Wireless display adapter

Dell Pro 5 Mouse – MS526-BLK-EMEA Dell Pro 5 Mouse MS526 is a wireless mouse designed for everyday work at home and in the office. Its straightforward design, two primary buttons and scroll wheel provide an easy-to-use solution for general computer and office tasks. The mouse connects to a computer using the Dell Secure Link USB receiver. The factory-paired 2.4 GHz connection enables quick setup and provides a stable wireless connection with an operating range of up to 10 metres. Dell Display and Peripheral Manager allows you to adjust the mouse DPI setting and primary button, check the battery status and update the firmware. A dedicated storage compartment inside the mouse makes the USB receiver easier to carry. Key features Wireless mouse for everyday work 2.4 GHz wireless connection Dell Secure Link USB receiver Operating range of up to 10 m Adjustable DPI setting Battery-status indicator Receiver storage compartment inside the mouse Dell Display and Peripheral Manager support AA battery included Technical specifications Product type: Wireless mouse Model: Dell MS526 Regulatory model: MS326t / MS326c Connectivity: 2.4 GHz with Dell Secure Link USB receiver RF protocol: 2.4 GHz Operating range: Up to 10 m Buttons: Left and right buttons Scrolling: Scroll wheel Indicator: Battery status Power switch: Yes Power source: 1 × AA alkaline battery Operating voltage: 0.9–1.6 V Colour: Black Product code: MS526-BLK-EMEA Software Dell Display and Peripheral Manager Adjust the mouse DPI setting Select the primary mouse button Customise button functions and application-specific shortcuts View the battery status and firmware version Update the firmware Pair or unpair the mouse with the USB receiver Supported operating systems Windows 10 Windows 11 macOS 11 or later Linux Ubuntu ChromeOS iPadOS 14 or later Android 9.0 or later Dimensions and weight Length: 115.0 mm Width: 61.7 mm Height: 39.4 mm Weight with battery: 81.15 g Weight without battery: 58.15 g Operating conditions Operating temperature: 0–40°C Storage temperature: –40–65°C Storage relative humidity: Up to 95%, non-condensing Connectivity note Using the mouse requires an available USB-A port for the Dell Secure Link receiver. If the device only has USB-C ports, a separately sold USB-C to USB-A adapter is required. Package contents Dell Pro 5 Mouse MS526 Dell Secure Link USB receiver 1 × AA battery Documentation Warranty 3-year limited hardware warranty When purchased with a Dell computer, the product follows the computer warranty

Plug & Play - no configuration or app installation required Compatible with Android, iOS, Windows, macOS Wireless transmission 2.4 GHz - range up to 30 meters AI-based noise reduction, echo effect, mute (silent) mode Charging case with 400 mAh battery and LED display Microphone with 80 mAh battery - up to 6 hours of operation USB-C adapter to Lightning (iPhone) and USB-A (computer) included

WIRELESS CAR COMPRESSOR WITH DISPLAY. Mark. Sthor. Symbol. 82120. Series. GRF. Set contents. compressor, hose, inflation adapter, universal tips for inflating balls, mattresses, etc. x2,. Voltage. 5V d.c.. Efficiency. 25 l/min. Hose length. 40 cm. Display type. LED. Battery capacity. 2000 mAh. Max pressure. 0.69/6.9/100 MPa/bar/PSI. Max current. 1A. Workplace lighting. Yes. Battery voltage. 7.4 V d.c.. Battery type. Li-Ion. Charging time. 4-6 hours. Charger. USB. Battery charge indicator. Yes...

When the alarm goes off in the morning, we usually get out of bed with heavy sighs. Therefore, it is worth organizing a wake-up call that will give us a positive response to the whole day. CR55CHARGE alarm clock radio will be very useful. The double alarm function (the possibility of setting two wake-up times) and the snooze function (from 5 to 60 minutes) will be appreciated even by the most difficult escapees. You can also decide what type of alarm you want to wake up to. You can choose between a classic speaker or your favorite radio station. And this is the second method that will allow you to greet the day with a smile! The CR55CHARGE is also equipped with a radio that allows you to program 20 stations into its memory. With this feature, you don't have to search through all the frequencies every time you turn on the radio to find your favorite. The alarm clock can also charge mobile devices. Also, there are two ways to go with this model. The first is classic wired charging. On the back of the device is a USB port where you connect the charging cable of your smartphone or tablet. The second method is wireless charging. Simply insert the portable device with the rear side centered into the alarm clock radio station marked with a charging point. An illuminated wireless charging indicator on the screen indicates that the mobile device is charging. Please note that the wireless charging feature only works with Qi-enabled devices. The current time is displayed on a large blue LED display. The numbers are clear and legible both day and night. The alarm clock also has an LED bottom light, giving it a very modern look at night. The backlight function allows you to adjust the intensity of the screen so that it does not scare the eyes and remains readable when the room is dark. Sleep mode allows you to set the time after which the device turns off. This is especially useful when listening to the radio when falling asleep. An additional memory backup ensures that you don't lose your alarm settings in the event of a power failure. For this purpose, the device must have an additional CR2032 battery. With the CR55CHARGE alarm clock, you forget about the need for multiple chargers for your mobile devices, and you'll be in a good mood every morning! Technical data: PLL FM tuner with 20 preset station memory Clock with double alarm and snowflake Wireless charging USB charging port Large LED screen Bottom mood light Adjustable regulator Alarm with radio or buzzer Power adapter: DC 5V 2A Backup time: CR2032 (battery not included) Dimensions: 165 x 80 x 93 mm Weight: 0.293 kg

When the alarm clock rings in the morning, we usually get out of bed with a heavy sigh. So it’s worth organising a wake-up call which will positively tune us into action for the whole day to come. The CR55CHARGE alarm-clock radio will be a great help for this. The double alarm function (the facility of setting two wake-up times) and the snooze function (from 5 to 60 minutes) will be appreciated even by the heaviest sleepers. What’s more, you can decide about the type of alarm you want to be woken up by. You can choose between a classic buzzer or your favourite radio station. And it is this second way which will make you welcome the day with a smile! The CR55CHARGE is also equipped with a radio tuner, which allows you to program 20 stations in its memory. With this feature, you don't have to search all the frequencies every time you turn on the radio to find your favourite. The alarm-clock radio is also capable of charging mobile devices. Moreover, with this model it is possible in two ways. The first is classic wire-based charging. There is a USB port at the back of the device, to which you connect the charging cable for your smartphone or tablet. The second way is wireless charging. Simply place a portable device with its rear side centrally on the top panel of the alarm-clock radio marked with a charging point. An illuminated wireless-charging indicator on the display indicates that the mobile device is charging. Please note that the wireless charging function works only with Qi-capable devices. The current time is shown on a large blue LED display. The digits are clear and legible both day and night. The alarm clock also features a bottom LED backlight, which makes it look very modern at night. The dimming function allows the adjusting of the intensity of the display, so that it does not dazzle the eyes, and remains readable when the room is dark. The sleep mode allows you to set the time after which the device switches off. This is especially useful when listening to the radio while falling asleep. Its optional memory backup ensures that you don’t lose the alarm-clock settings in the event of a power failure. For this purpose, the device must be equipped with an additional CR2032 battery. With the CR55CHARGE alarm clock you will forget about needing several chargers for your mobile devices, and you will be in a good mood every morning! Technical data: PLL FM tuner with 20 preset station memory Clock with dual alarm and snooze Wireless charging USB charging port Large LED display Lower mood light Adjustable dimmer Alarm with radio or buzzer Power adapter: DC 5V 2A Back up time: CR2032 (battery not incl.) Dimensions: 165 x 80 x 93 mm Weight: 0,293 kg

With the Pixel Timer Remote Control Wireless TW-283/E3 you can trigger your Canon camera wirelessly, up to a distance of more than 80 meters. So you no longer have to touch the shutter release button of your camera or even be near your camera! This multifunctional set supports five different modes. It allows you to remotely control your camera for a single photo (single shooting) or take a series of photos within 1 second (continuous shooting). In addition, the TW-283/E3 offers the BULB-shooting option, in which you determine the shutter speed. If your camera supports long shutter speed photography, you have the option to hold down the button on the remote control so that the shutter opens. When you release the button, the shutter will close again. You can also set a timer. In this mode (Delay shooting) you can set the timer between 1 and 59 seconds, where you can also determine the number of photos (1 to 59 photos). Finally, you can set up a Timer schedule shooting, up to a maximum of 99 hours, 59 minutes and 59 seconds. You can also freely set the number of photos to be taken between 1-99, 1-999 or infinity. The set consists of the transmitter TW-283TX and receiver TW-283RX. The transmitter has a comfortable grip and has an LCD screen. It displays the channel, battery status and selected mode. The transmitter sends a signal with a 2.4 gHz frequency, on up to 30 different channels. The maximum standby time is 1,000 hours for the transmitter and 400 hours for the receiver. Both the transmitter and receiver operate on two AAA batteries (not included). The receiver has a hotshoe adapter with 1/4" female thread. This allows you to mount it not only on your Canon camera, but also on a tripod (see optional accessories). The weight of the transmitter is 52.6 grams and of the receiver 36.2 grams. This product is suitable for the following cameras: html, body { height: 100%; } img.camerakabel { height: 70%; width: 70%; } If you have another camera, please contact us for a suitable product. Usage Pixel TW-283/E3 for Canon To use the remote control, insert the AAA batteries into the transmitter and receiver compartments. To use the remote control wirelessly, turn on the receiver. Then place the receiver on the hotshoe of your camera, or optionally on a tripod. You can also use the transmitter without the receiver, by attaching the transmitter to your camera using the supplied cable. In the clear menu of the transmitter you can easily determine the mode you want to use. The transmitter has an auto-shutdown function after 30 minutes; the receiver does not switch off automatically.

With the Pixel Timer Remote Control Wireless TW-283/N3 you can trigger your Canon camera wirelessly, up to a distance of more than 80 meters. So you no longer have to touch the shutter release button of your camera or even be near your camera! This multifunctional set supports five different modes. For example, you can remotely control your camera for a single photo (single shooting) or take a series of photos within 1 second (continuous shooting). In addition, the TW-283/N3 offers the BULB-shooting option, in which you determine the shutter speed. If your camera supports long shutter speed photography, you have the option to hold down the button on the remote control so that the shutter opens. When you release the button, the shutter will close again. You can also set a timer. In this mode (Delay shooting) you can set the timer between 1 and 59 seconds, where you can also determine the number of photos (1 to 59 photos). Finally, you can set up a Timer schedule shooting, up to a maximum of 99 hours, 59 minutes and 59 seconds. You can also freely set the number of photos to be taken between 1-99, 1-999 or infinity. The set consists of the transmitter TW-283TX and receiver TW-283RX. The transmitter has a comfortable grip and has an LCD screen. It displays the channel, battery status and selected mode. The transmitter sends a signal with a 2.4 gHz frequency, on up to 30 different channels. The maximum standby time is 1,000 hours for the transmitter and 400 hours for the receiver. Both the transmitter and receiver operate on two AAA batteries (not included). The receiver has a hotshoe adapter with 1/4" female thread. This allows you to mount it not only on your Canon camera, but also on a tripod (see optional accessories). The weight of the transmitter is 52.6 grams and of the receiver 36.2 grams. This product is suitable for the following cameras: html, body { height: 100%; } img.camerakabel { height: 40%; width: 40%; } If you have another camera, please contact us for a suitable product. Usage Pixel TW-283/N3 for Canon To use the remote control, insert the AAA batteries into the transmitter and receiver compartments. To use the remote control wirelessly, turn on the receiver. Then place the receiver on the hotshoe of your camera, or optionally on a tripod. You can also use the transmitter without the receiver, by attaching the transmitter to your camera using the supplied cable. In the clear menu of the transmitter you can easily determine the mode you want to use. The transmitter has an auto-shutdown function after 30 minutes; the receiver does not switch off automatically.

With the Pixel Timer Remote Control Wireless TW-283/S1 for Sony you can trigger your Sony camera wirelessly, up to a distance of more than 80 meters. So you no longer have to touch the shutter release button of your camera or even be near your camera! This multifunctional set supports five different modes. For example, you can remotely control your camera for a single photo (single shooting) or take a series of photos within 1 second (continuous shooting). In addition, the TW-283/S2 offers the BULB-shooting option, in which you determine the shutter speed. If your camera supports long shutter speed photography, you have the option to hold down the button on the remote control so that the shutter opens. When you release the button, the shutter will close again. You can also set a timer. In this mode (Delay shooting) you can set the timer between 1 and 59 seconds, where you can also determine the number of photos (1 to 59 photos). Finally, you can set up a Timer schedule shooting, up to a maximum of 99 hours, 59 minutes and 59 seconds. You can also freely set the number of photos to be taken between 1-99, 1-999 or infinity. The set consists of the transmitter TW-283TX and receiver TW-283RX. The transmitter has a comfortable grip and has an LCD screen. It displays the channel, battery status and selected mode. The transmitter sends a signal with a 2.4 gHz frequency, on up to 30 different channels. The maximum standby time is 1,000 hours for the transmitter and 400 hours for the receiver. Both the transmitter and receiver operate on two AAA batteries (not included). The receiver has a hotshoe adapter with 1/4" female thread. This allows you to mount it not only on your Canon camera, but also on a tripod (see optional accessories). The weight of the transmitter is 52.6 grams and of the receiver 36.2 grams. Usage Pixel Timer Remote Control Wireless TW-283/S1 for Sony To use the remote control, insert the AAA batteries into the transmitter and receiver compartments. To use the remote control wirelessly, turn on the receiver. Then place the receiver on the hotshoe of your camera, or optionally on a tripod. You can also use the transmitter without the receiver, by attaching the transmitter to your camera using the supplied cable. In the clear menu of the transmitter you can easily determine the mode you want to use. The transmitter has an auto-shutdown function after 30 minutes; the receiver does not switch off automatically. This product is suitable for the following cameras: html, body { height: 100%; } img.camerakabel { height: 100%; width: 100%; } If you have another camera, please contact us for a suitable product.

The Pixel Timer Remote Control Wireless TW-283/DC2 allows you to trigger your Nikon camera wirelessly, up to a distance of more than 80 meters. So you no longer have to touch the shutter release button of your camera or even be near your camera! This multifunctional set supports five different modes. For example, you can control your camera remotely for a single photo (Single shooting) or take a series of photos within 1 second (Continuous shooting). In addition, the TW-283/DC2 offers the BULB-shooting option, in which you determine the shutter speed yourself. If your camera supports long shutter speed photography, you have the option to hold down the button on the remote control so that the shutter opens. When you release the button, the shutter will close again. You can also set a timer. In this mode (Delay shooting) you can set the timer between 1 and 59 seconds, where you can also determine the number of photos (1 to 59 photos). Finally, you can set up a Timer schedule shooting, up to a maximum of 99 hours, 59 minutes and 59 seconds. You can also freely set the number of photos to be taken between 1-99, 1-999 or infinity. The set consists of the transmitter TW-283TX and receiver TW-283RX. The transmitter has a comfortable grip and has an LCD screen. It displays the channel, battery status and selected mode. The transmitter sends a signal with a 2.4 gHz frequency, on up to 30 different channels. The maximum standby time is 1,000 hours for the transmitter and 400 hours for the receiver. Both the transmitter and receiver operate on two AAA batteries (not included). The receiver has a hotshoe adapter with 1/4" female thread. This allows you to mount it not only on your Nikon camera, but also on a tripod (see optional accessories). The weight of the transmitter is 52.6 grams and of the receiver 36.2 grams. This product is suitable for the following cameras: html, body { height: 100%; } img.camerakabel { height: 40%; width: 40%; } If you have another camera, please contact us for a suitable product. Usage Pixel TW-283/DC2 for Nikon To use the remote control, insert the AAA batteries into the transmitter and receiver compartments. To use the remote control wirelessly, turn on the receiver. Then place the receiver on the hotshoe of your camera, or optionally on a tripod. You can also use the transmitter without the receiver, by attaching the transmitter to your camera using the supplied cable. In the clear menu of the transmitter you can easily determine the mode you want to use. The transmitter has an auto-shutdown function after 30 minutes; the receiver does not switch off automatically.

With the Pixel Timer Remote Control Wireless TW-283/DC0 you can trigger your Nikon camera wirelessly, up to a distance of more than 80 meters. So you no longer have to touch the shutter release button of your camera or even be near your camera! This multifunctional set supports five different modes. For example, you can remotely control your camera for a single photo (single shooting) or take a series of photos within 1 second (continuous shooting). In addition, the TW-283/N3 offers the BULB-shooting option, in which you determine the shutter speed. If your camera supports long shutter speed photography, you have the option to hold down the button on the remote control so that the shutter opens. When you release the button, the shutter will close again. You can also set a timer. In this mode (Delay shooting) you can set the timer between 1 and 59 seconds, where you can also determine the number of photos (1 to 59 photos). Finally, you can set up a Timer schedule shooting, up to a maximum of 99 hours, 59 minutes and 59 seconds. You can also freely set the number of photos to be taken between 1-99, 1-999 or infinity. The set consists of the transmitter TW-283TX and receiver TW-283RX. The transmitter has a comfortable grip and has an LCD screen. It displays the channel, battery status and selected mode. The transmitter sends a signal with a 2.4 gHz frequency, on up to 30 different channels. The maximum standby time is 1,000 hours for the transmitter and 400 hours for the receiver. Both the transmitter and receiver operate on two AAA batteries (not included). The receiver has a hotshoe adapter with 1/4" female thread. This allows you to mount it not only on your Canon camera, but also on a tripod (see optional accessories). The weight of the transmitter is 52.6 grams and of the receiver 36.2 grams. This product is suitable for the following cameras: html, body { height: 100%; } img.camerakabel { height: 40%; width: 40%; } If you have another camera, please contact us for a suitable product. Usage Pixel TW-283/DC0 for Nikon To use the remote control, insert the AAA batteries into the transmitter and receiver compartments. To use the remote control wirelessly, turn on the receiver. Then place the receiver on the hotshoe of your camera, or optionally on a tripod. You can also use the transmitter without the receiver, by attaching the transmitter to your camera using the supplied cable. In the clear menu of the transmitter you can easily determine the mode you want to use. The transmitter has an auto-shutdown function after 30 minutes; the receiver does not switch off automatically.

Increase your potentialThe USB-C multiport hub is the perfect partner for the latest super-thin laptops and MacBooks. Additional accessories require more ports that are missing in these laptops. This multiport hub provides a USB-C port for charging the device during use, an HDMI port connected to an HDMI compliant display, two USB 3.0 ports for connecting all additional accessories, and a Gigabit Ethernet port for a wired network connection. Do you also need a card reader? This hub also has an SD / microSD card reader slot! Connect a hub to your laptop's USB-C port to instantly increase your working capacity. Ultra HD resolutionThe HDMI port of the multi-port concentrator allows you to transfer the image to a TV or monitor. The hub provides a super-sharp Ultra HD 4K image ** with a wealth of details and a great viewing experience. Even with high image dynamics, the hub guarantees smooth frame change without any loss or delay. Ethernet connectionThe multiport hub also has a Gigabit Ethernet port. It works perfectly when the wireless connection is insecure or unstable; you can connect your laptop to a wired network with a Gigabit Ethernet cable. ChargingThe USB-C port guarantees uninterrupted loop-through charging. Some laptops are equipped with only one USB-C port, so using a hub means that there is no charging port in the laptop. The hub's USB-C port allows through-charging from a power source, so your laptop can be charged while using all other hub ports. Space for accessoriesDo you need to use more accessories? With three USB 3.0 ports you can connect a mouse, USB stick, hard disk or external DVD burner. With speeds up to 5 Gbps *, USB 3.0 ports allow you to create your own workspace anywhere. You don't need to use one of the USB 3.0 ports to connect a memory card reader, because the multi-port hub is also equipped with an SD / microSD memory card reader! Portable convenienceThanks to the ultra-compact design and brushed metal finish, this concentrator is ideal for BYOD (Bring Your Own Device) applications in the office and on the go. * Based on internal test results. Performance may vary depending on the speed of the source drive. Product Details USB-C multi-port hub change your notebook or smartphone into a workstation It provides the ability to charge from a USB-C port, you can easily charge a USB-C compatible device while using other ports Three USB 3.0 ports allow you to connect additional accessories The HDMI interface supports video output from a computer up to 4K ** on a 4K monitor The Gigabit Ethernet port enables a wired network connection Memory card reader slot for SD / microSD cards The sleek, compact design makes this portable device ideal for travel ** Provided that the computer supports 4K. The HDMI port requires a direct HDMI to HDMI connection

• FM PLL radio with 20 station presets • Clock with dual alarm and snooze function • Qi wireless charging function • USB port for charging the phone and other portable devices • Large LED display • Alarm settings (daily, weekdays, weekends) • Adjustable display dimming • Alarm by radio or buzzer • Outdoor temperature sensor • Built-in internal temperature sensor • AC adapter: DC 5V 2.5A • Memory backup: CR2032 (not included in the set) • Dimensions: 210 (W) x 119.3 (H) x 90 (D) mm • Weight: 0.2 kg

SmallRig 5746 Wireless Display Mirroring Adapter for Mobile Phone (Selfie Kit)This product attaches magnetically to MagSafe-compatible iPhones. For other smartphones, use the included metal ring on your phone or its case. A standard 1/4"-20 threaded hole allows for secure mounting on tripods and other equipment.This setup allows you to comfortably monitor a live feed from your phone, even for shots from low or difficult angles.Video Compatibility:iPhone Native Camera: Supports 4K/24fps & 4K/30fps recording. 4K/60fps and higher may experience lag.Blackmagic Camera App: Fully compatible with all 4K recording modes.Compatibility:Compatible with iPhone 12 and newer. Also works with any smartphone using a metal ring.Packaging includes:Display AdapterWireless Remote ControllerMetal RingCharging CableOperating Instruction

functions Control your home's temperature from anywhere with the Tellur Smart app – all you need is a smartphone and an active internet connection Fully customizable, supports automation and smart scripts Voice control via Google Assistant, Amazon Alexa and Siri Shortcuts Multiple functions: child protection, frost protection, periodic descaling, open window detection, low battery alarm Statistics and history of temperature change Technical data Application: Thermostatic radiator valves Brand Compatibility: Universal Power supply: 3 x 1.5 V AA alkaline batteries (not included) Connector: M30 x 1.5mm Adapters included: Danfoss RA / RAV / RAVL, Caleffi, Giacomini, M28 Connection: WiFi (no additional gateway required) Linear travel: 4.3 mm Temperature setting range: 5 - 35° C Screen: LED Hysteresis: 0.5°C Accuracy of temperature measurement: 0.1°C Temperature calibration: Yes, via app Temperature statistics: Yes, according to the program Weekly programming: Yes, up to 4 periods each day Frost protection: Yes Child lock: Yes Display parameters: set temperature, WiFi, heating, automatic, low battery App Name: Tellur Smart Amazon Alexa: Yes, compatible Google Assistant: Yes, compatible Siri Shortcuts: Yes, compatible Open window detection: Yes, 1.5°C drops in 4.5 minutes Low battery alarm: Yes Anti-scaling function: descaling every Monday at 12:00 p.m Power saving mode: after 5 seconds of inactivity Wireless frequency: 2.4 GHz WiFi standard: IEEE 802.11b/g/n Security: WPA-PSK/ WPA2-PSK /WPA/WPA2/WEP Encryption type: WEP/TKIP/AES Compatibility: Devices with Android 6 / iOS 11 or later Color: white Product dimensions: 58.4 x 58.4 x 97 mm Product weight: 130gr The package includes: 1 x thermostatic radiator valve RVSH1 1x set of adapters