RS 3 Pro

Service protection with DJI Care Refresh Electronic codes are shipped Monday through Friday from 8:00 a.m. to 4:00 p.m. to the email address you provided when placing your order.DJI Care Refresh is service protection for your device that will provide you, for a small additional fee, two replacements of damaged equipment per year. It covers damage caused by, among other things, collisions or product contact with water. Damaged hardware will then be replaced with new or equivalent new hardware. DJI Care Refresh can be activated one time up to 30 days after activation (first launch) of the device. It is also possible to extend the protection - just purchase an additional one-year plan (up to two times - you gain up to 3 years in total). What's more, the official manufacturer's warranty applies during the validity period of the service.DJI Osmo Mobile 7PFor DJI Osmo Mobile 7P series devices, the cost of each replacement under DJI Care Refresh is PLN 55*.*When reported directly to the manufacturer, the replacement amount is subject to change depending on the current exchange rate.Extended warrantyUsers of devices such as DJI Mavic 3 Pro, DJI Mavic 3 Pro Cine, DJI Mini 2 SE, DJI RS 3 Mini, DJI Mini 3, DJI Mavic 3 Classic, Osmo Mobile 7, Osmo Mobile 7P, Osmo Mobile 6, Osmo Mobile SE, Osmo Action 3, DJI Avata, DJI RS 3, DJI RS 3 Pro, DJI Mini 3 Pro, DJI Mavic 3, DJI Mavic 3 Cine and DJI Action 2 can also get additional benefits. If you don't use the Care Refresh service once during the validity period, you'll receive a warranty extension for an additional year as a reward.How to activate DJI Care Refresh1 Activate the code at:https://support.dji.com/care/active.2. during the activation process, you need to provide the Care Refresh code, the serial number of the device (it is located directly on the product) and the details of the person activating the Package (name, email address).3. the DJI Care Refresh service will be activated and automatically assigned to the corresponding region. You will receive confirmation of DJI Care Refresh activation by email. Your equipment is now safe!When an accident happens1 The user reports the malfunction and sends the equipment to DJI's German service center with a note that he has purchased the DJI Care Refresh service.2) The user gets a repair quote and, based on this, decides whether to have the repair/replacement done for a fee or through DJI Care Refresh.3) After selecting DJI Care Refresh, the user pays the replacement fee and receives another unit.4. The replaced product is shipped to the user on a priority basis with free shipping.DJI Care Refresh does not cover1) Lost or partially lost equipment.2) Stolen or abandoned product.3) Additional accessories.4) Intentional loss of the product.5) Damage to the case that does not affect the operation of the product.6) Direct or indirect damage caused by acts of God.7) Defects occurring outside the validity period of DJI Care Refresh.8) Additional charges related to upgrading the model, improving its performance.9) Defects resulting from carrying out modifications that are not in accordance with the recommendations found in the User's Manual or from using incompatible batteries and charger.10) Defects resulting from the use of unauthorized accessories, batteries or software.

Service protection with DJI Care RefreshElectronic codes are shipped Monday through Friday from 8:00 a.m. to 4:00 p.m. to the email address you provided when placing your order. DJI Care Refresh is service protection for your device that will provide you, for a small additional fee, two replacements of damaged equipment per year. It covers damage caused by, among other things, collisions or product contact with water. Damaged hardware will then be replaced with new or equivalent new hardware. DJI Care Refresh can be activated one time up to 30 days after activation (first launch) of the device. It is also possible to extend the protection - just purchase an additional one-year plan (up to two times - you gain up to 3 years in total). What's more, the official manufacturer's warranty applies during the validity period of the service.DJI Osmo Mobile 7For DJI Osmo Mobile 7 series devices, the cost of each replacement under DJI Care Refresh is 39 PLN*.*When reported directly to the manufacturer, the replacement amount is subject to change depending on the current exchange rate.Extended warrantyUsers of devices such as DJI Mavic 3 Pro, DJI Mavic 3 Pro Cine, DJI Mini 2 SE, DJI RS 3 Mini, DJI Mini 3, DJI Mavic 3 Classic, Osmo Mobile 7, Osmo Mobile 7P, Osmo Mobile 6, Osmo Mobile SE, Osmo Action 3, DJI Avata, DJI RS 3, DJI RS 3 Pro, DJI Mini 3 Pro, DJI Mavic 3, DJI Mavic 3 Cine and DJI Action 2 can also get additional benefits. If you don't use the Care Refresh service once during the validity period, you'll receive a warranty extension for an additional year as a reward.How to activate DJI Care Refresh1 Activate the code at:https://support.dji.com/care/active.2. during the activation process, you need to provide the Care Refresh code, the serial number of the device (it is located directly on the product) and the details of the person activating the Package (name, email address).3. the DJI Care Refresh service will be activated and automatically assigned to the corresponding region. You will receive confirmation of DJI Care Refresh activation by email. Your equipment is now safe!When an accident happens1 The user reports the malfunction and sends the equipment to DJI's German service center with a note that he has purchased the DJI Care Refresh service.2) The user gets a repair quote and, based on this, decides whether to have the repair/replacement done for a fee or through DJI Care Refresh.3) After selecting DJI Care Refresh, the user pays the replacement fee and receives another unit.4. The replaced product is shipped to the user on a priority basis with free shipping.DJI Care Refresh does not cover1) Lost or partially lost equipment.2) Stolen or abandoned product.3) Additional accessories.4) Intentional loss of the product.5) Damage to the case that does not affect the operation of the product.6) Direct or indirect damage caused by acts of God.7) Defects occurring outside the validity period of DJI Care Refresh.8) Additional charges related to upgrading the model, improving its performance.9) Defects resulting from carrying out modifications that are not in accordance with the recommendations found in the User's Manual or from using incompatible batteries and charger.10) Defects resulting from the use of unauthorized accessories, batteries or software.

Pure Paws ādas atjaunojošs aerosols kaķiem ir neticami barojošs atjaunojošs aerosols, kas satur tādas sastāvdaļas kā alveja, šī sviests, keratīns, pantenols, kvinojas keratīns un E vitamīns, kas pazīstams kā jaunības vitamīns. Paredzēts kaķu apmatojuma kopšanai, šis produkts piegādā vielas matu folikulām, stimulējot šūnu aktivitāti un veicinot stipru, bojājumiem izturīgu un spīdīgu matu augšanu. E vitamīns un hidrolizētas kvinojas sēklas formulā palīdz noslēgt matu struktūru un uzlabot mikrocirkulāciju ādā. Turklāt tas intensīvi mitrina sausu un kairinātu ādu kaķiem. Pateicoties augstajam flavonoīdu daudzumam, šim produktam piemīt antioksidanta īpašības. Atjaunojošā darbība sākas matu folikulā, padarot šo aerosolu efektīvāku nekā citi līdzīgi produkti. Lietošanas instrukcija: 1. solis: Mazgājiet kaķi ar šampūnu 2. solis: Pirms lietošanas sakratiet aerosolu 3. solis: Ar roku atdaliet matu sekcijas un izsmidziniet atjaunojošo aerosolu uz kaķa ādas 4. solis: Masējiet ādu dažas minūtes 5. solis: Izžāvējiet matus ar fēnu Sastāvdaļas: Ūdens, Dimetikons, Butyrospermum Parkii (Šī sviests) ekstrakts, Lecitīns, Tokoferilacetāts, Izododekāns, Polisorbāts 80, Butilēnglikols, Glicerīns, Hidrolizēts keratīns, Aloe Barbadensis lapu sula, Pantenols, Simmondsia Chinensis (Jojoba) sēklu eļļa, Ksantāna sveķi, PEG-8 Dimetikons, PEG-8 Ricinoleāts, Akrilāti/C10-30 Alkila akrilāta krustpolimērs, Fenoksietanols, Kaprīlglikols, Nātrija hidroksīds, Smarža.

Puluz adjustable sports camera mount with clampThe Puluz PU740B is a sturdy and versatile mount that will work well in many situations - from dynamic shots on the move to stable frames in unusual locations. Made of sturdy materials, it provides durability and resistance to heavy use, both outdoors and indoors.Tailored to youAn 8-position adjustable flexible arm allows you to freely adjust the camera's angle, making it easy to get interesting perspectives. The sturdy clamp fits surfaces from 0.6 to 5 cm in diameter, so you can mount it on a pipe, countertop, tripod or even a branch, for example.Several mounting optionsThe PU740B offers various mounting options - you can attach a sports camera directly, use an adapter with a 1/4-inch screw to attach a compact camera, or use a phone mount.Included clamp adjustable handle arm phone holder mount adapter ¼" long screw Manufacturer Puluz Model PU740B Color black Compatibility DJI: Osmo Action 5 Pro, Osmo Action 3, Action 2, Osmo Action; Gopro: HERO (2024), HERO13, HERO12, HERO11 Mini, HERO11 Black, HERO10, HERO9, HERO8, MAX, HERO7, NEW HERO, HERO6, HERO5, HERO5 Session, Hero Session, HERO4 Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO; Insta360: X5, X4, Ace, Ace Pro, X3, ONE RS 1-Inch 360 Edition, Insta360 ONE RS 4K Edition, Insta360 ONE RS 360 Edition, Insta360 ONE RS 1-INCH EDITION, ONE X2

PULUZ motorcycle helmet mount for sports camerasExperience a new quality in sports camera mounting with the Puluz mount. Our innovative magnetic design not only eliminates the cumbersome installation process, but also ensures a reliable hold on your camera. Thanks to a strong samarium-cobalt-neodymium magnet, the mount will hold steady even during extreme rides.Perfect protection and fitThe Puluz brand mount makes sure that your helmet is fully protected. The thickened protective silicone pad gently adapts to the surface of the helmet, minimizing the risk of damaging it. The curved shape of the mount makes it a perfect fit for any helmet, offering the stability you need to take professional photos and videos.Convenient and fast installationThe Puluz mount provides convenience with a quick-switching function between landscape and portrait modes. The quick-release button and buttons for shooting horizontally and vertically are made of anodized alloy, which guarantees their durability and precise operation. The entire installation and removal operation takes just 1 second, allowing you to adjust the camera to your needs in no time.Versatility and comfortRegardless of the type of helmet, the Puluz mount is designed to fit all models. Thanks to the simplicity of installation and removal, you can easily adjust and control your camera to capture every important moment in your motorcycle adventure. Get ready to record your rides even better and enjoy maximum comfort and stability with the Puluz motorcycle helmet mount!Included motorcycle helmet holder chin strap with quick release adapter quick release adapter long screw Manufacturer Puluz Model PU1052B Compatibility DJI: Osmo Action 4, Osmo Action 3, Action 2, Osmo Action ; Gopro: HERO12 Black, HERO11 Black Mini, HERO11 Black, HERO10 Black, HERO9 Black, HERO8 Black, MAX, HERO7 White, HERO7 Black, HERO7 Silver, NEW HERO, HERO6 Black, HERO5 Black, HERO5 Session Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO ; Insta360: X4, Ace Pro, X3, Insta360 ONE RS 4K Edition, Insta360 ONE RS 1-INCH EDITION, Insta360 ONE RS 360 Edition, ONE R Material silicone, anodized alloy

Puluz 150 cm metal selfie holder for Insta360 One RS / X2 / X3 / X4Ensure versatility and convenience when recording with the PULUZ metal selfie grip. This durable and lightweight selfie stick, made of aluminum alloy, is ideal for sports and panoramic cameras such as Insta360 and GoPro. It offers 5-position length adjustment and is very comfortable to use.Thoughtful designThe PULUZ mount was created from high-quality aluminum alloy for durability and strength. The thicker tube design allows you to enjoy a higher lifting capacity and use a wide variety of devices, and the anodizing process makes the entire surface resistant to scratches and corrosion. In addition, the rubber non-slip handle guarantees a firm grip and comfort while preventing sweaty hands.Adjustable lengthThe handle allows 5-position length adjustment from 35 cm to as much as 150 cm. Each segment can be locked individually, allowing you to fine-tune the accessory to your needs. This makes the selfie stick extremely versatile and works in many different situations. It is ideal for taking selfies, panoramic photos and more!Universal mountThe base of the grip is equipped with a 1/4-inch hole, which allows you to connect it to a tripod or extension. What's more, its top has a 1/4-inch screw, to which you can connect your camera, phone holder or adapter. This allows you to freely use a variety of devices and accessories.Practical and functionalWhen folded, the length of the mount is only 35 cm, which makes it very easy to carry and store. This makes it the perfect companion for travel and outdoor activities! In addition, the selfie stick is distinguished by its wide compatibility - it perfectly fits many sports and panoramic cameras of well-known brands, such as DJI, GoPro or Insta360. Manufacturer PULUZ Model PU816 Material Aluminum alloy Length 35-150 cm (5-stage adjustment) Compatibility DJI Osmo Action 3, DJI Action 2, DJI Osmo Action, GoPro Hero 12 Black / 11 Black Mini / 11 Black / 10 Black / 9 Black / 8 Black / 7 Silver / 7 Black / 7 White / 6 Black / 5 Black / 5 Session / Session / 4 Session / 4 / 3+ / 3 / 3 / 2 /, GoPro HERO / MAX / NEW HERO, Insta360 X4 / Ace Pro / Ace / X3 / ONE RS 1-Inch 360 Edition / ONE RS 1-Inch Edition / ONE RS 4K Edition / ONE RS 360 Edition / ONE X2

This DLC contains 20 pieces of equipment from the Kverneland Group: Machinery from Vicon: • Andex 1304 PRO – Windrower • FastBale – Baler • EXTRA 7100T - Mower • EXTRA 732FT – Mower • BW 2850 - Bale wrapper Machinery from Kverneland: • FastBale – Baler • 53100 MT - Mower • 3332 FT - Mower • 4140 L – Mower • 7850 - Bale wrapper • 2500 i-Plough - Plough • 85112 - Tedder • DF-2 + NG-S 101 F35 - Seeder • e-drill maxi - Seeder • DG II 12000 - Seeder • DF-2 Fronttank - Front tank • iXtra 1100 Comfort - Front tank • Turbo 8000T - Cultivator • Enduro Pro 5000F - Cultivator • Optima RS - Planter • Monopill e-drive II 24 - Planter • Exacta TLX GEOSPREAD - Fertilizer spreader • iXtrack T4 - Sprayer • iXter B18 - Sprayer

Puluz PU739B magnetic neck mount for sports camerasPuluz PU739B is a practical accessory designed for users of sports cameras such as GoPro, DJI OSMO Action, Insta360, SJCAM or AKASO. Thanks to its magnetic design, it allows you to record from a first-person perspective without having to hold the camera in your hand - ideal for walking, vlogging or sightseeing.Record from a first-person perspectiveYou can wear the mount like a lanyard around your neck or attach it to a metal surface, giving you more freedom to create shots from different locations. A strong magnet (N52) holds the camera steady, and the design allows you to easily switch between horizontal and vertical shots, even when the camera is attached to your clothing.Included neck mount magnetic mount screw Manufacturer Puluz Model PU739B Compatibility DJI: Osmo Action 5 Pro, Osmo Action 3, Action 2, Osmo Action; Gopro: HERO (2024), HERO13, HERO12, HERO11 Mini, HERO11, HERO10, HERO9, HERO8, MAX, HERO7, NEW HERO, HERO6, HERO5, HERO5 Session, Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO; Insta360: X4, Ace, Ace Pro, X3, ONE RS 1-Inch 360 Edition, Insta360 ONE RS 4K Edition, Insta360 ONE RS 360 Edition, Insta360 ONE RS 1-INCH EDITION, ONE X2

Insta360 selfie holder cap (for CINSAAVV) Take the perfect selfie with ease. The Insta360 selfie holder overlay is compatible with the CINSAAVV model and makes it easy to use. Its ergonomic shape allows you to use the accessory comfortably for a long time. Forget about the risk of the handle slipping from your hand! Both the installation and removal of the overlay, take place smoothly and without problems. Manufacturer Insta360 Model CINSCAVB Compatibility Insta360 X5, Ace Pro 2, X4, GO 3S, Ace Pro, Ace, GO 3, X3, One TS 1-inch 360 Edition, ONE RS (Twin/4K), GO 2, ONE X2, ONE R, ONE X Length 148 mm Weight 48 g

PULUZ tripod for Insta360 X3 / X4Gain full control over your shots with the PULUZ tripod. This useful and durable accessory is designed for users who appreciate stability, functionality and ease of use. It will also work well for recording Bullet Time shots - just combine it with a selfie stick and a camera that offers such a mode (not included).Durable designThe PULUZ tripod was created from aircraft-grade aluminum alloy, making it not only durable, but also lightweight. In addition, the handle made of high-quality PC and silicone elements increase comfort and guarantee a firm grip. The tripod also has an impressive load capacity of up to 3 kg, which allows safe use of various models of sports and panoramic cameras. It is also distinguished by a built-in magnet and silicone pads that give it more stability.Compact and portableThe tripod's dimensions when folded are just 3 x 17.5 cm, making it extremely compact and easy to carry. When unfolded, it reaches a height of 13 cm, which is ideal for recording on a desk or other stable surfaces. Thanks to its small size, the accessory will easily fit into your bag or backpack - you will successfully use it while traveling.Versatility and stabilityThe PULUZ tripod offers a 360-degree rotating handle with a 1/4-inch thread on top, which allows you to mount various devices and accessories, including cameras, selfie sticks and phone holders. It is also ideal for creating a Bullet Time effect. How it works. Just use the selfie stick, turn on Bullet Time mode on your camera, and then create a one-of-a-kind shot!Wide compatibilityThe tripod is compatible with a wide range of sports and panoramic cameras from well-known manufacturers such as GoPro, DJI and Insta360. This makes it an indispensable accessory for any filming enthusiast. Now you can easily create fantastic video footage! Manufacturer PULUZ Model PU886B Material Aluminum alloy + PC + silicone Load capacity 3 kg Dimensions after folding 3 x 17.5 cm Height when unfolded 13 cm Compatibility DJI Osmo Action 3, DJI Action 2, DJI Osmo Action, GoPro Hero 12 Black / 11 Black Mini / 11 Black / 10 Black / 9 Black / 8 Black / 7 Silver / 7 Black / 7 White / 6 Black / 5 Black / 5 Session / Session / 4 Session / 4 / 3+ / 3 / 2, GoPro HERO / MAX / NEW HERO, Insta360 X4 / Ace Pro / Ace / X3 / ONE RS 1-Inch 360 Edition / ONE RS 1-Inch Edition / ONE RS 4K Edition / ONE RS 360 Edition, ONE X2

Specifikacija: Kameros tvirtinimas Tvirtinimo adapteris Ilgas užspaudimo varžtas Gamintojas PULUZ Modelis PU1056B Medžiaga Aerokosmonautikos klasės aliuminio lydinys Maksimali apkrovos talpa 2 kg Svėrimo 0.13 kg Sukamųjų pakuočių matmenys 10 × 8 × 6 cm Montavimo anga skersmuo 10 mm Reguliavimo diapazonas Sukimas 360°, pakreipimas -90° ~ +30° Montavimo tipas GoPro standartas + ¼-quot; sriegis Suderinamumas: DJI Osmo Nano / Osmo 360 / Osmo Action 5 Pro / Osmo Action 4 / Osmo Action 3 / Action 2. GoPro HERO (2024) / HERO 13 / 12 / 11 / 10 / 9 / 8 Black / MAX / Mini / Silver / Hero 7 ir naujesnės. Insta360 X4 Air / GO Ultra / X5 / Ace Pro / ONE RS 4K Edition / ONE RS 1-Inch Edition / X3 / ONE X2 / ONE RS 360 Edition Kartoninio svorio (100 vnt.) 13 kg Kartoninio matmenys 52 × 33 × 32 cm

PULUZ 360° aluminum handlebar mount for sports cameras (black)The PULUZ 360° handlebar mount is a sturdy and versatile accessory that allows you to attach sports cameras to the handlebars of a motorcycle, bicycle or scooter. The full 360° rotation allows you to easily position the camera at any angle - both vertically and horizontally. This allows you to capture every moment of your ride from the perfect perspective, regardless of the type of activity.Durable aluminum constructionMade of aircraft-grade aluminum alloy, the PULUZ mount features exceptional durability, shock and shatter resistance. The one-piece design ensures maximum stability even during dynamic outdoor shots. The solid mount ensures that the camera stays securely in place - with no backlash or vibration that could affect the quality of your footage.Full compatibility with camerasThe PULUZ Handlebar Mount Adapter is designed to work with the most popular sports cameras, such as GoPro (HERO 7-12, MAX models), DJI Osmo Action (1-5 Pro) and Insta360 (X3, Ace, Ace Pro, X4). Compatible with various mounting systems, the mount will work well with both original cameras and their protective housings or mobile mounts.Stability and easy mountingThanks to an allen screw and a long screw, installation is quick and without additional tools. An allen wrench is included to securely and stably attach the handlebar without damaging the handlebar. The design fits tubes with a diameter of 2 to 3.5 cm, so it can be used on bicycles, motorcycles, scooters and even on poles or rails.Ideal for the activeThe lightweight design, weighing just 78.8 grams, does not weigh down your equipment and does not affect the comfort of your ride. The PULUZ mount allows you to record from both the front and rear of the handlebars, enabling you to get dynamic, professional shots of any trip - from city rides to mountain trails.Included PULUZ 360° aluminum handlebar mount Long mounting screw Allen wrench Manufacturer PULUZ Model 360° Rotation MotorBike Aluminum Mount Handlebar Adapter (Black) Color Black Material Aircraft aluminum alloy Handlebar diameter range 2-3,5 cm Compatibility DJI: Osmo Nano, Osmo 360, Osmo Action 5 Pro, Osmo Action 4, Action 3, Action 2, Osmo Action; GoPro: HERO 7-12 Black, HERO 8/9 Black, MAX, HERO 11 Mini, HERO 2024; Insta360: X4, X3, X2, ONE RS, ONE R, Ace, Ace Pro, Ultra X5 Adjustment 360° horizontal rotation, vertical angle adjustment up to 90° Weight 78,8 g Dimensions 7.8 × 4.8 × 6.3 cm Packaging dimensions 9 × 6 × 4 cm Package weight 0.11 kg

Puluz PU732B folding tripod with selfie stickThe Puluz PU732B is a lightweight and collapsible tripod with monopod function, which is suitable for everyday vlogging as well as traveling or home recording. Thanks to its universal 1/4-inch thread, it is compatible with a wide range of devices - from DSLRs and sports cameras to compact cameras and webcams. Note: phone mount and GoPro adapter are not included.Create shots from different perspectivesThe ball head rotates 360°, allowing you to record from different perspectives - horizontally, vertically, from below or from above. Once you've set the desired angle, simply tighten the knob to lock the head in the desired position. This makes it easy to frame accurately for both static shots and dynamic recordings.Thoughtful designYou can adjust the height of the tripod to suit your needs at any given time. When folded, the product is only 20.5 cm long, making it convenient to pack in a bag or backpack. The built-in cold shoe allows you to easily mount additional lighting or a microphone. The sturdy aluminum, nylon and rubber construction ensures durability, and the non-slip base ensures stability on a variety of surfaces. Manufacturer Puluz Model PU732B Color black Height when folded 20.5 cm Maximum height 55.2 cm Material aluminum alloy, nylon, rubber Compatibility DJI: Osmo Action 5 Pro, Osmo Action 3, Action 2, Osmo Action; Gopro: HERO (2024), HERO13, HERO12, HERO11 Mini, HERO11, HERO10, HERO9, HERO8, MAX, HERO7, NEW HERO, HERO6, HERO5, HERO5 Session, Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO; Insta360: X5, X4, Ace, Ace Pro, X3, ONE RS 1-Inch 360 Edition, Insta360 ONE RS 4K Edition, Insta360 ONE RS 360 Edition, Insta360 ONE RS 1-INCH EDITION, ONE X2