200-210°C (High speed 3D printer 190-230°C) Tensile strength 61 Mpa Material PLA Diameter 1.75±0.02mm Total length Approximately 330m Heating table temperature 50-60°C Density 1.23/cm³

Sunlu PLA+ 2.0 Filament (Magenta)Sunlu PLA+ 2.0 filament is a durable 3D printing material designed for users seeking greater reliability, smoother operation, and high-quality finished prints. In version 2.0, the material offers up to 1.5 times greater flowability than standard PLA, resulting in consistent feed and a more stable printing process. A 1.75 mm diameter and a tolerance of ±0.02 mm help maintain precision, reduce the risk of extrusion issues, and minimize warping. It’s an excellent choice for those who want to print faster, more efficiently, and without the hassle of nozzle clogging.Durability That Makes a DifferenceSunlu PLA+ 2.0 combines the ease of use typical of PLA with durability comparable to Easy ABS, making it ideal for applications where damage resistance and longer print lifespan are essential. The material is designed to be crack-resistant and more durable in everyday use, allowing you to create sturdy models, functional parts, and projects requiring greater reliability. It’s a filament that delivers an aesthetic result while ensuring the finished model meets higher demands.Fast speed, high qualityIf you want to shorten project turnaround times, Sunlu PLA+ 2.0 will certainly meet your expectations. The filament supports printing speeds of up to 300 mm/s, which allows you to significantly speed up production without sacrificing quality. This is particularly important for larger orders, intensive workshop work, or when deadlines are critical. Stable material feed, low warping tendency, and refined parameters ensure that even at high speeds, you can count on a smooth printing process and satisfying results.Wide compatibility and versatile applicationSunlu PLA+ 2.0 filament was designed with broad compatibility in mind, which is why it works with both SUNLU devices—such as FDM 3D printers, accessories, and filament dryers—and virtually all FDM 3D printers from other manufacturers. This allows you to easily integrate it into your current workflow and immediately put its capabilities to practical use. It is a versatile material for anyone looking for a durable, precise, and fast filament for everyday and more demanding projects. Manufacturer Sunlu Model PLA+ 2.0 M Color Magenta Density 1.21 g/cm³ Vicat softening temperature 54 °C Heat deflection temperature (HDT) 53.8 °C Melting temperature 164 °C Melt flow rate 7.8 g/10 min Tensile strength 53.4 MPa Elongation at break 20.3 % Flexural strength 81.8 MPa Flexural modulus 2740 MPa IZOD notched impact strength 19.8 kJ/m²

ANYCUBIC IPHPLGE-107 PLA Filament 1 kg (Gray)ANYCUBIC PLA 1 kg is a high-quality 3D printing filament that delivers consistent and repeatable results thanks to its precise diameter, accurate to within 0.02 mm. The carefully wound spool minimizes the risk of tangling, ensuring a smooth, uninterrupted print. The material is compatible with FDM printers and supports smart identification in the Anycubic ACE Pro system, enabling automatic parameter recognition.Eco-friendly material and wide range of applicationsPLA filament is made from lactic acid obtained through starch fermentation, making it a biodegradable and more environmentally friendly material. The reusable spool with a threaded connection ensures stability and resistance to temperatures up to 80°C. As a result, the filament is suitable for both everyday prints and more demanding projects.Print precision and extensive color optionsThe filament is also available in a PLA CMYK (Cyan, Magenta, Yellow, White) variant, which allows for over a million color combinations when used with the Kobra 3 Combo printer. The material’s uniform structure and stable operating parameters make it easy to achieve precise details and an aesthetically pleasing finish on models.Print parameters and material propertiesThe recommended nozzle temperature ranges from 190 to 230°C, and the build plate temperature from 55 to 65°C, allowing you to adjust settings for a specific project. The recommended print speed ranges from 50 to 200 mm/s, and the maximum flow rate is 12 mm³/s. The material has a density of 1.24 g/cm³ and a Vicat softening temperature of 55°C, which affects its performance characteristics and ease of processing. Manufacturer Anycubic Model IPHPLGE-107 Material PLA Weight 1 kg Color gray Compatibility FDM printers Filament diameter ±0.02 mm Nozzle temperature 190–230°C Bed temperature 55–65°C Recommended print speed 50–200 mm/s Maximum flow rate 12 mm³/s Cooling time 8 s Density 1.24 g/cm³ Vicat softening temperature 55°C Deformation resistance (0.45 MPa) 54°C Material stiffness (Young’s modulus) 2534 ± 85 MPa Tensile strength 48 ± 5 MPa Elongation at break 8 ± 1% Flexural stiffness 3360 ± 100 MPa Flexural strength 90 ± 3 MPa Impact resistance (Izod) 22 ± 1 kJ/m² Tensile strength (Z) 26 ± 1 MPa