Power Supply Charger

Double the power and mobilityThe SkyRC T100 charger is a dual-channel charger capable of charging or discharging all the most common battery types. The clever design allows seamless connection to the balancer ports and the XT60 plug. The charger is small in size, but has as much as 100 watts of power to charge the battery at 5 amps. The charger also has AGM and cold charge modes for charging lead-acid and AGM batteries at lower temperatures.Two charging circuitsThe T100 allows 2 batteries to be connected, after which it will intelligently and automatically charge them to their maximum capacity. The batteries can have different specifications and be of completely different types.XT60 universal plugToday's most popular XT60 plug has been built into the T100 charger, allowing us to easily connect and charge commonly used batteries. The XT60 prevents the problem of reversed polarity and ensures a very stable connection.Greater accuracy in voltage readingThe charger software has been highly optimised, allowing the battery voltage to be displayed up to 3 decimal numbers. With the T100, you are in for an extremely precise voltage measurement during the charging process.AGM and cold charge modesAGM batteries are more robust and lighter than typical lead-acid batteries. Although both battery types share the same key components, their chemical structure makes them very different. For this reason, the T100 introduces a charging mode for AGM batteries. Never charge AGM batteries with a normal charger in Pb mode. In addition, the T100 introduces a COLD mode optimised for low temperatures.Included T200 charger Power cable Power supply AC 100-240 V Charging power 100 W (50W x 2) Discharge power 10W Battery type LiPo/LiIon/LiFe/LiHV 2-4S, NiMH/NiCd 6-8S, Pb 6/12V Battery capacity LiPo/LiIon/LiFe/LiHV 100-50000 mAh, NiMH / NiCd 100-50000 mAh, Pb 100-50000 mAh Charging current 0.1 - 5 A Charging voltage LiPo: 4.18-4.25V/cell, LiIon: 4.08-4.2V/cell, LiFe: 3.58-3.7V/cell LiHV: 4.25-4.5V/cell, NiMH/NiCD - Delta-Peak detection, Pb Normal: 2.4V/cell, Pb AGM: 2.45V, Pb Cold: 2.45V LiPo discharge voltage: 3.0-3.3V/cell, LiIon: 2.9-3.2V/cell, LiFe: 2.6-2.9V/cell LiHV: 3.1-3.4V/cell, NiMH/NiCD - 0.1-1.1V/cell Balancer 2-4S Housing material Plastic Dimensions 100 x 90 x 127 mm Weight 500 g Timer 1-170 minutes Operating temperature 0℃-40℃ Display 2x16 LCD with backlight External ports Balancer socket XH 2-4S, XT60 female , Podwójna moc i mobilnośćŁadowarka SkyRC T100 to dwukanałowa ładowarka, która jest w stanie naładować lub rozładować wszystkie najpopularniejsze typy akumulatorów. Przemyślana konstrukcja pozwala na bezproblemowe podłączenie do portów balansera i wtyczki XT60. Ładowarka jest niewielka, ale posiada aż 100 watów mocy, które pozwalają na ładowanie akumulatora prądem 5 amperów. Ładowarka posada również tryby ładowania AGM i zimny do ładowania akumulatorów kwasowo-ołowiowych i AGM w niższych temperaturach.Dwa obwody ładowaniaT100 pozwala na podłączenie 2 akumulatorów, po czym inteligentnie i automatycznie naładuje je do ich maksymalnej pojemności. Akumulatory mogą posiadać różną specyfikację i być całkowicie innego typu.Uniwersalny wtyk XT60Najpopularniejsza obecnie wtyczka XT60 została wbudowana w ładowarkę T100, dzięki czemu z łatwością podłączymy i naładujemy powszechnie używane akumulatory. XT60 zapobiega problemowi odwróconej biegunowości i zapewnia bardzo stabilne połączenie.Większa dokładność odczytu napięciaOprogramowanie ładowarki zostało wysoce zoptymalizowane, co pozwala na wyświetlanie napięcia akumulatora do 3 liczb po przecinku. Z T100 czeka cię niezwykła precyzja pomiaru napięcia podczas procesu ładowania.Tryby AGM i zimnego ładowaniaAkumulatory AGM są wytrzymalsze i lżejsze od typowych akumulatorów kwasowo-ołowiowych. Chociaż oba typy akumulatorów posiadają te same kluczowe elementy, ich chemiczna struktura sprawia, że bardzo się różnią. Z tego powodu w T100 wprowadzono tryb ładowania akumulatorów AGM. Nigdy nie ładuj akumulat

SkyRC S100neo AC/DC Smart ChargerThe SkyRC S100neo AC/DC Smart Charger is a compact and modern device designed to charge many types of batteries used in RC modeling, electronics, DIY projects, and more. It offers high charging power, AC and DC power support, and precise cell balancing. This allows the user to conveniently control the charging process, and the batteries work more stably and remain in good condition for a longer period of time.Compact design and clear displayThe housing is made of durable PC-ABS V0 material, ensuring good resistance to damage and high temperatures. The charger has compact dimensions of 105 × 105 × 62 mm and weighs approximately 340 g, so it fits easily on a modeler's workbench or in a carrying bag. The device is equipped with a 1.77-inch TN color display with a resolution of 128 × 160 pixels. The screen shows the most important information about the charging process – voltage, current, and battery status – allowing you to quickly check the operating parameters.High AC and DC charging powerThe SkyRC S100neo can operate with both mains power and an external DC power supply. In AC mode, the maximum charging power is 100 W, while with DC power it increases to 200 W. This makes the charger suitable for both home and field use, where battery or workshop power supplies are often used.Precise cell balancingThe device offers a balancing current of up to 1000 mA, which allows for effective equalization of voltages between battery cells. This ensures that the pack charges more evenly and reduces the risk of uneven cell wear. In practice, this means more stable battery performance and longer battery life.Support for multiple battery typesThe charger has been designed for universal use. It supports popular LiPo, LiHV, LiFe, and LiIon lithium batteries, as well as NiMH, NiCd, and Pb lead-acid batteries. The user can select the appropriate operating mode, such as charging, balancing, discharging, or storage mode, to suit the specific type of battery.Additional useful featuresThe SkyRC S100neo also offers a digital power supply (CC/CV) function, allowing the device to operate as a regulated power source. In addition, there is a brush motor break-in mode, which is useful in RC modeling. The built-in battery voltage meter makes it easy to quickly check the battery status before use. Manufacturer SkyRC Model S100neo Display Yes Display type TN; 1.77 inches Active area 28.03 × 35.04 mm Resolution 128 × 160 px Number of colors 262K Power supply DC: 6–30 V, AC: 100–240 V / 50–60 Hz Charging power AC: 100 W, DC: 200 W Discharge power up to 20 W (for 6S 4.2V/S pack) Supported batteries LiPo / LiHV / LiFe / LiIon: 1–6S; NiMH / NiCd: 1–15 cells; Pb: 3S / 6S / 12S Charging current 0.1–12.0 A Discharging current 0.1–2.0 A Balancing current up to 1000 mA Housing material PC-ABS V0 Dimensions 105 × 105 × 62 mm Weight 340 g

Charger B6AC NeoThe SkyRC B6AC Neo charger will surprise you with its vast capabilities. It can charge batteries with up to 200 watts (DC) or 60 watts (AC), as well as discharge them and monitor their condition. It stands out for its impressive performance and quiet operation, and thanks to the use of GaN technology it is extremely compact, making it much easier to transport. The device will also work well as a regular charger for a smartphone or laptop - it will provide power of up to 65 watts.Innovative GaN technology - high performance, small sizeThe charger uses innovative GaN technology, so it combines high performance, efficient heat dissipation and a compact design. The device is smaller than a standard credit card, allowing for convenient, hassle-free transportation. You can carry it with you at all times!Impressive powerForget about the long wait until your batteries are charged. When the charger is powered by direct current (DC), it provides up to 200 watts of power, allowing you to reduce charging time to about 10 minutes. On the other hand, if you use alternating current (AC), the device's power will be a maximum of 60 watts. This will allow you to charge the battery in about 20 minutes! What's more, the XT60 DC interface and compatibility with 100-240 V AC provides more flexibility and freedom. Note: measurements were taken while charging a 6S LiPo battery with a capacity of 1300 mAh.Discharge your battery in a few momentsNeed to discharge a battery quickly? No problem - the B6AC Neo charger is equipped with a special port for efficient, effective discharging. Combined with the main port, it provides up to 19 watts of power. What does this mean in practice? For example, it only takes about 1.5 hours to discharge a 1300 mAh LiPo 6S battery. Remember, however, that if you choose to use only the main port, the power will be limited to 5 watts.Check the condition of your batteriesMonitoring the condition of your batteries and taking proper care of them is the key to prolonging their life and ensuring your safety of use. The SkyRC B6AC Neo charger will help you do just that! With its help you can easily check the cell voltage and balance. This way you will always know if your battery needs charging, discharging or balancing! Note: the voltage and balance measurement function is available for LiPo, LiHV, LiFe and LiIon batteries.Universal charger and digital power supplyWith the SkyRC B6AC Neo charger you will charge not only your batteries, but also, for example, your smartphone, laptop or Nintendo Switch console. The device is equipped with an additional USB-C port, which supports PD 65 W fast charging. This allows your equipment to be up and running in no time! In addition, the B6AC Neo will prove itself as a digital power supply - it offers an optimal voltage of 2-27 V with 0.1 V increments and an adjustable current of 1-10 A.Performance and safetyThe charger uses a patented rectifier circuit to efficiently convert DC current for safe power supply. It also has a built-in MCU that precisely controls charging to minimize power loss. Its added advantage is an advanced protection system against short circuit, overheating and overvoltage, among others. So you can enjoy not only performance, but also safety!User-friendlyConvenient operation of the charger is made possible by the built-in display with the new ColorX interface, which features a clear, responsive menu and specially designed, easy-to-read icons. What's more, you can choose from up to 5 languages - English, Dutch, French, Chinese and Japanese. Also noteworthy is the quiet operation of the device - even at full load the volume level of its fans is only about 48 dB. Don't be afraid of annoying noise! There is also a dedicated Charger Master app, which, among other things, allows you to conveniently update the charger's software - just connect it to your computer via a USB-C port. Manufacturer SkyRC Name B6AC Neo Model SK-100200 Color Black Screen TN Screen diago

FullHD resolution for clear images 140° wide angle lens to capture everything in front of your car The G-sensor detects the impact and starts recording Parking monitor function - records when movement or impact is detected Lens type: 4 glasses 2.24 Chipset and sensor: GP5168 and F37 Field of view: 140 ° Screen: 1.5 inches Frame rate: max. 30 frames per second Sensor resolution: 2 megapixels Photo resolution: 12 megapixels Video compression: H.264 Video file type: MOV Auto Save: Yes G-Sensor: Yes Motion Detection: Yes Parking monitor: Yes Cycle recording: Yes, 1/3 / 5 minutes PC camera support: Yes (via miniUSB cable) Battery: 180 mAh Battery autonomy: up to 15 minutes Power supply: MicroUSB / MiniUSB - 5V 2.1A Installation: magnetic holder Holder attachment: 3M glue Operating conditions: -10 ° - 60 ° C Color black The package includes: Dash Patrol Dashcam DC1 Magnetic holder MicroUSB cable Dual USB Car Charger User manual Product weight: 56 g Product dimensions: 43.6 x 37.4 x 55 mm Total weight: 250 g Package dimensions: 15 x 11 x 7 cm

Battery kit for LOQED smart lockThe LOQED Power Kit is an eco-friendly and convenient power source created specifically for the LOQED Touch Smart Lock. The kit includes eight long-life AA batteries, an AC adapter and a three-meter cable that allows charging without removing the lock housing. This practical solution eliminates disposable batteries, reduces waste and ensures uninterrupted operation of the smart lock for up to twelve months. With the Power Kit, the LOQED lock operates even more economically, safely and environmentally friendly.Included 8 AA batteries (NiMH, rechargeable) AC adapter Power cord with a length of 3 meters Charging adapter User manual Manufacturer LOQED Model Power Kit Color Black Purpose Powering the LOQED Touch Smart Lock Type of cells AA NiMH (rechargeable) batteries Number of rechargeable batteries 8 pieces Operating time on a single charge up to 12 months Length of power cord 3 meters Power supply mains charger Charging method without removing the lock housing Application for indoor use only Additional features Eco-friendly alternative to disposable batteries, compact adapter design Compatibility LOQED Touch Smart Lock