Power Station

Floor cleaning robot Zyle "ZY400WR" Zyle ZY400WR   - this is an advanced floor cleaning robot with TidalPower Cleaning System, thanks to which you will thoroughly clean even the most stubborn stains, protecting the floor coverings. He will be a great helper in your household chores, and will turn cleaning into a pleasant activity. Zyle ZY400WR operating principles: • Wetting the floor: the floor is wetted with clean water, which helps to remove stubborn stains. • Stain scrubbing: the rotating soft brush washes the floor by gently scrubbing and turning frequently; • Suction: dirty water is removed due to high suction power; • Cleaning: Effectively removes any dirt, giving the floor a flawless appearance. 2 separate tanks for clean and dirty water Zyle ZY400WR   the floor cleaning robot uses only clean water for cleaning, so it does not leave any stains. You can fill the clean water tank at any time - just take it out, fill it, put it in the floor cleaning robot and you can continue with the work you started! 4 cleaning modes • Intended path model (ensures that no location is missed or rewashed). • Prohibited zone model (washing in another zone is not allowed). • Spot-specific model (cleans intensively with increased suction power, making it perfect for places with a lot of stains). • Corner cleaning model (concentrated cleaning in various corners). OBS location detection system The floor cleaning robot has a number of location detection sensors that allow it to complete the cleaning task independently. Protection against hitting obstacles 9 OBS sensors on the front of the floor cleaning robot detect obstacles and protect the device from impacts. Fall protection 3 OBS sensors located on the base of the floor cleaning robot protect the device from falling from a certain height. Multi-function display 3 buttons on the device provide excellent control of the device. Using the remote control, you will be able to set certain commands to control the device from a certain distance. Environmentally friendly device handle By lifting the device by the convenient, environmentally friendly handle, you can easily carry it to a cleaning place or a charging station. Technical characteristics of the floor cleaning robot Zyle "ZY400WR": • Battery capacity: 2400 mAh; • Voltage: 100-240 V (50/60Hz); • Operating voltage: DC 14.4 V; • Device charging time: about 300 min.; • Device operating time (fully charged): 80 minutes; • Clean water tank size: 0.85 l; • Dirty water container size: 0.9 l; • Suitable for washing: tiles, marble floors, parquet/laminate; • Device dimensions: 282 mm x 292 mm x 118 mm; • Weight: 3.3 kg. Type of vacuum cleaner Washing robot vacuum cleaner Warranty 24 months Battery type Lithium ion Ultra Silence Yes Water suction function Yes

Mamibot   washing robot-vacuum is a hybrid vacuum cleaner with excellent performance and high floor cleaning efficiency. This device not only vacuums, but also washes - all this ensures more effective floor cleaning and longer-lasting cleanliness at home without any effort. Just relax and let the bot do the work for you! Ultra thin This Mamibot robot stands out from other models with its ultra-slim 7.4 cm high body, which will fit even under low furniture. 4 cleaning modes Choose from automatic, spot cleaning, zigzag mode or corner cleaning mode to suit your individual needs. Controlling the device with a remote control You can comfortably control the robot-pump with the remote control: start or stop the device or change the set cleaning modes. Programmable cleaning schedule Set the most convenient cleaning time for you, from Monday to Sunday, by configuring the settings on the remote control. The device will work when you want it to, and when it starts to lose power, it will charge itself after finding a charging station. Virtual map drawing technology Mamibot   the robot-pump has an algorithmic navigation system, with the help of which a virtual map of the room is created and the cleaning route is planned. Floor cleaning is fast and efficient. Long operating time of the device The 2600 mAh lithium-ion battery ensures uninterrupted operation of the device even up to 90-105 minutes. No need to worry about charging the device After finishing work, the robot-pump will find the charging base and charge itself. Separate water and dust containers The 250 ml water tank and 230 ml dust collection tank are the right size for cleaning medium rooms. Technical features of the washing robot-pump: • Maximum suction power: 880/1100 Pa; • Voltage: 14.4 V; • 2600 mAh lithium ion battery; • Japanese "Brushless" motor; • Noise level:

EcoFlow RAPID Pro 300W,140W-Cable Power BankThe EcoFlow RAPID Pro combines a large capacity of 27,650mAh with a lightweight and compact design that will fit even in the side pocket of a backpack. This makes it an ideal travel companion - you can also take it on a plane without any problems. It also stands out for its impressive power output - up to 140 watts on a single USB-C (Universal Serial Bus Type-C, a universal connector for data and power) port, and up to 300 watts in total. It's also equipped with three USB-C ports and one USB-C cable, allowing you to charge four devices simultaneously. No need to limit yourself!Large capacity of 27,650mAhForget about having to charge your powerbank after every use. The RAPID Pro offers an impressive capacity of 27,650mAh (99.54Wh), allowing you to power your chosen devices for a long time! What does this mean in practice? With the powerbank, for example, you can charge an iPhone 16 about 4.5 times, and a Steam Deck - about 1.4 times.Charge several devices simultaneouslyThe RAPID Pro has a built-in 60cm USB-C cable. This allows you to charge your phone or headphones without having to carry extra cables! In addition, the powerbank is equipped with three USB-C ports. Charge several devices at once and forget about limitations!Power you can rely onOne of the powerbank's USB-C ports offers an output power of up to 140W. So you can charge your phone, tablet or even laptop in no time! On the other hand, the total maximum output power of the RAPID Pro is as high as 300W. That's enough to efficiently prepare your necessary devices for work whenever you need them.Fast chargingThe powerbank charges at record speed - using the compatible RAPID Pro 320W docking station (on separate sale) you'll restore it to up to 80% power in just about 20 minutes! However, that's not the end of the possibilities. Using two ports, you'll get 280 watts and reach the same level in about 26 minutes, and when charging with one port 140 watts, it will take about 40 minutes.State-of-the-art X-VELO technologyThe X-VELO batteries in the RAPID Pro use a multi-pole solution that minimizes energy loss and optimizes temperature control, resulting in excellent performance. In addition, the use of silicon-carbon technology has made it possible to increase energy density while keeping the device compact. The powerbank can also easily operate in freezing temperatures - even down to -20°C. It will be perfect for a winter trip to the mountains!Advanced protection with X-Guard and X-Core 3.0Thanks to X-Guard technology, the RAPID Pro powerbank ensures safe use. The BMS (Battery Management System) and EMS (Energy Management System) effectively take care of the battery's condition, and smart sensors check the temperature up to 10 million times a day, providing full protection against overheating and other hazards.LCD screen with customization optionThe RAPID Pro is equipped with an easy-to-read LCD (Liquid Crystal Display) screen that shows battery status, temperature and power, among other things. You can also customize its appearance to your preferences yourself!Full control through the EcoFlow appWith the EcoFlow app, you can monitor power flow in real time, activate battery life optimization mode or change selected settings. With just a few clicks, you can adjust the performance of the powerbank to your expectations!Included Powerbank Flannel bag General Manufacturer EcoFlow Model EFRAPIDPRO27K-EU Total cell capacity 27650 mAh (99.54 Wh) Battery capacity 16658 mAh (25.2 V) Dimensions 166 x 55 x 58 mm Weight 699,4 g Color Silver Cable length 60 cm Rechargeable battery Cell chemistry NCM Lifetime Approx. 300 cycles (up to 80% capacity) Battery type 104161 Number of cells 7S1P Outputs Total number of outputs 3 USB-C ports + USB-C cable, total 300 watts. Output power of the built-in USB-C cable Two-way fast charging 140 watts USB-C output Cable/USB-C1: 140 watts; USB-C2/C3: 65 watts; Inputs USB-C charging Cable/USB-C1: 140 W;Pogo Pin

DJI Power 100W Foldable Solar PanelThe DJI Power 100W foldable solar panel is a high-performance, portable power source that folds down to a compact size comparable to a laptop (246 × 364 × 30 mm). This makes it convenient and hassle-free to transport. The use of N-type TOPCon cells with a conversion efficiency of up to 24.8% allows for efficient conversion of solar energy, ensuring a stable power supply in various conditions. Weighing approximately 3.19 kg, the design is easy to carry, and its IP67-rated water and dust resistance allows you to use the panel without worry even in changing weather conditions. Additionally, the split support allows for quick one-handed setup, significantly increasing comfort of use in the field.Included: Solar panel Support x2 Manufacturer DJI Manufacturer code CP.DY.00000205.01 Power 100 W Conversion efficiency Up to 24.8% Dimensions when unfolded 728 × 1035 × 3.2 mm Dimensions when folded (without support) 246 × 364 × 30 mm Weight Approx. 3.19 kg Operating voltage 18.1 V Operating current 5.5 A Open-circuit voltage 21.9 V Short-circuit current 5.9 A Operating temperature -18°C to 70°C Protection rating IP67 Compatibility DJI Power 1000 Mini (MC4 cable required to charge the DJI Power 1000 Mini station from solar panels)DJI Power 2000 / DJI Power 1000 V2 / DJI Power 1000 (requires the DJI Power 1.8kW Solar/Car Super Fast Charger or the DJI Power Solar Panel Adapter Module (MPPT) with an MC4 solar charging cable to XT60 DJI Power)DJI Power 500 (requires the DJI Power Solar Panel Adapter Module (MPPT) with an MC4 to XT60 DJI Power solar charging cable or the DJI Power car-to-SDC (12V/24V) power cable with an MC4 to XT60 DJI Power solar charging cable)