Power Supply Charger

FNIRSI DPS150 DC programmable mini laboratory power supplyThe FNIRSI DPS150 is a compact, programmable laboratory power supply that combines high functionality with a portable form factor. The device provides voltage and current regulation, features an easy-to-read IPS screen (In-Plane Switching, a matrix that uses liquid crystals aligned in parallel, thus providing rich and perfectly reproduced colors), a number of protections, and the ability to power from various sources - from classic DC power supplies to powerbanks with Power Delivery function. Thanks to its varied operating modes and support for computer control, it will be suitable for both service and amateur and educational applications.Efficient cooling and stable operationThe power supply uses high-grade thermally conductive silicon with a thermal conductivity coefficient of 3.0 W/m-K, which ensures efficient heat dissipation from power components. The aluminum chassis acts as a passive heat sink to maintain stable performance even under prolonged operation and heavy load. The FNIRSI DPS150 has a complete set of protections that protect both the power supply and connected devices. Among other things, it offers protection against overvoltage (OVP), overload (OCP), short circuit (SCP), overheating (OTP) and input and output voltage reversal.Convenient operationThe built-in 2.8-inch color IPS screen offers high resolution (320×240 px) and 90° rotation for convenient use. The display shows voltage, current, power, temperature and energy counters in real time. Depending on preference, the user can switch between graphical modes and the classic numerical view. The DPS150 allows the user to save up to 6 preset profiles of voltage and current settings. This allows you to instantly switch between operating modes, which significantly speeds up testing of different circuits or components.High precisionThe power supply is characterized by very low noise - ripple below 20 mV. This is crucial when powering audio, microprocessor or sensitive sensor circuits. Thanks to digital regulation and built-in control system, voltage and current parameters are very stable and accurate.Universal connection and various power supply methodsThe power supply's outputs support cables with 4mm banana plug terminals, U-type fork terminals and classic copper wires. Robust metal screw sockets guarantee secure contact and low transition resistance, which translates into accuracy and safe operation. The device can be powered either from a classic DC 5-32V power supply, or via a USB-C connector with PD (Power Delivery, USB-C fast charging technology) or QC (Quick Charge, a fast charging standard that significantly reduces battery charging time without compromising battery life), such as from a powerbank or laptop charger. This allows the DPS150 to be used without access to a power grid, increasing its use in service or field work.Included cable with crocodile clamp x2 USB cable user manual Manufacturer Fnirsi Model DPS-150 Input voltage DC 5.0 V - 32 V Input current 100 mA - 5 A Resolution Voltage: 10 mV; Current: 1 mA Reading accuracy Input voltage: ≤0.2% ±5 mV; Output voltage: ≤0.1% ±10 mV; Output current: ≤0.1% ±5 mA (for 0-3.5 A range) Operating environment Temperature: 0 °C - 40 °C; Relative humidity: 0% - 75% RH Display 2.8 inches (320×240 pixel resolution) Output Voltage: 0 - 30 V; Current: 0 - 5 A; Power: 0 - 150 W. Setting accuracy Voltage: ≤0.1% ±5 mV; Current: ≤0.1% ±3 mA Stability with load changes 0,49% Efficiency at full load 96,30% Dimensions 106 × 76 × 28 mm Weight Approximately 178 g

Construction Number of simultaneously connected devices (max.): 3 Product color: Black Charger Compatibility: Universal Built-in flashlight: Yes International Protection (IP) Code: IPX4 Protection features: Waterproof Energy management Solar Panel Power: 7.5 W Performance characteristics Battery technology: Lithium polymer (LiPo) Battery capacity: 20000 mAh Charging source: Sunny USB power supply up to: 20W Battery capacity (watt hours): 74 Wh USB Power Delivery: Yes Connection Micro-USB connector: Yes USB A output ports: 2 Input interface: Micro USB Number of micro-USB connections: 1 USB Type C connector: Yes Number of USB Type-C ports: 1 USB Type A connector: Yes Packaging data Amount in the package: 1 pc Package Weight: 750 gr Package width: 111 mm Pack depth: 31 mm Package height: 202 mm Package contents Added cables: USB Type A connector to USB Type C connector adapter Instruction: Yes Technical data Harmonized System (DS) Code: 85078000

Features Device type: Universal Automatic: No Product color: Black Loudspeaker: Yes Echo cancellation: Yes Maximum operating range: 30 years Signal to Noise Ratio (SNR): 65 dB Cable length: 1.1 years Integrated LED: Yes LED indicators: Status Range: 3 years Loudspeaker Sensitivity: -38 dB Output power: 5 W Frequency range: 100 - 16000 Hz Resistance: 4 Ω Microphone Number of microphones: 3 Microphone Directional Type: Versatile Connection Communication technology: Wireless Interface: bluetooth Bluetooth: Yes Bluetooth version: 5.0 USB connection: USB type A Energy management Power supply type: Battery Battery capacity: 2000 mAh Chat time: 5 h Standby time: 180 h Battery life: 10 a.m Charger voltage: 5V Current: 0.5 A Weight and dimensions Width: 120 mm Length: 120 mm Height: 35 mm Weight: 252 g Packaging data Package width: 158 mm Pack depth: 147 mm Package height: 54 mm Package Weight: 377 g Package contents Quantity: 1 Added cables: USB Quick Start Guide: Yes Storage case: Yes USB physical key included: Yes

Technical details Main Software: Navitel Navigator Pre-installed maps: 47 maps Ability to download additional maps: yes Free map updates: Yes Route calculation function: yes Route time calculation: yes Speed ​​camera warning: yes functions Three alternative routes: Yes Voice Prompts: Yes Screen Screen size: 5" Screen type: TFT Screen resolution: 480×272 Touch Screen: Yes Screen illumination: yes Technical specifications Operating system: Linux CPU: MStar MSB2531, Cortex-A7 CPU frequency: 800 MHz Antenna: Internal Navigation system: GPS Waterproof: No Memory RAM: 128 MB DDR3 ROM: 8GB Flash. Memory card type: microSDHC Maximum card size: 32 GB feed Battery type: built-in lithium-ion Battery capacity: 800 mAh Connecting an external power source (12/24 V): yes Power supply: to the navigator Interfaces Wi-Fi: no Connector: mini USB Headphone jack: mini jack General Fastening to the windshield: suction cup Attachment to the holder: mechanical Stand Bracket: Yes Location of the pen: in the case of the navigator Including: NAVITEL E501 personal navigation device Car holder (windshield) Car charger 12V Mini-USB cable Pen User Guide Warranty card

Double the power and mobilityThe SkyRC T200 charger has the most compact design, taking up minimal space, the tick of a pair of batteries. The charger delivers 100 watts of integrated power through each charging circuit. Behind the tasteful casing is enough power to charge two batteries simultaneously at up to 12 amps per channel, so you'll be pumping life into a wide range of batteries in no time, from receiver packs to 6S lithium polymer or NiMH and NiCD 15S batteries. What's more, the charger provides all the programmability you expect from a modern high-end charger. Multiply efficiencyBoth charging channels can be programmed and operated individually. The T200 allows two batteries to be charged intelligently, automatically and simultaneously to their maximum capacity. What's more, the cells being charged do not have to have the same configuration or be of the same type. Feel completely free to choose which packs to charge. Compatibility and universal XT60 plugThe charger has a charging algorithm that allows it to work with the most common battery types - LiPo, LiIon, LiHV, LiFe, NiMH, NiCD and Pb. The XT60 interface prevents reverse polarity and ensures a very stable connection.Optimised softwareThe SkyRC T200 has a so-called AUTO function, which automatically sets the current during charging and discharging. For lithium batteries in particular, the function helps prevent overcharging, which can lead to an explosion due to the user. The function automatically shuts down the circuit and informs the user when an abnormality is detected. All programmes on the T200 are controlled by a two-way signal to ensure maximum safety and minimise problems. All settings can be configured by the user.Intuitive operationA panel of five buttons and a brightly illuminated LCD screen make operation of the unit effortless, even for inexperienced users. The charging programmes work in a similar way to other SkyRC chargers, but even if this is your first contact with a programmable charger, you will easily move between parameters by using the up and down arrows to set values and then clicking enter to confirm.Versatility with AGM and cold modesAGM batteries are easy to maintain, are very stable and lighter than other lead-acid batteries. Although they have the same structure, the difference in chemical components translates into a big difference in performance. AGM batteries should not be charged with a normal charger in Pb mode. Cold mode allows the battery to be charged at a low temperature.Adjustable terminal voltageThe SkyRC T200 allows users to change the terminal voltage (for advanced users only).Special handleThe charger is equipped with a special handle. Its compact design at less than 1 kg makes it the most convenient charger to carry.Included T200 charger Power cable Power supply DC 11-18 V, AC 100-240 V Charging power 100 W x 2 Discharge power 10 W Battery type LiPo/LiIon/LiFe/LiHV 1-6S, NiMH/NiCd 1-15S, Pb 2-20V Battery capacity LiPo/LiIon/LiFe/LiHV 100-50000 mAh, NiMH / NiCd 100-50000 mAh, Pb 100-50000 mAh Charging current 0,1 - 12 A Discharge current 0,1 - 2 A Charging voltage LiPo: 4.18-4.25V/cell, LiIon: 4.08-4.2V/cell, LiFe: 3.58-3.7V/cell LiHV: 4.25-4.5V/cell, NiMH/NiCD - Delta-Peak detection, Pb Normal: 2.4V/cell, Pb AGM: 2.45V, Pb Cold: 2.45V Discharge voltage LiPo: 3.0-3.3V/cell, LiIon: 2.9-3.2V/cell, LiFe: 2.6-2.9V/cellLiHV: 3.1-3.4V/cell, NiMH/NiCD - 0.1-1.1V/cell Balancer 2-6S Housing material Plastic Dimensions 178 x 135 x 96 mm Weight 850 g Timer 1-120 minutes Operating temperature 0℃-40℃ Display 2x16 LCD with backlight External ports XH 1-6S balancer socket, temperature sensor port, battery port, DC input , Podwójna moc i mobilnośćŁadowarka SkyRC T200 posiada najbardziej kompaktowa konstrukcję, zajmując minimalną ilość miejsca, tyko tyle co para akumulatorów. Ładowarka dostarcza 100 watów zintegrowanej mocy przez każdy z obwodów ładowania. Za gustowną obudową znajduje się wystarczająca moc, by ładować jednocześnie dwa

10.1 inch quad-core Android tablet with Android 10GO 10.1-inch capacitive touchscreen with resolution: 1024x600 - 16:9 1.2GHZ quad-core RK3226 processor 16 GB / 2 GB (Memory / RAM) Micro SD card slot Integrated WI-FI 802.11 b/g/n connection. Full access to Google Playstore. Bluetooth 4 function Camera - 0.3 pixels Integrated rechargeable battery - 4400 mAh Connections: MicroUSB for charging, MicroSD card slot, 3.5 mm headphone output Power supply: 230V charger Size: 28.00 (L) X 16.50 (W) X 4.50 (H) cm

USB-C hub with 9 ports, if you lack (or need to expand) slots on your PC, laptop, MacBook, tablet, or if you need to connect/disconnect multiple devices centrally via one connection Removable legs for space saving or transport Rubberized feet for a secure non-slip stand Plug and play, no manual software/driver installation required Compatible with Thunderbolt 3/4 (lightning bolt icon) Power is via USB Ports: 4x USB-A: e.g. external hard drive, USB flash drive, mouse, keyboard, printer 1x USB-C power supply: e.g. PD charger, PD power supply, PD power supply unit 1x HDMI™: for connection to e.g. monitor, TV, projector 1x LAN/Ethernet: e.g. wired internet network connections 1x SD card reader: e.g. SD, SDHC, SDXC memory cards 1x microSD card reader: e.g. microSD, microSDHC, microSDXC memory cards Requirements Operating system: Windows 11/10/8/7 and Mac OS from 10.8 To use the USB-C charging function, the device must support USB Power Delivery (USB PD) or Thunderbolt 3/4. To use the monitor function over HDMI™, the device must support DisplayPort Alternate Mode (DP Alt Mode), Thunderbolt 3/4 or USB4. Dimensions Case width: 28.2 cm Body height: 3.3 cm Body depth: 6 cm Cable length: 0.2 m Number of ports 5 Type of ports USB 3.2 Gen 1 USB standard USB-A, USB-C Fast charging Power Delivery Feeding USB Dimensions (cm) 28.2 x 3.3 x 6 Color Gray

Design LED Desk Lamp with Inductive Charging Station/Qi Wireless Charger and USB Connections Unique design with energy-saving LED technology Side LED panel (120° adjustable) for softer and more even lighting The lamp head can be turned sideways 180 ° Touch sensor with adjustable brightness from 10% to 100% and adjustable light temperature from 2700K to 6500K for pleasant lighting Inductive charging station for wireless charging for all Qi-enabled smartphones or devices with Qi-compatible covers 2 Smart Quick USB ports for charging your smartphone or tablet and connecting mobile devices, for example. the speaker Power consumption: 120 W Dimensions: approx. 275mm x 60mm x 320mm (folded) Power consumption: Max: 60 W (power supply) Min: 0.5 W (LEDs off, devices not connected) Maximum power: USB connections, total: 5 V, max. 2 A, DC (DC) Qi wireless port: 5V, max. 2 A, DC (DC) Energy efficiency class: A Luminaire: 108 Osram / Philips high power LEDs, max. 5 W total power Illumination: 950 lux at a distance of 30 cm (adjustable) Color temperature: 2700K to 6500K, warm white / cool white (adjustable)