Power Supply Charger

Technical details Main Software: Navitel Navigator Pre-installed maps: 47 maps Ability to download additional maps: yes Free map updates: Yes Route calculation function: yes Route time calculation: yes Speed ​​camera warning: yes functions Three alternative routes: Yes Voice Prompts: Yes Screen Screen size: 5" Screen type: TFT Screen resolution: 480×272 Touch Screen: Yes Screen illumination: yes Technical specifications Operating system: Linux CPU: MStar MSB2531, Cortex-A7 CPU frequency: 800 MHz Antenna: Internal Navigation system: GPS Waterproof: No Memory RAM: 128 MB DDR3 ROM: 8GB Flash. Memory card type: microSDHC Maximum card size: 32 GB feed Battery type: built-in lithium-ion Battery capacity: 800 mAh Connecting an external power source (12/24 V): yes Power supply: to the navigator Interfaces Wi-Fi: no Connector: mini USB Headphone jack: mini jack General Fastening to the windshield: suction cup Attachment to the holder: mechanical Stand Bracket: Yes Location of the pen: in the case of the navigator Including: NAVITEL E501 personal navigation device Car holder (windshield) Car charger 12V Mini-USB cable Pen User Guide Warranty card

SkyRC D100neo ChargerThe SkyRC D100neo Charger is equipped with 2 ports, allowing simultaneous charging with a power of 200W when using DC power supply. It supports various types of batteries, including LiPo, LiFe, Li-ion, LiHV, NiMH, and NiCd, and provides voltage balancing function with an accuracy of ±0.02V. The device's performance is also influenced by the high-resolution color display and user-friendly interface, ensuring ease of use. The product is also equipped with a USB-C port with 20W Power Delivery for fast charging. Advanced protective features ensure safe operation.Impressive Power in a Compact FormEach of the D100neo ports supports a current of up to 10A, allowing for fast and efficient charging of 2 batteries simultaneously. Thanks to intelligent power management, the charger maintains stability and accuracy of charging even at full load, ensuring evenly charged cells and extending their lifespan. The device's output power is up to 200W (requires DC power supply), further increasing energy renewal efficiency. Despite impressive specifications, the product stands out with its compact design, being 40% smaller than standard chargers. It also features a color display with an impressive 76,800 pixels, providing convenient access to essential information.Optimal Power ManagementThe SkyRC D100neo Charger combines efficient charging with up to 25W of power and advanced discharging with voltage balancing capability, ensuring optimal battery condition and longevity. The device automatically allocates power between the ports, maximizing the charging efficiency of individual batteries and providing fast charging when using both ports simultaneously. It also provides balancing accuracy up to ±0.02V, guaranteeing voltage optimization for each cell, crucial for extending their lifespan and maintaining full capacity.VersatilityThe D100neo can operate in both AC and DC modes. When powered by AC, power is dynamically distributed between the ports up to a total of 100W, while with DC power supply, each port can reach a full 100W, significantly speeding up the charging process. When both ports are used simultaneously, the charger intelligently manages available power. After one port completes charging, the other receives increased power, maximizing the efficiency of the entire process. Additionally, the device can function as a digital power source with adjustable voltage and current, making it suitable not only for hobbyists but also for electronics enthusiasts and DIYers.Fast ChargingWith the USB-C PD 3.0 port supporting up to 20W of power, RC model enthusiasts can enjoy significantly accelerated charging for their devices, such as smartphones, tablets, and 2020 MacBook Airs.Safety and User-FriendlinessProtection against overcharging and overloading ensures complete safety during charger operation. An innovative thermal system allows the Arm Cortex-M4 processor to operate at high loads without generating disturbing noise. The ColorX interface guarantees ease of use and allows settings adjustments in multiple languages. Additionally, firmware updates can be performed smoothly and effortlessly through USB-C, ensuring that the device is always up to date with the latest software. Another advantage is the universal input voltage (from 110V to 220V), allowing you to take the D100neo model on your travels.Seamless ConnectionThe USB-C port allows for convenient connection of the D100neo charger to a PC or Mac. Using the Charger Master app, you can customize charging parameters, monitor battery status, and optimize performance. Furthermore, software updates are performed smoothly, making it easy to enhance your charger's capabilities. Manufacturer SkyRC Model SK-100199-01 SIZE AND WEIGHT Case Material PC-ABS V0 Case Size 116 x 110 x 79 mm Weight 470 g DISPLAY Display Type TN Size 2.8 inches Panel Active Area 43.20 x 57.60 mm Resolution 240x320 pixels Number of Colors 262,000 POWER DC Input Voltage 10-30V AC Input Voltage 100-240V Charg

Double the power and mobilityThe SkyRC T200 charger has the most compact design, taking up minimal space, the tick of a pair of batteries. The charger delivers 100 watts of integrated power through each charging circuit. Behind the tasteful casing is enough power to charge two batteries simultaneously at up to 12 amps per channel, so you'll be pumping life into a wide range of batteries in no time, from receiver packs to 6S lithium polymer or NiMH and NiCD 15S batteries. What's more, the charger provides all the programmability you expect from a modern high-end charger. Multiply efficiencyBoth charging channels can be programmed and operated individually. The T200 allows two batteries to be charged intelligently, automatically and simultaneously to their maximum capacity. What's more, the cells being charged do not have to have the same configuration or be of the same type. Feel completely free to choose which packs to charge. Compatibility and universal XT60 plugThe charger has a charging algorithm that allows it to work with the most common battery types - LiPo, LiIon, LiHV, LiFe, NiMH, NiCD and Pb. The XT60 interface prevents reverse polarity and ensures a very stable connection.Optimised softwareThe SkyRC T200 has a so-called AUTO function, which automatically sets the current during charging and discharging. For lithium batteries in particular, the function helps prevent overcharging, which can lead to an explosion due to the user. The function automatically shuts down the circuit and informs the user when an abnormality is detected. All programmes on the T200 are controlled by a two-way signal to ensure maximum safety and minimise problems. All settings can be configured by the user.Intuitive operationA panel of five buttons and a brightly illuminated LCD screen make operation of the unit effortless, even for inexperienced users. The charging programmes work in a similar way to other SkyRC chargers, but even if this is your first contact with a programmable charger, you will easily move between parameters by using the up and down arrows to set values and then clicking enter to confirm.Versatility with AGM and cold modesAGM batteries are easy to maintain, are very stable and lighter than other lead-acid batteries. Although they have the same structure, the difference in chemical components translates into a big difference in performance. AGM batteries should not be charged with a normal charger in Pb mode. Cold mode allows the battery to be charged at a low temperature.Adjustable terminal voltageThe SkyRC T200 allows users to change the terminal voltage (for advanced users only).Special handleThe charger is equipped with a special handle. Its compact design at less than 1 kg makes it the most convenient charger to carry.Included T200 charger Power cable Power supply DC 11-18 V, AC 100-240 V Charging power 100 W x 2 Discharge power 10 W Battery type LiPo/LiIon/LiFe/LiHV 1-6S, NiMH/NiCd 1-15S, Pb 2-20V Battery capacity LiPo/LiIon/LiFe/LiHV 100-50000 mAh, NiMH / NiCd 100-50000 mAh, Pb 100-50000 mAh Charging current 0,1 - 12 A Discharge current 0,1 - 2 A Charging voltage LiPo: 4.18-4.25V/cell, LiIon: 4.08-4.2V/cell, LiFe: 3.58-3.7V/cell LiHV: 4.25-4.5V/cell, NiMH/NiCD - Delta-Peak detection, Pb Normal: 2.4V/cell, Pb AGM: 2.45V, Pb Cold: 2.45V Discharge voltage LiPo: 3.0-3.3V/cell, LiIon: 2.9-3.2V/cell, LiFe: 2.6-2.9V/cellLiHV: 3.1-3.4V/cell, NiMH/NiCD - 0.1-1.1V/cell Balancer 2-6S Housing material Plastic Dimensions 178 x 135 x 96 mm Weight 850 g Timer 1-120 minutes Operating temperature 0℃-40℃ Display 2x16 LCD with backlight External ports XH 1-6S balancer socket, temperature sensor port, battery port, DC input , Podwójna moc i mobilnośćŁadowarka SkyRC T200 posiada najbardziej kompaktowa konstrukcję, zajmując minimalną ilość miejsca, tyko tyle co para akumulatorów. Ładowarka dostarcza 100 watów zintegrowanej mocy przez każdy z obwodów ładowania. Za gustowną obudową znajduje się wystarczająca moc, by ładować jednocześnie dwa

New functionSkyRC PC520 is a charger designed specifically for charging drones with a built-in power supply. The device is able to charge 6S LiPo batteries with a built-in balancer and use battery storage mode. During operation, the charge/discharge data is displayed in real time on the LED display, which also informs about charging errors. Maximum charging safety is ensured by the safety features, including protection against short circuiting and incorrect polarity. The maximum PC520 has a maximum charge power of 520 W and a maximum current of 20 A. Included: SkyRC Charger PC520 Power Cable XT90 charging cables with banana Weight 1.6 kg AC input voltage 100-240 V Power 520 W Charging current range 1.0 - 20 A LiPo number of loaded cells 6 S Dimensions 200 x 132 x 59 mm , Zaprojektowana do dronówSkyRC PC520 to ładowarka zaprojektowana specjalnie do ładowania dronów z wbudowanym zasilaczem. Urządzenie jest w stanie ładować akumulatory LiPo 6S z wbudowanym balanserem i stosować tryb przechowywania akumulatora (storage). Podczas pracy dane ładowania/rozładoawnia w czasie rzeczywistym są wyświetlone na wyświetlaczu LED, który informuje również o błędach ładowania. Maksymalne bezpieczeństwo ładowania zapewniają zabezpieczenia, w tym ochrona przed spięciem obwodu i nieprawidłową biegunowością. Maksymalna moc ładowania PC520 wynosi 520 W, a prąd ładowania można regulować w zakresie 1 - 20 A.W zestawie: Ładowarka SkyRC PC520 Kabel zasilający Kable ładowania XT90 z banankiem Waga 1,6 kg Wejściowe napięcie AC 100-240 V Moc 520 W Zakres prądu ładowania 1.0 - 20 A LiPo ilość ładowanych celi 6 S Wymiary 200 x 132 x 59 mm

10.1 inch quad-core Android tablet with Android 10GO 10.1-inch capacitive touchscreen with resolution: 1024x600 - 16:9 1.2GHZ quad-core RK3226 processor 16 GB / 2 GB (Memory / RAM) Micro SD card slot Integrated WI-FI 802.11 b/g/n connection. Full access to Google Playstore. Bluetooth 4 function Camera - 0.3 pixels Integrated rechargeable battery - 4400 mAh Connections: MicroUSB for charging, MicroSD card slot, 3.5 mm headphone output Power supply: 230V charger Size: 28.00 (L) X 16.50 (W) X 4.50 (H) cm

USB-C hub with 9 ports, if you lack (or need to expand) slots on your PC, laptop, MacBook, tablet, or if you need to connect/disconnect multiple devices centrally via one connection Removable legs for space saving or transport Rubberized feet for a secure non-slip stand Plug and play, no manual software/driver installation required Compatible with Thunderbolt 3/4 (lightning bolt icon) Power is via USB Ports: 4x USB-A: e.g. external hard drive, USB flash drive, mouse, keyboard, printer 1x USB-C power supply: e.g. PD charger, PD power supply, PD power supply unit 1x HDMI™: for connection to e.g. monitor, TV, projector 1x LAN/Ethernet: e.g. wired internet network connections 1x SD card reader: e.g. SD, SDHC, SDXC memory cards 1x microSD card reader: e.g. microSD, microSDHC, microSDXC memory cards Requirements Operating system: Windows 11/10/8/7 and Mac OS from 10.8 To use the USB-C charging function, the device must support USB Power Delivery (USB PD) or Thunderbolt 3/4. To use the monitor function over HDMI™, the device must support DisplayPort Alternate Mode (DP Alt Mode), Thunderbolt 3/4 or USB4. Dimensions Case width: 28.2 cm Body height: 3.3 cm Body depth: 6 cm Cable length: 0.2 m Number of ports 5 Type of ports USB 3.2 Gen 1 USB standard USB-A, USB-C Fast charging Power Delivery Feeding USB Dimensions (cm) 28.2 x 3.3 x 6 Color Gray

Design LED Desk Lamp with Inductive Charging Station/Qi Wireless Charger and USB Connections Unique design with energy-saving LED technology Side LED panel (120° adjustable) for softer and more even lighting The lamp head can be turned sideways 180 ° Touch sensor with adjustable brightness from 10% to 100% and adjustable light temperature from 2700K to 6500K for pleasant lighting Inductive charging station for wireless charging for all Qi-enabled smartphones or devices with Qi-compatible covers 2 Smart Quick USB ports for charging your smartphone or tablet and connecting mobile devices, for example. the speaker Power consumption: 120 W Dimensions: approx. 275mm x 60mm x 320mm (folded) Power consumption: Max: 60 W (power supply) Min: 0.5 W (LEDs off, devices not connected) Maximum power: USB connections, total: 5 V, max. 2 A, DC (DC) Qi wireless port: 5V, max. 2 A, DC (DC) Energy efficiency class: A Luminaire: 108 Osram / Philips high power LEDs, max. 5 W total power Illumination: 950 lux at a distance of 30 cm (adjustable) Color temperature: 2700K to 6500K, warm white / cool white (adjustable)

USB-C hub with 9 ports, if you lack (or need to expand) slots on your PC, laptop, MacBook, tablet, or if you need to connect/disconnect multiple devices centrally via one connection Removable legs for space saving or transport Rubberized feet for a secure non-slip stand Plug and play, no manual software/driver installation required Compatible with Thunderbolt 3/4 (lightning bolt icon) Power is via USB Ports: 4x USB-A: e.g. external hard drive, USB flash drive, mouse, keyboard, printer 1x USB-C data: e.g. external hard drive, USB flash drive, mouse, keyboard, printer 1x USB-C power supply: e.g. PD charger, PD power supply, PD power supply unit 2x HDMI™: for connection to e.g. monitor, TV, projector 1x LAN/Ethernet: e.g. wired internet network connections Requirements Operating system: Windows 11/10 and Mac OS 10.8 or later To use the USB-C charging function, the device must support USB Power Delivery (USB PD) or Thunderbolt 3/4. To use the monitor function over HDMI™, the device must support DisplayPort Alternate Mode (DP Alt Mode), Thunderbolt 3/4 or USB4. The MST function over HDMI™ only works with current Microsoft Windows operating systems. Dimensions Case width: 26.4 cm Body height: 2.94 cm Body depth: 6 cm Cable length: 0.2 m Number of ports 6 Type of ports USB 3.2 Gen 1 USB standard USB-A, USB-C Fast charging Power Delivery Feeding USB Dimensions (cm) 26.4 x 2.94 x 6 Color Gray

2UUL PC01 POWER MAX 200W Multi-Port Charger Adjustable Voltage Power Supply PlugEU Plug

2UUL PC01 POWER MAX 200W Multi-Port Charger Adjustable Voltage Power Supply PlugUS Plug

SkyRC D200neo ChargerGet acquainted with the D200neo, a device that provides instant charging with up to 35A of current. It is designed to save users' time, as it is always ready to go. This advanced device is comfortable to use, thanks to its built-in color display. In addition, it intelligently and dynamically distributes charging power. The D200neo also supports USB-C 3.0 Power Delivery (PD), enabling faster and more efficient charging.Fast and smart chargingThe D200neo provides dual-port parallel charging with a lightning fast charging current of up to 35A. It is designed to save your time to the maximum. This device is always ready for action! Thanks to an innovative combination of software and MCU, D200neo provides supercharging. It also intelligently and dynamically distributes charging power when both ports are active simultaneously. When only one port is active, D200neo will direct all its power to that one port, guaranteeing optimal and fast charging. In addition, it also supports USB-C 3.0 Power Delivery (PD) for even faster and more efficient charging.More optionsThe SkyRC device is equipped with dual ports that operate independently, providing efficient and simultaneous charging of two batteries. What's more, the D200neo offers the flexibility to choose between AC and DC input, adapting to different scenarios. In AC mode, it provides charging power of up to 200W, while in DC mode, the output increases up to 800W. In addition, you can choose DC charging at 800W for the greatest efficiency, or use AC charging at 200W to tailor its performance to your specific needs. The D200neo is an absolute revolution in the world of RC chargers.Professional chargerThe D200neo is not only a professional charger, but also a high-quality digital power supply. At the click of a menu, the D200neo is ready to go, offering optimal voltage from 5-27V with 0.1V increments and adjustable current from 1 to 15A. Additional protections against short circuit, overload and reverse polarity ensure safety and peace of mind during use. What's more, the D200neo is equipped with a 200 MHz ARM microcontroller, which is able to increase the resolution of the ADC to 16 bits thanks to its oversampling technology. A powerful PID mechanism precisely adjusts the current, providing a responsiveness and accuracy of charging current that is unmatched by most standard devices on the market.All information at your fingertips SkyRC has a built-in display with ColorX interface, which makes the information presented in color, making it much easier to operate the device. When working with the BD350, the D200neo can use the customized SkyRC Charger Master to display or export the battery discharge curve in real time. This makes it possible to compare and analyze the discharge curves of different batteries to accurately detect faulty batteries. NOTE: The BD350 and SkyRC Charger Master are not part of the kit.Thoughtful design Thanks to its universal input voltage circuit, you can take the SkyRC device with you on any trip, no matter where you go! In addition, this product is designed and approved to meet global standards for safety, electromagnetic compatibility and other mandatory regulatory requirements. With SkyRC, you are always ready to travel!Easy controlThe D200neo, connected to a PC or Mac via USB-C, allows monitoring and control via the SkyRC Charger Master app. You can also update the charger as OTA and synchronize the latest software in real time with a dedicated cloud. Charging and discharging data can be analyzed and displayed in a graph. The interface is currently available in English, Dutch, Chinese, French and Japanese. Users can easily change it with simple clicks, making SkyRC use even more convenient. Manufacturer. SkyRC Model SK-100196 Dimensions 116 × 110 × 79 mm Material Plastic Weight 602 g Display type TN Display size 2.8-inch Resolution 240 x RGB x 320 pixels Number of colors 262 thousand. DC input voltage 10-30 V AC input voltage 100-240 V C