Power Supply Charger

Technical details Main Software: Navitel Navigator Pre-installed maps: 47 maps Ability to download additional maps: yes Free map updates: Yes Route calculation function: yes Route time calculation: yes Speed ​​camera warning: yes functions Three alternative routes: Yes Voice Prompts: Yes Screen Screen size: 5" Screen type: TFT Screen resolution: 480×272 Touch Screen: Yes Screen illumination: yes Technical specifications Operating system: Linux CPU: MStar MSB2531, Cortex-A7 CPU frequency: 800 MHz Antenna: Internal Navigation system: GPS Waterproof: No Memory RAM: 128 MB DDR3 ROM: 8GB Flash. Memory card type: microSDHC Maximum card size: 32 GB feed Battery type: built-in lithium-ion Battery capacity: 800 mAh Connecting an external power source (12/24 V): yes Power supply: to the navigator Interfaces Wi-Fi: no Connector: mini USB Headphone jack: mini jack General Fastening to the windshield: suction cup Attachment to the holder: mechanical Stand Bracket: Yes Location of the pen: in the case of the navigator Including: NAVITEL E501 personal navigation device Car holder (windshield) Car charger 12V Mini-USB cable Pen User Guide Warranty card

SkyRC D100neo ChargerThe SkyRC D100neo Charger is equipped with 2 ports, allowing simultaneous charging with a power of 200W when using DC power supply. It supports various types of batteries, including LiPo, LiFe, Li-ion, LiHV, NiMH, and NiCd, and provides voltage balancing function with an accuracy of ±0.02V. The device's performance is also influenced by the high-resolution color display and user-friendly interface, ensuring ease of use. The product is also equipped with a USB-C port with 20W Power Delivery for fast charging. Advanced protective features ensure safe operation.Impressive Power in a Compact FormEach of the D100neo ports supports a current of up to 10A, allowing for fast and efficient charging of 2 batteries simultaneously. Thanks to intelligent power management, the charger maintains stability and accuracy of charging even at full load, ensuring evenly charged cells and extending their lifespan. The device's output power is up to 200W (requires DC power supply), further increasing energy renewal efficiency. Despite impressive specifications, the product stands out with its compact design, being 40% smaller than standard chargers. It also features a color display with an impressive 76,800 pixels, providing convenient access to essential information.Optimal Power ManagementThe SkyRC D100neo Charger combines efficient charging with up to 25W of power and advanced discharging with voltage balancing capability, ensuring optimal battery condition and longevity. The device automatically allocates power between the ports, maximizing the charging efficiency of individual batteries and providing fast charging when using both ports simultaneously. It also provides balancing accuracy up to ±0.02V, guaranteeing voltage optimization for each cell, crucial for extending their lifespan and maintaining full capacity.VersatilityThe D100neo can operate in both AC and DC modes. When powered by AC, power is dynamically distributed between the ports up to a total of 100W, while with DC power supply, each port can reach a full 100W, significantly speeding up the charging process. When both ports are used simultaneously, the charger intelligently manages available power. After one port completes charging, the other receives increased power, maximizing the efficiency of the entire process. Additionally, the device can function as a digital power source with adjustable voltage and current, making it suitable not only for hobbyists but also for electronics enthusiasts and DIYers.Fast ChargingWith the USB-C PD 3.0 port supporting up to 20W of power, RC model enthusiasts can enjoy significantly accelerated charging for their devices, such as smartphones, tablets, and 2020 MacBook Airs.Safety and User-FriendlinessProtection against overcharging and overloading ensures complete safety during charger operation. An innovative thermal system allows the Arm Cortex-M4 processor to operate at high loads without generating disturbing noise. The ColorX interface guarantees ease of use and allows settings adjustments in multiple languages. Additionally, firmware updates can be performed smoothly and effortlessly through USB-C, ensuring that the device is always up to date with the latest software. Another advantage is the universal input voltage (from 110V to 220V), allowing you to take the D100neo model on your travels.Seamless ConnectionThe USB-C port allows for convenient connection of the D100neo charger to a PC or Mac. Using the Charger Master app, you can customize charging parameters, monitor battery status, and optimize performance. Furthermore, software updates are performed smoothly, making it easy to enhance your charger's capabilities. Manufacturer SkyRC Model SK-100199-01 SIZE AND WEIGHT Case Material PC-ABS V0 Case Size 116 x 110 x 79 mm Weight 470 g DISPLAY Display Type TN Size 2.8 inches Panel Active Area 43.20 x 57.60 mm Resolution 240x320 pixels Number of Colors 262,000 POWER DC Input Voltage 10-30V AC Input Voltage 100-240V Charg

Aprašymas: Gamintojas: Product description A powerful and comfortable 125 mm angle grinder that cuts approximately 50 rebar bars with a diameter of 10 mm or nearly twice as many 6 mm plain bars or M8 threaded bars from 4.8 mm steel on a single battery charge. The high speed of 10,000 rpm allows you to work efficiently in places where there is no power supply from the power grid. The design of the switch and its position in the middle part of the power tool make it easy to work. It's great in the hand during work. high revolutions in the class of battery grinders (10,000 / min) guarantee fast cutting with the range of grinding machines protection against overheating of battery cells low level of vibration comfortable side handle compact size spindle lock for easier disc exchange 4-step battery indicator 18 volt system - operation on a common battery, suitable for a series of devices spare 2 Ah batteries (YT-82842), 3 Ah (YT-82843) and 4 Ah (YT-82844) Includes: grinder, Li-Ion 18 V 2 Ah battery, fast charger (1 hour for 2 Ah batteries). Also available as a tool (without battery and charger) - YT-82827. SYSTEM 18 volts The 18 V system is a series of YATO battery tools that are powered by the same durable battery. Each device can be purchased in a set with a battery and a quick charger or a solo, which is an ideal solution when you expand your toolkit. Battery powered gives you freedom and greater comfort of work. In addition, YATO cordless tools are durable, handy and perfectly balanced. So that working with them is a pleasure. Professionalism Power, modernity, refined solutions - all of this is offered in a series of 18 V devices, created for the most demanding users and professionals. Saving There is no need to buy many batteries and chargers for other tools. With the 18 volt system, you save money, space at home and the environment! Choice When your requirements grow, the 18-volt collection also grows. A wide range of tools for home, workshop and garden makes it possible to create a set that you really need. Technical data Index number YT-82826 Brand Yato 18V ANGLE GRINDER; BLADE 115MM*22,2MM; ROTATION SPEED 11000 RPM; SPINDLE LOCK; ANTIVIBRATION SIDE HANDLE; KEYLESS BLADE GUARD; BATTERY 2,0AH; CHARGER 60MIN; BLADE 115MM INCLUDED

LINOGY Universal AA/AAA ChargerThe LINOGY station acts as a smart power bank for AA and AAA batteries, supporting lithium-ion, nickel-metal hydride (NiMH), and nickel-cadmium (NiCd) batteries. Simply place the discharged cells in the upper compartment, and the system will automatically start charging each one separately, monitoring its status and parameters. Once the process is complete, the charged batteries automatically move to the lower storage compartment, creating an organized supply of ready-to-use cells. No sorting, no checking, no wondering which ones are full — you always come back to a set that's ready to go.Faster and safer than traditional chargersIt takes only about 3 hours to fully charge eight AA or AAA batteries, which is up to twice as fast as standard chargers. The intelligent system automatically recognizes the cell type and blocks attempts to charge disposable batteries, increasing safety and protecting your equipment. Each battery is charged individually, which promotes longer life and consistent performance of the entire set. This solution is designed for intensive, everyday use — from remote controls and toys to electronic equipment with higher power consumption.No more chaos in your drawerThe LINOGY station holds up to 40 AA and AAA batteries in one organized space, eliminating the problem of scattered cells and uncertainty about their condition. A single glance is enough to see which batteries are charged and which need power — no testing or guessing required. This solution makes operation almost effortless — empty batteries go to charge, while full ones wait ready in storage.An eco-friendly approach to chargingThe built-in E-Ink display shows the number of charged cells, the estimated reduction in CO₂e emissions, and a growing virtual tree symbolizing the impact of your actions on the environment. Each charging cycle thus becomes a measurable contribution to reducing waste and raw material consumption. The eco-friendly nature of the product is also emphasized by the packaging made of fully recycled paper without plastic and tape, and the charger housing made of RC-65 polycarbonate containing 65% post-consumer recycled material. This is an example of a circular economy in an everyday product. Charger dimensions 210 × 100.8 × 91.5 mm Weight 606 g Input USB-C 5V 3A Number of charging slots 8 Number of storage slots 40 Compatible batteries Li-ion, Ni-MH, NiCd

Double the power and mobilityThe SkyRC T200 charger has the most compact design, taking up minimal space, the tick of a pair of batteries. The charger delivers 100 watts of integrated power through each charging circuit. Behind the tasteful casing is enough power to charge two batteries simultaneously at up to 12 amps per channel, so you'll be pumping life into a wide range of batteries in no time, from receiver packs to 6S lithium polymer or NiMH and NiCD 15S batteries. What's more, the charger provides all the programmability you expect from a modern high-end charger. Multiply efficiencyBoth charging channels can be programmed and operated individually. The T200 allows two batteries to be charged intelligently, automatically and simultaneously to their maximum capacity. What's more, the cells being charged do not have to have the same configuration or be of the same type. Feel completely free to choose which packs to charge. Compatibility and universal XT60 plugThe charger has a charging algorithm that allows it to work with the most common battery types - LiPo, LiIon, LiHV, LiFe, NiMH, NiCD and Pb. The XT60 interface prevents reverse polarity and ensures a very stable connection.Optimised softwareThe SkyRC T200 has a so-called AUTO function, which automatically sets the current during charging and discharging. For lithium batteries in particular, the function helps prevent overcharging, which can lead to an explosion due to the user. The function automatically shuts down the circuit and informs the user when an abnormality is detected. All programmes on the T200 are controlled by a two-way signal to ensure maximum safety and minimise problems. All settings can be configured by the user.Intuitive operationA panel of five buttons and a brightly illuminated LCD screen make operation of the unit effortless, even for inexperienced users. The charging programmes work in a similar way to other SkyRC chargers, but even if this is your first contact with a programmable charger, you will easily move between parameters by using the up and down arrows to set values and then clicking enter to confirm.Versatility with AGM and cold modesAGM batteries are easy to maintain, are very stable and lighter than other lead-acid batteries. Although they have the same structure, the difference in chemical components translates into a big difference in performance. AGM batteries should not be charged with a normal charger in Pb mode. Cold mode allows the battery to be charged at a low temperature.Adjustable terminal voltageThe SkyRC T200 allows users to change the terminal voltage (for advanced users only).Special handleThe charger is equipped with a special handle. Its compact design at less than 1 kg makes it the most convenient charger to carry.Included T200 charger Power cable Power supply DC 11-18 V, AC 100-240 V Charging power 100 W x 2 Discharge power 10 W Battery type LiPo/LiIon/LiFe/LiHV 1-6S, NiMH/NiCd 1-15S, Pb 2-20V Battery capacity LiPo/LiIon/LiFe/LiHV 100-50000 mAh, NiMH / NiCd 100-50000 mAh, Pb 100-50000 mAh Charging current 0,1 - 12 A Discharge current 0,1 - 2 A Charging voltage LiPo: 4.18-4.25V/cell, LiIon: 4.08-4.2V/cell, LiFe: 3.58-3.7V/cell LiHV: 4.25-4.5V/cell, NiMH/NiCD - Delta-Peak detection, Pb Normal: 2.4V/cell, Pb AGM: 2.45V, Pb Cold: 2.45V Discharge voltage LiPo: 3.0-3.3V/cell, LiIon: 2.9-3.2V/cell, LiFe: 2.6-2.9V/cellLiHV: 3.1-3.4V/cell, NiMH/NiCD - 0.1-1.1V/cell Balancer 2-6S Housing material Plastic Dimensions 178 x 135 x 96 mm Weight 850 g Timer 1-120 minutes Operating temperature 0℃-40℃ Display 2x16 LCD with backlight External ports XH 1-6S balancer socket, temperature sensor port, battery port, DC input , Podwójna moc i mobilnośćŁadowarka SkyRC T200 posiada najbardziej kompaktowa konstrukcję, zajmując minimalną ilość miejsca, tyko tyle co para akumulatorów. Ładowarka dostarcza 100 watów zintegrowanej mocy przez każdy z obwodów ładowania. Za gustowną obudową znajduje się wystarczająca moc, by ładować jednocześnie dwa

10.1 inch quad-core Android tablet with Android 10GO 10.1-inch capacitive touchscreen with resolution: 1024x600 - 16:9 1.2GHZ quad-core RK3226 processor 16 GB / 2 GB (Memory / RAM) Micro SD card slot Integrated WI-FI 802.11 b/g/n connection. Full access to Google Playstore. Bluetooth 4 function Camera - 0.3 pixels Integrated rechargeable battery - 4400 mAh Connections: MicroUSB for charging, MicroSD card slot, 3.5 mm headphone output Power supply: 230V charger Size: 28.00 (L) X 16.50 (W) X 4.50 (H) cm

USB-C hub with 9 ports, if you lack (or need to expand) slots on your PC, laptop, MacBook, tablet, or if you need to connect/disconnect multiple devices centrally via one connection Removable legs for space saving or transport Rubberized feet for a secure non-slip stand Plug and play, no manual software/driver installation required Compatible with Thunderbolt 3/4 (lightning bolt icon) Power is via USB Ports: 4x USB-A: e.g. external hard drive, USB flash drive, mouse, keyboard, printer 1x USB-C power supply: e.g. PD charger, PD power supply, PD power supply unit 1x HDMI™: for connection to e.g. monitor, TV, projector 1x LAN/Ethernet: e.g. wired internet network connections 1x SD card reader: e.g. SD, SDHC, SDXC memory cards 1x microSD card reader: e.g. microSD, microSDHC, microSDXC memory cards Requirements Operating system: Windows 11/10/8/7 and Mac OS from 10.8 To use the USB-C charging function, the device must support USB Power Delivery (USB PD) or Thunderbolt 3/4. To use the monitor function over HDMI™, the device must support DisplayPort Alternate Mode (DP Alt Mode), Thunderbolt 3/4 or USB4. Dimensions Case width: 28.2 cm Body height: 3.3 cm Body depth: 6 cm Cable length: 0.2 m Number of ports 5 Type of ports USB 3.2 Gen 1 USB standard USB-A, USB-C Fast charging Power Delivery Feeding USB Dimensions (cm) 28.2 x 3.3 x 6 Color Gray

Design LED Desk Lamp with Inductive Charging Station/Qi Wireless Charger and USB Connections Unique design with energy-saving LED technology Side LED panel (120° adjustable) for softer and more even lighting The lamp head can be turned sideways 180 ° Touch sensor with adjustable brightness from 10% to 100% and adjustable light temperature from 2700K to 6500K for pleasant lighting Inductive charging station for wireless charging for all Qi-enabled smartphones or devices with Qi-compatible covers 2 Smart Quick USB ports for charging your smartphone or tablet and connecting mobile devices, for example. the speaker Power consumption: 120 W Dimensions: approx. 275mm x 60mm x 320mm (folded) Power consumption: Max: 60 W (power supply) Min: 0.5 W (LEDs off, devices not connected) Maximum power: USB connections, total: 5 V, max. 2 A, DC (DC) Qi wireless port: 5V, max. 2 A, DC (DC) Energy efficiency class: A Luminaire: 108 Osram / Philips high power LEDs, max. 5 W total power Illumination: 950 lux at a distance of 30 cm (adjustable) Color temperature: 2700K to 6500K, warm white / cool white (adjustable)

2UUL PC01 POWER MAX 200W Multi-Port Charger Adjustable Voltage Power Supply PlugUS Plug

2UUL PC01 POWER MAX 200W Multi-Port Charger Adjustable Voltage Power Supply PlugEU Plug