Carbon Monoxide Sensor

X-Sense CO Sensor CO-3D-W Link+.The X-Sense CO03D-W Link+ is an advanced wireless carbon monoxide sensor that offers the highest level of protection against the dangerous and odorless gas carbon monoxide (CO). With its wireless connectivity feature, this sensor creates a safety network in the home, allowing it to synchronize with other X-Sense Link+ alarms, meaning that when one sensor detects a danger, all other devices on the network immediately sound the alarm. This advanced feature gives you the maximum level of protection and the assurance that everyone in the house will be immediately alerted to a threat, no matter where they are.Wireless network for complete protectionThe CO03D-W detector uses Link+ wireless technology, which allows up to 24 devices to be connected on a single network, making it an ideal choice for large homes or multi-story buildings. When one device detects the presence of carbon monoxide, all other alarms on the network will sound immediately, alerting the entire family to the danger. With this solution, all household members can be sure they are protected, even if they are far from where the danger is detected.Precision Figaro CO SensorInside the X-Sense CO03D-W sensor is a high-end electrochemical sensor from Figaro, which provides reliable and precise detection of carbon monoxide. The sensor responds to different concentrations of CO depending on their level, triggering an alarm faster in the event of a greater threat, allowing for faster rescue efforts. For example, at a concentration of 30 ppm, the alarm will be triggered after 120 minutes, but at a concentration of 300 ppm, after only 3 minutes.LCD display and LED indicationWith an easy-to-read LCD display, you can monitor the level of CO concentration in the room in real time, allowing you to monitor the situation at all times. The tri-color LED indicators - green, yellow and red - provide additional information about the device's status, such as operational readiness, low battery and alarm signal. A high-pitched audible alarm of ≥85 dB at 1 meter ensures that the signal will not be missed, even in noisy environments.Replaceable batteries and low power warningThe sensor is powered by three AA alkaline batteries, which can be easily replaced, allowing for long-term use of the device. A built-in low-battery warning system ensures that you will be notified when the batteries need to be replaced, guaranteeing uninterrupted operation of the sensor.Test and mute functionThe X-Sense CO03D-W is equipped with a test/silence button that allows you to easily test the sensor and mute the alarm when needed. Regular testing of the alarm is key to making sure it is working properly. If a false alarm is detected, the beep can be silenced for up to 9 minutes, eliminating the need to immediately dismantle the unit.Compact design and easy installationThe X-Sense CO03D-W carbon monoxide detector features a modern and compact design, making it fit discreetly into any interior. Its small size (110 x 110 x 37 mm) and lightweight design facilitate installation, which is quick and easy, thanks to the included mounting accessories.Included CO sensor x1 Mounting bracket x1 Mounting screws x2 Mounting pins x2 1.5V AA alkaline batteries x3 Instruction manual x1 Manufacturer X-Sense Model CO03D-W Safety standard: EN 50291-1:2018 Sensor type: Electrochemical (Figaro) Service life: 10 years Power supply: 3 × 1.5 V AA alkaline batteries (replaceable) Alarm level: ≥ 85 dB at 1 m Operating temperature range: 4.4-37.8°C (40-100°F) Operating humidity: ≤ 85% RH (non-condensing) Mute time: ≤ 9 minutes Indicators: Red, green and yellow LEDs Product weight: 133 g Product dimensions: 110 x 110 x 37 mm Maximum number of connected devices: 24 units

X-Sense XC04-WX Carbon Monoxide DetectorThe X-Sense XC04-WX carbon monoxide sensor is your reliable watchdog to keep your home safe around the clock. Equipped with a sensitive electrochemical sensor, it instantly alerts you when elevated levels of carbon monoxide are detected. The ability to connect to the X-Sense Home Security app via Wi-Fi (2.4 GHz) allows you to monitor CO levels in real time, and with the option to share the alarm with loved ones, everyone in the family can have access to home security information no matter where they are.Effective carbon monoxide detectionThe X-Sense XC04-WX monitors CO levels from 30 to 999 ppm and reacts accordingly depending on its concentration. At a concentration of 30 ppm, the alarm will sound after 120 minutes, while at a level of 300 ppm the response time is just 3 minutes. The high sensitivity provides quick warning of danger, and the loud alarm (≥ 85 dB) ensures that the signal will be heard even in large spaces.Intuitive operation and versatile mounting optionsThe sensor can be mounted on a wall or placed on a flat surface, giving it the flexibility to fit into any interior. A bright LCD display along with LEDs (green, yellow and red) informs you of the device's status, allowing you to easily control CO levels, battery status and alarm mode.Up to 10 years of operationWith long-term protection in mind, the XC04-WX sensor features a sensor with a life span of up to 10 years. Powered by a replaceable CR123A battery that lasts up to a year, it provides minimal maintenance. Whether you're at home or away for an extended period of time, you can count on reliable alarm performance for years to come.Full control over securityNo matter where you are, you have full visibility of the situation in your home! With push notifications, the X-Sense XC04-WX will immediately send an alert when carbon monoxide levels exceed safe standards - even before the audible alarm sounds. In addition, the sensor records the highest CO concentration detected, allowing you to analyze potential hazards upon your return.Included: CO sensor (with battery installed) Screws x2 Expansion bolts x2 User manual Manufacturer X-Sense Model XC04-WX Sensor type Electrochemical Safety standard EN 50291-1:2018 Sensor lifetime 10 years Power supply CR123A battery (replaceable) Battery life 1 year Alarm volume ≥ 85 dB at 3 m at a frequency of 3.2 ± 0.3 kHz Operating temperature range From 4 to 38°C Operating humidity 10%-85% (non-condensing) Wi-Fi connectivity 2.4 GHz (IEEE 802.11b/g/n, incompatible with 5 GHz networks) Application features Push notifications (CO alarm, low battery, fault, CO alarm prevention), sharing the device with family members Display LCD with memory for maximum CO level. Response times for CO levels. 30 ppm - more than 120 minutes; 50 ppm - 60-90 minutes; 100 ppm - 10-40 minutes; 300 ppm - 0-3 minutes Dimensions 135 x 63 x 24 mm Weight 88 g

MOES WSS-CO Wi-Fi Carbon Monoxide DetectorThe MOES WSS-CO is a smart carbon monoxide (CO) detector that provides an immediate response to a hazard thanks to a loud 85 dB alarm and notifications in the mobile app. The device connects directly to a 2.4 GHz Wi-Fi network without the need for an additional hub, which significantly simplifies installation. Support for the Tuya Smart and Smart Life apps enables remote monitoring and control, while integration with Amazon Alexa and Google Assistant allows for convenient management of the system within a smart home.Instant notifications and remote controlThe sensor alerts you to carbon monoxide detection not only with an audible alarm but also by sending instant notifications to your smartphone. This allows you to react quickly even when you’re not at home. The remote test feature lets you verify the device’s proper functioning via the app, and voice prompts further enhance the clarity of alerts and ensure safe use.Effective protection in various roomsThe WSS-CO model is ideal for many areas at risk of carbon monoxide exposure, such as boiler rooms, kitchens, bedrooms, hallways, basements, and garages. The sensor helps detect dangerous situations, such as leaks in the system, aging pipes, or gas appliances left on. It is particularly important in enclosed spaces, where carbon monoxide buildup can pose a serious threat to health and life.Integration with the system and additional devicesThe device is equipped with SIG- and SIG+ connectors for connecting a solenoid valve and relay outputs (NC/NO/COM), enabling it to work with additional safety system components. As a result, the sensor can not only alert you to a hazard but also interact with the system to mitigate it. The 100–240V AC power supply ensures compatibility with typical electrical installations.Flexible installation and precise operationThe sensor can be mounted either on the ceiling or near the floor—depending on the characteristics of the gas being detected—while maintaining a distance of approximately 30 cm from the surface. It is also recommended to place the device at an appropriate distance from the gas source, such as a stove. The maximum detection range is up to 4 meters in diameter, allowing for effective monitoring of the selected room and rapid detection of hazards. Manufacturer Moes Model WSS-CO Operating voltage 110–230 V AC, 50 Hz Average power consumption