ABS 1.75

Number of Hoses: 6

Number of Hoses: 6

Sunlu S4 Filament DryerThe SUNLU FilaDryer S4 is an advanced filament dryer designed for demanding 3D printing users. It offers a massive capacity—drying up to 4 spools (1 kg each) simultaneously—and the ability to work with multiple printers at once. With a power output of 320–330 W, rapid heating (up to 50°C in just 30 minutes), and a maximum temperature of 70°C, the device ensures effective and uniform drying of even the most demanding materials, such as PA or PC. The built-in humidity control system, touchscreen, 8 filament outputs, and predefined material profiles make using the device not only effective but also extremely convenient.Dry up to 4 filaments simultaneously – maximum productivityThanks to the large chamber (450 × 210 × 211 mm), you can dry up to four spools of filament at the same time. This is the perfect solution for multicolor printing or working with multiple printers simultaneously. You don’t waste time changing materials—everything is ready in one place, which significantly speeds up and streamlines the entire process.Instant heating and high power – efficiency that makes a differencePerformance is ensured by a PTC heater with a power of up to 330 W, which allows it to reach 50°C in about 30 minutes and a maximum of 70°C. This means shorter filament preparation time and greater drying efficiency. Even difficult, hygroscopic materials regain their properties faster than ever before.Ideal temperature balance – perfect drying for every spoolA three-fan system (on the sides and bottom) ensures even air circulation and temperature stability within ±3°C. This ensures that every section of the filament is dried evenly, resulting in better print quality, greater consistency, and no surprises during operation.Smart humidity control – filament always in perfect conditionAn advanced humidity control system automatically starts drying when the humidity level exceeds the set range (30–50%) and stops the process once optimal conditions are reached (approx. 25%). This means full automation and the assurance that the filament is always ready for use—without manual monitoring.Safety and ease of use – technology you can rely onThe SUNLU S4 is equipped with a triple safety system: a PTC heater, a temperature sensor, and software protection. The device monitors temperature in real time and alerts you to any abnormalities, ensuring safe operation. Additionally, the touchscreen and pre-set profiles for PLA, ABS, PETG, TPU, PA, and PC simplify operation and eliminate the guesswork involved in settings.Full compatibility and flexibility – tailor the equipment to your needsSupport for filaments with diameters of 1.75 mm, 2.85 mm, and 3.00 mm, along with compatibility with most 3D printers, ensures the SUNLU S4 performs well in any environment. Eight filament outputs and the ability to connect multiple printers simultaneously allow for flexible workstation configuration. This device truly expands your capabilities and lets you create without limits.Included: SUNLU S4 Filament Dryer Power cord PTFE tubes User manual Manufacturer Sunlu Model Fila Dryer S4 Rated power 320–330 W Power supply AC 100–240 V / 50–60 Hz Maximum temperature 70°C Heating time to 50°C approx. 30 minutes Capacity 4 spools (1 kg each) Internal dimensions 450 × 210 × 211 mm Device dimensions 516 × 278 × 350 mm Net weight 4.8 kg Gross weight 5.5 kg Heating system PTC + 3 fans Temperature stability ±3°C Humidity control Automatic (start 30–50%, stop approx. 25%) Supported materials PLA, ABS, PETG, TPU, PA, PC Supported filament diameters 1.75 mm / 2.85 mm / 3.00 mm Number of filament outlets 8 (can be used with PTFE tubes) Display Touchscreen LCD

Creality CFS multi-filament systemCreality CFS is an advanced multi-filament system that allows 3D printing in as many as 4 colors simultaneously (expandable to 16 colors), eliminating the need to paint models afterwards. Thanks to intelligent features such as automatic filament identification, smooth spool changes and abnormality detection, the printing process is seamless. An airtight design with moisture absorbers protects the filament from humidity, and an easy-to-read display allows you to monitor storage conditions in real time. Compatibility with Creality Hyper Series cardboard spools and practical solutions like the spring-loaded batten bar mechanism make the CFS an indispensable tool for any 3D creator.Intelligent print support and automationCreality CFS allows printing with support materials that can be easily removed - either mechanically or by dissolving in water. This keeps the final model free of support marks, significantly improving the aesthetics and precision of the prints. Equipped with advanced sensors, the CFS system automatically detects any irregularities during printing. If a problem is detected, it immediately stops the job and informs the user, eliminating the risk of damaging the project. The function of automatic identification of the filament with RFID tags allows immediate recognition of the type, color and properties of the material, and for standard filaments, the information can be entered manually.Smooth operation without downtimeThe CFS system intelligently manages filament changes during multicolor printing. When a spool runs out, the device automatically switches to the next appropriate filament, minimizing waste and eliminating downtime. The automatic filament mapping function ensures full synchronization with Creality 3D printers and Creality Print software, making the printing process seamless.Thoughtful designThe airtight design of the CFS, supported by special moisture absorbers, effectively protects the filament from absorbing moisture from the air. A built-in temperature and humidity display allows ongoing monitoring of storage conditions, and the system alerts the user if the optimum humidity level is exceeded. A spring-loaded batten bar mechanism prevents the filament from popping out of the slot during printing, and compatibility with Creality Hyper Series cardboard spools means you can take advantage of eco-friendly solutions without additional adapters. Manufacturer Creality Product name CFS (Creality Filament System) Number of filament slots 4 Rated power 20 W Rated voltage DC 24 V Connectivity CFS: ≤4 Product dimensions 379 × 314 × 276 mm Weight 4.56 kg Status indicators 4 (one for each slot) Printing in multiple colors Supported Automatic filament switching Supported RFID tag reading Supported End of Filament Detection Supported Filament buffer Supported Moisture-resistant storage Yes, with moisture absorbers Compatible Films PLA, ABS, PETG, ASA, PET, PA-CF, PLA-CF (incompatible with moisture resistant filaments, TPU95A and other flexible materials) Filament diameter 1.75 ± 0.05 mm Spool requirements A 1 kg spool or any spool with a diameter of 197-202 mm and a width of 42-68 mm

Longer LK10 3D PrinterThe Longer LK10 is a 3D printer designed for fast and convenient project completion. It offers a build volume of 225 × 225 × 265 mm, print speeds of up to 500 mm/s, and a Direct Drive extruder with a flow rate of up to 25 mm³/s. A nozzle reaching 300°C and a heated bed up to 110°C allow for the use of PLA, PETG, ABS, ASA, and TPU filaments. Automatic leveling, Auto Z-Offset, filament end detection, and resume-on-power-loss features make operation more convenient. Wi-Fi, LAN, and USB connectivity, along with compatibility with Windows and Mac, allow for convenient print management.Fast Direct Drive ExtruderThe printer is equipped with a Direct Drive extruder featuring a precision gear mechanism that ensures smooth material feed even during high-speed printing. The High-Flow Hotend system achieves a volumetric flow rate of up to 25 mm³/s, allowing for high-quality models even with more demanding projects. A maximum print speed of up to 500 mm/s results in shorter print times without sacrificing detail.Less vibration and ghostingThe Klipper software, featuring the Vibration Calibration function, ensures smooth operation of the device. Input Shaping technology reduces ghosting and wall waviness, ensuring models maintain high accuracy even at high speeds. This solution results in a more aesthetically pleasing appearance of prints and greater detail consistency.Wide range of supported materialsA nozzle temperature of up to 300°C and a heated build plate reaching 110°C allow for printing with many popular 1.75 mm filaments. The printer supports PLA, PETG, ABS, ASA, and TPU, making it suitable for both simple decorative models and more durable functional parts. The adjustable layer height from 0.1 to 0.4 mm allows you to tailor print quality and speed to a specific project.Automatic CalibrationThe LK10 features automatic leveling of the heated build plate and an Auto Z-Offset function that automatically sets the correct distance between the nozzle and the build surface. This solution reduces the need for manual configuration and allows you to start printing faster. The “load filament, click print, and walk away” operation system makes the device convenient even for less advanced users.Sensorless HomingThe printer uses a Sensorless Homing system that performs X and Y axis homing without the use of traditional mechanical limit switches. Stepper motors detect resistance and automatically determine the axis position, which simplifies the device’s design and reduces the number of wear-prone components. This solution also contributes to more stable operation of the entire system.Safe PrintingThe power-outage resume feature allows printing to continue from the last saved layer, reducing the risk of losing hours of work. The filament end sensor monitors material flow in real time and stops printing when an empty spool is detected. The Object Exclusion feature allows you to cancel the printing of a single defective model without interrupting work on the remaining items on the build plate.Easy operation and connectivityAn intuitive, multilingual touchscreen simplifies daily operation and provides quick access to settings. The printer supports Wi-Fi, LAN, and USB flash drive connectivity, allowing you to conveniently transfer files and manage prints in various ways. Compatibility with Windows and Mac systems, along with support for STL, OBJ, and STEP formats, enables convenient model preparation in popular software and the OrcaSlicer slicer.Metal constructionThe metal frame increases structural rigidity and reduces vibrations during high-speed printing, which positively impacts print quality. The printer measures 423 × 437 × 492 mm and weighs 8.3 kg, offering a large workspace while maintaining a compact form factor for placement on a desk, in a studio, or in a workshop.Dual Z-axisA dual Z-axis system with two independent motors and trapezoidal screws ensures smooth head movement. This solution improves print precision, enh

Longer LK10 Plus 3D PrinterThe Longer LK10 Plus is a 3D printer designed for fast and convenient project completion. It offers a build volume of 320 × 320 × 400 mm, print speeds of up to 500 mm/s, and a Direct Drive extruder with a flow rate of up to 25 mm³/s. A nozzle reaching 300°C and a heated bed up to 110°C allow for the use of PLA, PETG, ABS, ASA, and TPU filaments. Automatic leveling, Auto Z-Offset, filament end detection, and resume-on-power-loss features make operation more convenient. Wi-Fi, LAN, and USB connectivity, along with compatibility with Windows and Mac, allow for convenient print management.Fast Direct Drive ExtruderThe printer is equipped with a Direct Drive extruder featuring a precision gear mechanism that ensures smooth material feeding even during high-speed printing. The High-Flow Hotend system achieves a volumetric flow rate of up to 25 mm³/s, allowing for high-quality models even with more demanding projects. A maximum print speed of up to 500 mm/s results in shorter print times without sacrificing detail.Less vibration and ghostingThe Klipper software, featuring the Vibration Calibration function, ensures smooth operation of the device. Input Shaping technology reduces ghosting and wall waviness, ensuring models maintain high accuracy even at high speeds. This solution results in a more aesthetically pleasing appearance of prints and greater detail consistency.Wide range of supported materialsA nozzle temperature of up to 300°C and a heated build plate reaching 110°C allow for printing with many popular 1.75 mm filaments. The printer supports PLA, PETG, ABS, ASA, and TPU, making it suitable for both simple decorative models and more durable functional parts. The adjustable layer height from 0.1 to 0.4 mm allows you to tailor the print quality and speed to a specific project.Automatic CalibrationThe LK10 Plus features automatic leveling of the heated build plate and an Auto Z-Offset function that automatically sets the correct distance between the nozzle and the build surface. This solution reduces the need for manual configuration and allows you to start printing faster. The “load filament, click print, and walk away” operation system makes the device convenient even for less advanced users.Sensorless HomingThe printer uses a Sensorless Homing system that performs X and Y axis homing without the use of traditional mechanical limit switches. Stepper motors detect resistance and automatically determine the axis position, which simplifies the device’s design and reduces the number of wear-prone components. This solution also contributes to more stable operation of the entire system.Safe PrintingThe power-outage resume feature allows printing to continue from the last saved layer, reducing the risk of losing hours of work. The filament end sensor monitors material flow in real time and stops printing when an empty spool is detected. The Object Exclusion feature allows you to cancel the printing of a single defective model without interrupting work on the remaining parts on the build plate.Easy operation and connectivityAn intuitive, multilingual touchscreen simplifies daily operation and provides quick access to settings. The printer supports Wi-Fi, LAN, and USB flash drive connections, allowing you to conveniently transfer files and manage prints in various ways. Compatibility with Windows and Mac systems, along with support for STL, OBJ, and STEP formats, enables convenient model preparation in popular software and the OrcaSlicer slicer.Metal ConstructionThe metal frame increases structural rigidity and reduces vibrations during high-speed printing, which positively impacts print quality. The printer offers a large build volume of 320 × 320 × 400 mm, making it suitable for larger models and printing multiple parts simultaneously.Dual Z-axisA dual Z-axis system with two independent motors and trapezoidal screws ensures smooth head movement. This solution improves print precision, enhances dimensional

QiDi Q2C Combo 3D printerThe QiDi Q2C Combo printer is a modern device designed for fast and precise 3D printing. It offers a large workspace, high hotend operating temperature, and stable CoreXY construction, making it suitable for both hobbyist projects and more demanding technical applications. With support for multiple filament types and the ability to work with the QIDI Box system for multi-color printing, the printer offers great freedom in model creation.Large workspaceThe QiDi Q2C Combo offers a working area of 270 × 270 × 256 mm, allowing you to print larger parts or multiple models at the same time. This workspace gives you more design freedom and reduces the need to split models into smaller parts. The stable construction of the device, measuring 402 × 438 × 494 mm, ensures adequate rigidity during operation.New generation automatic levelingThe printer uses a modern leveling sensor in which the nozzle itself acts as a sensor. This means direct contact with the work table surface, which eliminates the problem of probe offset and measurement errors. The system works independently of the type of table surface or environmental vibrations, so the first layer is accurate and repeatable. This makes printer configuration easier and the leveling process automatic.High speed and precision of movementThe QiDi Q2C Combo is equipped with a CoreXY design and a new 1.5GT drive belt with increased tooth density. This solution improves smoothness of movement and reduces vibrations that can affect print quality. The printer achieves a head speed of up to 600 mm/s and acceleration of up to 20,000 mm/s², which significantly reduces printing time without compromising precision.Modern hotend up to 370°CThe new generation hotend allows operation at temperatures up to 370°C. The design with a ceramic throat and an improved heat dissipation system reduces the risk of nozzle clogging. The bimetallic hardened steel nozzle is wear-resistant, making it well suited for filaments containing carbon or glass fibers.Support for multiple materialsThe printer supports a wide range of 1.75 mm diameter filaments. It is possible to print with popular materials such as PLA, PETG, and ABS, but also with more demanding materials such as ASA, TPU, PA, and PC. Thanks to its durable nozzle and steel extruder gears, the printer can also handle filaments reinforced with carbon or glass fibers.Stable work platformThe model is equipped with a heated work table with an aluminum base that reaches a temperature of up to 120°C. Its surface features a double-sided magnetic PEI plate, which ensures good adhesion of prints during operation and facilitates their quick removal after printing.Convenient operation and connectivityThe printer has a 4.3-inch color touch screen that allows for convenient control of the device's functions. It supports Wi-Fi, Ethernet, and USB connectivity, making it easy to transfer files for printing. The device works with QIDI Studio software and popular slicers such as Orca and PrusaSlicer. Supported file formats include STL, OBJ, 3MF, STEP, and STP.Additional features for increased convenienceThe QiDi Q2C Combo is equipped with a power loss recovery feature and a filament end sensor. The printer also supports an optional camera with timelapse function and an air filter. Additionally, it can be used with the QIDI Box system, which allows for multi-color printing and material feed control. Manufacturer QiDi Model Q2C Combo Printing technology FDM Working area 270 × 270 × 256 mm Maximum printing speed up to 600 mm/s Maximum acceleration up to 20000 mm/s² Filament diameter 1.75 mm Nozzle diameter 0.4 mm Maximum head temperature up to 370°C Maximum table temperature up to 120°C Compatible filaments PLA, ABS, ASA, PETG, TPU, PA, PC, and carbon fiber or glass fiber reinforced filaments Multi-color system Compatible with QIDI Box Screen 4.3 inches, touchscreen (480 × 272) Connectivity 2.4 GHz Wi-Fi, Ethernet, USB Memory 32 GB eMMC + USB Flash Drive

Creality Ender-5 MaxThe Creality Ender-5 Max is a 3D printer designed for demanding users and professional projects. The solid, all-metal frame and 36-point automatic table leveling system guarantee excellent print quality from the first layer. Every detail of the model is precisely reproduced, and the print surface remains perfectly smooth. The consistency of layers and robustness of prints will satisfy even the most demanding customers.Unmatched print speed and workspaceThe Ender-5 Max impresses with its print speed, reaching up to 700 mm/s - a leading performance among CoreXY printers. Thanks to its precision design and advanced components, high-speed printing does not mean compromising on quality. Whether you're printing prototypes, technical details or decorative elements, every print is perfectly reproduced. With the device's impressive working space, you can realize larger projects without the need to divide them into parts - the Ender-5 Max allows you to print large models in one piece or mass produce smaller parts. It's ideal for professional workshops, manufacturing companies and 3D printing enthusiasts.Stability, versatility and precisionSolid cast aluminum construction and precision linear guides on the X-axis ensure smooth head movement without the slightest deviation. Two independent Z-axis motors, supported by pairs of leadscrews and linear guides, allow models weighing up to 10 kg to be lifted without problems. That's the end of problems with shifting layers or visible lines on the print surface. The ability to manage multiple printers via WLAN and tri-color status indicators that can be seen from up to 10 meters away make workflow easier. An optional enclosure allows the printer to maintain a higher ambient temperature, which is essential when printing with engineered filaments such as ABS or ASA.Ready to work in all conditionsThe printer operates stably at temperatures from 5 to 40°C, with no risk of clogging the print head, even during prolonged operation. The 1,000-watt heating table heats up quickly, allowing printing with a wide range of filaments, including PLA, PETG, PA, ABS and ASA. The Ender-5 Max supports input voltages from 100 to 240 V, eliminating the need to manually select settings. Thanks to its silent operation mode (noise level of less than 55 dB), the Ender-5 Max does not interfere with daily operations. Features of automatic filament loading and unloading, input resource sharing, 8 GB of ROM and Wi-Fi connectivity make printing simpler and more intuitive than ever before. Manufacturer Creality Model Ender-5 Max Printing technology Fused Deposition Modeling (FDM) Working volume 400 × 400 × 400 mm Printer dimensions 649 × 721 × 850 mm Printer weight ≤ 25.9 kg Printing speed ≤ 700 mm/s Acceleration ≤ 20,000 mm/s² Printing accuracy 100 ± 0.1 mm Layer height 0.05-0.3 mm Extruder Direct Drive Extruder Filament diameter 1.75 mm Nozzle diameter 0.4 mm (compatible with 0.6/0.8 mm nozzles) Nozzle temperature ≤ 300°C Working table temperature ≤ 100°C Working platform Flexible epoxy plate Leveling system Automatic leveling at 36 points Indicator lighting Red/Green/Yellow File transfer USB drive / Wi-Fi Screen Color touch screen 4.3 inches Camera Optional Recovery after power loss Yes Sensor for lack of filament Yes Input Shaping (signal shaping) Yes Lighting kit Yes Sleep mode Yes Rated voltage 100-240 V AC, 50/60 Hz Rated power 1250 W Operating temperature 5°C - 40°C Supported filaments Hyper PLA, PLA, PETG, TPU95A, ABS, ASA, PLA-CF, PA, PLA-Silk File format for printing G-Code Cutting software Creality Print 5.1 Cutting file formats STL, OBJ, 3MF Cloud printing application Creality Cloud User interface languages English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Korean, Chinese

QIDI Max 4 3D printerThe QIDI Max 4 is an advanced 3D printer designed for large projects and working with demanding materials. The large workspace, high head temperature, and active chamber heating allow you to print both standard filaments and engineering materials. The CoreXY design, fast closed-loop motors, and extensive cooling system ensure that the device works quickly, stably, and precisely.Large workspaceThe QIDI Max 4 offers a working area of 390 × 390 × 340 mm. Such a large print volume allows you to create large models in one piece without having to divide the project into smaller parts. This saves you time on assembly and maintains the strength of the finished model.High print head temperature for technical materialsThe print head reaches a temperature of up to 370°C, which allows you to work with a wide range of filaments – from PLA and PETG to more demanding materials such as PC or carbon fiber composites. The ceramic throat and improved heat dissipation module reduce the risk of nozzle clogging, keeping printing stable even at high temperatures.Active chamber heatingThe third generation of active chamber heating reaches temperatures of up to 65°C. Combined with the air circulation system, this creates a stable environment for printing materials that are prone to deformation. As a result, even large models made of PLA or ABS retain their geometry and do not curl at the edges.Very fast and precise printingThe use of FOC stepper motors in a closed loop increases drive efficiency by up to 65%. The maximum printing speed reaches 800 mm/s, and the acceleration reaches 30,000 mm/s². This configuration significantly reduces project completion time while maintaining high accuracy.Stable CoreXY designThe CoreXY motion system with 10 mm wide 1.5GT belts ensures high rigidity and accuracy of the head guidance. The X-axis uses a high-hardness linear guide, the Y-axis uses 12 mm steel shafts, and the Z-axis uses four guides and two independent motors with trapezoidal screws. This allows the printer to remain stable even with large and heavy models.Automatic leveling and print controlThe printer is equipped with automatic table leveling with a load cell sensor integrated into the hot end. The monitoring system includes a filament end sensor, an AI camera, and a print resume function after a power failure. This makes the printing process safer and requires less manual control.Air filtration and convenient operationThe QIDI Max 4 has a 3-stage air filtration system consisting of a G3 pre-filter, HEPA H12 filter, and activated coconut carbon. The printer is also equipped with a 5-inch touch screen, Wi-Fi and Ethernet connectivity, and a 1080p camera for viewing and recording timelapse footage of the printing process.Included Filament holder with pneumatic head Filament spool holder Holder cover Case door handle Spare parts kit Mechanism maintenance oil 7 mm wrench Power cord Ethernet cable USB flash drive with software and files Flat screwdriver Adhesive for the work surface to improve print adhesion Set of Allen keys (H1.27, H1.5, H2, H2.5, H3) Scraper for removing prints from the table Manufacturer QiDi Model Max 4 Working area 390 × 390 × 340 mm Printer dimensions 558 × 578 × 612 mm Weight 40 kg Maximum head temperature up to 370°C Maximum table temperature up to 120°C Chamber temperature up to 65°C (active heating – 3rd generation) Maximum print speed 800 mm/s Maximum acceleration 30,000 mm/s² Extruder Direct Drive, hardened steel double gears Supported filaments PLA, ABS, ASA, PETG, TPU, PA, PC, carbon fiber and glass fiber composites Filament diameter 1.75 mm Material flow 40 mm³/s Automatic leveling yes (load cell sensor in hotend) Filament sensor Yes – filament end detection Air filter 3-in-1: G3 + HEPA H12 + activated carbon Camera 1080p with timelapse support Connectivity Wi-Fi 2.4/5 GHz, Ethernet, USB Memory 32 GB eMMC + USB 2.0 Screen 5" touchscreen 800 × 480 Supported file formats STL, OBJ, 3MF, STEP, STP Software Q

QIDI Max 4 Combo 3D printerQIDI Max 4 is an advanced 3D printer designed for large projects and working with demanding materials. Its large workspace, high head temperature, and active chamber heating allow you to print both standard filaments and engineering materials. The CoreXY design, fast closed-loop motors, and extensive cooling system ensure that the device works quickly, stably, and precisely.Large workspaceThe QIDI Max 4 offers a working area of 390 × 390 × 340 mm. Such a large print volume allows you to create large models in one piece without having to divide the project into smaller parts. This saves you time on assembly and maintains the strength of the finished model.High print head temperature for technical materialsThe print head reaches a temperature of up to 370°C, which allows you to work with a wide range of filaments – from PLA and PETG to more demanding materials such as PC or carbon fiber composites. The ceramic throat and improved heat dissipation module reduce the risk of nozzle clogging, keeping printing stable even at high temperatures.Active chamber heatingThe third generation of active chamber heating reaches temperatures of up to 65°C. Combined with the air circulation system, this creates a stable environment for printing materials that are prone to deformation. As a result, even large models made of PLA or ABS retain their geometry and do not curl at the edges.Very fast and precise printingThe use of FOC stepper motors in a closed loop increases drive efficiency by up to 65%. The maximum printing speed reaches 800 mm/s, and the acceleration reaches 30,000 mm/s². This configuration significantly reduces project completion time while maintaining high accuracy.Stable CoreXY designThe CoreXY motion system with 10 mm wide 1.5GT belts ensures high rigidity and accuracy of the head guidance. The X-axis uses a high-hardness linear guide, the Y-axis uses 12 mm steel shafts, and the Z-axis uses four guides and two independent motors with trapezoidal screws. This allows the printer to remain stable even with large and heavy models.Automatic leveling and print controlThe printer is equipped with automatic table leveling with a load cell sensor integrated into the hot end. The monitoring system includes a filament end sensor, an AI camera, and a print resume function after a power failure. This makes the printing process safer and requires less manual control.Air filtration and convenient operationThe QIDI Max 4 has a 3-stage air filtration system consisting of a G3 pre-filter, HEPA H12 filter, and activated coconut carbon. The printer is also equipped with a 5-inch touch screen, Wi-Fi and Ethernet connectivity, and a 1080p camera for viewing and recording timelapse footage of the printing process.Included Filament holder with pneumatic head Filament spool holder Holder cover Case door handle Spare parts kit Mechanism maintenance oil 7 mm wrench Power cord Ethernet cable USB flash drive with software and files Flat screwdriver Adhesive for the work surface to improve print adhesion Set of Allen keys (H1.27, H1.5, H2, H2.5, H3) Scraper for removing prints from the table Manufacturer QiDi Model Max 4 Working area 390 × 390 × 340 mm Printer dimensions 558 × 578 × 612 mm Weight 40 kg Maximum head temperature up to 370°C Maximum table temperature up to 120°C Chamber temperature up to 65°C (active heating – 3rd generation) Maximum print speed 800 mm/s Maximum acceleration 30,000 mm/s² Extruder Direct Drive, hardened steel double gears Supported filaments PLA, ABS, ASA, PETG, TPU, PA, PC, carbon fiber and glass fiber composites Filament diameter 1.75 mm Material flow 40 mm³/s Automatic leveling yes (load cell sensor in the hotend) Filament sensor yes – filament end detection Air filter 3-in-1: G3 + HEPA H12 + activated carbon Camera 1080p with timelapse support Connectivity Wi-Fi 2.4/5 GHz, Ethernet, USB Memory 32 GB eMMC + USB 2.0 Screen 5" touchscreen 800 × 480 Supported file formats STL, OBJ, 3MF, STEP, STP Soft

Creality K2 Plus Combo 3D PrinterThe Creality K2 Plus Combo is a 3D printer with a large (350 x 350 x 350 mm) workspace that allows for fast and precise printing of larger models. With its robust design, optional CFS multicolor system and advanced extruder, the device guarantees high quality prints and reliability, meeting the needs of beginners and professionals alike. The kit also includes the CFS system.CFS system - convenient management of filamentsThe CFS system (Color Filament System) is an innovative solution, allowing you to use 4 filaments simultaneously. Equipped with an RFID module, it automatically recognizes the filaments and adjusts the printing parameters. It supports materials with a diameter of 1.75 mm, such as PLA, PETG, ABS or PLA-CF, and thanks to an active LCD display, it enables control of temperature and storage humidity. The 4-slot design and LED indicators make it convenient to use, and the printer's power supply eliminates the need for additional power sources. The CFS allows you to create multi-color models and work with a variety of filaments, offering unparalleled precision and convenience.Large workspace for greater freedomThe Creality K2 Plus Combo offers a working space of 350 x 350 x 350 mm, which allows the printing of large models without the need to split them. This makes the device ideal for complex projects such as prototypes, decorations or architectural models.Reliable "Matrix" design and stable operationThe "Matrix" frame made of cast aluminum provides exceptional rigidity and durability. Thanks to its robust design and a double Z-axis supported by four linear guides, the device operates stably even when printing at high speeds. This solution minimizes vibration, which is crucial when creating precision parts.Actively heated chamber and versatile filament supportOne of the key advantages of the K2 Plus Combo is its ability to work with a wide range of filaments, such as PLA, ABS, PETG, PA (nylon), etc. The actively heated chamber provides the right conditions for printing even the most demanding filaments, allowing you to achieve professional results. In addition, thanks to the CFS system (included), the K2 Plus Combo allows you to print up to 16 colors simultaneously.New generation precision extruderThe K2 Plus Combo is equipped with an advanced extruder with direct filament feeding function, which guarantees precise and stable printing. The 0.4mm diameter nozzle can reach temperatures of up to 350°C, allowing it to work with a variety of filaments. In addition, the quick-change nozzle system improves maintenance of the device.Intelligent print monitoring with AI camerasDual AI cameras monitor the printing process in real time, adjusting filament flow and identifying potential errors such as nozzle blockages. These features guarantee stable operation and minimize the risk of print failure. The K2 Plus Combo also offers automatic leveling, which saves the user time and ensures a perfectly smooth first layer.Drive system and quiet operationThe printer uses an advanced drive system with a high-precision stepper motor to achieve print speeds of up to 600 mm/second at an acceleration of 30,000 mm/second. Despite its high power, the K2 Plus Combo runs extremely quietly (45 dB), making it an ideal choice for both the office and home.Innovative features - from filament cutting to active belt tensioningThe K2 Plus Combo offers amenities that make the printing process even more efficient. The built-in automatic filament cutting system eliminates unnecessary manual operations, while the active belt tensioning system ensures precise print head movements, which affects the quality of prints.Easy operationThe printer is ready to use right out of the box. The calibration process is intuitive and quick, allowing the user to focus on completing projects. The built-in RFID reader automatically recognizes the filaments and selects the optimal print settings, which minimizes the risk of errors and saves t