Computer Power Supply

Convenient USB power supply - allows you to connect the lamp to a computer, powerbank or standard phone charger The use of colorful LED wires - thanks to which the colors are more intense and the neon has a decorative function, even when it is not on Convenient switch and brightness regulator 2-meter long power cable Neon mounted on a plexiglass base LED technology ensures energy efficiency

With the Sandberg USB-C to Lightning Cable you can achieve faster charging of your iPhone or iPad with Lightning connector directly from a computer or power supply with USB-C.

Convenient USB power supply - allows you to connect the lamp to a computer, powerbank or standard phone charger The use of colored LED wires - thanks to which the colors are more intense and the neon has a decorative function, even when it is not on Convenient on/off switch and brightness control 2 meter power cord Neon on a plexiglass base LED technology for energy efficiency

Convenient USB power supply - allows you to connect the lamp to a computer, powerbank or standard phone charger The use of colorful LED wires - thanks to which the colors are more intense and the neon has a decorative function, even when it is not on Convenient switch and brightness regulator 2-meter long power cable Neon mounted on a plexiglass base LED technology for energy efficiency

The Sandberg USB-A Hub 1xUSB3.0+3x2.0 SAVER allows connection of up to 4 USB devices to your computer. Thus you can for example connect an external hard disk, a printer and a mouse simultaneously. Connect it to a USB port and it will work immediately, without the need to install drivers. Features Data transfer rate: 5000 Mbit/s Housing material: Aluminium Colour of product: Grey Ports & interfaces Ports quantity: 4 Host interface: USB 3.2 Gen 1 (3.1 Gen 1) Type-A Hub interfaces: USB 2.0, USB 3.2 Gen 1 (3.1 Gen 1) Type-A USB 2.0 ports quantity: 3 USB 3.0 (3.1 Gen 1) Type-A ports quantity: 1 Power Power supply type: USB System requirements Windows operating systems supported: Windows 10,Windows 7,Windows 8,Windows Vista,Windows XP Mac operating systems supported: Y Packaging data Package width: 120 mm Package depth: 20 mm Package height: 140 mm Package weight: 80 g Quantity per pack: 1 pc(s)

Unitek Y-3089 is a 4-port USB 3.0 hub. which can be connected to a computer in order to increase the availability of USB ports.Elegant and extremely small HUB plastic housing will become an ornament to any desk in the home and in the workplace.Powered directly from the USB connector supports charging technology BC1.2, which intelligently gets along appropriate voltage, remember to disconnect the power supply after charging the battery, and takes care of many other aspects that affect the life of the batteries loaded.

IB-241WPExternal enclosure for 2.5" SATA discs made of aluminum with data blockingFUNCTIONS- USB 3.0 5 Gbit/s host interface- Compact housing made of aluminum- SATA III 6 Gbps and USB 3.0 UASP support- LED display informs about power supply and access to the hard disk- Hard disk with a height of up to 9.5 mm, no restriction on disk capacity- Supports: PC and Mac- Plug & Play and Hot Swap- Connector: USB 3.0 micro-B on the body and USB 3.0 type A for the computer- Write protection switch - against data loss/virus infectionPrevents data loss and manipulation!The write-protect switch on the back of the case is a new feature that prevents accidental data erasure. Works in a similar way to the write-protect switch on an SD card. After activating data protection, data can be copied and read, but they can not be saved, deleted or modified on the disk in the housing. Only when data protection is disabled, files can be modified or copied to disk. Our files are protected against interference by third parties, as well as against accidental deletion of data or viruses.A quiet partnerThanks to the construction without a fan, the casing works in total silence. Made of aluminum provides excellent heat dissipation to the outside of the housing. Thanks to this IB-256WP is a silent partner of everyday work. The silicone frame protects the casing against accidental damage or scratches.Excellent protectionThe second line of defense is write protection. It can be turned on using the switch, thanks to which the data is protected against accidental editing, deletion and even viruses.A great combinationThe housing is equipped with a USB 3.0 interface, thanks to which it works with the majority of PCs and laptops. It can transfer data at a transfer rate of up to 5 Gbit/s and power the enclosure.

Compact AXAGON ADSA-FP2C SLIM adapter with USB-C 5Gbps and SATA 6G interface for 2.5" SATA hard drives or SSDs. The connection to the computer enables a permanently attached USB-C cable 20 cm long. Thanks to the USB 3.2 Gen 1 interface, the transfer rate is up to 5 Gb/s, and the Plug & Play function ensures automatic connection to the computer.  The adapter also supports all important functions for working seamlessly with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the adapter, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port. The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc. Input: USB-C 5Gbps (USB 3.2 Gen 1 / USB 3.0). Speed up to 5 Gbit/s. Connection via USB type C male connector. Device support: SATA III - 6Gb/s (600 MB/s) interface, Supports 2.5" SSD/HDD,  max. disk capacity - all without limit. Other features: Compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Backward compatible with USB 480Mbps (USB 2.0). Supports transmission rates 5.000 / 480 Mbit/s. Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The total bandwidth / transmission rate of the adapter is determined by the USB interface (theor. 5 Gbit/s). Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI Protocol). Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. Supports booting from SSD/HDD connected via an USB adapter. HDD Auto Spindown - automatic spindown of a disk after period of inactivity lasting 10 minutes. HDD Turn Off - turns off the disk after removing the device or spinning down the PC. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Connection via USB-C male connector on 20 cm long cable permanently connected to the adapter. Supplying the power via bus up to 900mA from one USB port is sufficient in all cases. Decently bright LED indicating the connection of USB power supply (permanent light) and data transmission (blinking). Adapter dimensions 70 x 26 x 10 mm. Adapter weight only 18 g incl. USB cable. Supported OS: Windows 7 / 8.1 / 10 / 11 a and later, Windows Server 2008 R2 / 2012 R2 / 2016 / 2019 / 2022 and later, Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher. Package contains: USB-C - SATA adapter with permanently connected 20 cm long cable, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

USB 3.0 Slim PASS 4 passive Win / MAC portsThe i-tec USB 3.0 HUB is a perfect addition for anyone who has an insufficient number of USB ports on their notebooks, ultrabooks or PCs, and is constantly forced to connect and disconnect their favorite USB devices such as flash drives, mobile phones, tablets, Digital cameras, MP3 players, printers, etc. HUB has 4 USB 3.0 ports with Plug & Play capability and USB charging - HUB automatically detects USB devices that need charging. USB 3.0 ports are especially important for optimal data transfer from USB 3.0 and flash memory, most of which allow for high transfer rates. The LED indicates read and write status.HUB is powered by USB and does not require driver installation.Simply connect the USB cable to your device and computer and start working immediately. The HUB has built-in overvoltage protection in the event of a short circuit on peripheral devices. The device is compatible with USB 2.0. The HUB is supplied without a power supply that is not required for use with most devices.Compact dimensions and light weight make the HUB a perfect accessory for people who use their laptop on the go.

Convenient USB power supply - allows you to connect the lamp to a computer, powerbank or standard phone charger The use of colorful LED wires - thanks to which the colors are more intense and the neon has a decorative function, even when it is not on Convenient switch and brightness regulator 2-meter long power cable Neon mounted on a plexiglass base LED technology for energy efficiency

Convenient USB power supply - allows you to connect the light to a computer, power bank or standard phone charger Use of colored LED cables - thanks to which the colors are more intense and the neon has a decorative function, even when it is not turned on Convenient switch and brightness regulator 2 meters long power cable Neon mounted on a plexiglass base LED technology ensures energy efficiency

USB 2.0 to RS232 (DB9) converter / adapter with a USB A M / Ż cable 80cm long The DIGITUS USB 2.0 serial adapter is a practical solution for serial connections. The serial RS232 interface is no longer available on newer computer equipment, and the DIGITUS USB 2.0 converter enables data exchange between the USB 2.0 port of the computer and peripheral devices with a serial interface (COM port, RS232), such as weather stations, sensors, control systems machines, STB decoder, game consoles, PDAs, scanners, modems, ISDN adapters and many other peripherals. The USB 2.0 adapter is downward compatible with USB 1.1 and allows you to adjust the transmission speed between 75 bits and 128,000 bits per second. Thanks to the individually configurable FTDI chipset, compatibility with all standard operating systems is ensured, as well as power-management and remote-wake-up. Power is supplied via the USB port, no need for a separate power supply.

Convenient USB power supply – allows you to connect the lamp to a computer, power bank or standard phone charger Using colorful LED wires – thanks to them, the colors are more intense, and the neon performs a decorative function even when it is not turned on Convenient switch and brightness control 2-meter power cord Neon is mounted on a plexiglass base LED technology for energy efficiency Type Neon lamps Light strip length (m) - Smart function No Remote control No Power (W) 5 Voltage (V) 5 Mounting type Freestanding, hanging IP class - Material Base made of organic glass Color Multicolor Dimensions (cm) 35.4x28.2x2 Weight (kg) 0.4

USB 3.0 Metal 4-port passive USB HUB, 4x USB 3.0 porti-tec USB 3.0 HUB is the perfect companion for everyone who does not have enough USB ports in their notebook, ultrabook or PC, and for those who have to constantly disconnect and connect their favorite devices, such as a USB flash drive, tablet , digital camera, MP3 player, printer, etc.This HUB offers 4 USB 3.0 ports with Plug & Play function and standard USB charging - HUB will automatically detect connected USB charging devices.The USB 3.0 interface is mainly important when transferring data from USB 3.0 memory cards and flash drives that use the highest transfer speed. The LED indicates the read and write status of the data. HUB is powered from the USB bus and does not require installation of drivers. Just connect it with a USB-C cable and it's ready to use right away. It has built-in overcurrent protection to protect your computer in case of a short circuit in connected peripheral devices. The interface is compatible with USB 2.0, works without a power supply, which is not required for most equipment, and thanks to its small size and light weight, you can take it with you wherever you like.

Universal - compatible with many devices such as flash drives, card readers, printers, mice, keyboards, external hard drives, etc.High performance thanks to data transmission (5Gbps) allows you to transfer files from external storage much faster.One HUB, many possibilities - effectively solves the problem of too few ports. Instead of one, after connecting a device, you'll have access to four - USB 3.0.Compact size - its small size and weight of 28g allow you to always have it with you.Ring LED - a subtle white backlight informs you of proper operation.Plug&Play - automatic operation after connecting to a computer or phone.Supports up to 4 devices simultaneously.Compatible - with Windows, Mac OS, and Linux.USB-C port - allows you to connect an external power supply (max 5V/3A).

Convenient USB Power Supply allows you to connect the lamp to a computer, power bank, or standard phone charger. The use of Colored LED Wires ensures more intense colors and gives the neon a decorative function even when it is off. Features a Convenient On/Off Switch and Brightness Control. Comes with a 2-Meter Power Cord. Neon is mounted on a Plexiglass Base. Uses LED Technology for Energy Efficiency.

Convenient USB power supply - allows you to connect the light to a computer, power bank or standard phone charger Use of colored LED cables - thanks to which the colors are more intense and the neon has a decorative function, even when it is not turned on Convenient switch and brightness regulator 2 meters long power cable Neon mounted on a plexiglass base LED technology ensures energy efficiency

Miniature metal USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-M1AL with 1.2 m long USB cable fast and easy connects up to four USB devices to computer. The metal hub body is made of aluminum and provides perfect mechanical protection. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 120 cm long USB cable is suitable for use with a desktop computer. This compact hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc.  Input:   1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 120 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s).  USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 60 g (incl. cable). USB cable length 120 cm. Power / Charging:  USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports.  The USB hub can also handle the permanent connection of several external drives simultaneously.  Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Miniature metal USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-M1A fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input:   1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector.     Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 35 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Miniature metal USB-C 3.2 Gen 1 hub AXAGON HUE-M1C fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones USB-C connector. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input:   1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector.     Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Compatible with Thunderbolt 3 interface. Connecting USB type C male connector on a fixed 20 cm long cable. Output: 4x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 70 x 24 x 18 mm. Weight 33 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: SuperSpeed USB-C hub with fixed 20 cm long USB cable, printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.