Universal Docking Station

USB-C M/F 3.1 Extension Cable 0.5m BlackLanberg USB-C Extension Cable 0.5m M/F 3.1 BlackThe Lanberg USB-C extension cable is a compact 0.5m extension cable with a male-to-female (M) plug on one end and a male-to-female (F) Type-C socket on the other. This allows you to conveniently extend the port from the back of your computer, under your desk, or from the back of a docking station to an easily accessible edge of your countertop. This USB cable is perfect for wall chargers, power banks, hubs, and modern laptops, where every USB-C port is often in short supply. The extension cable allows you to connect devices equipped with a USB Type-C connector from smartphones and tablets, to external drives, and even peripheral accessories.This USB-C cable can be thought of as a small USB Type-C adapter it turns hard-to-reach USB ports into a convenient connection point. This USB adapter protects built-in USB ports from constant plugging and unplugging, which can save your laptop's motherboard in the long run. The 0.5m model complements Lanberg's offering, which also includes a 1.5m version based on the same electrical and mechanical specifications.Specifications of Lanberg's USB-C extension cablesLanberg prioritizes compliance with standards and predictable performance parameters in the USB category. This cable utilizes the USB 3.1 Gen 1 (USB 3.1 v1) specification, which translates into: Transmission speeds of up to 5 Gb/s, sufficient for fast file copying, working with external SSDs, and supporting multiple peripherals on a single port. Supports charging up to 100W (using compatible chargers with USB Power Delivery), allowing you to power not only mobile devices but also many ultrabooks and docking stations. The USB Type-C/USB Type-C 3.1 standard is fully backward compatible with earlier USB categories, so Lanberg's USB extension cable will work with both new and older devices in your installation. This means fewer surprises in the field for the installer, and a working USB-C adapter for the user without having to analyze every port combination.High-quality Lanberg cablesWhen it comes to signal cables, what's invisible is just as important as the design. Lanberg cables from this series use tinned copper conductors with AWG 32 + 24 cross-sections. This arrangement offers a good compromise between flexibility and low resistance in the USB cable in practice, the signal is stable and voltage drops are minimized, which will be especially appreciated during faster charging.Gold-plated USB connector contacts minimize the risk of oxidation and ensure reliable contact even after hundreds of connection cycles. This means fewer complaints about cable breaks for the installer, and for the user, reliable operation in everyday use across a variety of devices.The entire cable is protected by a durable PVC outer shell, resistant to bending and typical mechanical damage in the office or in a rack cabinet. The short 0.5m length helps keep your desk tidy, prevents unnecessary cable loops, and reduces the risk of snagging your devices. The plug and socket are designed to fit securely in USB ports while allowing for easy unplugging, even in tight spaces.This USB cable ranks high in Lanberg's USB category a practical, universal solution for installers and end users looking for a simple way to safely extend a USB Type-C connector from a device.

USB-C M/F 3.1 Extension Cable 1.5m BlackLanberg USB-C Extension Cable 0.5m M/F 3.1 BlackThe Lanberg USB-C extension cable is a compact 0.5m extension cable with a male-to-female (M) plug on one end and a male-to-female (F) Type-C socket on the other. This allows you to conveniently extend the port from the back of your computer, under your desk, or from the back of a docking station to an easily accessible edge of your countertop. This USB cable is perfect for wall chargers, power banks, hubs, and modern laptops, where every USB-C port is often invaluable. The extension cable allows you to connect devices equipped with a USB Type-C connector from smartphones and tablets, to external drives, and even peripheral accessories.This USB-C cable can be thought of as a small USB Type-C adapter it turns hard-to-reach USB ports into a convenient connection point. This USB adapter protects built-in USB ports from constant plugging and unplugging, which can save your laptop's motherboard in the long run. The 0.5m model complements Lanberg's offering, which also includes a 1.5m version based on the same electrical and mechanical specifications.Specifications of Lanberg's USB-C extension cablesLanberg prioritizes compliance with standards and predictable performance parameters in the USB category. This cable utilizes the USB 3.1 Gen 1 (USB 3.1 v1) specification, which translates into: Transmission speeds of up to 5 Gb/s, sufficient for fast file copying, working with external SSDs, and supporting multiple peripherals on a single port. Supports charging up to 100W (using compatible chargers with USB Power Delivery), allowing you to power not only mobile devices but also many ultrabooks and docking stations. The USB Type-C/USB Type-C 3.1 standard is fully backward compatible with earlier USB categories, so Lanberg's USB extension cable will work with both new and older devices in your installation. This means fewer surprises in the field for the installer, and a working USB-C adapter for the user without having to analyze every port combination.High-quality Lanberg cablesWhen it comes to signal cables, what's invisible is just as important as the design. Lanberg cables from this series use tinned copper conductors with AWG 32 + 24 cross-sections. This arrangement offers a good compromise between flexibility and low resistance in the USB cable in practice, the signal is stable and voltage drops are minimized, which will be especially appreciated during faster charging.Gold-plated USB connector contacts minimize the risk of oxidation and ensure reliable contact even after hundreds of connection cycles. This means fewer complaints about cable breaks for the installer, and for the user, reliable operation in everyday use across a variety of devices.The entire cable is protected by a durable PVC outer shell, resistant to bending and typical mechanical damage in the office or in a rack cabinet. The short 0.5m length helps keep your desk tidy, prevents unnecessary cable loops, and reduces the risk of snagging your devices. The plug and socket are designed to fit securely in USB ports while allowing for easy unplugging, even in tight spaces.This USB cable ranks high in Lanberg's USB category a practical, universal solution for installers and end users looking for a simple way to safely extend a USB Type-C connector from a device.

BlitzWolf BW-HDC8 240W USB-C to USB-C Cable, 0,.5m (black)The BlitzWolf BW-HDC8 is a USB-C to USB-C cable that is designed for superior performance and flexibility in professional and home applications. With Thunderbolt 5 support, it achieves dizzying data transfer speeds of up to 80 Gbps - almost twice as fast as Thunderbolt 4 or USB4. This translates into lightning-fast file copying, smooth 8K video transfer and efficient work with multiple devices simultaneously.Power and image without compromiseThe cable supports charging at up to 240 watts, so it will power a laptop, docking station or eGPU with a single cable. With DisplayPort 2.1 compatibility, you can transmit 8K video at 60 Hz or 4K video at 240 Hz, which is ideal for both the studio and gaming rig. PCIe 4.0 support allows you to connect external graphics cards, transforming your laptop into a powerful workstation.For creatives, gamers and mobile professionalsThe BW-HDC8 is a great choice for those working with demanding material - such as 8K video editing, 3D projects or graphics processing. But it's also a tool for gamers and home users who want one reliable cable for everything. Compatibility with Thunderbolt 4/3, USB-C and USB4 ensures universal performance, although full capabilities will be provided by connecting to certified Thunderbolt 5 devices.Sturdy construction and tidy deskThe nylon braid protects the cable from damage, and the 0.5-meter length is great for a tidy setup without excess cable. Manufacturer BlitzWolf Model BW-HDC8 Type USB-C - USB-C / Thunderbolt 5 cable Length 0,5 m Material Braided nylon Color Black Transmission speed Up to 80 Gbps Video support 8K@60Hz / 4K@240Hz (DisplayPort 2.1) Maximum charging power 240 W Compatibility Thunderbolt 5 / Thunderbolt 4 / USB-C / USB4 / DisplayPort 2.1 / PCIe 4.0

BlitzWolf BW-HDC8 240W USB-C to USB-C Cable, 1.5m (black)The BlitzWolf BW-HDC8 is a USB-C to USB-C cable that is designed for superior performance and flexibility in professional and home applications. With Thunderbolt 5 support, it achieves dizzying data transfer speeds of up to 80 Gbps - almost twice as fast as Thunderbolt 4 or USB4. This translates into lightning-fast file copying, smooth 8K video transfer and efficient work with multiple devices simultaneously.Power and image without compromiseThe cable supports charging at up to 240 watts, so it will power a laptop, docking station or eGPU with a single cable. With DisplayPort 2.1 compatibility, you can transmit 8K video at 60 Hz or 4K video at 240 Hz, which is ideal for both the studio and gaming rig. PCIe 4.0 support allows you to connect external graphics cards, transforming your laptop into a powerful workstation.For creatives, gamers and mobile professionalsThe BW-HDC8 is a great choice for those working with demanding material - such as 8K video editing, 3D projects or graphics processing. But it's also a tool for gamers and home users who want one reliable cable for everything. Compatibility with Thunderbolt 4/3, USB-C and USB4 ensures universal performance, although full capabilities will be provided by connecting to certified Thunderbolt 5 devices.Sturdy construction and tidy deskThe nylon braided cable protects the cable from damage, and the length of 1.5 meters ensures comfortable use in all conditions. Manufacturer BlitzWolf Model BW-HDC8 Type USB-C - USB-C / Thunderbolt 5 cable Length 1,5 m Material Braided nylon Color Black Transmission speed Up to 80 Gbps Video support 8K@60Hz / 4K@240Hz (DisplayPort 2.1) Maximum charging power 240 W Compatibility Thunderbolt 5 / Thunderbolt 4 / USB-C / USB4 / DisplayPort 2.1 / PCIe 4.0

The multi-port USB-C 5Gbps hub AXAGON HMC-5HL expands your laptop with five ports. You can easily and quickly connect a monitor, two USB devices and a Gigabit Ethernet network to the computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology. The USB-C hub will provide you with a universal and powerful 5in1 docking station for modern laptops. The USB hub offers two USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc.  The USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI video output provides high-quality images up to 4K/60Hz Ultra HD resolution.  High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3/4 port is necessary for the proper function of video output. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card.  The aluminum cover ensures mechanical durability and cooling of the USB hub. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running.  Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 2x USB 5Gbps port, USB-A female connector.  1x Power Delivery port (power only), USB-C female connector.  USB-C hub can handle the connection up to two external drives simultaneously.  Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video output: 1x HDMI A port, HDMI A female connector.  4K resolution 4096 x 2160 at up to 60Hz.  2K / WQHD resolution 2560 x 1440 at up to 120Hz.  FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4.  For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details.HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Wake-on-LAN support. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply pow

The multi-port USB-C 5Gbps AXAGON HMC-5H hub 5in1 expands your laptop, computer or phone with five ports. Via the double-sided USB-C connector, you can quickly and easily connect a monitor and three USB devices to the computer at the same time. You also get the possibility to supply laptop using Power Delivery technology. Thanks to the 1 m long cable, you can conveniently arrange the devices you need for work according to your needs. The port replicator thus fulfils the function of a universal 5in1 docking station for modern laptops. The USB hub offers three 5Gbps USB outputs with standard USB-A connectors. The hub can also handle the permanent connection of multiple external drives at the same time. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub can also charge mobile phones and tablets connected to the hub's USB ports with a current of up to 1.5A/5V. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The USB-C connector is reserved only for charging of phone or laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This will also free up one USB-C port on your laptop. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port, Thunderbolt 4 and above. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (laptop connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W (only for charging), USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 3x USB 5Gbps port, USB-A female connector. USB-C hub can handle connecting multiple external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 30Hz.  2K / WQHD resolution 2560 x 1440 at up to 60Hz.  FHD resolution 1920 x 1080 at up to 120Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4.  For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. Other features:  Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. High quality shielded cable ensures fast communication speed and minimal unwanted interference.  Dimensions 121 x 35 x 10 mm. Weig

We create solutions that count every dayDo you value your time and data protection is important to you? With transfer speeds of up to 5 GB/s, a USB 3.0 interface, SATA III support and support for SSD and HDD, our docking station offers everything you need in one device! The docking station has space for two HDD or SSD drives. Whether you use HDD or SSD, our docking station supports both 2.5'' and 3.5'' drives. Rubber feet ensure that the device remains stable during use.Simply plug in and enjoy!Our station works in plug & play mode. Simply plug it in and use it! Installing an SSD or HDD is easy, fast and requires no specialist technical skills. Offline Cloning - Safe and ConvenientThis docking station model offers two different ways of copying data: You can place the hard drive in port A or B, connect the docking station to your computer with a USB cable and power supply, and then proceed to copy. The second way is offline copying. Cloning takes place without being connected to a computer. Simply place the two drives in ports A and B, then switch on the power. The cloning process starts when you hold down the COPY button for 3s, and the progress and completion of the process is indicated by the indicator lights.Convenient and Universal Solution for SSD and HDDThe device is an interesting alternative not only for people who store documents or private files on disks, but also for small businesses wishing to archive their computer data without investing in expensive solutions. The hard disk docking station can also be connected to a TV or monitor equipped with a USB port, in which case it will act as a video player with a huge storage capacity. If you collect photos and videos on hard disks, this is the product for you.

The modern solution for professionals The Lenovo USB-C Slim Travel Dock is the perfect tool for modern professionals who value high productivity anywhere. Equipped with 8 ports, this device allows you to work efficiently wherever you are. Its compact and stylish form makes it not only a functional but also an attractive accessory. High image quality and fast data transfer The Lenovo Docking Station supports 4K video display at 60 Hz, allowing you to enjoy high visual quality without lag. In addition, the USB 3.2 Gen 2 ports provide high-speed data transmission at up to 10 Gbps. This is ideal for both work and streaming media or gaming. Multi-device support and environmental care With universal connectivity, the Lenovo USB-C Slim Travel Dock allows you to connect multiple devices quickly and easily. The product uses 66% recycled materials, demonstrating Lenovo's commitment to sustainability. You don't have to choose between performance and environmental responsibility.