W reference

65W DJI Mavic 3 mains chargerThe DJI mains charger is distinguished by its power of up to 65W and is equipped with 3 ports (2x USB-C, 1x USB-A), allowing you to charge your drone's battery and remote controller at the same time. You can also use it to charge other devices, such as a smartphone or laptop. What's more, GaN technology has made it possible to significantly increase the performance of the product, while reducing its size - storing or transporting it won't be a problem for you. The charger also supports such fast charging standards as PPS and PD. You don't have to wait too long until your equipment is ready to work again! Brand DJI Name DJI 65W Portable Charger Input voltage 100-240 V, 2 A, 50/60 Hz USB-C output 5 V, 5 A;9 V, 5 A;12 V, 5 A;15 V, 4.3 A;20 V, 3.25 A;5-20 V, 3.25 A; USB-A output 5 V, 2 A Rated power 65 W Operating temperature 5°C to 40°C Charging time* DJI Mavic 3 intelligent battery: approx. 1 h 36 min;DJI RC-N1: approx. 2 h 40 min;DJI RC: approx. 2 h;DJI RC Pro: approx. 2 h;DJI Avata intelligent battery: approx. 47 min;DJI Goggles 2 battery: approx. 1 h 50 min;*If two ports are used simultaneously, it will take longer for devices to charge. Tested in a laboratory environment. The information provided here is for reference only. Compatibility DJI Mavic 3 Pro, DJI Mavic 3 Pro Cine, DJI Mavic 3 Classic, DJI Mavic 3, DJI Mavic 3 Cine, DJI Avata, DJI Goggles 2 battery pack , Ładowarka sieciowa 65W DJI Mavic 3Ładowarka sieciowa DJI wyróżnia się mocą sięgającą 65 W i została wyposażona w 3 porty (2x USB-C, 1x USB-A), dzięki czemu umożliwia jednoczesne ładowanie akumulatora drona i aparatury sterującej. Za jej pomocą naładujesz też inne urządzenia, na przykład smartfona lub laptopa. Co więcej, technologia GaN pozwoliła znacznie zwiększyć wydajność produktu, a jednocześnie zmniejszyć jego rozmiary – jego przechowywanie czy transport nie sprawi Ci problemu. Ładowarka obsługuje również takie standardy szybkiego ładowania jak PPS i PD. Nie musisz zbyt długo czekać, aż Twój sprzęt będzie znów gotowy do działania! Producent DJI Nazwa DJI 65W Portable Charger Napięcie wejściowe 100-240 V, 2 A, 50/60 Hz Wyjście USB-C 5 V, 5 A;9 V, 5 A;12 V, 5 A;15 V, 4,3 A;20 V, 3,25 A;5-20 V, 3,25 A; Wyjście USB-A 5 V, 2 A Moc znamionowa 65 W Temperatura pracy Od 5°C do 40°C Czas ładowania* Inteligentny akumulator DJI Mavic 3: ok. 1 h 36 min;DJI RC-N1: ok. 2 h 40 min;DJI RC: ok. 2 h;DJI RC Pro: ok. 2 h;Inteligentny akumulator DJI Avata: ok. 47 min;Akumulator DJI Goggles 2: ok. 1 h 50 min;*Jeśli dwa porty będą używane jednocześnie, ładowanie urządzeń będzie trwało dłużej. Przetestowano w środowisku laboratoryjnym. Podane tu informacje stanowią wyłącznie punkt odniesienia. Kompatybilność DJI Mavic 3 Pro, DJI Mavic 3 Pro Cine, DJI Mavic 3 Classic, DJI Mavic 3, DJI Mavic 3 Cine, DJI Avata, akumulator DJI Goggles 2

Fanttik A10 Pro 2-in-1 Laser Distance MeterThe Fanttik A10 Pro is a compact tool that combines a classic tape measure with a precise laser rangefinder. This allows you to measure both short distances with high accuracy and larger spaces without unrolling the tape. It is a convenient solution for home, workshop, and professional use—without the need to carry two separate tools.Two measurement methods in one deviceThe A10 Pro combines a 3-meter tape measure with a laser rangefinder with a range of up to 50 meters. In practice, this means that you can quickly switch between traditional and laser measurement, depending on the situation. The tape measure is ideal for details and short distances, while the laser allows you to conveniently measure larger rooms or facades without the help of a second person. Intelligent mode switching makes it easy to work both indoors and outdoors.Clear IPS screen – convenient work in all conditionsThe meter is equipped with a 3.75 cm color IPS screen with adjustable brightness up to 500 nits and a resolution of 172 × 320. This ensures that readings remain clear even in direct sunlight. Importantly, the screen simultaneously displays the results from the tape measure and laser rangefinder, which speeds up work and reduces the need to switch views. This saves time during intensive measurements.Various units, modes, and reference pointsThe device supports 6 units of measurement: ft, ft+in, in, m, cm, and mm, making it easy to adapt to the type of project. There are 3 operating modes available – distance, area, and volume measurement – so you can perform more calculations with a single device without additional tools. Three reference points (front, rear, mounting hole) increase flexibility in hard-to-reach places such as corners or ceilings.Measurement memory and USB-C chargingThe Fanttik A10 Pro stores up to 30 measurement results, allowing you to quickly return to previous data without having to measure again. The built-in battery, charged via a USB-C port, provides over 5,000 uses on a single charge, making the device ideal for long working days without the need for frequent power connections.Stability and operation in hard-to-reach placesThe housing is designed for mounting on a tripod, which increases stability when measuring at height or in larger spaces. Stable positioning of the device translates into more accurate measurements and greater comfort when working in more demanding conditions. The Fanttik A10 Pro is a practical 2-in-1 tool for those who expect precision, convenience, and versatility in one compact device. Manufacturer Fanttik Model A10 Pro Laser measurement range up to 50 m Tape length 3 m Laser measurement accuracy ±0.32 cm Tape measurement accuracy ±0.16 cm Display 1.47" color IPS Screen resolution 172 × 320 px Screen brightness up to 500 nits (adjustable) Supported units ft, ft+in, in, m, cm, mm Reference points front, rear, mounting hole Measurement memory 30 records Power supply built-in rechargeable battery Charging USB-C

UNI FAN SL Wireless The UNI FAN SL Wireless series has made another revolutionary breakthrough in making cable management easier and unifying controllers across different devices. The UNI FAN SL Wireless utilizes a 2.4 GHz wireless signal to control its lighting effects and fan speed to further improve your PC building experience. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only. WIRELESS CONTROL, EASY INSTALLATION The revolutionary 2.4GHz L-wireless controller greatly simplifies the installation experience of UNI FAN SL Wireless Series. L-WIRELESS CONTROLLER Included in these models:12SLLCD1W3B, 12SLLCD1W3W, 12RSLLCD1W3B, 12RSLLCD1W3W, 12SL1W3B, 12SL1W3W, 12RSL1W3B, 12RSL1W3W, PW24-1W-T, RF-T-B, RF-T-W Based on user experience and continuous research, we newly designed a L-Wireless controller. The L-Wireless controller connects to the motherboard, and transmits a 2.4GHz signal to the fan, enabling the wireless control of the LED lighting effects and fan speed for the UNI FAN SL Wireless Series. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only. Connect to USB Type A port   Connect to 9-pin port on motherboard Note: To synchronize the fan speed with the motherboard, please use the second connection method and ensure that the PWM cable from the controller is connected to the motherboard for proper functionality. Switch to PWM fan and full speed mode in the Bios. Power each group of fans by connecting the PWM cable on the receiver to the motherboard (the LCD version also requires a separate USB connection for signal transmission). The cable length can be shorten by winding it around the organizer on the receiver. Note: The LED and LCD version use a different receiver, for the mix cluster, please use the LCD version receiver. Note: If the motherboard 4-pin PWM ports' power is insufficient (below 1A) and the fan shows a flickering white light upon startup, this indicates unstable power from the motherboard. In this case, please connect the cable to a different 4-pin PWM port on the motherboard or use the included 12V to SATA adapter from the triple-pack. Adopting a wireless solution minimizes the number of cables, and simplifies cable management while avoiding occupying the few available USB 2.0 ports on the motherboard. This allows users to connect more devices without restriction. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only.   The transmission logic between the USB port and the LCD has been optimized, enabling the use of an additional USB splitter cable to the USB 2.0 or 3.0 port on the motherboard: - USB splitter cable without SATA for additional power (e.g., LIAN LI USB 2.0 1-to-3 HUB): Supports up to 6 SL LCD wireless fans.- USB splitter cable with SATA for additional power (e.g., LIAN LI Edge PSU hub): Supports up to 9 SL LCD wireless fans. Furthermore, a single motherboard can support up to 20 UNI FAN SL LCD wireless fans. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only. SIMULTANEOUS CONTROL This powerful controller supports the transmission of 10 channels simultaneously. Note: The controller supports the Strimer Wireless Series as well. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only.   Each group of fans occupies one channel, ensuring stable control for multiple groups of fans, all within the installation limits of your standard PC. Plus, it's fully compatible with the latest Strimer Wireless, allowing you to use the extra channels for other devices. In the future, the L-Wireless Controller will also be compatible with all LIAN LI wireless devices. With this controller, you can create a stunning and streamlined LIAN LI ecosystem that combines beauty and simplicity! Note: This listing is for the LED model, not the LCD Model. Images shown below are for

Fanttik A10 Pro 3-in-1 laser distance meterThe Fanttik A10 Pro is a compact 3-in-1 measuring tool that combines a digital tape measure, laser rangefinder, and green cross-line laser. This allows you to perform both quick measurements at short distances and precise measurements in larger spaces or when leveling. It is a practical solution for renovations, finishing works, DIY, and gardening.3-in-1 – greater functionality, less equipmentThe device offers a digital tape measure with a length of approx. 3 m, which provides millimeter accuracy and is suitable for short measurements. The built-in laser rangefinder allows measurements up to 50 m, making it easy to measure larger rooms without unrolling the tape. In addition, the green cross-line laser with a range of 10 m facilitates leveling and precise positioning of elements, for example when hanging pictures or installing shelves. As a result, one device replaces several tools and significantly speeds up work.Clear IPS HD screen in all conditionsThe Fanttik A10 Pro is equipped with a 3.73 cm color IPS screen with adjustable brightness up to 500 nits and a resolution of 172×320. This makes the results easy to read even in bright daylight. Importantly, the display shows both tape and laser measurements simultaneously, eliminating the need to switch views and streamlining work in the field and on the construction site.Various units, modes, and reference pointsThe Fanttik A10 Pro supports 6 units of measurement: Ft, Ft+in, in, m, cm, and mm, so you can easily adjust the settings to your needs. There are 3 operating modes available: distance, area, and volume measurement, which facilitates material and cost planning. The choice of 3 reference points – front, rear, and mounting hole – allows you to measure precisely in corners, near ceilings, or in hard-to-reach places. The 1/4" thread allows mounting on a tripod, which increases stability and accuracy for longer measurements.Measurement memory and USB-C chargingThe device stores up to 30 recent measurements, allowing you to quickly return to previous results without having to remeasure. The built-in battery, charged via a USB-C port, provides over 5,000 uses on a single charge, so you don't have to worry about replacing batteries during work. The Fanttik A10 Pro is a practical, multifunctional tool for people who value accuracy, convenience, and time savings in their daily measurements. Manufacturer Fanttik Model A10 Apex Digital tape measure up to 2.99 m Laser rangefinder up to 50.29 m Green cross laser up to 9.75 m Laser accuracy: ±3.2 mm Digital tape accuracy ±1.6 mm Electronic protractor accuracy (2 axes) ±1° Display type color IPS HD Display diagonal 3.73 cm Display resolution 172 × 320 px Brightness up to 500 nits Measurement units m / cm / mm / ft / ft+in / in Charging port USB-C

FNIRSI DPOS350P 4-in-1 Digital OscilloscopeThe FNIRSI DPOS350P is a versatile digital oscilloscope designed for convenient and intuitive operation. It features a large 7-inch touch screen for clear signal viewing and quick access to key functions. It combines the features of an oscilloscope, signal generator, spectrum analyzer, and frequency response analyzer, making it suitable for a wide range of measurement applications. High bandwidth, fast sampling, and large memory enable precise signal analysis, while advanced visualization modes improve measurement readability.Full control over the signalThe large 7-inch touch screen provides a full view of the analyzed signal and precise parameter control. The clear interface allows you to quickly understand the behavior of the system, and the high image quality makes the DPOS350P an "engineer's second pair of eyes" – indispensable for diagnostics and testing.Maximum functionalityThe FNIRSI DPOS350P is an advanced 4-in-1 oscilloscope that offers the functions of four different devices. It is an oscilloscope (2 channels, 350 MHz bandwidth, 1 GSa/s sampling, 8-bit resolution, 50,000 waveforms per second), signal generator (up to 50 MHz), spectrum analyzer (200 kHz – 350 MHz range), and frequency response analyzer (100 kHz – 50 MHz). Such a wide range of functions means that one device replaces several specialized tools, saving space and time.High measurement performanceThe DPOS350P model offers a bandwidth of 350 MHz, a sampling rate of 1 GSa/s, and a memory depth of 60 kpts, which translates into accurate signal reproduction and stable measurements even with complex waveforms. What's more, the FNIRSI DPOS350P allows Bodé chart analysis in the 100 Hz – 50 MHz range, with adjustable frequency, excitation amplitude, and offset. It is the ideal tool for testing amplifiers, filters, and power loops, allowing you to quickly and accurately assess the frequency response of a circuit.Advanced spectrum and EMI analysisThe device covers a frequency range from 200 kHz to 350 MHz and allows for precise manual adjustment of key parameters (start/stop frequencies, bandwidth, reference level, attenuation, and FFT length). Cursor measurement functions and advanced visualization modes are at your disposal, including an impressive and extremely clear 3D Waterfall view. This makes the oscilloscope ideal for EMI testing, RF signal analysis, and harmonic detection.Signal visibility like never beforeDigital fluorescence technology provides exceptional signal clarity and precise color reproduction. In addition, advanced noise filtering improves waveform detection and presentation, enabling more accurate signal analysis. Support for 8-16-bit technology takes image clarity to the next level.Tablet design that makes work easierThe slim housing in an elegant black finish with blue accents combines modern design with ergonomics. The tablet form factor allows for comfortable one-handed operation, and the touch interface makes all functions immediately accessible—without unnecessary menus and complicated navigation. This is a device that naturally adapts to the user's work rhythm. The oscilloscope supports multiple languages, including English, Chinese, Russian, and Portuguese, making it ideal for international environments.Included 350 MHz probe x2 QC18W charger USB cable Alligator clip leads User manual General Manufacturer Fnirsi Model DPOS350P Startup configuration 5 presets Languages Chinese / English / Russian / Portuguese Screen diagonal 7 inches Screen resolution 1024 × 600 pixels Screen technology IPS, full viewing angle Interaction mode Capacitive touch screen Expansion interface Capacitive touch screen Auto power off 15 minutes ~ 1 hour / off Update Supports .iso image updates Charging requirements QC18W – 12 V / 1.5 A Battery 3.7 V lithium, 8000 mAh Operating time approx. 3 hours Charging time approx. 5 hours Total power consumption 10 W Cooling passive (air) Device dimensions 190 × 128 × 37 mm Frequency