Carbon Monoxide Sensor

Carbon monoxide (CO) detector, Wi-Fi  Features:  Standalone carbon monoxide (CO) detector instantly detects harmful substances released into the environment and triggers an alarm. Electrochemical carbon monoxide sensor detects CO gas that is colorless, non-irritating, odorless. CO is released when something is burned. Various items in your home such as unvented kerosene and gas space heaters, leaking chimneys and furnaces, and gas stoves also release CO and can affect air quality indoors. Breathing air with a high concentration of CO reduces the amount of oxygen that can be transported in the blood stream to critical organs like the heart and brain. That can lead to dizziness, loss of consciousness, and even death. When carbon monoxide is detected this detector triggers an acoustic alarm (70 decibels) and a flashing light alarm. If the CO concentration reaches 190PPM, the detection time is less than 30 seconds. LCD display and 3-color LED indicators shows the amount of CO and the device status. With the test function, you can test whether your device is operating normally every week. Mute function: if the alarm is falsely reported, you can silence it for a period of time. The device will resume monitoring after the silent interval. The device requires three AAA batteries, purchased separately.  Technical specification:  Sensor type: electrochemical. Power supply: 3x 1.5V AA type batteries (not included). Standby current:

Meross CS11-EU smoke and carbon monoxide detectorMeross CS11-EU is a compact yet highly effective sensor equipped with two independent sensors - photoelectric for smoke detection and electrochemical for CO monitoring. Such a solution guarantees a quick response to an emergency! At the same time, the device is small and unobtrusive, and its built-in CR123A battery provides a long operating time - up to about 10 years.Immediate response to dangerThe sensor meets EN14604 and EN50291 standards, which confirms its effectiveness and quality of operation. The device responds automatically when CO levels reach dangerous values - for example, at a concentration of 300 ppm the alarm sounds in less than 3 minutes. A loud signal of more than 85 dB guarantees that the device will be heard even by sleeping household members.Reliability and precisionIf the sensor detects both smoke and carbon monoxide, it will first beep for smoke and then for CO. What's more, the device detects both fast and slow-burning fires, minimizing false alarms.Simple installation without cablesThe detector is powered by a built-in 3V CR123A battery with a lifespan of up to 10 years. This, combined with its clever design, makes its installation take no more than a few minutes and does not require the help of an electrician. All you have to do is screw the mounting bracket to the ceiling or wall, then place the device in it - and you're done!Intuitive light signalingMeross CS11-EU is equipped with a three-color LED that clearly communicates the status of the device. A green light indicates readiness for operation, an amber light indicates a low battery or fault, and a red light indicates alarm activation or test mode. Operation of the sensor is extremely simple - just press one button to perform a test or silence the alarm.Thoughtful design and discretionThe slim, white housing with a round shape makes the sensor blend in perfectly with any interior. Thanks to its compact size, it is unobtrusive while effectively protecting you and your loved ones from an invisible threat.Included Smoke and carbon monoxide detector Mounting bracket Set of screws User manual Manufacturer Meross Model CS11-EU Certifications EN14604:2005/AC:2008, EN50291-1:2018 Sensor type Smoke: photoelectric; CO: electrochemical; Power supply CR123A DC 3 V lithium battery (1600 mAh, non-replaceable) Operating current

X-Sense XC0C-MR Link+ carbon monoxide detectorX-Sense XC0C-MR Link+ is a carbon monoxide sensor designed to work in the X-Sense Link+ connected alarm system. When it detects a threat, it triggers a local alarm, transmits the signal to other sensors in the network, and sends notifications to the app.Connected alarm systemThe XC0C-MR operates as part of an interconnected system, in which the alarm of one sensor automatically triggers other devices on the network. Communication is done wirelessly over a long distance, allowing multiple rooms to be covered simultaneously. The system requires the use of the X-Sense SBS50 base station (available for sale separately).Control in the appOnce connected to the base station, the sensor works with a mobile app that allows you to view alarm status, receive instant notifications and manage the device from a single location. The app also allows you to share the system with other household members, so everyone receives alerts at the same time.Two-level alertingThe sensor supports two warning levels - a preventive alert and a full CO alert. When the carbon monoxide concentration is elevated, but still short-lived, the system sends a warning. If CO levels persist longer, a full audible alarm is triggered, as well as a signal to other devices on the network.Precise CO measurement.The high-performance electrochemical CO sensor provides stable and accurate measurement of carbon monoxide concentration. The device complies with EN 50291-1, which means that the alarm response depends on the CO level and how long it persists.Easy-to-read screen and event memoryThe backlit LCD display shows the current CO concentration in ppm and warning messages. The sensor also saves an alarm memory, allowing you to check later for events that were automatically terminated when the CO level dropped.Loud local alarmIn the event of an emergency, the sensor triggers an audible alarm with a volume of at least 85 dB, clearly audible even from neighboring rooms. Thanks to the Link+ connection, the alarm signal spreads simultaneously throughout the house.Simple operation and silencingThe Test/Silence button allows you to test the system's operation and temporarily mute the alarm. After a specified period of time, the sensor automatically returns to standby mode, remaining fully ready for further operation.Flexible mountingThe unit can be placed on a flat surface or mounted on a wall using the included mounting hardware. The simple form and compact dimensions allow the sensor to easily fit into any room.Long-lasting useThe expected maximum life of the device is up to 10 years, and the replaceable lithium battery provides up to 5 years of operation with standard use. A signaling system informs you of low battery, malfunction or end of life.Included: Carbon monoxide detector CR123A 3 V battery (installed) Mounting screw x2 Expansion bolt x2 Supporting label for hole spacing User manual Manufacturer X-Sense Model XC0C-MR Power supply 1 × CR123A 3 V lithium battery (replaceable) Battery life Up to 5 years (test once a week) Maximum device life 10 years Sensor type electrochemical Safety standards EN 50291-1 CO alarm response time. 50 ppm: 60-90 minutes100 ppm: 10-40 minutes300 ppm: < 3 minutes Operating temperature 4.4 to 37.8°C Operating humidity 10 to 85% RH (non-condensing) Alarm volume ≥ 85 dB (from a distance of 3 m) Alarm silencing time ≤ 9 minutes Operating band 869.25-869.3 MHz Maximum RF power 10 mW Maximum number of devices in Link+ network 24 wireless alarms (Link+ / Link+ Pro) Maximum number of devices per base station Up to 50 alarms Transmission range more than 500 m in open space Weight 146 g Dimensions 142 × 75 × 32 mm

X-Sense CO03D carbon monoxide detectorThe X-Sense CO03D provides the highest level of protection against the silent killer that is carbon monoxide. Using Figaro's advanced electrochemical sensor, the device monitors CO concentrations from 30 to 999 ppm, alerting you to the danger at an early stage. The high-precision sensor not only detects even minimal concentrations, but also provides continuous monitoring, allowing quick response to potential danger.Warning function and LCD displayThe device has a clear LCD display that shows the CO level in the room in real time, so you always know what situation you are in. The color LED indicators (green, yellow, red) provide information about the operating status, low battery level and alarm mode. What's more, with its clear light and sound signals (≥ 85 dB), the sensor provides instant warning that you won't miss even while you sleep. This is especially important because carbon monoxide is odorless and colorless, and effective detection can save the lives of you and your loved ones.Power supply and replaceable batteriesThe X-Sense CO03D detector is powered by three replaceable AA alkaline batteries for easy maintenance and replacement without having to buy a new unit. A low-battery warning feature ensures you'll never miss the moment to replace them, guaranteeing consistent sensor performance for years to come.Alarms tailored to CO concentration levels.The X-Sense CO03D responds to different levels of carbon monoxide concentration at different times, which minimizes the risk of false alarms, but at the same time ensures that a real threat is signaled quickly enough. For a concentration of 30 ppm, the alarm will sound after 120 minutes, at 50 ppm after 60-90 minutes, while for a concentration of 300 ppm it will sound in just 3 minutes. This means that the device is sensitive enough to warn of danger long before critical levels are reached.Test and mute functionThe CO03D has a test and mute function, giving you full control of the device. The test can be performed regularly to make sure the sensor is working properly. The mute function, on the other hand, allows you to temporarily turn off the alarm, which can be helpful in case of a false alarm or when the CO level falls below a dangerous threshold.Safety certifications and stylish designThe device meets the stringent EN 50291 and UL 2034 safety standards, confirming its reliability and compliance with international standards. It has also been approved by BSI and CE, guaranteeing the highest quality workmanship. With its compact and modern design, the sensor will fit perfectly into any interior without disturbing its aesthetics.Included CO sensor x1 Mounting bracket x1 Mounting screws x2 Mounting pins x2 1.5V AA alkaline batteries x3 Instruction manual x1 Manufacturer X-sense Model CO03D Safety standard: EN 50291, UL 2034 Sensor type: Electrochemical (Figaro) Lifespan: 10 years Power supply: 3 × 1.5 V AA alkaline batteries (replaceable) Alarm level: ≥ 85 dB at 1 m Operating temperature range: 4-38°C (40-100°F) Operating humidity: 10%-85% RH (non-condensing) Mute time: Approximately 9 minutes Indicators: Red, green and yellow LEDs Weight 133 g Dimensions: 110 x 110 x 37 mm

MOES S02-CG Carbon Monoxide and Gas DetectorThe MOES S02-CG is an advanced 2-in-1 detector that simultaneously monitors levels of carbon monoxide (CO) and combustible gases, providing comprehensive protection for your home. The device uses dual sensor technology—electrochemical for CO detection and catalytic for gas detection—which translates to high precision and a fast response time of less than 2 seconds. The clear, 2-inch color LCD display shows current CO levels (0–999 ppm), gas levels, as well as temperature and humidity, giving you full control over safety and indoor conditions.Dual detection and fast responseThe use of two independent sensors allows for the simultaneous detection of various hazards, significantly increasing safety. The electrochemical sensor precisely monitors carbon monoxide concentration, while the catalytic combustion sensor detects combustible gases on a four-level scale. Thanks to its fast response time, the device immediately alerts you to danger, minimizing the risk of serious incidents.Easy-to-read display and full control over informationThe built-in 2-inch HD color screen provides convenient access to all key data in real time. It displays CO levels in ppm, current gas levels, temperature, and humidity, as well as status and alarm icons. This allows the user to quickly assess the situation and take appropriate action without the need for additional devices.Four-level visual and audible alarm systemThe sensor uses four warning levels, which are indicated by colors and an audible alarm exceeding 85 dB. Green indicates no danger (CO 0–50 ppm), yellow indicates elevated levels, orange indicates a warning state, and red signals a danger requiring immediate action (up to 999 ppm CO and ≥15% LFL for gas). The varying intensity of the signals allows for quick recognition of the severity of the threat.Intuitive operation and additional featuresThe device is equipped with three buttons for convenient control. The “U” button allows you to perform a device test or change the temperature unit (°C/°F). The brightness button lets you choose one of three backlight levels (100%, 50%, or screen off), and the bell button allows you to mute the alarm or rotate the screen 180°. This lets you customize the detector’s operation to your preferences.Versatile use in various spacesThe S02-CG model is suitable for many locations at risk of carbon monoxide and gas exposure, such as kitchens, garages, rooms with fireplaces, or smoking areas. Thanks to its wide monitoring range and clear warning system, the device effectively enhances safety both at home and in commercial spaces.Included Sensor User manual Plug Manufacturer Moes Model S02-CG Carbon monoxide (CO) 0~999 ppm (±10%) CO alarm threshold (default) 51 ppm Flammable gas GAS levels Lv1–Lv4 (Lv4: 15% LEL) Gas alarm threshold GAS Lv2 ≥ 5% LEL Temperature -10°C ~ 50°C (±1.5°C) / 14°F ~ 122°F (±2.7°F) Humidity 0% ~ 95% RH (±5%) Power supply 100–240 V, 50/60 Hz (replaceable plug) Display 2.0", 320 × 240, IPS Housing ABS plastic (fire-resistant) Operating temperature -10°C ~ 50°C / 14°F ~ 122°F Alarm Yes Product dimensions 105 × 55 × 52 mm (with plug)

Habotest HT609PRO Gas Leak DetectorThe Habotest HT609PRO sensor will provide you with fast and accurate leak detection. Among other things, the device recognizes methane, propane, butane, carbon monoxide, ammonia, acetylene, acetone, benzene, hydrogen, ethanol, kerosene, solvent and many others, allowing you to effectively monitor safety at home, work, workshop or laboratory. It also allows accurate measurement of gas concentration in PPM units. A color LCD display with an intuitive bar graph, a 1.5-meter telescopic probe and a dual alarm system (sound and light) make operation easy.Precise detectionThe device detects all LEL (Lower Explosive Limit) gases, i.e. substances that can become explosive when they exceed a certain concentration in the air. Thanks to its wide detection range (50-1000 PPM) and fast response time (2-5 seconds), the Habotest HT609PRO sensor allows immediate detection of danger.Telescopic probeThanks to its flexible 1.5-meter-long probe, the sensor allows you to check hard-to-reach areas without using a ladder or dismantling the installation. The Habotest HT609PRO is ideal for inspecting gas installations in buildings and LPG systems in vehicles, ensuring convenience and safety of use.Sensitivity adjustmentThe detector offers a three-stage sensitivity adjustment, so you can adapt its performance to your environment. The high sensitivity mode detects already minimal amounts of gas, while the low sensitivity mode eliminates interference in environments with higher gas concentrations. An audible alarm sounds depending on the sensitivity setting - from the second to the eighth bar of the chart.Safety and convenienceThe Habotest HT609PRO warns of gas detection with an audible and light signal. The color LCD screen displays measurements in an easy-to-read graphical form, allowing easy interpretation of the results. A low battery indicator reminds you to replace the battery. You'll power the device with 3 AAA batteries, which are included in the package.Durable designThanks to its compact and ergonomic design, the sensor fits perfectly in your hand. It is made of durable materials to ensure resistance to damage and wear. The automatic shut-off function after 5 minutes of inactivity extends the device's working time.Included: Habotest HT609PRO gas leak detector Protective bag for storage AAA battery x3 User manual Manufacturer Habotest Manufacturer code HT609PRO Range approximately 50 ~ 1000ppm (methane) Sensitivity > 50 PPM (methane) Extendable probe Yes, 1.5m Test gases (partial list) Acetone, acetylene, alcohol, ammonia, benzene, butane, ethanol, oxirane, gasoline, hexane, hydrogen, methane, gasoline, kerosene, natural gas, paint thinners, propane, solvents, etc. Start-up time approximately 30 seconds Response time 500ppm: approx. 2s Alarm mode Audible and light Automatic power off yes Power supply 3 x 1.5V AAA battery Working temperature 0 to 50°C Working humidity 20 to 80% Storage temperature -10 to 60°C Storage humidity 20 to 80%

Habotest HT601A gas leak detectorThe Habotest gas leak detector is characterized by high sensitivity and accuracy. With its help, you will quickly make a measurement, the result of which will be displayed on a clear, color LCD screen. The HT601A also has an audible alarm. The HT601A is handy and durable - it will prove useful in many applications.Fast, accurate, versatileThe device provides a very fast response, and thanks to its extremely sensitive sensor, it can operate with an accuracy of up to ±10 F.S. It detects leaks of several different gases, such as methane, carbon monoxide, hexane and acetylene, among others. So you will use it in many ways. The colorful HD display makes working with the device much easier. You will find there, among other things, the measurement results presented in the form of a bar chart, as well as a low battery indicator.The reliable device you needThe detector is lightweight, compact and fits perfectly in your hand. It is made in such a way that it can serve you perfectly for many years. Durable, hard wearing and not prone to damage - it will surprise you with its reliable performance. It is also easy to transport - you can safely take it with you wherever you need it. It requires 3 AAA 1.5V batteries, which must be purchased separately. Brand Habotest Model HT601A HT601B Range 0-9999PPM/0.00-20.00%LEL 0-9999PPM/0.00-20.00%LEL Detected gases Combustible gas Combustible gas Accuracy Not applicable ≤10% FS (Methane) Sensitivity

X-Sense XC01-M Link+ Pro CO Detector.The X-Sense XC01-M Link+ Pro provides the highest level of protection against the threat of CO poisoning. The device offers reliable performance thanks to its high-precision electrochemical sensor and its ability to wirelessly connect to other alarms on the network. As a result, when one sensor detects a threat, all connected units will be activated, increasing security throughout the home.Precise measurement and memory of the highest CO concentrations.The XC01-M is equipped with a highly sensitive electrochemical sensor that immediately detects the presence of carbon monoxide in the air. An easy-to-read LCD display shows current CO concentrations, and a memory function saves the highest recorded levels, allowing you to monitor pollution levels even in your absence.Network up to 24 connected devicesThe XC01-M sensor can be part of a network of up to 24 (mask.) Link+ Pro devices that work together to enhance security. If one sensor detects a threat, all alarms in the network will be triggered immediately. The system is ideal for larger homes and facilities.Test and control through the appWith the mobile app, you can test the sensor's performance at any time without moving from your location. This feature eliminates the need to use a ladder to manually test the device, which is both convenient and safe. The app will also notify you of low battery or other important events.Powerful alarm with a volume of 85 dBWhen the concentration of carbon monoxide exceeds a safe level, the sensor emits a loud 85 dB alarm. This sound is loud enough to alert all household members, even when they are in another room.Long life and easily replaceable batteriesThe XC01-M offers a lifespan of up to 10 years, which means you'll be able to enjoy protection for a long time without having to replace the device. The device is powered by a replaceable CR123A or CR2/3A battery for long-lasting performance, and low power levels are indicated on the display and through in-app notifications to avoid unexpected interruptions.Included CO sensor (with pre-installed battery) × 1 screws × 2 wall plugs × 2 instruction manual × 1 Manufacturers X-Sense Model XC01-M Link+ Pro Power supply CR123A or CR2/3A (replaceable battery) Product lifetime 10 years Sensor type Electrochemical Safety standard EN 50291-1:2018 Operating temperature 4,4-37,8°C Humidity during operation 10%-85% relative humidity (non-condensing) Alarm volume ≥ 85 dB at 3 m (10 ft) @ 3.2 ± 0.3 kHz pulse alarm Storage and transport conditions -20-60°C (-4-140°F), 5%-95% relative humidity (non-condensing) Silence duration Approximately 9 minutes Operating frequency 868 MHz Maximum number of connected units 24 wireless units (compatible with X-Sense Link+ alarms only)