solar inverter

LAN Interface Growatt Shine LAN-X **Features:**The interface is designed to link the Growatt inverter parameters to the Cloud server via LAN and monitor the operation and energy output of the solar plant.The device connects to the solar inverter to remotely detect and potentially troubleshoot PV system failures.A LAN connection is recommended for cabling in a suitable environment. A USB dongle shall be connected to the solar inverter and a network cable shall be connected to the router, then the connection between the inverter and the server will be established automatically.The device has built-in memory, so that the data of the connected inverter is stored for 30-40 days, even if the internet connection is interrupted.Suitable for all Growatt X-series inverters (On grid - with external power supply). **Technical specifications:**Support network: LAN.Ethernet data rate: 10Mbps.Voltage: 5V.Max. power consumption: 3W.Interface: USB Type-A.Supported server: ShineServer (server-cn.growatt.com).Data transmission interval: 5 min.Operating temperature: -30°C ~ +60°C.Safety class: IP65.Dimensions: 152x47x28 mm.Weight: 84g.Certifications:CE, RoHS. **Warranty:** 12 months.

LAN Interface Growatt Shine LAN-X **Features:**The interface is designed to link the Growatt inverter parameters to the Cloud server via LAN and monitor the operation and energy output of the solar plant.The device connects to the solar inverter to remotely detect and potentially troubleshoot PV system failures.A LAN connection is recommended for cabling in a suitable environment. A USB dongle shall be connected to the solar inverter and a network cable shall be connected to the router, then the connection between the inverter and the server will be established automatically.The device has built-in memory, so that the data of the connected inverter is stored for 30-40 days, even if the internet connection is interrupted.Suitable for all Growatt X-series inverters (On grid - with external power supply). **Technical specifications:**Support network: LAN.Ethernet data rate: 10Mbps.Voltage: 5V.Max. power consumption: 3W.Interface: USB Type-A.Supported server: ShineServer (server-cn.growatt.com).Data transmission interval: 5 min.Operating temperature: -30°C ~ +60°C.Safety class: IP65.Dimensions: 152x47x28 mm.Weight: 84g.Certifications:CE, RoHS. **Warranty:** 12 months.

Enclosed (IP65) rotary AC isolator switch, up to 63 A, 4-pole, 230V-440V AC  Features: AC switch rated 63A, 230V-440V for outdoor AC applications, with handle, with lock, for safe use and maintenance.The AC isolator can be installed at solar inverter AC side and match any AC applications in the voltage range 230-440V.Weatherproof, robust, reliable, suitable for any external application. The base-mounted mechanism provides for easier wiring and more wiring room.Lockable handler.Complete with a set of mounting screws.  Technical specifications: Number of poles: 4.Rated voltage (Ue): AC 230-440V.Rated current (In): 32A.Insulation voltage (Ui): 1000V.Rated impulse withstand voltage (Uimp): 2.5kV.Mechanical service life: 10000 cycles.Electrical service life: 1500 cycles.Protection class: IP65.Suitable cable cross-section: 4.0 - 16.0 mm².Color: white.Dimensions: 171.4 x 108.4 x 108.9 mm.Switch rating: AC-21A.Conform to: IEC 60947-3, EESS approved.  Warranty: 24 months.

Wi-Fi Interface Growatt Shine WiFi-F **Features:**The interface is designed to link the Growatt inverter parameters to the Cloud server via Wi-Fi and monitor the operation of the solar power plant and produced energy.The device is installed on the solar inverter to remotely detect and potentially troubleshoot PV system failures.USB stick with 50m coverage and built-in memory connects your PV system to Wi-Fi.The data of the connected inverter is saved for 30 days, in the event of an internet failure.Suitable for all Off-grid Growatt inverters. **Technical specifications:**Support network: Wi-Fi 2.4GHz.Max. communication range: 100m.Wi-Fi wireless standard: IEE802.11 b/g/n.Transmit power: 802.11b: +20dBm(max); 802.11g: +18dBm(max); 802.11n: +15dBm(max).Receiver sensitivity: 802.11b: -89dBm(max); 802.11g: -81dBm(max); 802.11n: -71dBm(max).Operating poltage: 5V.Operating current: 1A.Interface: USB Type-A.Data Interface: UART 9600bps; Ethernet 100Mbps.Network Type: Access Point; Station Mode with Soft AP.Security: WEP / WPA-PSK / WPA2-PSK / WAPI.Encryption: WEP64 / WEP128 / TKIP / AES.Supported server: ShineServer (server-cn.growatt.com).Data transmission interval: 5 min.Operating temperature: -20°C ~ +65°C.Dimensions: 135x79x29 mm.Weight: 63g. **Warranty:** 12 months.

Wi-Fi Interface Growatt Shine WiFi-F **Features:**The interface is designed to link the Growatt inverter parameters to the Cloud server via Wi-Fi and monitor the operation of the solar power plant and produced energy.The device is installed on the solar inverter to remotely detect and potentially troubleshoot PV system failures.USB stick with 50m coverage and built-in memory connects your PV system to Wi-Fi.The data of the connected inverter is saved for 30 days, in the event of an internet failure.Suitable for all Off-grid Growatt inverters. **Technical specifications:**Support network: Wi-Fi 2.4GHz.Max. communication range: 100m.Wi-Fi wireless standard: IEE802.11 b/g/n.Transmit power: 802.11b: +20dBm(max); 802.11g: +18dBm(max); 802.11n: +15dBm(max).Receiver sensitivity: 802.11b: -89dBm(max); 802.11g: -81dBm(max); 802.11n: -71dBm(max).Operating poltage: 5V.Operating current: 1A.Interface: USB Type-A.Data Interface: UART 9600bps; Ethernet 100Mbps.Network Type: Access Point; Station Mode with Soft AP.Security: WEP / WPA-PSK / WPA2-PSK / WAPI.Encryption: WEP64 / WEP128 / TKIP / AES.Supported server: ShineServer (server-cn.growatt.com).Data transmission interval: 5 min.Operating temperature: -20°C ~ +65°C.Dimensions: 135x79x29 mm.Weight: 63g. **Warranty:** 12 months.

Cellular Interface GROWATT Shine 4G-X **Features:** The interface is designed to link the Growatt inverter parameters to the Cloud server via 4G cellular network and monitor the operation of the solar power plant and produced energy. The device is installed on the solar inverter to remotely detect and potentially troubleshoot PV system failures. USB stick with built-in memory connects your PV system to 4G network. The data of the connected inverter is saved for 30 days, in the event of an network failure. Suitable for all On-grid Growatt X-series inverters. **Technical specifications:** Supported network: 4G/3G/2G. System and frequency band: GSM: 900/1800MHz. WCDMA: B1/B5/B8. LTE FDD: B1/B3/B5/B7/B8//B20. LTE TDD: B38/B40/B41. Inverter communication: USB - Modbus RTU protocol. Server communication: Modbus TCP protocol. SIM slot: standard SIM card (purchased separately). Operating voltage: 5V. Max. rated power: 1.2W. Interface: USB Type-A. Supported server: ShineServer (server.growatt.com). Data transmission interval: 5 min. Operating temperature: -30°C ~ +65°C. Dimensions: 122x47x32 mm. Weight: 60g. **Warranty:** 12 months.

Cellular Interface GROWATT Shine 4G-X **Features:** The interface is designed to link the Growatt inverter parameters to the Cloud server via 4G cellular network and monitor the operation of the solar power plant and produced energy. The device is installed on the solar inverter to remotely detect and potentially troubleshoot PV system failures. USB stick with built-in memory connects your PV system to 4G network. The data of the connected inverter is saved for 30 days, in the event of an network failure. Suitable for all On-grid Growatt X-series inverters. **Technical specifications:** Supported network: 4G/3G/2G. System and frequency band: GSM: 900/1800MHz. WCDMA: B1/B5/B8. LTE FDD: B1/B3/B5/B7/B8//B20. LTE TDD: B38/B40/B41. Inverter communication: USB - Modbus RTU protocol. Server communication: Modbus TCP protocol. SIM slot: standard SIM card (purchased separately). Operating voltage: 5V. Max. rated power: 1.2W. Interface: USB Type-A. Supported server: ShineServer (server.growatt.com). Data transmission interval: 5 min. Operating temperature: -30°C ~ +65°C. Dimensions: 122x47x32 mm. Weight: 60g. **Warranty:** 12 months.

Sungrow LAN / WiFi Internet interface WiNet-S, RJ-45 **Features:** Sungrow LAN/WiFi Internet communication module WiNet-S Dongle is designed to link Sungrow inverter parameters with iSolarCloud server via WLAN or LAN and monitor the operation and energy output of the solar plant. A LAN connection is recommended for cabling in a suitable environment. The RJ-45 plug shall be connected to the solar inverter and a network cable shall be connected to the router, then the connection between the inverter and the server will be established automatically. Supports Smart IV Curve Diagnosis, local and remote parameter setting, firmware updates. The device features multifunctional control button and 3 LED indicators. Suitable for Sungrow SG-RS / SG-RT / SH-RS / SH-RT / SG-CX series inverters. **Technical specifications:** Supported inverters: SG2.0RS / SG3.0RS / SG3.6RS / SG4.0RS / SG5.0RS / SG5.0RS / SG3.0RT / SG4.0RT / SG5.0RT / SG6.0RT / SG7.0RT / SG8.0RT / SG10RT / SG12RT / SG15RT / SG17RT / SG20RT / SH3.0RS / SH3.6RS / SH4.0RS / SH5.0RS / SH6.0RS /SG33CX / SG40CX / SG50CX / SG110CX. Supported network: LAN/ WLAN. Data transfer rate: 10/100Mbps. Wi-Fi standard: IEEE802.11 b/g/n. Max. communication range: 100 m. Wi-Fi transmission power: IEEE802.11b

CCA is the data logger for your PV system devices (module optimizer, inverter, battery, building meters etc.) which enables valuable insight into module level performance data. As the communication hub of Tigo smart platform, it connects up to 900 TS4 units, acts as a data logger and rapid shutdown controller. It powers the monitoring and safety capabilities of smart solar modules.Set includes: CCA, TAP and power supply. Note: Required components for CCA: Tigo Access Point (TAP) and Tigo TS4 devices (TS4-A-O, TS4-A-S or TS4-A-M). Features: Includes the benefits of safety and monitoring.Meets NEC rapid shutdown requirements.Supports wireless and wired networks. Connects via an RS485 cable to the TAP, which communicates wirelessly with the TS4. Enables internet connection via Ethernet or Wi-Fi. Configure and commission with Tigo SMART app.Enables module level monitoring with the Tigo Energy intelligence platform when paired with the TAP.Monitor 3rd party devices via Modbus (AC meters, charge controllers, weather stations, wind or light sensors, etc.).Provides immediate access to system data for installers.Collect data from up to 900 TS4 units and 7 TAP devices.  Specifications: Input voltage range: 10V-25V DC.Power supply voltage: 100V-240V AC.Consumption: 3W-7W.Application: Tigo SMART, Android, iOS.Connection: wireless with TS4 units, RS485 cable with TAP.Max TS4 units supported: 900.Max TAP units supported: 7.Rapid shutdown standards: NEC 2014, 2017 / NEC 690.12.LED indicators: yes.Installation: DIN rail mountable enclosure.Cooling: natural convection.Working temperature: -20°C ~ +70°C.Enclosure safety class: IP68, NEMA 4R.Weight CCA only: 126g.Dimensions: 31x115.51x71.54 mm.  Warranty: 24 months.