Filaments PLA 2.85

Sunlu S1 Plus Filament DryerThe SUNLU Filadryer S1 Plus is an indispensable tool for any 3D printer user who wants to achieve perfect prints without compromise. The device effectively removes moisture from filaments, preventing issues such as stringing, nozzle clogging, poor adhesion, and layer shifting. With the ability to dry filament during printing, it ensures stable operating conditions and significantly improves the quality of your models. Adjustable temperature (35–55°C), operating time settings up to 24 hours, quiet operation (

Sunlu S2 Filament DryerThe SUNLU Filadryer S2 is a state-of-the-art filament dryer that effectively removes moisture and restores the materials’ optimal properties, resulting in significantly better 3D print quality. Thanks to an advanced 360° heating system, a large touchscreen, and the ability to dry and print simultaneously, the device ensures maximum convenience and efficiency. It supports a wide range of materials—from PLA and PETG to more demanding filaments like PA or PC—and its intuitive operation and quiet operation make it ideal for both home workshops and professional environments.Dry filament, perfect print – no more problems, once and for allMoisture is the enemy of every 3D print. The SUNLU S2 effectively removes it from filaments, eliminating issues such as stringing, nozzle clogging, poor adhesion, and layer shifting. The result? Smooth surfaces, strong layer bonds, and greater model precision. You save material, time, and stress—every print has a better chance of succeeding on the first try.Intuitive tablet-style operation—everything under control with a single touchA large, color touchscreen (4.6") offers a whole new level of user convenience. You can easily set the temperature, drying time, filament type, and even switch between °C and °F. The quick-select feature for recommended settings means you don’t have to guess—the device suggests the best parameters for a specific material, so you achieve optimal results without experimentation.360° Even Drying – Maximum Effectiveness in Every SituationAn advanced 360° circulation and heating system ensures even moisture removal from the entire filament spool. Regardless of the material type or moisture level, the filament is thoroughly prepared for printing. This solution significantly improves print quality and allows you to fully utilize your printer’s potential.Versatility and convenience – one device for all filamentsThe SUNLU S2 works with most filaments available on the market and supports all standard diameters: 1.75 mm, 2.85 mm, and 3.00 mm. The ability to dry the filament while printing ensures it remains in perfect condition throughout the entire process. Quiet operation (below 10 dB) and a well-thought-out design make this device an indispensable tool for anyone who wants to print better, faster, and without unnecessary complications.Included: SUNLU S2 Filament Dryer Power adapter User manual Manufacturer Sunlu Model Fila Dryer S2 Drying temperature range 45–70°C Temperature range for materials PLA/PLA+/WOOD: 45–50°CPETG/PVB/ABS/ABS+/HIPS/PVA/ASA/TPU/PMMA: 50–55°CPA/PC: 60–70°C Recommended drying time 3–6 h Heating system 360° circulating heating Display Touchscreen LCD Controls Touch panel, one-click settings Supported filament diameters 1.75 mm / 2.85 mm / 3.00 mm Material compatibility PLA, PLA+, PETG, TPU, ABS, PA, PC, and others Operating function Drying during printing Noise level

Sunlu SP2 filament dryerThe Sunlu SP2 is a modular 2-in-1 filament dryer that combines effective drying with airtight storage for 3D printing materials. The design consists of a heating base and a storage container, allowing the device to be used flexibly depending on your needs. The containers themselves can be stacked on top of each other to better utilize your workspace. This is a practical solution for those who want to improve filament storage conditions while simplifying daily material handling.Drying and storage in a single systemThe SP2 model is designed so that the drying process does not need to be separated from storage. The efficient heating base removes moisture, while the airtight container helps keep the filament in optimal condition even after drying is complete. The top and bottom silicone lids provide excellent sealing and thermal insulation. In storage mode, the device can maintain an internal humidity level of approximately 25% at an average ambient humidity of about 50%.Airtight design and humidity controlThe device is equipped with a carrying handle and a recess in the bottom, making it easy to move and position comfortably. A built-in hygrometer allows for real-time monitoring of internal humidity, while three cable ports on each side enable better adaptation to various printing configurations. The modular design simplifies workspace organization, and the ability to stack containers helps save space in both small workshops and larger studios.Large capacity and wide compatibilityThe Sunlu SP2 supports spools weighing from 0.25 kg to 3 kg and works with filaments of 1.75 mm and 2.85 mm diameter. The chamber can hold two 1 kg spools, one 2 kg spool, or one 3 kg spool, with a maximum spool size of 250 mm in diameter and 153 mm in width. After attaching the guide roller, it is also possible to use a paper spool, and the spool holder allows for the stable mounting of damaged spools as well.Adjustable temperature and improved printing performanceThe SP2 operates within a temperature range of 35°C to 70°C, making it compatible with most popular filaments, such as PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, and PA/PC. Removing moisture from the material helps minimize printing issues such as stringing, nozzle clogging, and poor layer adhesion. The manufacturer provides recommended drying settings for various materials, making it easy to select the appropriate parameters for each filament type.Safe and refined operationThe SP2 model utilizes a 200 W PTC heater supported by a fan, an additional overheat protection switch, and intelligent temperature control via software. This triple safety design enhances the reliability of the heating process and allows for greater peace of mind when using the device. The maximum operating power is 250 W, and power consumption in standby mode does not exceed 1 W, making it highly efficient for everyday use.Included Heating base Storage container Hygrometer Desiccant Desiccant container Power cord Reel Air valves PTFE tubes User manual Specifications Manufacturer Sunlu Model SP2 Product dimensions 278 × 208 × 396 mm Internal dimensions 265 × 193 × 274 mm Net weight 3.6 kg Gross weight 4.1 kg Operating conditions 10°C–35°C Operating relative humidity ≤95% Compatible filament diameters 1.75 mm, 2.85 mm Maximum spool size 250 × 153 mm Supported spool weight 0.25–3 kg Example spool configuration 2 × 1 kg, 1 × 2 kg, 1 × 3 kg Operating temperature range 35°C–70°C Supported materials PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, PA/PC Humidity display range 10%–90% Operating time range 0–99 h Power supply AC 110V / 220V Maximum operating power 250 W Standby power ≤1 W PTC heating power 200 W Hygrometer Yes Stackable Yes Recommended maximum layers 3 Silicone seal Yes

Sunlu S4 Filament DryerThe SUNLU FilaDryer S4 is an advanced filament dryer designed for demanding 3D printing users. It offers a massive capacity—drying up to 4 spools (1 kg each) simultaneously—and the ability to work with multiple printers at once. With a power output of 320–330 W, rapid heating (up to 50°C in just 30 minutes), and a maximum temperature of 70°C, the device ensures effective and uniform drying of even the most demanding materials, such as PA or PC. The built-in humidity control system, touchscreen, 8 filament outputs, and predefined material profiles make using the device not only effective but also extremely convenient.Dry up to 4 filaments simultaneously – maximum productivityThanks to the large chamber (450 × 210 × 211 mm), you can dry up to four spools of filament at the same time. This is the perfect solution for multicolor printing or working with multiple printers simultaneously. You don’t waste time changing materials—everything is ready in one place, which significantly speeds up and streamlines the entire process.Instant heating and high power – efficiency that makes a differencePerformance is ensured by a PTC heater with a power of up to 330 W, which allows it to reach 50°C in about 30 minutes and a maximum of 70°C. This means shorter filament preparation time and greater drying efficiency. Even difficult, hygroscopic materials regain their properties faster than ever before.Ideal temperature balance – perfect drying for every spoolA three-fan system (on the sides and bottom) ensures even air circulation and temperature stability within ±3°C. This ensures that every section of the filament is dried evenly, resulting in better print quality, greater consistency, and no surprises during operation.Smart humidity control – filament always in perfect conditionAn advanced humidity control system automatically starts drying when the humidity level exceeds the set range (30–50%) and stops the process once optimal conditions are reached (approx. 25%). This means full automation and the assurance that the filament is always ready for use—without manual monitoring.Safety and ease of use – technology you can rely onThe SUNLU S4 is equipped with a triple safety system: a PTC heater, a temperature sensor, and software protection. The device monitors temperature in real time and alerts you to any abnormalities, ensuring safe operation. Additionally, the touchscreen and pre-set profiles for PLA, ABS, PETG, TPU, PA, and PC simplify operation and eliminate the guesswork involved in settings.Full compatibility and flexibility – tailor the equipment to your needsSupport for filaments with diameters of 1.75 mm, 2.85 mm, and 3.00 mm, along with compatibility with most 3D printers, ensures the SUNLU S4 performs well in any environment. Eight filament outputs and the ability to connect multiple printers simultaneously allow for flexible workstation configuration. This device truly expands your capabilities and lets you create without limits.Included: SUNLU S4 Filament Dryer Power cord PTFE tubes User manual Manufacturer Sunlu Model Fila Dryer S4 Rated power 320–330 W Power supply AC 100–240 V / 50–60 Hz Maximum temperature 70°C Heating time to 50°C approx. 30 minutes Capacity 4 spools (1 kg each) Internal dimensions 450 × 210 × 211 mm Device dimensions 516 × 278 × 350 mm Net weight 4.8 kg Gross weight 5.5 kg Heating system PTC + 3 fans Temperature stability ±3°C Humidity control Automatic (start 30–50%, stop approx. 25%) Supported materials PLA, ABS, PETG, TPU, PA, PC Supported filament diameters 1.75 mm / 2.85 mm / 3.00 mm Number of filament outlets 8 (can be used with PTFE tubes) Display Touchscreen LCD

Sunlu E2 Filament DryerThe SUNLU FilaDryer E2 is a groundbreaking 2-in-1 device designed for the most demanding 3D printing users—it combines drying and annealing functions, offering full control over material properties. With a power output of 500W, rapid heating (50°C in 20 minutes, 70°C in 30 minutes), and a maximum temperature of 110°C, the E2 not only dries the filament but also significantly improves its mechanical properties. Its sealed design, large chamber accommodating spools up to 3 kg, and intelligent safety features make it a professional tool for working with both engineering and standard materials.Drying and annealing in one—maximum quality for your printsThe SUNLU E2 not only removes moisture from filaments but also allows for their annealing, a process that significantly increases the impact resistance, strength, and stability of your models. This solution will be particularly appreciated by those working with engineering materials—your prints become stronger, more durable, and ready for the most demanding applications.Up to 110°C – full power for engineering materialsThanks to its high operating temperature, the device supports as much as 99.99% of filaments available on the market, including advanced materials such as PA, PC, ASA, and composites with carbon and glass fibers. This means you can work without limitations—whether you’re creating mechanical parts, drone components, or parts requiring high durability.Instant heating – time savings and greater efficiencyA powerful 500W PTC heater ensures the device heats up extremely quickly. You don’t waste time waiting – the filament is ready to use almost immediately. This is particularly important for intensive projects and production work, where every minute counts.Fully sealed and insulated – filament always dry and readyAn advanced sealing system with silicone components effectively blocks moisture from entering from the outside. Additionally, the dual-chamber design provides excellent thermal insulation, allowing for a stable temperature to be maintained even above 100°C. The result? Ideal conditions for both drying and annealing—without the risk of re-moisturization.Large workspace – more possibilities in a single deviceThe chamber, sized to accommodate large spools (up to Ø250 mm), allows for various configurations—from two 1 kg spools, through 2 kg, up to a single 3 kg spool. This is a huge convenience for those working on larger projects or using industrial filaments.Smart safety features – safety without compromiseThe SUNLU E2 is equipped with a multi-level protection system: temperature control, automatic shutdown in case of overheating, and warning alarms. Additionally, double insulation ensures that even at internal temperatures above 100°C, the housing remains safe to touch. This is equipment you can rely on.Unlimited compatibility – one device for everythingSupport for 1.75 mm and 2.85 mm filament diameters and compatibility with a wide range of materials—from PLA to advanced composites—mean the E2 fits into any workspace. Built-in material profiles and simple operation let you quickly select optimal settings and focus on what matters most—creating.Annealing that makes a difference – unlock the potential of your materialsThe annealing process reduces internal stresses created during printing and significantly improves the mechanical properties of your models. With the SUNLU E2, your prints gain a new level of quality—greater strength, stability, and durability—opening the door to professional and industrial applications.Included: SUNLU E2 Filament Dryer PTFE tubes Annealing tray Power cord High-temperature resistant gloves User manual Manufacturer Sunlu Model Fila Dryer E2 Maximum operating temperature 110°C Power 500 W Power supply AC 100–240 V / 50–60 Hz Heating time to 50°C approx. 20 minutes Heating time to 70°C approx. 30 minutes Supported filament diameters 1.75 mm / 2.85 mm Maximum spool size Ø250 × 153 mm Capacity 2 × 1 kg / 2 × 2 kg / 1 ×