Computer Power Supply

Modern Bluetooth audio transmitter wireless sound transmissionA compact Bluetooth audio transmitter is an easy way to upgrade classic audio equipment wirelessly. It allows you to stream audio from your phone, tablet or laptop directly to devices equipped with AUX or RCA inputs. The Bluetooth 6.0 technology ensures a stable connection, low latency and high sound quality, both when listening to music and making calls. The device is powered directly via the USB port. Simply connect it to the USB port on your radio, computer or mains charger to enjoy uninterrupted operation and everyday convenience.Instant connection, full sound controlPairing devices is quick and intuitive simply bring a compatible smartphone close to automatically establish a Bluetooth connection. Support for popular audio profiles ensures clear stereo sound and convenient playback control, while a transmission range of up to 10 metres allows for comfortable use at home, in the office or in the car, without the need for cables. Powered by an external USB power supply can operate continuously without draining your phone's battery, ideal for home and stationary use (e.g. Hi-Fi system, receiver, active speakers).An excellent choice for older audio equipment Wireless music playback on your home audio system, Bluetooth 6.0 stable and efficient audio transmission, Integration of older audio equipment with newer devices the perfect solution for upgrading classic Hi-Fi systems without having to replace them, 2×RCA and AUX (3.5mm) outputs wide compatibility, Hands-free calling support, Transmission range up to 10 m (in open space), Plug&Play no need to install drivers or software, Compact format ideal for work and travel, does not take up much space and is easy to install even in hard-to-reach spaces. Versatile use home, office and carIdeal for applications such as: Connecting a smartphone to a receiver or amplifier, Upgrading older Hi-Fi systems without replacing equipment, Wireless music playback in your living room or office, Use in car audio systems, Streaming music, podcasts and audiobooks, As a car hands-free kit. Forget about drivers, enjoy full Plug&Play compatibilityConnect the receiver to the USB port and the 3.5 mm jack socket on the radio. Then turn on Bluetooth on your phone, select the "BT1160" device and connect. Once paired, the receiver will connect automatically just switch the radio to AUX mode. Thanks to Plug & Play technology, the adapter is ready to use immediately after connecting to the appropriate ports - no additional drivers or software installation required. Its compact size means it does not take up much space and is easy to install even in hard-to-reach spaces. It is a proven solution for both home and car use.

Convenient USB power supply - allows you to connect the lamp to a computer, powerbank or standard phone charger The use of colorful LED wires - thanks to which the colors are more intense and the neon has a decorative function, even when it is not on Convenient switch and brightness regulator 2-meter long power cable Neon mounted on a plexiglass base LED technology for energy efficiency

Convenient USB power supply - allows you to connect the light to a computer, power bank or standard phone charger Can be powered by 3 AA batteries Bright and vivid colors Convenient switch 2 meters long power cable Stylish and modern decoration of any interior LED technology ensures energy efficiency

Convenient USB Type-C power supply - allows you to connect the lamp to a computer, powerbank or standard phone charger Possibility of battery power: 3xAA (batteries not included) Striking illusion of 3D effect 16 light colors and several light modes Remote control 2 meter power cord Stylish stand with touch button, LED technology for energy efficiency

Convenient USB power supply – allows you to connect the lamp to a computer, power bank or standard phone charger Using colorful LED wires – thanks to them, the colors are more intense, and the neon performs a decorative function even when it is not turned on Convenient switch and brightness control 2-meter power cord Neon is mounted on a plexiglass base LED technology for energy efficiency Type Neon lamps Light strip length (m) - Smart function No Remote control No Power (W) 5 Voltage (V) 5 Mounting type Hanging loops IP class - Material Base made of organic glass Color Multicolor Dimensions (cm) 20x29x2 Weight (kg) 0.35

Sonoff Zigbee LCD Smart Temperature Humidity Sensor SONOFF smart home system allows you to control your electrical appliances remotely with the EWeLink app or by voice with Amazon Alexa or Google Home. It allows you to create different scenarios, group appliances by switching on/off multiple devices with a single touch, set timers and schedules, monitor the status of your devices in real time, and share their control. Thanks to configurable local LAN support Sonoff smart home system can work without a cloud server. **Features:** Built-in Swiss-made sensor ensures accurate measurement of room temperature and humidity. The smart device can detect and display real-time temperature and humidity readings on a large LCD screen and report them to the EWeLink app. Connection and configuration are supported directly via the smart app (via Android or iOS smart devices). Temperature switching °C / °F. The device allows you to monitor living conditions in the app, store and export historical data. You’ll receive instant alerts from your phone when the temperature or humidity exceeds your set comfort level. Suitable for environmental monitoring in residential areas, factories, computer rooms, shopping malls, hotels, offices, educational buildings, banks, libraries, as well as warehouses and many other places. Supports Zigbee gateways that use Zigbee3.0 protocol, compatible with most third-party hubs: such as Amazon Echo Plus 2nd Gen, Echo 4th Gen, Echo Show 2nd Gen. Can be combined with various other products for smart home scenarios. Note: CR2450 battery is not included, it should be purchased separately. **Technical data:** Screen size: 2.8 inches. Compatibility: Sonoff NSPanel Pro, Zigbee Bridge, Zigbee Bridge Pro, ZBDongle-P, ZBDongle-E, iHost. Wireless protocol: Zigbee 3.0 (IEEE802.15.4). Temperature measurement accuracy: +/-0.2°C. Humidity measurement accuracy: +/-2RH. Operating temperature: -9.9°C~ +60°C. Power supply: CR2450 battery 3V (not included). Battery life: 2 years. App: eWeLink (Android, iOS). Integrated PCB antenna. Encryption standard: AES-128. Wireless network distance: up to 120 m. Body materials: PC+LCD. Dimensions: 62.5x59.5x18.5 mm. Color: white. Weight: 69g. Installation: fixed to the wall with 3M/ magnet/ placed on the table surface. Certificates: CE/ FCC/ ISED/ RoHS. **Warranty:** 24 months.   

Sonoff Zigbee LCD Smart Temperature Humidity Sensor SONOFF smart home system allows you to control your electrical appliances remotely with the EWeLink app or by voice with Amazon Alexa or Google Home. It allows you to create different scenarios, group appliances by switching on/off multiple devices with a single touch, set timers and schedules, monitor the status of your devices in real time, and share their control. Thanks to configurable local LAN support Sonoff smart home system can work without a cloud server. **Features:** Built-in Swiss-made sensor ensures accurate measurement of room temperature and humidity. The smart device can detect and display real-time temperature and humidity readings on a large LCD screen and report them to the EWeLink app. Connection and configuration are supported directly via the smart app (via Android or iOS smart devices). Temperature switching °C / °F. The device allows you to monitor living conditions in the app, store and export historical data. You’ll receive instant alerts from your phone when the temperature or humidity exceeds your set comfort level. Suitable for environmental monitoring in residential areas, factories, computer rooms, shopping malls, hotels, offices, educational buildings, banks, libraries, as well as warehouses and many other places. Supports Zigbee gateways that use Zigbee3.0 protocol, compatible with most third-party hubs: such as Amazon Echo Plus 2nd Gen, Echo 4th Gen, Echo Show 2nd Gen. Can be combined with various other products for smart home scenarios. Note: CR2450 battery is not included, it should be purchased separately. **Technical data:** Screen size: 2.8 inches. Compatibility: Sonoff NSPanel Pro, Zigbee Bridge, Zigbee Bridge Pro, ZBDongle-P, ZBDongle-E, iHost. Wireless protocol: Zigbee 3.0 (IEEE802.15.4). Temperature measurement accuracy: +/-0.2°C. Humidity measurement accuracy: +/-2RH. Operating temperature: -9.9°C~ +60°C. Power supply: CR2450 battery 3V (not included). Battery life: 2 years. App: eWeLink (Android, iOS). Integrated PCB antenna. Encryption standard: AES-128. Wireless network distance: up to 120 m. Body materials: PC+LCD. Dimensions: 62.5x59.5x18.5 mm. Color: white. Weight: 69g. Installation: fixed to the wall with 3M/ magnet/ placed on the table surface. Certificates: CE/ FCC/ ISED/ RoHS. **Warranty:** 24 months.   

Convenient USB power supply - allows you to connect the lamp to a computer, powerbank or standard phone charger Bright and vivid colors Convenient switch 2-meter long power cord Stylish and modern decoration of any interior LED technology ensures energy efficiency

Convenient USB power supply - allows you to connect the lamp to a computer, powerbank or standard phone charger Bright and vivid colors Convenient switch 2-meter long power cord Stylish and modern decoration of any interior LED technology ensures energy efficiency

Convenient USB Power Supply allows you to connect the lamp to a computer, power bank, or standard phone charger. Control is available via Wireless Remote Control or In-Line Switch. Offers a Variety of Lighting Effects, Brightness Adjustment, and Light Change Mode that reacts to the Beat of the Music. Features 16 Colors and a 2-Meter Power Cord. Uses LED Technology to ensure Energy Efficiency.

Convenient USB power supply - allows you to connect the lamp to a computer, powerbank or standard phone charger The use of colorful LED wires - thanks to which the colors are more intense and the neon has a decorative function, even when it is not on Convenient switch and brightness regulator 2-meter long power cable Neon mounted on a plexiglass base LED technology for energy efficiency

USB Type-C connection cable, type C to C M / M, 1.0m, Gen2, 5A, 10GB, Version 3.1, CEOne cable for data transmission, charging and video / audio transmission.For connecting external USB devices (with C socket, eg computer, tablet or smartphone) to a USB host (eg computer, notebook). USB 3.1 Data transfer rate up to 10 Gbps, Superspeed +, 5A power supply, Supports USB PD specification (Power Delivery). video / audio up to 4K (4096 x 2304, 30 Hz)

Compact AXAGON ADSA-FP2A SLIM adapter with USB-A 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-A cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer.  The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-A 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type A male connector. Device support:  SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD, max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 20 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-A - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

IB-273StU3External enclosure for 2.5" SATA HDD/SSD drives with a USB 3.0 interface in a stylish design.FUNCTIONS- Stylish, blue circle in LED technology informs about access to the hard drive and power supply- External data interface: 1x USB 3.0- Compatible backwards with USB 2.0 and 1.1- Transfer speed: USB 3.0 to 5 Gbit/s- Supported operating systems: Windows, Mac and Linux- Hard disk height up to 9.5 mm, no hard disk capacity limit- Plug & Play and Hot Swap- Included with a high quality caseSmall blackIB-273StU3 has a space for 2.5" disk in SATA technology of any size.The device works with desktop computers, laptops, multimedia players, telephones or televisions.The only thing that is required is a USB connection, preferably using the fastest interface, i.e. USB version 3.0. Data transmission up to 5 Gbit/s using the USB 3.0 interface.The casing is made of hard plastic that provides very good protective properties and aluminum, which perfectly dissipates heat. IB-273StU3 has a compact size, making it an ideal companion on the go. The set includes a high-quality housing case that protects against possible scratches arising in transport. The housing IB-273StU3 will work in all conditions.A perfect combination of materialsThe plastic reduces the weight and the aluminum perfectly dissipates heat, so your HDD/SSD can last longer without using a fan. Replacing the hard disk is extremely simple, just remove the cover and replace the disk.Comfortable on the goLightweight material IB-273StU3 makes it ideal for travel. To protect your drive against dust and scratches, a high-quality protective case is included in the set. With the USB 3.0 interface, data transmission is up to 5 Gbit / s. That's why working with large files, watching movies or photos is fast and convenient! The housing is backwards compatible with USB 2.0 and even 1.1.Hot stuffFast disk replacement during operation (HotSwap) and Plug & Play support allow the user to easily use multiple hard drives in the enclosure.

Convenient USB power supply - allows you to connect the lamp to a computer, power bank, or standard phone charger Convenient switch Remote control 2-meter power cable Neon light mounted on an MDF base RGB color changing Multiple lighting effects Eye-catching ambient lighting LED technology ensures energy efficiency

The slim aluminium USB-C 5Gbps AXAGON HUE-STC ALU STRIP hub easily and quickly connects up to four USB devices simultaneously to a laptop, computer, or phone. You connect your laptop to the hub via a 12 cm long USB-C cable. The USB hub offers four USB outputs  one USB-A 5Gbps, ideal for fast connection of external drives or flash drives. Two standard USB-A 480Mbps outputs are sufficient for reliable connection of a mouse, keyboard, or printer. The fourth USB-C 480Mbps data connector allows the connection of most mobile phones and other devices with a common transfer rate. The slim aluminum body not only looks great, but also provides mechanical durability and passive cooling. The USB-C hub is an ideal accessory for laptops with a limited number of USB-A connectors, allowing you to continue using your existing peripherals without need to purchase new ones. Plug & Play and Hot Plug features ensure easy connection without complicated installation and allow convenient connecting and disconnecting of devices while the computer is running. The hub can also handle permanent connection of several external drives. The hub can easily handle connection to phones and tablets with a USB-C connector. For example, you can connect a flash drive, external drive, keyboard, or mouse to your phone. Input (connection to computer, tablet or phone): USB 5Gbps (USB 3.2 Gen 1), connector USB-C male. Compatible with USB 480Mbps, USB 10Gbps, USB 20Gbps, USB 40Gbps, Thunderbolt 3/4/5. USB outputs: 1× USB 5Gbps port, USB-A female connector. 2× USB 480Mbps port, USB-A female connector. 1× USB 480Mbps port, USB-C female connector. USB-C hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) from the hub's USB-A and USB-C ports. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. Power supply via USB bus - USB bus power. The high-quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions: 88 × 17 × 9 mm (W × D × H). Weight: 22 g (incl. cable). USB-C cable 12 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10/11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: USB-C hub with fixed 12 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.

The slim aluminium USB-C 5Gbps AXAGON HUE-STA ALU STRIP hub easily and quickly connects up to four USB devices simultaneously to a laptop or computer. You connect your laptop to the hub via a 12 cm long USB-A cable. The USB hub offers four USB outputs  one USB-A 5Gbps, ideal for fast connection of external drives or flash drives. Two standard USB-A 480Mbps outputs are sufficient for reliable connection of a mouse, keyboard, or printer. The fourth USB-C 480Mbps data connector allows the connection of most mobile phones and other devices with a common transfer rate. The slim aluminum body not only looks great, but also provides mechanical durability and passive cooling. The USB-A hub is an ideal accessory for laptops with a limited number of USB-A connectors, allowing you to continue using your existing peripherals without needing to purchase new ones. Plug & Play and Hot Plug features ensure easy connection without complicated installation and allow convenient connecting and disconnecting of devices while the computer is running. The hub can also handle permanent connection of several external drives. Input (connection to computer or tablet): USB 5Gbps (USB 3.2 Gen 1), connector USB-A male. Compatible with USB 480Mbps, USB 10Gbps, USB 20Gbps, USB 40Gbps, Thunderbolt 3/4/5. USB outputs: 1× USB 5Gbps port, USB-A female connector. 2× USB 480Mbps port, USB-A female connector. 1× USB 480Mbps port, USB-C female connector. USB-A hub can handle the connection of several external drives at the same time. Charging of mobile devices (including iPad) from the hub's USB-A and USB-C ports. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. Power supply via USB bus - USB bus power. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions: 88 × 17 × 9 mm (W × D × H). Weight: 25 g (incl. cable). USB-A cable 12 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10/11, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: USB-A hub with fixed 12 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG / BOS / CN / ARA, packed in a cardboard box with a hanging hole.