Power Supply Charger

The multi-port USB-C 5Gbps AXAGON HMC-5H60 5in1 hub expands your laptop, computer or phone with five ports. Via the double-sided USB-C connector, you can quickly and easily connect a monitor and three USB devices to the computer at the same time. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 5in1 docking station for modern laptops. The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C (PD) connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/120Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3, 4 port and above. The compact and slim aluminium body not only looks great, but also provides mechanical durability and passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (connection to laptop): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W port, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz.  2K / WQHD resolution 2560 x 1440 at up to 120Hz.  FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. Full support for HDCP 1.4 and 2.2 (High-bandwidth Digital Content Protection). Support for up to 2-channel LPCM audio. Support fo

K&F CONCEPT SONY NP-FW50 Replacement Battery Charger Set. Charging kit includes two 7.4V 1100mAh Sony NP-FW50 replacement batteries and Micro USB/Type C dual interface charger, supports wall charger, car charger or mobile power charging. Easy to carry when you go out and record exciting moments at any time without worrying about power failure. * 【Compatibility】K&F CONCEPT's NP-FW50 battery is compatible with Sony cameras that use NP-FW50 battery, such as Sony Alpha 7, A7, Alpha 7R, A7R, A7R II, A7 II, A7S, A7S II, A7M2, A7SM2, A7RM2, A5000 A6000 A6300 A6500, a3000 , NEX-3, NEX-3N, NEX-5, NEX-5C, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7, NEX-C3, NEX-F3, SLT-A33, SLT -A35, SLT-A37, SLT-A55V, Cyber -shot DSC-RX10, etc. (Note: The above are only some of the models listed) * 【Safety】 Using high-quality batteries, strict inspection standards, safe and reliable, rest assured that charging and use, with multiple circuit protection to prevent battery overcharge, over-current protection, over-discharge protection, over-voltage protection, short-circuit protection, over-power protection, high-temperature protection, recovery protection. - Two batteries fully charged at the same time time time: about 2.5h - Operating temperature: less than 60°C. * 【High capacity Long lasting life】2pcs 7.4V 1100mAh high capacity batteries. High-quality cells, CE/RoHS/FCC certified; no memory effect, long-lasting battery life. * 【Convenient and quick】Charging kit includes two 7.4V 1100mAh Sony NP-FW50 replacement batteries and Micro USB/Type C dual interface charger, supports wall charger, car charger or mobile power charging. Easy to carry when you go out and record exciting moments at any time without worrying about power failure. * 【Intelligent charging】LCD dual charger accurately displays the battery charging status, the charging process uses an intelligent chip to better protect the battery; dual-slot charging port can quickly charge two batteries at the same time, greatly saving your time and is the best choice for traveling. K&F CONCEPT SONY NP-FW50 Replacement Battery Charger Set Note: 1. Cameras are not included • The charging set includes two 7.4V 1100mAh SONY NP-FW50 replacement batteries and Micro USB/Type C dual interface charger, which is easy to carry when traveling and record any wonderful moment. • Original standard: It is manufactured according to Canon SONY NP-FW50 battery standard, with a slightly larger capacity than the original battery, and can be charged using the original charger. • High quality cell with CE/RoHS/FCC certification; No memory effect, long endurance. • Packaging: SONY NP-FW50 replacement battery *2, double charger *1 for NP-FW50 battery, Micro USB cable *1. Safe and reliable, assured charging and use With multiple circuit protection, prevent battery overcharge, overcurrent protection, overdischarge protection, overvoltage protection, short circuit protection, over power protection, high temperature protection, recovery protection. Compatibility K&F CONCEPT's NP-FW50 battery is compatible with SONY cameras that use NP-FW50 batteries, For example, Sony Alpha 7, A7, Alpha 7R, A7R, A7R II, A7 II, A7S, A7S II, A7M2, A7SM2, A7RM2, A5000 A6000 A6300 A6500, a3000, NEX-3, NEX-3N, NEX-5, NEX-5C, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7, NEX-C3, NEX-F3, SLT-A33, SLT-A35, SLT-A37, SLT-A55V, Cyber-shot DSC-RX10, etc. (Note: Only some models are listed above) With Micro USB and Type C dual interface charger, support a variety of charging methods It can be charged by mobile phone charger, portable power supply, notebook, power bank and so on • Product type: double-slot electrical appliance; Current input: 5V/2.1A; • Output (1 battery) : 8.4v/700mA; Output (2 batteries) : 8.4v/500mA • Ports: Micro-USB and Type-C ports (excluding Type-C charging cable) NP-FW50 rechargeable lithium-ion battery SONY NP-FW50 battery is the best replacement. • 7.4v 1100mAh rechargeable lithium-ion battery for longer power and durability. • High quality cell

Switchbot Home air conditioning panelSwitchBot Home is a multifunctional 4-in-1 panel that combines a thermometer, hygrometer, motion sensor, heating control panel and programmable button. It allows you to quickly and conveniently manage the temperature in your home - no phone, no apps, no voice commands. With just one panel, you can control thermostat heads, monitor room conditions and trigger automations across the SwitchBot ecosystem. Ideal for those who want to combine convenience with real energy savings.Convenient thermostat controlInstead of reaching for your phone, simply press a button on the panel to turn the heating on or off or change the temperature. This is a convenient solution for homeowners who prefer traditional forms of operation, such as seniors. The panel can control multiple SwitchBot thermostats simultaneously, ensuring even heating throughout the house. If you want to control different rooms separately - just install several panels. This way each room, from the bedroom to the living room, can have independent settings.Accurate measurement of temperature and humidityThe built-in high-precision temperature sensor (±0.2°C) allows accurate and stable control of heating. The panel continuously measures the temperature and humidity in the room, and presents the results in the form of clear graphs on the display. This makes it easy to see when it's best to turn the heating on or off, which translates into lower energy consumption and lower bills. You can also set automatic operation of the devices - for example, when the temperature drops below a certain threshold, the heating will turn on automatically.One device - many possibilities across the SwitchBot ecosystemThe panel works with other SwitchBot devices, such as the Switch Bot, Curtain 3 curtains and thermostatic heads. This allows you to set up automations to fit your daily habits - open the curtains in the morning and start the heating with one click, and turn off the lights in the evening without reaching for your phone. The panel allows you to simplify many daily tasks and makes your smart home run even more efficiently. The SwitchBot Hub is required to connect the devices.Backlit screen and motion sensor - visibility even at nightThe panel's screen automatically turns on when a button is pressed or motion is detected. This ensures that you always have access to information, even after dark, without having to turn on the light. The clear and minimalist interface displays the current temperature, humidity level and other basic status information.Long battery life - without constant replacementThe panel runs on four AAA batteries, which last up to a year of operation with standard use. When the battery level drops to 20%, you'll see a notification on the screen and in the app that a replacement is needed. This means less worry and complete independence from cables or chargers. Manufacturer Switchbot Model W7400000 Power supply AAA battery x4 Temperature measurement accuracy ±0.2°C Display LED

The multi-port USB-C 5Gbps hub AXAGON HMC-5H8K expands your laptop, computer or phone with five ports. Via the double-sided USB-C connector, you can quickly and easily connect a monitor and three USB devices to the computer at the same time. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 5in1 docking station for modern notebooks.The USB hub offers three USB 5Gbps outputs. Two with standard USB-A and one with USB-C data connector. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. The second of the USB-C connectors is dedicated only to power up a mobile phone or laptop using Power Delivery 3.0 technology by power up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI output provides high quality image up to 8K/30Hz and 4K/120Hz Ultra HD resolution supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/240Hz or FullHD/240Hz or FullHD/240Hz and 144HZ are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3/4 port is necessary for the proper function of video output. The elegant aluminum body ensures mechanical resistance and cooling of the USB hub. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector.   USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. 1x Power Delivery port (power only), USB-C female connector.  USB-C hub can handle the connection up to two external drives simultaneously.  Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports.   Video output: 1x HDMI A port, HDMI A female connector.  8K resolution 7680×4320 at up to 30Hz. 4K resolution 4096 x 2160 at up to 120Hz.  2K / WQHD resolution 2560 x 1440 at up to 240Hz.  FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4.  For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver.   Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, ph

Verbatim Mini GaN Charger 100W (30239) is a compact, 3-port GaN wall charger with a touch TFT display, designed to charge a laptop, tablet, and smartphone at the same time. The display shows real-time charging statistics for each port and lets you switch between views such as total power, per-port power, total charging time, and Eco or Turbo Boost status, as well as rotate the screen for easier reading. With PPS (Programmable Power Supply) support, the charger dynamically adjusts output power to ensure maximum charging speed and safety. GaN technology improves efficiency and helps keep operating temperatures lower, while multiple protection features and a fire-resistant PC housing provide reliability at home and on the go. The package includes interchangeable EU, UK, and US plug heads, making it easy to use the charger in different countries. Key features: Total output up to 100 W and 3 ports for charging up to three devices simultaneously Touch TFT display with power readout, charging time, Eco/Turbo Boost modes, and screen rotation PPS support for dynamic power adjustment and fast, safe charging Interchangeable EU, UK, and US plug heads plus universal 100240 V input for global use

The multi-port USB-C 5Gbps AXAGON HMC-6GLN GLASS 6in1 hub expands your laptop, computer or phone with six ports. You connect your laptop to the hub via a 20 cm long USB-C cable. You immediately have a connection for a monitor, three USB devices and an RJ-45 connector for a Gigabit Ethernet network. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will provide you with a simple and compact 6in1 docking station for modern laptops. The USB hub offers three USB 5Gbps outputs, two with standard USB-A and a third with USB-C data connector. Transfer rate is up to 5Gb/s thanks to USB 3.2 Gen 1 interface. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD or 1080p/240Hz Full HD and the transmission of multi-channel audio. Thanks to HDR support, you can enjoy a significantly expanded range of colours and contrasts without limitations. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. The compact aluminum body not only looks great, but also provides mechanical durability and passive cooling. The glossy upper part with a decent backlit logo underlines the premium look of the hub. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running.  For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3, 4 and above) and Power Delivery powered. The hub can easily connect to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (computer, tablet or phone connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 10Gbps, USB4, Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (tablet, phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 5Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/60Hz Ultra HD, 2K/144Hz Quad HD, 1080p/240Hz Full HD.  Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. To achieve maximum resolution and frequency values on video outputs, the hub must be plugged into a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) version min. 1.4 or a USB-C port supporting min. Thunderbolt 3. A suitable updated OS and up-to-date graphics drivers are also required. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) s

LP-E6NH LP-E6N LP-E6 Replacement Battery, this is perfectly compatible with Canon EOS R5/ EOS R6/ EOS R/EOS 80D/ 90D/ 70D/ 60D/ 5D Mark II/ Mark III/ Mark IV/ 6D/ 5DS / 5DS R/ XC10/ XC15. The Type C charging port can be directly connected to the adapter for charging using the included USB Type A to Type C charging cable, no need for an external charger, traveling light. * 【Original Standard】LP-E6NH LP-E6N LP-E6 Replacement Battery, this is perfectly compatible with Canon EOS R5/ EOS R6/ EOS R/EOS 80D/ 90D/ 70D/ 60D/ 5D Mark II/ Mark III/ Mark IV/ 6D/ 5DS / 5DS R/ XC10/ XC15 * 【Type C Charging Port】The Type C charging port can be directly connected to the adapter for charging using the included USB Type A to Type C charging cable, no need for an external charger, traveling light. * 【Large Capacity】Capacity: 2250mAh | Type: Li-ion | Power: 16.2Wh, it takes about 4 hours to fully charge the battery with a 5V/1A power charger. * 【More Charging Options】It can be charged directly with Type C charging cable and is also compatible with LP-E6 dedicated charger for charging; charging via USB wall charger, car charger or external mobile power supply, providing more choices for battery charging. * 【Charging Indicator Light】The battery is designed with a charging indicator light to monitor the charging status in real time. Red light on means charging in progress, green light on means fully charged. K&F CONCEPT Canon LP-E6NH direct charge battery in 2 packs • Support direct charging of the charging bank, reducing the burden of travel • 2250mAh LP-E6/LP-E6N/LP-E6NH replacement battery • Full decoding chip: original standard manufacturing, suitable for original camera and charger, no pop-up window. • High quality battery, CE/RoHS/FCC/UKCA certification; No memory effect, long endurance. • Packaging: LP-E6NH direct charge battery *2, Type C charging cable *2. Easy to carry Type C Direct charge Multiple charging modes PreviousNext 2250mAh large capacity Safe and reliable Indicator light reminder PreviousNext

USB-C hub with 9 ports, if slots are missing (or need to be expanded) on the PC, notebook, MacBook, tablet or if several devices are to be connected/disconnected centrally via one connector Removable feet for space-saving operation or transport Rubberized feet for a secure stand without slipping Plug and play, no manual software/driver installation required Compatible with Thunderbolt 3/4 (lightning icon) Power supply is via USB   Ports: 4x USB-A: for e.g. external hard drive, USB stick, mouse, keyboard, printer 1x USB-C data: for e.g. external hard drive, USB stick, mouse, keyboard, printer 1x USB-C Power: for e.g. PD charger, PD power supply, PD power pack 2x HDMI™: for connecting to e.g. monitor, TV, projector 1x LAN/Ethernet: for e.g. wired Internet network connections   Requirements Operating system: Windows 11/10 and Mac OS 10.8 or higher To use the charging function via USB-C, the device must support USB Power Delivery (USB PD) or Thunderbolt 3/4. To use the monitor function via HDMI™, the device must support DisplayPort Alternate Mode (DP Alt Mode), Thunderbolt 3/4 or USB4. The MST function via HDMI™ only works in conjunction with current Microsoft Windows operating systems.   Dimensions Case width: 26.4 cm Case height: 2.94 cm Case depth: 6 cm Cable length: 0.2 m

100 W smart soldering iron with FNIRSI HS-02B tool kitFNIRSI HS-02 is a new generation smart soldering iron that combines 100 W power, rapid heating, precise temperature control, and exceptional mobility. PD, QC, and DC (9–20 V) power support, adaptive power control, a 0.96" IPS color screen, ESD protection, and automatic functions make it a tool ready for use in both electronics service and in the field. This equipment is designed for people who expect maximum performance without compromise.A clear advantage over a standard soldering ironCompared to standard 60-65 W soldering irons, the FNIRSI HS-02 offers over 50% more power, up to four times faster tinning (2 s), and a sturdy CNC aluminum and silicone housing instead of ABS plastic. In addition, it offers features not available in cheaper models: adaptive power, preset temperatures, sleep mode, antistatic protection, and an included bag and stand. It is a premium tool that makes a real difference in everyday work.Instant heating and stable operation under loadThe maximum power of 100 W guarantees rapid heating of the tip and excellent temperature maintenance even when soldering massive wires, screens, connectors, and large soldering areas. The soldering iron reacts immediately upon contact with the component, which eliminates temperature drops and allows you to work faster, cleaner, and with greater precision.Universal power supply – complete freedom of operationWith USB-C Power Delivery, Quick Charge, and classic DC 9–20 V support, the FNIRSI HS-02 can be powered from a mains charger, power bank, laptop, or workshop power supply. It is the perfect solution for mobile service technicians, field electronics engineers, and users who want a single tool for all applications – without location restrictions.Adaptive power control – intelligence that protectsAn advanced automatic power adjustment system analyzes operating conditions and dynamically regulates power consumption. This ensures that the soldering iron operates efficiently and stably, while protecting the tip, power supply, and soldered components. This provides real safety and longer equipment life, especially during intensive use.Precise PID temperature controlThe 100–450°C adjustment range and segmented PID control ensure fast heating, stable temperature maintenance, and instant heat recovery. Control accuracy below 2% allows for safe work with sensitive SMD and BGA circuits and precision electronics, minimizing the risk of overheating and damage.Preset temperatures and convenient operationThe ability to save several temperature profiles (CH1, CH2, CH3) allows you to instantly adjust the soldering iron to a specific task. The clear interface, logical menu, and physical buttons make changing settings quick and intuitive, without interrupting your work and without unnecessary complications.Automatic sleep mode – economy and safetyThe inductive sleep function automatically lowers the temperature when the soldering iron is resting on the stand and immediately restores it when the device is lifted. This is not only convenient, but also reduces energy consumption, extends the life of the tip, and increases safety during operation.ESD protection and robust designBuilt-in electrostatic discharge (ESD) protection with grounding capability protects sensitive electronic components from discharge. The CNC-machined aluminum housing, silicone non-slip grip, and tip guard protect against burns and ensure durability, comfort, and a secure grip even during long hours of work.Included: FNIRSI HS-02B soldering iron 3 soldering tips USB-C power cable Mini soldering stand Carrying bag Manufacturer FNIRSI Model HS-02B Device type Smart digital soldering iron Maximum power 100 W Operating temperature range 100–450°C (180–842°F) Temperature control accuracy < 2% Temperature control type Segmented PID control Heating (tinning) time approx. 2 s Power supply USB-C Power Delivery / Quick Charge / DC Input voltage range 9–20 V Maximum supported

Battery kit for LOQED smart lockThe LOQED Power Kit is an eco-friendly and convenient power source created specifically for the LOQED Touch Smart Lock. The kit includes eight long-life AA batteries, an AC adapter and a three-meter cable that allows charging without removing the lock housing. This practical solution eliminates disposable batteries, reduces waste and ensures uninterrupted operation of the smart lock for up to twelve months. With the Power Kit, the LOQED lock operates even more economically, safely and environmentally friendly.Included 8 AA batteries (NiMH, rechargeable) AC adapter Power cord with a length of 3 meters Charging adapter User manual Manufacturer LOQED Model Power Kit Color Black Purpose Powering the LOQED Touch Smart Lock Type of cells AA NiMH (rechargeable) batteries Number of rechargeable batteries 8 pieces Operating time on a single charge up to 12 months Length of power cord 3 meters Power supply mains charger Charging method without removing the lock housing Application for indoor use only Additional features Eco-friendly alternative to disposable batteries, compact adapter design Compatibility LOQED Touch Smart Lock

FNIRSI FNB58 BT USB port tester with BluetoothThe FNIRSI FNB58 BT is an advanced USB port and fast charging technology tester that allows you to easily check power parameters, protocol compatibility, and accessory quality. It offers a clear display, very high measurement precision, and broad support for fast charging standards from popular brands. It allows you to analyze voltage, current, power, and charging waveforms in real time and offline. It checks the quality of chargers, cables, and their actual performance, detecting weak or dangerous power sources. With Bluetooth connectivity and app support, it provides convenient data monitoring and additional safety features.Enter the era of super-fast chargingThe FNIRSI FNB58 BT is an advanced measuring tool designed for technology enthusiasts, service technicians, and anyone who wants to have full control over the charging process. Support for PD3.1 standards with EPR AVS mode up to 28 V and detection of PD cables with power up to 240 W make the device a perfect fit for advanced chargers and accessories. It is a device that allows you to understand and fully utilize the potential of fast charging.Precision that is visible at first glanceThe front of the tester features a 2-inch high-resolution LCD display that presents complete and extremely accurate measurement data. A resolution of up to 0.0001 allows you to detect even subtle changes in voltage, current, and power in real time, so that any anomalies during charging are immediately noticeable. The simple, easy-to-read interface and independent function menu make operation intuitive and comfortable.Robust construction and full connector functionalityThe FNIRSI FNB58 BT is equipped with a 5P high current capacity USB-A output and input, as well as Type-C and Micro inputs and a Type-C output. The use of 24-pin high-quality copper contacts in the Type-C port translates into stable and reliable measurements. The housing also features function buttons, a back button, a PC interface, and a dedicated PD switch, making the device a complete diagnostic center for USB ports and cables.Full compatibility with the most popular standardsThe tester supports a wide range of fast charging protocols, including PD 2.0 and 3.0, PPS, QC 2.0 and 3.0, FCP, SCP, AFC, PE, DASHVOOC, and SuperVOOC. This allows it to work seamlessly with Huawei, Xiaomi, and OPPO super fast charge technologies, as well as Apple Power Delivery and Samsung fast charging. Automatic protocol detection allows you to instantly check which mode your charger and cable are operating in.Detect problems before they damage your equipmentAdvanced power ripple measurement allows you to quickly assess the quality of the charger. The device clearly indicates the wave level, allowing you to assess whether the power supply is excellent, normal, burdened with high ripple, or even of poor quality. This helps you avoid using poor-quality chargers that shorten battery life and negatively impact device safety.Real-time and offline curve analysisThe FNIRSI FNB58 BT displays live voltage and current waveforms, allowing you to immediately detect abnormal charging. In addition, it offers offline curve recording for up to 9 hours, allowing you to analyze the entire process after charging is complete. Monitoring D+ and D- curves gives you full insight into real-time changes in charging protocols, making the tester an expert tool.Cable and real-world performance diagnosticsThe device can read data from the CC line in PD cables with an E-Marker chip, detect DASH cable parameters, and measure their internal resistance using a two-step method under a constant current load. This makes it easy to check whether the cable actually meets the declared parameters and is suitable for fast, high-power charging.Smart power management and Bluetooth connectivityThe tester supports the recording of up to 10 sets of charging and discharging power data, and the built-in algorithm allows for quick calculation of battery

The multi-port USB-C 10Gbps AXAGON HMC-6G2L hub 6in1 expands your laptop, computer or phone with six ports. You can easily and quickly connect a monitor, three USB devices and a Gigabit Ethernet network to the computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 6-in-1 docking station not only for Windows laptops but also for Apple laptops such as MacBook Air or MacBook Pro. The USB hub offers three USB 10Gbps outputs. Two with standard USB-A and third with USB-C data connector. With the advanced USB 3.2 Gen 2 standard, you can connect high-speed devices such as NVMe M.2 external drives to all outputs at up to 2x the speed of 10 Gb/s compared to standard Gen 1 hubs with only 5 Gbps. The hub can permanently connect several external drives simultaneously and also allows charging of phones and tablets with up to 1.5A/5V current. From the hub, you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc. Another USB-C (PD) connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/120Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3, 4 port and above. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. The compact and slim aluminium body not only looks great, but also provides mechanical durability and passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (connection to laptop): USB 10Gbps (USB 3.2 Gen 2), connector USB-C male. Compatible with USB 3.2 Gen 1, USB4 a Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 100W, USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 2x USB 10Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) with a current of up to 1.5A/5V from the hub's USB-A and USB-C ports. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz.  2K / WQHD resolution 2560 x 1440 at up to 120Hz.  FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4.  For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10-

The multi-port USB-C 5Gbps AXAGON HMC-8HLSA hub 9in1 expands your laptop, computer or phone with nine ports. You can easily and quickly connect a monitor, three USB devices, Gigabit Ethernet network, headphones with microphone and an SD card reader to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The port replicator will thus provide you with a simple and compact 9-in-1 docking station not only for Windows laptops but also for Apple laptops such as MacBook Air or MacBook Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two of them with 5Gbps speed and one with 480Mbps speed for mouse or keyboard connection. The hub can also handle the permanent connection of multiple external drives at the same time. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface.  The USB-C connector is reserved only for charging of phone or laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This will also free up one USB-C port on your laptop. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported.  Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colours and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port, Thunderbolt 4 and above. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The audio output is connected to a 3.5 mm jack and allows the connection of stereo headphones with a microphone.  The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, monitor TV or projector to the phone. Input (laptop connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C female connector. Compatible with USB 3.2 Gen 2, USB4 and Thunderbolt 3/4. Input (power supply): USB Power Delivery 3.0 - 100W (only for charging), USB-C female connector. Charging of the notebook from the power adapter via USB-C hub. PD power must be supported by both the laptop (phone) and the wall charger. USB outputs: 2x USB 5Gbps port, USB-A female connector. 1x USB 480Mbps port, USB-A female connector. USB-C hub can handle connecting multiple external drives at the same time. Video output: 1x HDMI A port, HDMI A female connector. 4K resolution 4096 x 2160 at up to 60Hz.  2K / WQHD resolution 2560 x 1440 at up to 120Hz.  FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4.  For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Dete