Sunlu pla filaments

Sunlu PLA Glow-in-the-Dark Filament (White-Blue)Sunlu PLA Glow-in-the-Dark Filament is an excellent choice for anyone looking to give their 3D prints a unique, eye-catching look. The material contains phosphorescent components that allow it to glow in the dark after absorbing light, creating a striking glow. The intensity of the effect is even greater after exposure to UV light, making this filament ideal for creating decorations, gadgets, decorative models, or elements that stand out after dark. However, keep in mind that this type of material should not be exposed to direct sunlight for long periods, as this can accelerate color fading.Precision You Can Rely OnSunlu has ensured high manufacturing precision for this filament, so the material delivers stable and predictable performance during printing. A diameter of 1.75 mm and dimensional accuracy of ±0.03 mm result in even filament feed and greater print consistency. This is particularly important for projects requiring an aesthetic finish and high repeatability. The 1 kg spool allows for convenient printing of both smaller models and more complex projects without the need for frequent material changes.Ready to useThe filament has been designed with your convenience and smooth printer operation in mind. Before packaging, it is dried for 24 hours and then placed in vacuum-sealed packaging with a desiccant inside a resealable nylon bag. This protection helps keep the material in optimal condition and reduces the risk of printing issues. As a result, Sunlu PLA Glow In The Dark supports clog-free and bubble-free printing, allowing you to focus fully on creating rather than troubleshooting technical issues.Wide CompatibilitySunlu PLA Glow In The Dark works with all popular FDM 3D printers that support 1.75 mm filament, so you can easily adapt it to your equipment. High manufacturing standards and tight diameter tolerances ensure the material works seamlessly with many devices, delivering stable and satisfying results. This is the perfect choice for users seeking a striking glow-in-the-dark material, as well as quality, reliability, and ease of use at every stage of printing. Manufacturer Sunlu Model PLA Glow W-Blu Color White-blue Filament diameter 1.75/3.0 mm Tolerance ±0.02 mm Printing temperature 200–210°C Bed temperature No heating: cover with adhesive / Heating 50–65°C: do not cover with adhesive Tensile strength (kgf) 11–16 (factory standard at 23°C, wire diameter 1.75 mm) Melting index 7–9 g/10 min (190°C, 2.16 kg) (according to GB/T 3682.1-2018) Elongation at break 4% (in-house standard at 23°C, wire diameter 1.75 mm) Melting temperature 165–180°C Heat deflection temperature 55°C Density g/cm³ 1.24 Water absorption 0.5% Recommended printing speed 50–100 mm/s Bubbles 100% bubble-free Weight 1 kg/roll Length 1.75 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) 3.0 mm (1 kg) = 110 m

Sunlu PLA Glow-in-the-Dark Filament (Blue)Sunlu PLA Glow-in-the-Dark Filament is an excellent choice for anyone looking to give their 3D prints a unique, eye-catching look. The material contains phosphorescent compounds that allow it to glow in the dark after absorbing light, creating a striking glow. The intensity of the effect is even greater after exposure to UV light, making this filament ideal for creating decorations, gadgets, decorative models, or elements that stand out after dark. However, keep in mind that this type of material should not be exposed to direct sunlight for long periods, as this can accelerate color fading.Precision You Can Rely OnSunlu has ensured high manufacturing precision for this filament, so the material delivers stable and predictable performance during printing. A diameter of 1.75 mm and dimensional accuracy of ±0.03 mm result in even filament feed and greater print consistency. This is particularly important for projects requiring an aesthetic finish and high repeatability. The 1 kg spool allows for convenient printing of both smaller models and more complex projects without the need for frequent material changes.Ready to useThe filament has been designed with your convenience and smooth printer operation in mind. Before packaging, it is dried for 24 hours and then placed in vacuum-sealed packaging with a desiccant inside a resealable nylon bag. This protection helps keep the material in optimal condition and reduces the risk of printing issues. As a result, Sunlu PLA Glow In The Dark supports clog-free and bubble-free printing, allowing you to focus fully on creating rather than troubleshooting technical issues.Wide CompatibilitySunlu PLA Glow In The Dark works with all popular FDM 3D printers that support 1.75 mm filament, so you can easily adapt it to your equipment. High manufacturing standards and tight diameter tolerances ensure the material works seamlessly with many devices, delivering stable and satisfying results. This is the perfect choice for users seeking an eye-catching glow-in-the-dark material, as well as quality, reliability, and ease of use at every stage of printing. Manufacturer Sunlu Model PLA Glow TB Color Blue Filament Diameter 1.75/3.0 mm Tolerance ±0.02 mm Printing Temperature 200–210°C Bed Temperature No heating: apply adhesive / Heating 50–65°C: do not apply adhesive Tensile Strength KGF 11–16 (factory standard at 23°C, wire diameter 1.75 mm) Melting rate 7–9 g/10 min (190°C, 2.16 kg) (according to GB/T 3682.1-2018) Elongation at break 4% (in-house standard at 23°C, wire diameter 1.75 mm) Melting temperature 165–180°C Heat deflection temperature 55°C Density g/cm³ 1.24 Water absorption 0.5% Recommended printing speed 50–100 mm/s Bubbles 100% bubble-free Weight 1 kg/roll Length 1.75 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) 3.0 mm (1 kg) = 110 m

Sunlu PLA Glow-in-the-Dark Filament (Green)Sunlu PLA Glow-in-the-Dark Filament is an excellent choice for anyone looking to give their 3D prints a unique, eye-catching look. The material contains phosphorescent components that allow it to glow in the dark after absorbing light, creating a striking glow. The intensity of the effect is even greater after exposure to UV light, making this filament ideal for creating decorations, gadgets, decorative models, or elements that stand out after dark. However, keep in mind that this type of material should not be exposed to direct sunlight for long periods, as this can accelerate color fading.Precision You Can Rely OnSunlu has ensured high manufacturing precision for this filament, so the material delivers stable and predictable performance during printing. A diameter of 1.75 mm and dimensional accuracy of ±0.03 mm result in even filament feed and greater print consistency. This is particularly important for projects requiring an aesthetic finish and high repeatability. The 1 kg spool allows for convenient printing of both smaller models and more complex projects without the need for frequent material changes.Ready to useThe filament has been designed with your convenience and smooth printer operation in mind. Before packaging, it is dried for 24 hours and then placed in vacuum-sealed packaging with a desiccant inside a resealable nylon bag. This protection helps keep the material in optimal condition and reduces the risk of printing issues. As a result, Sunlu PLA Glow In The Dark supports clog-free and bubble-free printing, allowing you to focus fully on creating rather than troubleshooting technical issues.Wide CompatibilitySunlu PLA Glow In The Dark works with all popular FDM 3D printers that support 1.75 mm filament, so you can easily adapt it to your equipment. High manufacturing standards and tight diameter tolerances ensure the material works seamlessly with many devices, delivering stable and satisfying results. This is the perfect choice for users seeking a striking glow-in-the-dark material, as well as quality, reliability, and ease of use at every stage of printing. Manufacturer Sunlu Model PLA Glow FG Color Green Filament diameter 1.75/3.0 mm Tolerance ±0.02 mm Printing temperature 200–210°C Bed temperature No heating: apply adhesive / Heating 50–65°C: do not apply adhesive Tensile strength KGF 11–16 (factory standard at 23°C, wire diameter 1.75 mm) Melting rate 7–9 g/10 min (190°C, 2.16 kg) (according to GB/T 3682.1-2018) Elongation at break 4% (in-house standard at 23°C, wire diameter 1.75 mm) Melting temperature 165–180°C Heat deflection temperature 55°C Density g/cm³ 1.24 Water absorption 0.5% Recommended printing speed 50–100 mm/s Bubbles 100% bubble-free Weight 1 kg/roll Length 1.75 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 330 m, 3.0 mm (1 kg) 3.0 mm (1 kg) = 110 m

Sunlu PLA+ Silk Tri-Color Filament (Red-Yellow-Green)The Sunlu PLA+ Silk Tri-Color filament in red-yellow-green is designed for those who want to give their 3D prints a unique, more striking look. Thanks to Multi Color technology, a single filament allows you to achieve multicolored results, and the finished models change their appearance depending on the angle of light and viewing perspective. It’s a great choice for decorative projects, figurines, gadgets, prototypes, and all projects where both precision and an original visual effect matter.Silky sheen and smooth finishThe filament stands out with its elegant, silky texture and smooth surface, which gives prints an aesthetic appearance. Vibrant, eye-catching colors combined with a glossy finish make projects look impressive right out of the printer, without the need for additional polishing. This allows every project to take on a more artistic, refined character, while saving you the time needed for post-processing.Greater strength, flexibility, and durabilitySunlu Silk PLA+ not only gives your prints an attractive appearance but also enhances their mechanical properties. The material offers up to 50 times the strength of standard PLA, making it highly flexible without the risk of breaking, impact-resistant without cracking, and featuring excellent compressive strength. This filament works well both for creating impressive display models and for more demanding projects where the durability of the finished print matters.Wide compatibility with FDM printersThe filament was designed for stable and trouble-free operation. Dimensional accuracy of +/- 0.02 mm, low shrinkage, and a uniform diameter ensure smooth material feeding and reliable printing results. Minimal diameter variations enhance compatibility with a wide range of devices, which is why Sunlu PLA+ Silk Dual Color works perfectly with most FDM 3D printers, including models from Bambu Lab, Creality, Prusa, and Anycubic. It is a solution that combines an eye-catching appearance, high quality, and the comfort of everyday use. Manufacturer Sunlu Model PLA+ Silk TC R Y G Color Red-Yellow-Green Density 1.23 g/cm³ Vicat softening temperature 54 °C Heat deflection temperature 57±3 °C Melting temperature 164 °C Melt flow rate 7±2.5 g/10 min Tensile strength 50±4 MPa Elongation at break 11±3% Flexural strength 78±5 MPa Flexural modulus 2600±300 MPa Impact resistance (X-Y) 78±5 kJ/m²

Sunlu PLA+ Silk Tri-Color Filament (Black-Gold-Purple)The Sunlu PLA+ Silk Tri-Color filament in black, gold, and purple is designed for those who want to give their 3D prints a unique, more striking look. Thanks to Multi Color technology, a single filament allows you to achieve multicolored results, and the finished models change their appearance depending on the angle of light and viewing perspective. It’s a great choice for decorative projects, figurines, gadgets, prototypes, and all projects where both precision and an original visual effect matter.Silky sheen and smooth finishThe filament stands out with its elegant, silky texture and smooth surface, which gives prints an aesthetic appearance. Vibrant, eye-catching colors combined with a glossy finish make projects look impressive right out of the printer, without the need for additional polishing. This allows every project to take on a more artistic, refined character, while saving you the time needed for post-processing.Greater strength, flexibility, and durabilitySunlu Silk PLA+ not only gives your prints an attractive appearance but also enhances their mechanical properties. The material offers up to 50 times the strength of standard PLA, making it highly flexible without the risk of breaking, impact-resistant without cracking, and featuring excellent compressive strength. This filament works well both for creating impressive display models and for more demanding projects where the durability of the finished print matters.Wide compatibility with FDM printersThe filament was designed for stable and trouble-free operation. Dimensional accuracy of +/- 0.02 mm, low shrinkage, and a uniform diameter ensure smooth material feeding and reliable printing results. Minimal diameter deviations enhance compatibility with a wide range of devices, which is why Sunlu PLA+ Silk Dual Color works perfectly with most FDM 3D printers, including models from Bambu Lab, Creality, Prusa, and Anycubic. It is a solution that combines an impressive appearance, high quality, and the comfort of everyday use. Manufacturer Sunlu Model PLA+ Silk TC B Go Pu Color Black-gold-purple Density 1.23 g/cm³ Vicat softening temperature 54 °C Heat deflection temperature 57±3 °C Melting temperature 164 °C Melt flow index 7±2.5 g/10 min Tensile strength 50±4 MPa Elongation at break 11±3% Flexural strength 78±5 MPa Flexural modulus 2600±300 MPa Impact resistance (X-Y) 78±5 kJ/m²

Sunlu PLA+ Silk Tri-Color Filament (Blue-Green-Purple)The Sunlu PLA+ Silk Tri-Color filament in blue-green-purple is designed for those who want to give their 3D prints a unique, more striking look. Thanks to Multi Color technology, a single filament allows you to achieve multicolored results, and the finished models change their appearance depending on the angle of light and viewing perspective. It’s a great choice for decorative projects, figurines, gadgets, prototypes, and all projects where both precision and an original visual effect matter.Silky sheen and smooth finishThe filament stands out with its elegant, silky texture and smooth surface, which gives prints an aesthetic appearance. Vibrant, eye-catching colors combined with a glossy finish make projects look impressive right out of the printer, without the need for additional polishing. This allows every project to take on a more artistic, refined character, while saving you the time needed for post-processing.Greater strength, flexibility, and durabilitySunlu Silk PLA+ not only gives your prints an attractive appearance but also enhances their mechanical properties. The material offers up to 50 times the strength of standard PLA, making it highly flexible without the risk of breaking, impact-resistant without cracking, and featuring excellent compressive strength. This filament works well both for creating impressive display models and for more demanding projects where the durability of the finished print matters.Wide compatibility with FDM printersThe filament was designed for stable and trouble-free operation. Dimensional accuracy of +/- 0.02 mm, low shrinkage, and a uniform diameter ensure smooth material feeding and reliable printing results. Minimal diameter variations enhance compatibility with a wide range of devices, which is why Sunlu PLA+ Silk Dual Color works perfectly with most FDM 3D printers, including models from Bambu Lab, Creality, Prusa, and Anycubic. It is a solution that combines an impressive appearance, high quality, and the comfort of everyday use. Manufacturer Sunlu Model PLA+ Silk TC Blu G P Color Blue-green-purple Density 1.23 g/cm³ Vicat softening temperature 54 °C Heat deflection temperature 57±3 °C Melting temperature 164 °C Melt flow rate 7±2.5 g/10 min Tensile strength 50±4 MPa Elongation at break 11±3% Flexural strength 78±5 MPa Flexural modulus 2600±300 MPa Impact resistance (X-Y) 78±5 kJ/m²

Sunlu PLA+ Silk Tri-Color Filament (Red-Yellow-Blue)The Sunlu PLA+ Silk Tri-Color filament in red-yellow-blue is designed for those who want to give their 3D prints a unique, more striking look. Thanks to Multi Color technology, a single filament allows you to achieve multicolored results, and the finished models change their appearance depending on the angle of light and viewing perspective. It’s a great choice for decorative projects, figurines, gadgets, prototypes, and all projects where both precision and an original visual effect matter.Silky sheen and smooth finishThe filament stands out with its elegant, silky texture and smooth surface, which gives prints an aesthetic appearance. Vibrant, eye-catching colors combined with a glossy finish make projects look impressive right out of the printer, without the need for additional polishing. This allows every project to take on a more artistic, refined character, while saving you the time needed for post-processing.Greater strength, flexibility, and durabilitySunlu Silk PLA+ not only gives your prints an attractive appearance but also enhances their mechanical properties. The material offers up to 50 times the strength of standard PLA, making it highly flexible without the risk of breaking, impact-resistant without cracking, and featuring excellent compressive strength. This filament works well both for creating impressive display models and for more demanding projects where the durability of the finished print matters.Wide compatibility with FDM printersThe filament was designed for stable and trouble-free operation. Dimensional accuracy of +/- 0.02 mm, low shrinkage, and a uniform diameter ensure smooth material feeding and reliable printing results. Minimal diameter deviations enhance compatibility with a wide range of devices, which is why Sunlu PLA+ Silk Dual Color works perfectly with most FDM 3D printers, including models from Bambu Lab, Creality, Prusa, and Anycubic. It is a solution that combines an impressive appearance, high quality, and the comfort of everyday use. Manufacturer Sunlu Model PLA+ Silk TC R Y Blu Color Red-Yellow-Blue Density 1.23 g/cm³ Vicat softening temperature 54 °C Heat deflection temperature 57±3 °C Melting temperature 164 °C Melt flow rate 7±2.5 g/10 min Tensile strength 50±4 MPa Elongation at break 11±3% Flexural strength 78±5 MPa Flexural modulus 2600±300 MPa Impact resistance (X-Y) 78±5 kJ/m²

Sunlu PLA+ Silk Tri-Color Filament (Orange-Blue-Green)The Sunlu PLA+ Silk Tri-Color filament in the red-yellow-green version is designed for those who want to give their 3D prints a unique, more striking look. Thanks to Multi Color technology, a single filament allows you to achieve multicolored results, and the finished models change their appearance depending on the angle of light and viewing perspective. It’s a great choice for decorative projects, figurines, gadgets, prototypes, and all projects where both precision and an original visual effect matter.Silky sheen and smooth finishThe filament stands out with its elegant, silky texture and smooth surface, which gives prints an aesthetic appearance. Vibrant, eye-catching colors combined with a glossy finish make projects look impressive right out of the printer, without the need for additional polishing. This allows every project to take on a more artistic, refined character, while saving you the time needed for post-processing.Greater strength, flexibility, and durabilitySunlu Silk PLA+ not only gives your prints an attractive appearance but also enhances their mechanical properties. The material offers up to 50 times the strength of standard PLA, making it highly flexible without the risk of breaking, impact-resistant without cracking, and featuring excellent compressive strength. This filament works well both for creating impressive display models and for more demanding projects where the durability of the finished print matters.Wide compatibility with FDM printersThe filament was designed for stable and trouble-free operation. Dimensional accuracy of +/- 0.02 mm, low shrinkage, and a uniform diameter ensure smooth material feeding and reliable printing results. Minimal diameter variations enhance compatibility with a wide range of devices, which is why Sunlu PLA+ Silk Dual Color works perfectly with most FDM 3D printers, including models from Bambu Lab, Creality, Prusa, and Anycubic. It’s a solution that combines an eye-catching appearance, high quality, and the convenience of everyday use. Manufacturer Sunlu Model PLA+ Silk TC O Blu G Color Orange-Blue-Green Density 1.23 g/cm³ Vicat softening temperature 54 °C Heat deflection temperature 57±3 °C Melting temperature 164 °C Melt flow rate 7±2.5 g/10 min Tensile strength 50±4 MPa Elongation at break 11±3% Flexural strength 78±5 MPa Flexural modulus 2600±300 MPa Impact resistance (X-Y) 78±5 kJ/m²