Power Supply Charger

Aprašymas: Gamintojas: YT-81303 TRAVEL ADAPTER FOR OVER 150 COUNTRIES USB-C PD 65W Brand Yato Symbol YT-81303 Type universal socket and plugs with one QC3.0 USB-A + one PD USB-C socket Plug type I (AU, CN), G (UK), A (USA, JP), C (most EU) Socket type universal Material PC Colour black Grounding No Voltage 110-240 V a.c. Frequency 50/60 Hz Power 880 (at 110 V a.c.), 1840 (at 230 V a.c.) W Max. power 1840 W Max. current 8 A Min. current consumption 1500 mA Fuse 8A Protection class IP20 Electrical insulation class II Total max. output power of USB ports 65 (USB-C PD), 30 (USB-A Q.C. 3.0) W USB port output voltage 5, 9, 12, 20 V d.c. Max. USB port output current 3, 3.25 (USB-C PD), 4.5, 3, 2.5, 1.5 (USB-A Q.C. 3.0) A Child protection yes Weight 193 g Travel adapter adapted to the standard of over 150 countries with a built-in charger with three USB ports in fast charging technology. The built-in power supply with a total power of 65 W will replace chargers for phones, tablets and even business laptops. The lock prevents accidental insertion of the pins into the housing. The adapter is protected against short circuits with an easily accessible ceramic fuse. The housing is made of durable, flame-retardant plastic. Adapter Function: universal socket with child safety lock four types of plugs maximum power at 230 V: 1840 W ceramic fuse: 8 A dimensions: 68 x 53 x 52 mm spare fuse included Power Supply Function: maximum power: 65 W USB-C socket in PD technology (power delivery): 5V/3A, 9V/3A, 12V/3A, 20V/3.25A (max 65W) USB-A socket in Q.C. technology 3.0 (quick charge): 5V/4.5A, 9V/3A, 12V/2.5A, 20V/1.5A (max 30W) Note The adapter does not convert 230 V mains voltage to 110 V. Devices not adapted to work in the AC 100-250 V range may not work properly. Fast Charging Technology Almost all modern mobile devices such as smartphones or tablets support fast charging technology. The most popular of them are PD and Q.C. In short, this technology allows the battery to be charged with a higher voltage. A dedicated battery management system communicates with the charger, can determine its capabilities and adapt to them. Higher voltage allows charging with a lower current while maintaining the same or higher power. For example, at a voltage of 5 V and an intensity of 3 A we obtain 15 W of power, at a voltage of 9 V and an intensity of 2 A this power will be at the level of 18 W. At first glance, the difference in power is not big. However, it is important to remember the limitations of both the cable and the battery itself. The higher the current intensity, the more difficult it is for both the thin wires of the cable, its plugs, and the battery management system. For example, although the charger can supply 3 A of current at a voltage of 5 V, the cable and the battery management system in the phone will usually handle no more than 2 A, which will ultimately translate into a power of around 10 W. However, if we increase the voltage, e.g. to 9 V, then with the same charging current we will obtain 18 W, i.e. the device will charge almost twice as fast. Modern smartphones are increasingly supplied without chargers. The Yato universal travel adapter is not only an essential product for foreign travel, but also a high-quality fast charger with parameters confirmed by many tests, which we can safely charge both our smartphones and tablets. Download YT-813 User Manual

A classic in a new versioniMax B6 V2 is an updated version of the most popular charger among users of RC models and the first ever SkyRC brand. High quality charger with microprocessor-controlled charging, discharging and regulated DC power supply is compatible with all major battery types (LiPo / LiFe / Li-Ion, LiHV, NiMH, NICd, Pb). SkyRC iMAX b6 V2 now has a charging power of 60 W with a charging current up to 6 A. Additionally, it supports charging of batteries to DJI Mavic and DJI Inspire with a maximum charging power of 4 A.New functionsOn the iMAX b6 V2 charger screen you can now see an intuitive battery charge icon as well as a record of the percentage of battery charge. This makes it much easier to assess the level of charge and discharge of the battery.High quality microprocessorThe Cortex-M3 32-bit ARM Microprocessor Cortex-M3 high speed ensures smooth and fast data processing. Compared to the previous version, this means twenty times more possibilities. Using the proven 2.5 V - 5.5 V voltage range, the microprocessor also has strong anti-interference properties.DC converter / DCB6 V2 has a built-in DC power port, which can power devices with 60 W in the 5-26 V range and 1-6 A. Thanks to this charger, RC drivers have a useful gadget to power devices such as tire heaters, workshop lamps, etc.Charging of PB batteries in cold & AGM modeThe charger is able to charge AGM and lead-acid batteries at low temperatures.Thermal protectionThe internal chemical processes of the battery will increase its temperature. When the temperature exceeds a certain threshold, the charging process is interrupted. This function is available by connecting an optional temperature sensor, which must be purchased separately here. Included Specification iMax B6 V2 charger DC power cableDean charging cableCharging cable without connector Weight 238 gDC input voltage 11-18 VDimensions: 115 x 84 x 31 mmMax. Charging 60WMax. Discharge 5 WCharging current range 0.1-6.0 ADischarge current range 0.1-1.0 ACurrent consumption per target 300mA/cellBattery voltage PB 2-20VLiPo/LiFe/Lilon/LiHV number of cells charged 1-6SNiMH/NiCd number of cells charged 1-15S , Klasyk w nowej odsłonieiMax B6 V2 to unowocześniona wersja najpopularniejszej ładowarki wśród użytkowników modeli RC i pierwszej w historii marki SkyRC. Ładowarka o wysokiej jakości ze sterowanym mikroprocesorem ładowaniem, rozładowaniem i regulowanym zasilaniem DC jest kompatybilna ze wszystkimi głównymi typami akumulatorów (LiPo / LiFe / Li-Ion, LiHV, NiMH, NICd, Pb). SkyRC iMAX b6 V2 posiada teraz moc ładowania 60 W z prądem ładowania do 6 A. Dodatkowo obsługuje ładowanie akumulatorów do DJI Mavic i DJI Inspire z maksymalną mocą ładowania 4 A.Nowe funkcjeNa ekranie ładowarki iMAX b6 V2 można teraz zauważyć intuicyjną ikonę naładowania akumulatora, a także zapis procentowy naładowania akumulatora. Dzięki temu z dużą większą łatwością można ocenić poziom naładowania i rozładowania akumulatora.Wysokiej jakości mikroprocesor32-bitowy Mikroprocesor ARM Cortex-M3 o wysokiej szybkości zapewnia płynne i błyskawiczne przetwarzanie danych. W porównaniu z poprzednią wersją oznacza to dwudziestokrotnie większe możliwości. Korzystając ze sprawdzona zakresu napięcia 2,5 V - 5,5 V mikroprocesor posiada również silnie właściwości przezakłóceniowe.Konwerter DC / DCB6 V2 posiada wbudowany port zasilania DC, który posiada możliwość zasilania urządzeń mocą 60 W w zakresie napięcia 11-18 V i prądem 1-6 A. Dzięki tej ładowarce kierowcy RC posiadają użyteczny gadżet do zasilania takich urządzeń, jak podgrzewacze opon, lampy warsztatowe itp.Ładowanie akumulatorów PB w trybie zimnym & AGMŁadowarka jest w stanie naładować akumulatory AGM i akumulatory kwasowo-ołowiowe w niskich temperaturach.Zabezpieczenie termiczneWewnętrzne procesy chemiczna akumulatora spowodują wzrost jego temperatury. Gdy przekroczy ona ustalony próg proces ładowania zostaje przerwany. Ta funkcja jest dostępna po podłączeniu opcjonalnego czujnika temp

Aprašymas: Gamintojas: YT-085607 RECHARGEABLE FLASHLIGHT/9XAA 50W 5000LM Brand Yato Entity responsible for this product in the EU TOYA S.A.More Type COB LED Power 50 W Luminous flux 5000 / 2500 / 500 lm Working range 280 (high), 200 (medium), 95 (low) m Lighting modes 4: high, medium, low, pulse Zoom yes Material aluminum Lamp material PVC Lamp color transparent Dimensions 280x54 mm Color temperature 4500 K Switch yes Battery charge indicator yes Mechanical strength IK07 Degree protection IPX4 Power supply rechargeable, battery Battery type 9x1.5V; AA Battery type Li-Ion Battery capacity 2600 mAh Battery voltage 7.4 V d.c. Operating time 1 (high), 2 (medium), 8 (low) h Charging time 5 h Charger USB, USB type C Weight 570 g Symbol YT-085607 A durable aluminum flashlight with four operating modes that allow you to adjust the lighting to the activities performed and the battery charge level. The 50 W COB LED emits light up to 5000 lm, providing a lighting time of up to 8 hours and a range of up to 280 m. The width of the light beam can be adjusted with the zoom function in the head. Dual-powered flashlight – Li-Ion battery and AA batteries – ensures reliability in every situation, even after one energy source has run out. Light source: 50 W COB LEDs 3 basic lighting modes: high (5000 lm - 1 h), medium (2500 lm - 2 h), low (500 lm - 8 h) additional lighting mode: pulsating (double, quick press of the on/off button) light intensity: 5000, 2500, 500 lumens working range: 280 m (high), 200 m (medium), 95 m (low) zoom function allows you to adjust the light beam and adapt it to current needs lifespan: 10000 h Energy source: 2 independent energy sources: Li-Ion 2600 mAh battery, 7.4 V (total 5200 mAh) 9 AA 1.5 V batteries Li-Ion operating time: up to 8 h Li-Ion charging time: 5 h battery charge indicator in the on/off button (green and red light) cable: USB-C USB-C port built directly into the Li-Ion battery (can be charged outside the flashlight) Construction and features: mechanical strength: IK07 water resistance: IPX4 light color: 4500 K CRI: 67 on/off button - turns on the flashlight, changes operating modes, indicates battery charge level material: aluminum transparent PVC shade weight: 570 g (with Li-Ion battery) dimensions: 280 x 54 mm

Aprašymas: Gamintojas: Brand Yato Entity responsible for this product in the EU TOYA S.A.More Series GRF Rotations 8000 min⁻¹ Cutting width 250 / 300 mm Voltage 18 V d.c. Battery type Li-Ion Battery quantity lack Charger included no Head type string Cutting line diameter 1.6 mm Cutting line on the spool length 5 m Length of handle 1030-1230 mm Telescopic yes Charge level indicator yes Electric insulation class III Protection grade IPX0 Acoustic pressure 71.3 ± 2.24 dB(A) Acoustic power 91.3 ± 2.24 dB(A) Vibrations 1.014 ± 1.5 m/s² Weight 1.6 kg Symbol YT-85018 The battery-powered grass trimmer is a functional garden tool designed for precise finishing work where a traditional lawnmower does not provide adequate access. It allows for effective trimming of grass along edges, fences, walls, and around plants, providing a neat and well-maintained look to the area. The device's construction has been developed with the user's comfort and efficient operation in mind for domestic conditions. The high-speed brush motor ensures stable operation and effective cutting of grass of varying density. The adjustable telescopic tube and handle allow for the tool's length to be adjusted to the operator's height and the nature of the work being done, improving ergonomics and control. The low weight makes maneuvering the trimmer easier and reduces fatigue during longer use. The trimmer works with the YATO 18 V battery system, providing mobility and freedom of work without limitations from using a power cord. Main features and functions: Brush motor operating at speeds up to 8000 rpm ensures efficient and even cutting of grass. Stable rotations allow for precise trimming in hard-to-reach areas and around small garden architectural elements Efficient cutting system based on a line head for precise mowing of grass. It handles a 1.6 mm line, with a 5 m line length included in the set. Available working diameters of 10" (250 mm) and 12" (300 mm) allow for adjusting the cutting width to current needs Telescopic tube adjustment in the range of 0-208 ± 2 mm and telescopic handle extendable from 1030 to 1230 mm allow for optimal adjustment of the tool to the user's height, improving work comfort and ergonomics while operating the trimmer Battery power compatible with the entire YATO 18 V system provides complete mobility and work convenience in every corner of the garden. The battery charge indicator allows for real-time monitoring of energy levels, reducing downtime between work cycles Battery compatibility allows the tool to be powered by a battery of any capacity (2 Ah-9 Ah) from the YATO 18 V series, and a fast charger provides the necessary energy for work in a short time Ergonomic design promotes convenient operation and one-handed work in precision-requiring areas. The compact build facilitates maneuvering and storing the device, and the trimmer's weight of 1.6 kg (without the battery) ensures comfort during long grass trimming sessions Applications: trimming grass along fences, walls, and borders maintaining areas around flower beds, shrubs, and trees keeping order in hard-to-reach areas gardening tasks in domestic gardens and allotments Technical data: catalog number: YT-85017 engine type: brush rotational speed: 8000 rpm cutting diameter: 10" (250 mm), 12" (300 mm) head type: line line diameter: 1.6 mm line length in the set: 5 m telescopic tube: 0-208 ± 2 mm telescopic handle: 1030-1230 mm net weight: 1.6 kg (without the battery) product dimensions: 103.1 x 28 x 18.6 cm packaging dimensions: 104.2 x 24.5 x 21.5 cm (1 pc./carton) power supply: battery-powered, YATO 18 V system Available versions: YT-85017 - set with a 2 Ah battery and fast charger, ready to use right away YT-85018 - tool only, with the option to power it with any YATO 18 V series battery

Performance characteristics Charger Type: Domestic Charger Compatibility: Universal Power supply type: AC Number of USB Type-C ports: 1 USB Power Delivery: Yes USB power supply up to: 65 W Construction Product color: White Packaging data Package width: 138 mm Pack depth: 48 mm Package height: 173 mm Package Weight: 320 g Amount in the package: 1 pc Logistics data Harmonized System (DS) code: 85044095

Aprašymas: Gamintojas: Brand Yato Entity responsible for this product in the EU TOYA S.A.More Series GRF Rotations 0-2900 min⁻¹ Voltage 18 V d.c. Battery type Li-Ion Battery quantity lack Charger included no Max. cutting thickness in wood 120 mm Max. cutting capacity in metal 6 mm Toolholder type standard Holder size 1/2" (12.7 mm) Saw blade stroke 25.4 mm Speed adjustment yes Electronic rotation adjustment no Work area lighting no Electric insulation class III Protection grade IPX0 Acoustic pressure 88.0 ± 5.0 dB(A) Acoustic power 96.0 ± 5.0 dB(A) Vibrations 11.63 ± 1.5 / 9.59 ± 1.5 m/s² Weight 1.6 kg Symbol YT-828154 A cordless sabre saw designed for users who need a tool that is lightweight, mobile, and efficient. The handy construction weighing 1.6 kg allows comfortable handling of the tool in hard-to-reach places, while the adjustable rotational speed allows precise adjustment of the cutting speed to the material and type of work, ensuring stable, controlled cutting. The saw is suitable for a wide range of applications - from workshop and service work, through assembly, to construction. Thanks to the 25.4 mm blade stroke, it is possible to efficiently cut wood up to 120 mm thick and metal up to 6 mm. It is indispensable for dismantling wooden structures, trimming beams, cutting steel or aluminum pipes, as well as for installation and renovation work, including in the field where access to the electrical network is limited. The Li-Ion 18 V battery power supply provides full mobility, allowing work without cables on construction sites, in workshops, or when servicing machines and structures. The IPX0 protection class allows for use in dry conditions, while the 1/2" (12.7 mm) tool holder ensures the universality of blade replacement. Operating parameters: rotational speed 0-2900 rpm with the possibility of adjustment allows precise adjustment of the cutting speed to the material and type of work battery power Li-Ion 18 V provides freedom to work without cables and the possibility of working in the field max. cutting depth - in wood up to 120 mm and in metal up to 6 mm - suitable for most construction and renovation works tool holder: 1/2" (12.7 mm) blade stroke 25.4 mm ensures quick and precise cutting protection class IPX0 allows tool operation in dry conditions lightweight and handy construction weighing 1.6 kg allows comfortable use Available in two versions: YT-828153 - with a 2 Ah battery and charger, ready to use immediately YT-828154 - tool only, ideal for owners of the YATO 18 V system