Carbon Monoxide Sensor

Habotest HT66 mini gas leak detectorThe Habotest HT66 compact gas leak detector detects many different types of flammable gases and ensures safety at home, in the office or during industrial work. It has a high-quality sensor and is extremely precise - its accuracy is ≤10% FS and sensitivity is

X-Sense XC0C-iR Wi-Fi carbon monoxide detectorThe X-Sense XC0C-iR is a Wi-Fi-enabled carbon monoxide detector that combines classic home protection with instant notifications on a mobile app. In the event of an emergency, it notifies you with a loud alarm, a clear message on the screen and an alert on your phone, allowing you to react even when no one is home.In-app notificationsWhen connected to the X-Sense Home Security app, the sensor sends real-time notifications, showing the current CO concentration in ppm during an alert. The app also notifies you of pre-alerts, low battery levels and possible device malfunctions, and allows you to view your carbon monoxide alarm history. It is possible to share the sensor with other household members, so that alert notifications go to several people at once. A 2.4GHz Wi-Fi connection is required for the smart function to work.Two-stage alertingThe XC0C-iR supports two warning levels - a preventive alarm and a full CO alarm. When the concentration of carbon monoxide is elevated, but has not yet reached the alarm threshold, you will receive an alert in the app. If the CO level persists longer, the sensor enters full alert mode, sounding a beep and sending another notification.Precise CO measurement.The high-performance electrochemical CO sensor provides accurate and stable measurements of carbon monoxide concentration. The device meets the requirements of EN 50291-1:2018, which means that the alarm triggers at specific time intervals depending on the level of CO detected.Easy-to-read display and signalingThe backlit LCD display shows the current CO concentration in ppm, allowing quick assessment of the situation without reaching for the phone. It is complemented by LED signaling that indicates the device's operating status, alarm, battery problems or malfunction.Loud local alarmWhen a dangerous concentration of carbon monoxide is detected, the sensor triggers an audible alarm with a volume of at least 85 dB. The signal is clearly audible, so it warns occupants of the house even while they are sleeping.One-click silencingThe alarm can be silenced locally with the Test/Silence button or remotely in the mobile app when the situation is checked and deemed safe. The mute function works temporarily, after which the sensor automatically returns to normal standby mode.Flexible mountingThe sensor can be placed on a flat surface or mounted on a wall using the included mounting hardware. It is recommended that the device be placed in an area where the occupants of the house are in daily life - away from obstacles that may restrict the free flow of air, so that detection is as effective as possible.Exceptional durabilityThe device has an expected lifespan of up to 10 years. Power is provided by a replaceable battery, and a notification system alerts you to low power, malfunction or end of life, allowing you to maintain the highest level of security.Included: Carbon monoxide detector CR123A 3 volt battery Mounting screw x2 Spacer pin x2 Supporting label for hole spacing User manual Manufacturer X-Sense Model XC0C-iR Power supply 1 × CR123A 3 V battery (replaceable) Battery life Up to 1 year (when tested once a week) Product lifetime 10 years Sensor type electrochemical Safety standards EN 50291-1:2018 CO alarm response time. 50 ppm: 60-90 minutes100 ppm: 10-40 minutes300 ppm: 0-3 minutes Operating temperature 4.4 to 37.8°C Operating humidity 10 to 85% RH (non-condensing) Alarm volume ≥ 85 dB from a distance of 3 m Alarm silencing time ≤ 9 minutes Wi-Fi operating frequency 2400-2483.5 MHz Maximum RF power 100 mW Weight 148 g Dimensions 142 × 75 × 32 mm

X-Sense SBS50 base stationThe X-Sense SBS50 is the centerpiece of your home security system, allowing you to monitor and manage your sensor network in real time. With the ability to connect up to 50 devices and support for the X-Sense Home Security mobile app, the base station allows convenient access to alerts and notifications from anywhere. It's ideal for homes that require an extensive protection system against fire, carbon monoxide and other threats. Enjoy peace of mind every day!Advanced device connectionsThe SBS50 supports up to 50 devices, allowing you to create a comprehensive security system. You can connect a variety of sensors, such as smoke detectors, carbon monoxide detectors and heat detectors, providing complete protection for every room in the house. Thanks to its wide wireless transmission range, the base station can easily handle even large properties.Loud alarm and visual notificationsThe base station is equipped with a loud 100 dB alarm that alerts you to a threat as soon as any sensor in the system detects a problem. In addition, you can receive notifications to your mobile devices with the X-Sense Home Security app. This allows you to respond quickly, no matter where you are.Monitoring and management through the appWith the mobile app, you can also remotely monitor your security system, receiving notifications about sensor status, battery levels and other important parameters. The app supports both Android and iOS, allowing for broad compatibility. Note: the base station operates at 2.4 GHz.Easy installation and operationThe X-Sense SBS50 base station is very easy to install, thanks to the included accessories. All you need to do is connect the device to power and pair it with the sensors in your home. The simple installation means you can quickly start using the system and enjoy peace of mind knowing your home is properly protected.Included X-Sense SBS50 base station Power supply Power cable User manual Manufacturer X-Sense Model SBS50 Power supply Input: 100-240 V AC 50/60 Hz; Output: 5.0 V 1.0 A Operating temperature 40-100°F (4.4-37.8°C) Operating humidity 0-85% (non-condensing) Alarm volume 100 dB Wi-Fi frequency 2.4 GHz (incompatible with 5 GHz Wi-Fi) Wi-Fi transmission range 50 m Wireless protocol IEEE 802.11b/g/n Operating frequency 868 MHz (EU) Supported devices Up to 50 devices

X-Sense XC01-R carbon monoxide detectorThe X-Sense XC01-R provides reliable protection against the dangers of this odorless and invisible gas. Using an advanced electrochemical sensor, the device accurately monitors CO concentrations, offering immediate warning when a threat is detected. Equipped with a replaceable CR123A battery, it offers long-lasting performance, and the maximum CO concentration memory function keeps track of peak carbon monoxide levels since the last reset.Functional LCD displayThe XC01-R sensor has an easy-to-read LCD display that shows the current CO concentration in the room. With LED indicators in three colors (green - power, yellow - failure or low battery, red - alarm), you are always aware of the sensor's operating status.Carbon monoxide concentration warningWhen a dangerous concentration of carbon monoxide is detected, the sensor sounds an audible alarm of ≥85 dB. This volume is a guarantee that you won't miss the danger, even while you sleep. So you can be sure that you and the rest of the household are safe.Easy installation and convenient useThe X-Sense XC01-R sensor has been designed for easy installation, with screws and mounting studs included, allowing you to quickly mount the device in the right place. With the test/silence button, you can easily check the sensor's operation or temporarily mute the signal, which is useful in case of false alarms or CO levels falling below the alarm threshold.10-year service life and replaceable batteryThe XC01-R provides a service life of 10 years, eliminating the need for frequent sensor replacement. The R version has a replaceable CR123A battery, which offers flexibility and the ability to use it for longer periods of time, as battery replacement is quick and easy.Included X-Sense XC01-R CO sensor x1 Mounting screws x2 Expansion bolts x2 User manual x1 Manufacturer X-Sense Model XC01-R Power supply CR123A or CR2/3A (replaceable battery) Product lifetime 10 years Sensor type Electrochemical Safety standard EN 50291-1:2018 Operating temperature 4.4-37.8°C (40-100°F) Operating humidity 10%-85% RH (non-condensing) Alarm sound level ≥ 85 dB at 3 m (10 ft) Storage conditions -20-60°C, 5%-95% RH (non-condensing) Silencing time Approximately 9 minutes