Qd led monitors

SmallRig Half Cage for Sony A6700 / A6600 / A6500 / A6400 4337 is designed to attach accessories and protect the camera. It secures the camera in two-point firmly via one 1/4"-20 screw on the bottom and one M2.5 screw on the left side. Lightweight and portable, the easy-to-use half cage gives full access to dials and buttons, with built-in cushions preventing scratches. There are multiple mounting points for accessories, including 1/4"-20 holes and ARRI 3/8"-16 locating holes for Top Handle 3765, Side Handle 2913; one top ARRI 3/8"-16 locating hole for Monitor Mount 2903B; cold shoes for microphone, LED video light; a NATO rail for Rotating NATO Handle (Left Side) 3260; and a bottom QD socket for attaching shoulder straps. The Arca-Swiss quick-release plate on the bottom supports DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals as well as DJI RS 2 / RSC 2 gimbals’ quick-release plate and Arca-Type Quick Release Plate 3154. The cage also reserves a wrist strap hole at the bottom, compatible with Hand Strap 3848. Besides, a magnetic Allen wrench is included for easy disassembly and assembly. 1. Lightweight, easy-to-use, half-cage design for enhanced and convenient handgrip experience.2. Two-point locks the camera via one 1/4"-20 screw on the bottom and one M2.5 screw on the left side.3. Arca Swiss quick-release plate on the bottom for fast switching between tripod and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals.4. Comes with multiple mounting points like 1/4"-20 threaded hole, ARRI 3/8"-16 locating hole, cold shoe, and QD mount for handle, microphone, LED video light, monitor, etc. Note:1. Please remove the strap ring on the left side of the camera before installing this half cage. Please refer to the user manual for installation.2. Incompatible with Sony HVL-F32M and ECM-W2BT when mounted onto Sony Alpha 6600 / 6500 / 6400. Compatible WithSony A6700Sony A6600Sony A6500Sony A6400 Half Cage x 1User Manual x 1 Product Dimensions: 94 x 91 x 53.8mm / 3.7 x 3.6 x 2.1inPackage Dimensions: 137 x 104 x 51.5mm / 5.4 x 4.1 x 2inProduct Weight: 104±5g / 3.7±0.2ozPackage Weight: 146±5g / 5.2±0.2ozMaterial(s): Aluminum Alloy, Stainless Steel

SmallRig 4336 Cage Kit for Sony A6700 The cage secures the camera firm via one 1/4"-20 screw on the bottom and one M2.5 screw on the right side, with built-in cushions preventing scratches. Its hinge arm at the battery door better fits the camera curve and leaves room for the pinkie for more comfort. The HDMI cable clamp quickly attaches to the left side of the cage by using a thumb screw, protecting the HDMI port and ensuring stable transmission. Comes with multiple mounting points for attaching accessories including 1/4"-20 threaded holes and ARRI 3/8"-16 locating holes for SmallRig Top Handle 3765 , Side Handle 2913 one top ARRI 3/8"-16 locating hole for SmallRig Monitor Mount 2903 cold shoes for microphone, LED video light a NATO rail for SmallRig Rotating NATO Handle (Left Side) 3260 and a bottom QD socket for mounting shoulder straps. The Arca Swiss quick-release plate on the bottom supports DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals as well as DJI RS 2 / RSC 2 gimbals’ quick-release plate and SmallRig Arca-Type Quick Release Plate 3154 . The cage also reserves holes on both sides and the bottom for attaching accessories like SmallRig Hand Strap 3848 , Shoulder Strap 2428 , etc. Besides, a magnetic Allen wrench is included for easy disassembly and assembly. Compatibility: Sony Alpha 6700 Packaging including: 1x Cage 1x HDMI Cable Clamp 1x User Manual

SmallRig 4183 Cage For Sony FX30 / FX3 (New Version) The NATO rail is secured on the top via two 1/4"-20 screws and removed to allow installing the original XLR top handle. The U-shaped cage is fixed via 1/4"-20 screws on both sides and at the bottom to prevent twisting. It have a cushion to save the camera against scratches. At the battery door, there is a hinge arm that fits the camera curve for an improved grip experience for a little finger. A dedicated HDMI cable clamp protects interfaces to ensure stable signal transmission. Among its varied accessory mounts 1/4"-20 holes support SmallRig Magic Arm 2070 ARRI 3/8"-16 locating holes connect SmallRig Top Handle 2165 or Monitor Mount 2903 The top NATO rail supports SmallRig Top Handle 3322 , and the left one, Side Handle 2187 1/4"-20 locating holes at the top-left quarter and on the left side attach SmallRig Rod Clamp 3598 for follow focus Two 1/4"-20 holes on the right side allow being securely mounted onto a quick release plate for vertical shooting The cold shoe mount supports microphone & LED light and the QD port at the bottom fits QD strap. An Arca-Swiss quick-release plate at the bottom can attach DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro directly or a quick-release plate (height increase pad) for DJI RS 2 / RSC 2 gimbal and SmallRig Arca-Type Quick Release Plate 3154 . Both sides and the bottom have holes for SmallRig Hand Strap 3848 and Shoulder Strap 2428 . A magnetic spanner is also included for easy assembly and disassembly. Combability: Sony FX30 Sony FX3 Package includes: 1 x Cage 1 x NATO rail 1 x HDMI Cable Clamp 2 x 1/4”-20 Screw

SmallRig Cage for Canon EOS R8 4212 is designed to protect the camera and attach accessories. Locking the camera via one bottom 1/4 "-20 screw and two side lock adapters, the cage comes with rubber pads that prevent scratches and gives full access to buttons, card slots, flip screen, and battery door. Among its accessory mounts, 1/4"-20 threaded holes, 3/8"-16 threaded holes, and ARRI 3/8"-16 locating holes support Top Handle 3765, Side Handle 2093C, Monitor Mount 2903B, and Magic Arm 3875; The top cold shoe mount attaches Microphone 3468, LED Video Light 3286B; and the left NATO rail fits Rotating Side Handle 3260 & 3813. Also, there is a QD socket for a quick-release shoulder strap buckle and a bottom Arca-Swiss quick-release plate for an Arca-type tripod or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbal for a quick switch between gimbal, handheld and tripod shooting. A screwdriver is included for easy assembly and disassembly.

SmallRig 4230 Cage for Fujifilm X-S20 Locking FUJIFILM X-S20 via one 1/4"-20 screw on the bottom and one M2.5 screw on the right side of the cage. Comes with rubber pads that prevent scratches, and gives full access to buttons, card slots, flip screen and battery door. Among its accessory mounting points 1/4"-20 threaded hole, 3/8"-16 threaded hole and ARRI 3/8"-16 locating hole to support SmallRig Side Handle 2093 & 3814 , Top Handle 3765 , Monitor Mount 2903 & 2904 , HDMI Cable Clamp 3637 , Manfrotto Plate 1280 & 2458 , Holder for Portable Power Banks 2336 and mini V Mount Battery Plate 2987 1/4"-20 locating hole fits SmallRig Single Rod Clamp 3598 and Magic Arm 3873 . Besides, there are two cold shoes for attaching microphones and LED video lights for Vlogging, Strap holes for Hand Strap 3848 & 2456 and QD mounts for QD strap buckle. The bottom Arca Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for quick switch between gimbal, handheld and tripod modes. A double-ended wrench is also included for easy disassembly and assembly. Note: HDMI Cable Clamp 3637 may jam the LCD flip screen Compatibility: FUJIFILM X-S20 Package includes: 1x Cage 1x User Manual

SmallRig Cage for Nikon Z 8 3940 is designed to protect the camera and attach accessories. Locking the camera via one bottom 1/4 "-20 screw, one locating screw, and one side lock adapter on the right, the cage features rubber pads that prevent scratches and gives full access to buttons, card slots, flip screen, and battery door. Among its accessory mounting points, 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole support Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Plate 1280, mini V Mount Battery Plate 2987; side 1/4"-20 locating hole fits Single Rod Clamp 3598 and Magic Arm 3873; and left NATO rail quickly connects Side Handle 3847 & 4017. Besides, there are cold shoe mounts for the microphone and LED video light; strap holes for Hand Strap 3848; and QD mounts for the QD strap buckle. The bottom Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between gimbal, handheld, and tripod modes. A double-ended wrench is also included for easy disassembly and assembly. 1. Full cage protects the camera without blocking buttons. 2. Locks camera via one 1/4"-20 screw at the bottom, one locating screw, and one side lock adapter on the right. 3. 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole, cold shoe mount, NATO rail, QD mount, strap slot. 4. Arca-Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals. Note: Please remove the split ring on the right of the camera before installing this cage. Compatible With Nikon Z 8 Cage x 1 User Manual x 1 Product Dimensions: 159.1 x 56.8 x 131.0mm Package Dimensions: 184.0 x 178.0 x 80.0mm Product Weight: 203.0 ± 5.0g Package Weight: 371.5 ±5.0g Material(s): Aluminum Alloy

SmallRig Camera Cage for Nikon Z f 4261 is designed to protect the camera, attach accessories, and improve grip. It locks Nikon Z f via one 1/4“-20 screw on the bottom and one M2.5 screw on the right, with rubber pads preventing scratches. The cage comes with an ebony handle, ergonomically designed for comfortable grip and texture, and maintains full access to buttons, card slots, a flip screen, and a battery door. On the top, it shares elements and usage experience with Nikon Z f. Just press to control the dial. Among its mounting points, 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole and cold shoe support Side Handle 2093C / 4016 / 3847, Top Handle 3765, Monitor Mount 2903 / 2904, mini V Mount Battery Plate 2987, Single Rod Clamp 3598, Magic Arm 3873, Microphone 3468, LED Video Light 4055, etc. Besides, there are strap holes for Hand Strap 3848 / 3926, Neck Strap 3485, QD mounts for Shoulder Strap 4118, and a bottom Arca Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for quick switch between gimbal, handheld and tripod modes. A double-ended wrench is also included for easy accessory disassembly and assembly.

SmallRig Cage Kit for Sony Alpha 7 III / Alpha 7R III 4198 is designed to facilitate a low-angle shot and protect the camera while offering a wide range of accessory mounts. It includes a cage, an HDMI cable clamp, and a top handle. The top handle feels comfortable and enables easy carrying at a low-angle shot. 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes, cold shoes and NATO rails and QD socket support monitor mount 2294, microphones, LED lights, monitor mount 2903B, NATO accessories. The HDMI cable clamp, mounted onto the left side of the cage via two 1/4"-20 screws, prevents deflection and fixes cables with a thumbscrew to protect interfaces and ensure stable signal transmission. In addition, holes on both sides of the cage allow for attaching hand straps. The cage comes with a built-in magnetic flat-head screwdriver & hex spanner for easy disassembly and assembly. 1. Portable handheld kit for an easy low-angle shot. 2. Triple-point locking for enhanced stability and anti-twist. 3. HDMI cable clamp protects interfaces and ensures stable signal transmission. 4. A hinged arm at the battery door fits the camera curve and enhances the grip experience. 5. Multiple mounting points: 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes, cold shoe mounts, NATO rails and QD socket support handles, microphones, LED lights, monitors, etc. Note: Please remove the split D-ring on both sides of the camera before installing the cage. Compatible With Sony Alpha 7 III Sony Alpha 7R III 1 x Cage 1 x HDMI Cable Clamp 3637 1 x ARRI Locating Handle 3765 2 x Allen Wrench 2 x 1/4''-20 Screw Product Dimensions: 150.2 x 135.0 x 175.0mm Package Dimensions: 180.0 x 129.5 x 75.0mm Product Weight: 315.0±5.0g Package Weight: 400.0±5.0g Material(s): Aluminum Alloy, Stainless Steel, Silicone

SmallRig HawkLock Quick Release Cage for Canon EOS R6 Mark II 4159B is designed to provide protection and attach accessories. It locks the camera via one 1/4"-20 screw at the bottom and one side lock adapter on both sides, with rubber pads preventing scratches. The cage maintains access to the camera button, card clot, screen, and battery door and comes with multiple accessory mounts. They include, among others, a 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole that supports Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Bottom Plate 1280 & 2458, Holder for Portable Power Banks 2336 and mini V Mount Battery Plate 2987. 1/4"-20 locating holes on both sides fit Single Rod Clamp 3598  and Magic Arm 3873, and two 1/4"-20 threaded holes in the horizontal direction on the right side ensure stable vertical shooting. 1. One-piece full cage protects the camera.2. Locks the camera via one 1/4 "-20 screw and two side lock adapters.\3. Accessory mounting points: 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole, HawkLock H18 cold shoe mount, HawkLock H21 NATO rail, QD socket, hand/shoulder strap hole, etc.4. Built-in HawkLock H21 NATO rails for quick attachment of NATO clamp accessories.5. Two 1/4"-20 threaded holes on the right side ensure stable vertical shooting.6. HawkLock H38 Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 / RS 4 / RS 4 Pro stabilizers. SmallRig HawkLock Quick Release Cage for Canon EOS R6 Mark II 4159B is designed to provide protection and attach accessories. It locks the camera via one 1/4"-20 screw at the bottom and one side lock adapter on both sides, with rubber pads preventing scratches. The cage maintains access to the camera button, card clot, screen, and battery door and comes with multiple accessory mounts. They include, among others, a 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole that supports Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Bottom Plate 1280 & 2458, Holder for Portable Power Banks 2336 and mini V Mount Battery Plate 2987. 1/4"-20 locating holes on both sides fit Single Rod Clamp 3598  and Magic Arm 3873, and two 1/4"-20 threaded holes in the horizontal direction on the right side ensure stable vertical shooting. On its top and left side are HawkLock H21 NATO rails for NATO Top Handle 3766, 4438, Monitor Mount 2906B, and Rotating NATO Side Handle 3847, 4485. The cage also features a HawkLock H18 cold shoe mount to attach microphone, LED video light, etc., strap holes for Hand Strap 3848 & 2456, as well as a QD socket, an innovative strap slot for downward hanging for extra lens protection compatible with the Quick Disconnect System for shoulder strap. Another highlight is the HawkLock H38 Arca-Swiss quick-release plate, which supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro stabilizers for a quick switch between stabilizer, handheld, and tripod modes. Besides, there is a double-head wrench for easy disassembly and assembly. Compatible With Canon EOS R6 Mark II 1 x Cage2 x Side Lock Adapter1 x User Manual Product Dimensions: 152.5 x 64 x 116.5mm Package Dimensions: 180 x 129.5 x 75mmProduct Weight: 172g ± 5gPackage Weight: 249.5g ± 5g Material(s): Aluminum Alloy

SmallRig Handheld Cage Kit for Sony FX30 / FX3 4184 is designed to protect camera and provide accessory mounting points, hence improved shooting experience. The kit includes a cage, a HDMI cable clamp, a XLR handle extension rig and a hand strap. Among them, the extension is ergonomically designed for comfortable grip and equipped with accessories mounts; Hand Strap 3848 helps increase stability and safety; the dedicated HDMI cable clamp protects interfaces to ensure stable signal transmission. Overall, the kit comes with 1/4"-20 threaded holes for Magic Arm 3873 for monitor; ARRI 3/8"-16 locating holes for Monitor Mount 2903B, Side Handle 2914; cold shoe mounts for microphone, LED light; 1/4"-20 locating holes at the top-left quarter and on the left side for Rod Clamp 3598 for follow focus; and a NATO rail on the left side for Side Handle 2187B. An Arca-Swiss quick release plate at the bottom allows for quick switch between tripod mode and handheld mode. Besides, a slotted screwdriver is included for easy assembly and disassembly. 1. Handheld cage kit for Sony FX30 / FX3, with hand strap to facilitate shooting.2. XLR handle extension for improved grip experience and added accessory mounts.3. Dedicated HDMI cable clamp ensures stable signal transmission.4. 1/4"-20 threaded holes, ARRI 3/8"-16 locating holes, cold shoe mounts, NATO rails, QD port for handle, microphone, LED light, monitor, hand strap, etc.5. Arca-Swiss quick release plate at the bottom for quick switch between tripod mode and handheld mode. Compatible WithSony FX30Sony FX3 1 x Cage2 x NATO Rail1 x HDMI Cable Clamp1 x XLR Handle Extension Rig1 x Hand Strap2 x 1/4”-20 Screw1 x Allen Wrench Product Dimensions: 159 x 118 x 165mmPackage Dimensions:180 x 129.5 x 78mmProduct Weight: 318±5gPackage Weight: 424±5gMaterial(s): Aluminum Alloy, Stainless Steel, PU Leather, Microfiber Leather

SmallRig “Black Mamba” Camera Cage for Canon EOS R6 Mark II 4161 is designed to protect the camera and attach accessories. It locks Canon EOS R6 Mark II via one bottom 1/4"-20 screw and two side lock adapters, with rubber pads preventing scratches. Featuring “Black Mamba” design, this cage has full access to all camera buttons and multiple accessory mounting options. Among them, ARRI 3/8"-16 locating hole supports Top Handle 3765 / 2165C and Monitor Mount 2903B; 1/4"-20 threaded holes fit with Side Handle 4016; the built-in cold shoe mount holds microphone, LED video light; and shoulder & wrist strap holes work with Hand Strap 3848 or Shoulder Strap PSC2428. There is an integrated Arca-Swiss quick release plate on the bottom for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals or Arca-type tripods for quick switch between handheld, gimbal, and tripod mode as well as a QD mount for quick-release shoulder strap buckle. Also, a double-ended screwdriver is included for easy assembly and disassembly. 1. Adapts bionic design, and offers full access to top bottons; The streamlined full cage comes with full-rounded cushions to protect the camera;2. Features multiple mounting points, such as 1/4"-20 & 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole; cold shoe mount, shoulder & wrist strap hole, QD mount for attaching handle, microphone, LED video light, monitor, shoulder & wrist strap, etc.;3. Features a built-in Arca-Swiss quick release plate for DJI RS 2/ RSC 2/ RS 3/ RS 3 Pro gimbals or Arca-type tripods;4. Anti-twist three-point locking design;5. Built-in wrench for easy mounting and release. Compatibility:Canon EOS R6 Mark II In the Box:Cage x 1