PLA Spool

Sunlu PLA Glow-in-the-Dark Filament (White-Green)The Sunlu PLA Glow-in-the-Dark filament in white and green is an excellent choice for those who want to give their 3D prints a unique, eye-catching look. The material contains phosphorescent components that allow it to glow in the dark after absorbing light energy, creating a striking glow. The intensity of the effect is even greater after exposure to UV light, making this filament ideal for creating decorations, gadgets, decorative models, or elements that stand out after dark. However, keep in mind that this type of material should not be exposed to direct sunlight for long periods, as this may accelerate color fading.Precision you can rely onSunlu has ensured high manufacturing precision for the filament, so the material provides stable and predictable performance during printing. A diameter of 1.75 mm and dimensional accuracy of ±0.03 mm result in even filament feed and greater print consistency. This is particularly important for projects requiring an aesthetic finish and high repeatability. The 1 kg spool allows for convenient printing of both smaller models and more complex projects without the need for frequent material changes.Ready to useThe filament has been designed with your convenience and smooth printer operation in mind. Before packaging, it is dried for 24 hours and then placed in vacuum-sealed packaging with a desiccant inside a resealable nylon bag. This protection helps keep the material in optimal condition and reduces the risk of printing issues. As a result, Sunlu PLA Glow In The Dark supports clog-free and bubble-free printing, allowing you to focus fully on creating rather than troubleshooting technical issues.Wide CompatibilitySunlu PLA Glow In The Dark works with all popular FDM 3D printers that support 1.75 mm filament, so you can easily adapt it to your equipment. High manufacturing standards and a tight diameter tolerance ensure the material works seamlessly with many devices, delivering stable and satisfying results. This is the perfect choice for users seeking an eye-catching glow-in-the-dark material, as well as quality, reliability, and ease of use at every stage of printing. Manufacturer Sunlu Model PLA Glow W-G Color White-green Filament diameter 1.75/3.0 mm Tolerance ±0.02 mm Printing temperature 200–210°C Bed temperature No heating: apply adhesive / Heating 50–65°C: do not apply adhesive Tensile strength (kgf) 11–16 (factory standard at 23°C, wire diameter 1.75 mm) Melting rate 7–9 g/10 min (190°C, 2.16 kg) (according to GB/T 3682.1-2018) Elongation at break 4% (in-house standard at 23°C, wire diameter 1.75 mm) Melting temperature 165–180°C Heat deflection temperature 55°C Density g/cm³ 1.24 Water absorption 0.5% Recommended printing speed 50–100 mm/s Bubbles 100% bubble-free Weight 1 kg/roll Length 1.75 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) 3.0 mm (1 kg) = 110 m

Sunlu PLA Glow-in-the-Dark Filament (Blue)Sunlu PLA Glow-in-the-Dark Filament is an excellent choice for anyone looking to give their 3D prints a unique, eye-catching look. The material contains phosphorescent compounds that allow it to glow in the dark after absorbing light, creating a striking glow. The intensity of the effect is even greater after exposure to UV light, making this filament ideal for creating decorations, gadgets, decorative models, or elements that stand out after dark. However, keep in mind that this type of material should not be exposed to direct sunlight for long periods, as this can accelerate color fading.Precision You Can Rely OnSunlu has ensured high manufacturing precision for this filament, so the material delivers stable and predictable performance during printing. A diameter of 1.75 mm and dimensional accuracy of ±0.03 mm result in even filament feed and greater print consistency. This is particularly important for projects requiring an aesthetic finish and high repeatability. The 1 kg spool allows for convenient printing of both smaller models and more complex projects without the need for frequent material changes.Ready to useThe filament has been designed with your convenience and smooth printer operation in mind. Before packaging, it is dried for 24 hours and then placed in vacuum-sealed packaging with a desiccant inside a resealable nylon bag. This protection helps keep the material in optimal condition and reduces the risk of printing issues. As a result, Sunlu PLA Glow In The Dark supports clog-free and bubble-free printing, allowing you to focus fully on creating rather than troubleshooting technical issues.Wide CompatibilitySunlu PLA Glow In The Dark works with all popular FDM 3D printers that support 1.75 mm filament, so you can easily adapt it to your equipment. High manufacturing standards and tight diameter tolerances ensure the material works seamlessly with many devices, delivering stable and satisfying results. This is the perfect choice for users seeking an eye-catching glow-in-the-dark material, as well as quality, reliability, and ease of use at every stage of printing. Manufacturer Sunlu Model PLA Glow TB Color Blue Filament Diameter 1.75/3.0 mm Tolerance ±0.02 mm Printing Temperature 200–210°C Bed Temperature No heating: apply adhesive / Heating 50–65°C: do not apply adhesive Tensile Strength KGF 11–16 (factory standard at 23°C, wire diameter 1.75 mm) Melting rate 7–9 g/10 min (190°C, 2.16 kg) (according to GB/T 3682.1-2018) Elongation at break 4% (in-house standard at 23°C, wire diameter 1.75 mm) Melting temperature 165–180°C Heat deflection temperature 55°C Density g/cm³ 1.24 Water absorption 0.5% Recommended printing speed 50–100 mm/s Bubbles 100% bubble-free Weight 1 kg/roll Length 1.75 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) 3.0 mm (1 kg) = 110 m

PLA Bronze Filament from ELEGOOBronze-colored filament from ELEGOO with a subtle metallic sheen allows you to create models that look elegant and stylish. This effect works great for figures, props, costume details and decorations where visual depth and a classic finish are important. The material is based on PLA (polylactide - a plant-based biodegradable plastic), so it is environmentally friendly. There is 1 kg of filament on the spool, which is enough for many medium and large prints.Stable and clean printingThe product has a diameter of 1.75 mm and a very precise dimensional tolerance (± 0.02 mm), which ensures even feeding into the printer without jamming. It adheres well to the work table and does not create bubbles or excessive threads (known as stringing), which minimizes material waste and saves time. The result is smooth, durable models with a uniform appearance.Practical and eco-friendly spoolsFilament spools are made of cardboard, making it easy to recycle and reducing the product's environmental impact. In addition, each spool is precisely wound by machine and controlled by hand to prevent tangling. Three holes in the spool make it easy to see how much material is left. General Manufacturer ELEGOO Model 50.203.0465 Color Brown Weight 1 kg Recommended print settings Drying settings before printing 55 ± 5°C Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) Nozzle temperature 190 - 230°C Table temperature (depending on printer and surface) 35 - 65°C Type of working surface Textured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surface Printing speed Less than 300 mm/s Physical properties Density 1.26 g/cm³ Melting point 158°C Deflection temperature under load 57°C Softening temperature (Vicat test) 62°C Mechanical properties Tensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 3 MPa Elongation at break (XY) 10,5% ± 2,1% Bending strength (XY) 72 ± 5 MPa Bending modulus (XY) 2993 ± 182 MPa Impact strength (XY) 66.2 ± 3.9 kJ/m²

ANYCUBIC IPHPFFW-101 PLA-CF Filament 1 kg (White)ANYCUBIC PLA-CF IPHPFFW-101 is a carbon fiber-reinforced filament that combines the aesthetic appeal of multicolored prints with high mechanical strength. The addition of carbon fiber reduces layer visibility, resulting in a more uniform surface and a better visual effect for models such as mechanical structures or vehicles. The matte finish gives prints a professional look without the need for additional post-processing, saving time and simplifying the creation process.Greater stiffness and dimensional stabilityThe material was designed for increased strength and resistance to deformation compared to standard PLA Matte. The material’s stiffness of 3100 MPa confirms its durability, making it suitable for more demanding applications. Low material shrinkage minimizes the risk of deformation, resulting in high dimensional accuracy and excellent print quality, particularly in parts requiring precise fit.Easy printing and smart solutionsThe filament is easy to use and compatible with desktop printers, offering a smooth printing process and minimal risk of nozzle clogging (use of a hardened steel nozzle is recommended). A built-in chip enables smart material identification in the Anycubic ACE Pro system, allowing for automatic adjustment of print settings (requires an internet connection and compatible devices). This solution simplifies the workflow and reduces the need for manual configuration.Practical design and eco-friendly approachThe filament comes with a reusable spool featuring a threaded connection system, which increases stability and reduces the risk of material tangling. The design is heat-resistant up to 100°C, ensuring durability during use. Additionally, the product was designed with reuse and a more environmentally friendly approach in mind. Manufacturer Anycubic Model IPHPFFW-101 Material PLA-CF Weight 1 kg Color white Curing recommended (55°C for 6–8 hours) Recommended nozzle diameter ≥ 0.4 mm Nozzle temperature 210–250°C Bed temperature 55–70°C Recommended print speed 40–250 mm/s Maximum flow rate 20 mm³/s Density 1.22 g/cm³ Melting point 165°C Vicat softening temperature 69°C Heat deflection temperature 60°C Tensile strength 44 ± 3 MPa Elongation at break 10.5 ± 1.5% Flexural strength 74 ± 5 MPa Impact resistance (Izod) 25 ± 2 kJ/m²

Sunlu PLA+ Silk Filament (Rainbow) 03Sunlu's rainbow-colored filament is an excellent choice for those who want to give their 3D prints a unique, glossy finish. The material creates a bright, shimmering surface, making models look exceptionally attractive without any additional finishing. A gradual color shift approximately every 8 meters gives each print a unique, rainbow-like appearance that catches the eye and highlights the design’s details.Precision and smooth printing without compromiseSunlu filament is designed for high precision and a stable printing process. The carefully wound spool minimizes the risk of filament tangling, ensuring smooth and trouble-free printer operation. The recommended nozzle temperature is 200–210°C, and the build plate temperature is 50–60°C, allowing for optimal results while maintaining good first-layer adhesion. You’ll achieve the best results at a print speed of 40–60 mm/s, ensuring that every detail is reproduced with high precision.Wide compatibility and ease of useThe filament is compatible with most FDM 3D printers, making it a versatile solution for both beginners and more advanced users. PLA+ material is easy to print with and stable, making it ideal for a wide range of projects—from decorations to more complex models. Additionally, the use of eco-friendly components makes it a more environmentally friendly choice.Well-maintained and properly preparedTo ensure the highest print quality, the filament should be dried at 50°C, which helps maintain its properties and prevents issues during printing. The practical spool design with multiple holes supports effective and even drying of the material. This ensures the filament maintains optimal performance, allowing you to focus on bringing your creative ideas to life without unnecessary complications. Manufacturer Sunlu Model PLA+ Silk R 03 Color Rainbow (03) Diameter 1.75 ± 0.02 mm Printing Temperature 205–215°C: 50–100 mm/s / 215–235°C: 100–200 mm/s Bed Temperature Apply adhesive before heating; once heated to 50–60°C, adhesive is not needed Air bubbles 100% bubble-free Weight 1 kg/spool Length 1.75 mm (1 kg) = 330 m

Sunlu PLA+ Silk Filament (Rainbow 02)Sunlu's rainbow-colored filament is an excellent choice for those who want to give their 3D prints a unique, glossy finish. The material creates a bright, shimmering surface, making the models look exceptionally attractive even without additional finishing. The gradual color change approximately every 8 meters gives each print a unique, rainbow-like appearance that catches the eye and highlights the design details.Precision and smooth printing without compromiseSunlu filament is designed for high precision and a stable printing process. The carefully wound spool minimizes the risk of filament tangling, ensuring smooth and trouble-free printer operation. The recommended nozzle temperature is 200–210°C, and the build plate temperature is 50–60°C, allowing for optimal results while maintaining good first-layer adhesion. You’ll achieve the best results at a print speed of 40–60 mm/s, ensuring that every detail is reproduced with high precision.Wide compatibility and ease of useThe filament is compatible with most FDM 3D printers, making it a versatile solution for both beginners and more advanced users. PLA+ material is easy to print with and stable, making it ideal for a wide range of projects—from decorations to more complex models. Additionally, the use of eco-friendly components makes it a more environmentally friendly choice.Well-maintained and properly preparedTo ensure the highest print quality, the filament should be dried at 50°C, which helps maintain its properties and prevents issues during printing. The practical spool design with multiple holes supports effective and even drying of the material. This ensures the filament maintains optimal performance, allowing you to focus on bringing your creative ideas to life without unnecessary complications. Manufacturer Sunlu Model PLA+ Silk R 02 Color Rainbow (02) Diameter 1.75 ± 0.02 mm Printing Temperature 205–215°C: 50–100 mm/s / 215–235°C: 100–200 mm/s Bed Temperature Apply adhesive before heating; once heated to 50–60°C, adhesive is not needed Air bubbles 100% bubble-free Weight 1 kg/spool Length 1.75 mm (1 kg) = 330 m

Sunlu PLA+ Silk Filament (Rainbow) 06Sunlu's rainbow-colored filament is an excellent choice for those who want to give their 3D prints a unique, glossy finish. The material provides a bright, shimmering surface, making the models look exceptionally attractive even without additional finishing. The gradual color change approximately every 8 meters gives each print a unique, rainbow-like appearance that catches the eye and highlights the design details.Precision and smooth printing without compromiseSunlu filament is designed for high precision and a stable printing process. The carefully wound spool minimizes the risk of filament tangling, ensuring smooth and trouble-free printer operation. The recommended nozzle temperature is 200–210°C, and the build plate temperature is 50–60°C, allowing for optimal results while maintaining good first-layer adhesion. You’ll achieve the best results at a print speed of 40–60 mm/s, ensuring that every detail is reproduced with high precision.Wide compatibility and ease of useThe filament is compatible with most FDM 3D printers, making it a versatile solution for both beginners and more advanced users. PLA+ material is easy to print with and stable, making it ideal for a wide range of projects—from decorations to more complex models. Additionally, the use of eco-friendly components makes it a more environmentally friendly choice.Well-maintained and properly preparedTo ensure the highest print quality, the filament should be dried at 50°C, which helps maintain its properties and prevents issues during printing. The practical spool design with multiple holes supports effective and even drying of the material. This ensures the filament maintains optimal performance, allowing you to focus on bringing your creative ideas to life without unnecessary complications. Manufacturer Sunlu Model PLA+ Silk R 06 Color Rainbow (06) Diameter 1.75 ± 0.02 mm Printing Temperature 205–215°C: 50–100 mm/s / 215–235°C: 100–200 mm/s Bed Temperature Apply adhesive before heating; once heated to 50–60°C, adhesive is not needed Air bubbles 100% bubble-free Weight 1 kg/spool Length 1.75 mm (1 kg) = 330 m

Sunlu PLA+ Silk Filament (Rainbow) 05Sunlu's rainbow-colored filament is an excellent choice for those who want to give their 3D prints a unique, glossy finish. The material creates a bright, shimmering surface, making the models look exceptionally attractive even without additional finishing. The gradual color change approximately every 8 meters gives each print a unique, rainbow-like appearance that catches the eye and highlights the design details.Precision and smooth printing without compromiseSunlu filament is designed for high precision and a stable printing process. The carefully wound spool minimizes the risk of filament tangling, ensuring smooth and trouble-free printer operation. The recommended nozzle temperature is 200–210°C, and the build plate temperature is 50–60°C, allowing for optimal results while maintaining good first-layer adhesion. You’ll achieve the best results at a print speed of 40–60 mm/s, ensuring that every detail is reproduced with high precision.Wide compatibility and ease of useThe filament is compatible with most FDM 3D printers, making it a versatile solution for both beginners and more advanced users. PLA+ material is easy to print with and stable, making it ideal for a wide range of projects—from decorations to more complex models. Additionally, the use of eco-friendly components makes it a more environmentally friendly choice.Well-maintained and properly preparedTo ensure the highest print quality, the filament should be dried at 50°C, which helps maintain its properties and prevents issues during printing. The practical spool design with multiple holes supports effective and even drying of the material. This ensures the filament maintains optimal performance, allowing you to focus on bringing your creative ideas to life without unnecessary complications. Manufacturer Sunlu Model PLA+ Silk R 05 Color Rainbow (05) Diameter 1.75 ± 0.02 mm Printing Temperature 205–215°C: 50–100 mm/s / 215–235°C: 100–200 mm/s Bed Temperature Apply adhesive before heating; once heated to 50–60°C, adhesive is not needed Air bubbles 100% bubble-free Weight 1 kg/spool Length 1.75 mm (1 kg) = 330 m

Sunlu PLA+ Silk Filament (Rainbow 01)SUNLU PLA+ Silk Filament (Rainbow 01) combines reliability, aesthetics, and ease of use to take 3D printing to a whole new level. With colors that smoothly transition approximately every 8 meters, each model gains a unique, rainbow gradient—without the need to change materials during printing. The silky finish gives prints an elegant sheen, and excellent layer adhesion ensures flawless results. With no nozzle clogging, bubbles, or filament tangling, you can focus solely on creating—not on technical issues.Smooth printing and reliability—print stress-free, every timeA precise 1.75 mm diameter with a tolerance of ±0.02 mm and low shrinkage guarantee even material feed and a stable printing process. As a result, SUNLU filament works flawlessly even on longer projects, eliminating the risk of errors and downtime. Wide compatibility with the most popular FDM printers (such as Bambu Lab, Creality, Prusa, and Anycubic) means you don’t have to worry about compatibility—just load the spool and start printing. Flexible temperature ranges (205–235°C) and speeds (50–200 mm/s) allow you to adjust settings to your needs and achieve optimal results.Creative freedom and unique style—projects that make an impressionThis filament was created with creativity in mind. The multicolored rainbow effect turns even simple models into eye-catching decorations, while more complex designs take on an artistic character. Perfect for printing ornaments, figurines, gadgets, or toys—it will delight both adults and children alike. Natural color transitions and an intense, vibrant palette make every print one-of-a-kind. If you want to create models that stand out from the crowd – SUNLU PLA+ Silk Rainbow is the choice that makes a difference. Manufacturer Sunlu Color Rainbow (Rainbow 01) Material PLA+ Silk Weight 1 kg Filament diameter 1.75 mm Diameter tolerance ±0.02 mm Printing temperature range 205–235°C Print speed 50–200 mm/s Color change approximately every 8 meters Visual effect Rainbow gradient, silky finish Layer adhesion High Shrinkage Low Compatibility FDM printers (Bambu Lab, Creality, Prusa, Anycubic, and others)