PLA Spool

ELEGOO PLA+ Filament (orange)ELEGOO filament in orange is a great option for those looking for intense, well-saturated colors. The material has a smooth surface and provides high print detail, which works well for both prototypes and decorations. It is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.Durability and precisionWith increased resistance to cracking and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.Convenience and compatibilityThe material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament. General Manufacturer ELEGOO Model 50.203.0073 Color Orange Weight 1 kg Recommended print settings Drying settings before printing 55 ± 5°C Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) Nozzle temperature 200 - 230°C Table temperature (depending on printer and surface) 35 - 65°C Type of working surface Textured PEI (polyetherimide - a durable material that holds prints well) or other compatible plates Printing speed Less than 280 mm/sec Physical properties Density 1.30 g/cm³ Melting point 161°C Deflection temperature under load 56°C Softening temperature (Vicat test) 63°C Mechanical properties Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 2 MPa Elongation at break (XY) 7,9% ± 1,6% Bending strength (XY) 74 ± 4 MPa Bending modulus (XY) 2979 ± 156 MPa Impact strength (XY) 65.5 ± 3.6 kJ/m²

PLA+ ELEGOO Filament (star gray)ELEGOO filament in the shade of star gray is a versatile solution that will work well in both technical prints and decorative projects. The neutral, matte color ensures legibility of details and matches modern aesthetics. The product is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.Durability and precisionWith increased resistance to cracking and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.Convenience and compatibilityThe material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament. General Manufacturer ELEGOO Model 50.203.0163 Color Star gray Weight 1 kg Recommended print settings Drying settings before printing 55 ± 5°C Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) Nozzle temperature 200 - 230°C Table temperature (depending on printer and surface) 35 - 65°C Type of working surface Textured PEI (polyetherimide - a durable material that holds prints well) or other compatible plates Printing speed Less than 280 mm/sec Physical properties Density 1.30 g/cm³ Melting point 161°C Deflection temperature under load 56°C Softening temperature (Vicat test) 63°C Mechanical properties Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 2 MPa Elongation at break (XY) 7,9% ± 1,6% Bending strength (XY) 74 ± 4 MPa Bending modulus (XY) 2979 ± 156 MPa Impact strength (XY) 65.5 ± 3.6 kJ/m²

Rapid PLA+ ELEGOO Filament (gray)Rapid PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability) ELEGOO in gray variant is a filament designed for fast, technical prints. The subdued color masks minor imperfections and allows you to focus on the shape of the model. The material works well in utility projects, prototypes and structural elements where precision and repeatability are important. The spool holds 1 kg of plastic.Performance at high speedsThe filament melts quickly and flows smoothly out of the nozzle, allowing you to print at speeds of up to 600 mm/s (with a properly adjusted printer). Rapid PLA+ has better flexibility and crack resistance compared to standard PLA, making prints less brittle and more durable. In addition, it conducts heat well, which promotes layer bonding.Accuracy and convenienceA diameter of 1.75 mm and a dimensional tolerance of ± 0.02 mm ensure even feeding of the material and reduce the risk of nozzle clogging. The plastic is wound by machine and then checked by hand, reducing entanglements. The recycled cardboard spool makes segregation easy, and the whole thing is vacuum-packed with a moisture absorber - so the material is ready for printing as soon as it is opened. General Manufacturer ELEGOO Model 50.203.0116 Color Gray Weight 1 kg Recommended print settings Drying before printing 55 ± 5°C Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) Nozzle temperature 200 - 230°C Table temperature (depending on printer and surface) 35 - 65°C Type of working surface Textured PEI (polyetherimide - a durable material that holds prints well) or other compatible plates Printing speed Less than 600 mm/sec Physical properties Density 1.23 g/cm³ Melting point 160°C Deflection temperature under load 57°C Softening temperature (Vicat test) 62°C Mechanical properties Tensile strength (XY - measured in the horizontal plane of the print, where the material is strongest) 39 ± 2 MPa Elongation at break (XY) 8,5% ± 1,2% Bending strength (XY) 71 ± 6 MPa Bending modulus (XY) 2846 ± 175 MPa Impact strength (XY) 50.4 ± 2.8 kJ/m²

ELEGOO PLA+ Filament (blue)ELEGOO filament in blue is a good choice if you want a light, clean shade that looks good on larger surfaces and in details. The material has a uniform color and smooth texture, so prints look aesthetically pleasing and are well reproduced. It is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.Durability and precisionWith increased resistance to breakage and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.Convenience and compatibilityThe material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament. General Manufacturer ELEGOO Model 50.203.0161 Color Blue Weight 1 kg Recommended print settings Drying settings before printing 55 ± 5°C Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) Nozzle temperature 200 - 230°C Table temperature (depending on printer and surface) 35 - 65°C Type of working surface Textured PEI (polyetherimide - a durable material that holds prints well) or other compatible plates Printing speed Less than 280 mm/sec Physical properties Density 1.30 g/cm³ Melting point 161°C Deflection temperature under load 56°C Softening temperature (Vicat test) 63°C Mechanical properties Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 2 MPa Elongation at break (XY) 7,9% ± 1,6% Bending strength (XY) 74 ± 4 MPa Bending modulus (XY) 2979 ± 156 MPa Impact strength (XY) 65.5 ± 3.6 kJ/m²