PLA Spool

PLA Marble Filament by ELEGOOMarble-colored filament from ELEGOO allows you to create unique models with a realistic stone finish. Thanks to additives that give the surface the characteristic marble effect, the prints gain an aesthetic that is ideal for decorations, figurines or architectural mock-ups. The material is based on PLA (polylactide - a plant-based biodegradable plastic), so it is environmentally friendly. There is 1 kg of filament on the spool, which is enough for many medium and large prints.Stable and clean printingThe product has a diameter of 1.75 mm and a very precise dimensional tolerance (± 0.02 mm), which ensures even feeding into the printer without jams. It adheres well to the work table and does not create bubbles or excessive threads (known as stringing), which minimizes material waste and saves time. The result is smooth, durable models with a uniform appearance.Practical and eco-friendly spoolsFilament spools are made of cardboard, making it easy to recycle and reducing the product's environmental impact. In addition, each spool is precisely wound by machine and controlled by hand to prevent tangling. Three holes in the spool make it easy to see how much material is left. General Manufacturer ELEGOO Model 50.203.0113 Color Marble Weight 1 kg Recommended print settings Drying settings before printing 55 ± 5°C Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) Nozzle temperature 190 - 230°C Table temperature (depending on printer and surface) 35 - 65°C Type of working surface Textured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surface Printing speed Less than 300 mm/s Physical properties Density 1.26 g/cm³ Melting point 158°C Deflection temperature under load 57°C Softening temperature (Vicat test) 62°C Mechanical properties Tensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 3 MPa Elongation at break (XY) 10,5% ± 2,1% Bending strength (XY) 72 ± 5 MPa Bending modulus (XY) 2993 ± 182 MPa Impact strength (XY) 66.2 ± 3.9 kJ/m²

PLA Bronze Filament from ELEGOOBronze-colored filament from ELEGOO with a subtle metallic sheen allows you to create models that look elegant and stylish. This effect works great for figures, props, costume details and decorations where visual depth and a classic finish are important. The material is based on PLA (polylactide - a plant-based biodegradable plastic), so it is environmentally friendly. There is 1 kg of filament on the spool, which is enough for many medium and large prints.Stable and clean printingThe product has a diameter of 1.75 mm and a very precise dimensional tolerance (± 0.02 mm), which ensures even feeding into the printer without jamming. It adheres well to the work table and does not create bubbles or excessive threads (known as stringing), which minimizes material waste and saves time. The result is smooth, durable models with a uniform appearance.Practical and eco-friendly spoolsFilament spools are made of cardboard, making it easy to recycle and reducing the product's environmental impact. In addition, each spool is precisely wound by machine and controlled by hand to prevent tangling. Three holes in the spool make it easy to see how much material is left. General Manufacturer ELEGOO Model 50.203.0465 Color Brown Weight 1 kg Recommended print settings Drying settings before printing 55 ± 5°C Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) Nozzle temperature 190 - 230°C Table temperature (depending on printer and surface) 35 - 65°C Type of working surface Textured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surface Printing speed Less than 300 mm/s Physical properties Density 1.26 g/cm³ Melting point 158°C Deflection temperature under load 57°C Softening temperature (Vicat test) 62°C Mechanical properties Tensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 3 MPa Elongation at break (XY) 10,5% ± 2,1% Bending strength (XY) 72 ± 5 MPa Bending modulus (XY) 2993 ± 182 MPa Impact strength (XY) 66.2 ± 3.9 kJ/m²

Sunlu PLA Glow-in-the-Dark Filament (White-Green)The Sunlu PLA Glow-in-the-Dark filament in white and green is an excellent choice for those who want to give their 3D prints a unique, eye-catching look. The material contains phosphorescent components that allow it to glow in the dark after absorbing light energy, creating a striking glow. The intensity of the effect is even greater after exposure to UV light, making this filament ideal for creating decorations, gadgets, decorative models, or elements that stand out after dark. However, keep in mind that this type of material should not be exposed to direct sunlight for long periods, as this may accelerate color fading.Precision you can rely onSunlu has ensured high manufacturing precision for the filament, so the material provides stable and predictable performance during printing. A diameter of 1.75 mm and dimensional accuracy of ±0.03 mm result in even filament feed and greater print consistency. This is particularly important for projects requiring an aesthetic finish and high repeatability. The 1 kg spool allows for convenient printing of both smaller models and more complex projects without the need for frequent material changes.Ready to useThe filament has been designed with your convenience and smooth printer operation in mind. Before packaging, it is dried for 24 hours and then placed in vacuum-sealed packaging with a desiccant inside a resealable nylon bag. This protection helps keep the material in optimal condition and reduces the risk of printing issues. As a result, Sunlu PLA Glow In The Dark supports clog-free and bubble-free printing, allowing you to focus fully on creating rather than troubleshooting technical issues.Wide CompatibilitySunlu PLA Glow In The Dark works with all popular FDM 3D printers that support 1.75 mm filament, so you can easily adapt it to your equipment. High manufacturing standards and a tight diameter tolerance ensure the material works seamlessly with many devices, delivering stable and satisfying results. This is the perfect choice for users seeking an eye-catching glow-in-the-dark material, as well as quality, reliability, and ease of use at every stage of printing. Manufacturer Sunlu Model PLA Glow W-G Color White-green Filament diameter 1.75/3.0 mm Tolerance ±0.02 mm Printing temperature 200–210°C Bed temperature No heating: apply adhesive / Heating 50–65°C: do not apply adhesive Tensile strength (kgf) 11–16 (factory standard at 23°C, wire diameter 1.75 mm) Melting rate 7–9 g/10 min (190°C, 2.16 kg) (according to GB/T 3682.1-2018) Elongation at break 4% (in-house standard at 23°C, wire diameter 1.75 mm) Melting temperature 165–180°C Heat deflection temperature 55°C Density g/cm³ 1.24 Water absorption 0.5% Recommended printing speed 50–100 mm/s Bubbles 100% bubble-free Weight 1 kg/roll Length 1.75 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) 3.0 mm (1 kg) = 110 m

Sunlu PLA Glow-in-the-Dark Filament (White-Blue)Sunlu PLA Glow-in-the-Dark Filament is an excellent choice for anyone looking to give their 3D prints a unique, eye-catching look. The material contains phosphorescent components that allow it to glow in the dark after absorbing light, creating a striking glow. The intensity of the effect is even greater after exposure to UV light, making this filament ideal for creating decorations, gadgets, decorative models, or elements that stand out after dark. However, keep in mind that this type of material should not be exposed to direct sunlight for long periods, as this can accelerate color fading.Precision You Can Rely OnSunlu has ensured high manufacturing precision for this filament, so the material delivers stable and predictable performance during printing. A diameter of 1.75 mm and dimensional accuracy of ±0.03 mm result in even filament feed and greater print consistency. This is particularly important for projects requiring an aesthetic finish and high repeatability. The 1 kg spool allows for convenient printing of both smaller models and more complex projects without the need for frequent material changes.Ready to useThe filament has been designed with your convenience and smooth printer operation in mind. Before packaging, it is dried for 24 hours and then placed in vacuum-sealed packaging with a desiccant inside a resealable nylon bag. This protection helps keep the material in optimal condition and reduces the risk of printing issues. As a result, Sunlu PLA Glow In The Dark supports clog-free and bubble-free printing, allowing you to focus fully on creating rather than troubleshooting technical issues.Wide CompatibilitySunlu PLA Glow In The Dark works with all popular FDM 3D printers that support 1.75 mm filament, so you can easily adapt it to your equipment. High manufacturing standards and tight diameter tolerances ensure the material works seamlessly with many devices, delivering stable and satisfying results. This is the perfect choice for users seeking a striking glow-in-the-dark material, as well as quality, reliability, and ease of use at every stage of printing. Manufacturer Sunlu Model PLA Glow W-Blu Color White-blue Filament diameter 1.75/3.0 mm Tolerance ±0.02 mm Printing temperature 200–210°C Bed temperature No heating: cover with adhesive / Heating 50–65°C: do not cover with adhesive Tensile strength (kgf) 11–16 (factory standard at 23°C, wire diameter 1.75 mm) Melting index 7–9 g/10 min (190°C, 2.16 kg) (according to GB/T 3682.1-2018) Elongation at break 4% (in-house standard at 23°C, wire diameter 1.75 mm) Melting temperature 165–180°C Heat deflection temperature 55°C Density g/cm³ 1.24 Water absorption 0.5% Recommended printing speed 50–100 mm/s Bubbles 100% bubble-free Weight 1 kg/roll Length 1.75 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) 3.0 mm (1 kg) = 110 m

Sunlu PLA Glow-in-the-Dark Filament (Blue)Sunlu PLA Glow-in-the-Dark Filament is an excellent choice for anyone looking to give their 3D prints a unique, eye-catching look. The material contains phosphorescent compounds that allow it to glow in the dark after absorbing light, creating a striking glow. The intensity of the effect is even greater after exposure to UV light, making this filament ideal for creating decorations, gadgets, decorative models, or elements that stand out after dark. However, keep in mind that this type of material should not be exposed to direct sunlight for long periods, as this can accelerate color fading.Precision You Can Rely OnSunlu has ensured high manufacturing precision for this filament, so the material delivers stable and predictable performance during printing. A diameter of 1.75 mm and dimensional accuracy of ±0.03 mm result in even filament feed and greater print consistency. This is particularly important for projects requiring an aesthetic finish and high repeatability. The 1 kg spool allows for convenient printing of both smaller models and more complex projects without the need for frequent material changes.Ready to useThe filament has been designed with your convenience and smooth printer operation in mind. Before packaging, it is dried for 24 hours and then placed in vacuum-sealed packaging with a desiccant inside a resealable nylon bag. This protection helps keep the material in optimal condition and reduces the risk of printing issues. As a result, Sunlu PLA Glow In The Dark supports clog-free and bubble-free printing, allowing you to focus fully on creating rather than troubleshooting technical issues.Wide CompatibilitySunlu PLA Glow In The Dark works with all popular FDM 3D printers that support 1.75 mm filament, so you can easily adapt it to your equipment. High manufacturing standards and tight diameter tolerances ensure the material works seamlessly with many devices, delivering stable and satisfying results. This is the perfect choice for users seeking an eye-catching glow-in-the-dark material, as well as quality, reliability, and ease of use at every stage of printing. Manufacturer Sunlu Model PLA Glow TB Color Blue Filament Diameter 1.75/3.0 mm Tolerance ±0.02 mm Printing Temperature 200–210°C Bed Temperature No heating: apply adhesive / Heating 50–65°C: do not apply adhesive Tensile Strength KGF 11–16 (factory standard at 23°C, wire diameter 1.75 mm) Melting rate 7–9 g/10 min (190°C, 2.16 kg) (according to GB/T 3682.1-2018) Elongation at break 4% (in-house standard at 23°C, wire diameter 1.75 mm) Melting temperature 165–180°C Heat deflection temperature 55°C Density g/cm³ 1.24 Water absorption 0.5% Recommended printing speed 50–100 mm/s Bubbles 100% bubble-free Weight 1 kg/roll Length 1.75 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) 3.0 mm (1 kg) = 110 m